steel type eevee

The types of wire ropes can be divided into many ways: 1. ** According to usage **: Including general purpose steel wire rope (including plated steel strand), elevator steel wire rope, aviation steel wire rope, drilling well equipment steel wire rope, aerial ropeway and cable car steel wire rope, lifting steel wire rope, pre-stressed concrete steel wire rope, fishing steel wire rope, mine lifting steel wire rope, tire steel wire rope (tire steel cord), tape steel wire rope, etc. 2. ** Divided by diameter **: It can be divided into thick diameter (large size, diameter greater than 60mm), thin diameter (small size, diameter less than 8mm), and ordinary diameter (medium size, diameter range 8.0 - 60mm). 3. ** According to the type of rope core **: There are metal rope cores, natural fiber cores (such as hemp cores, cotton cores and other organic fiber cores), synthetic fiber cores (such as man-made fiber cores such as nylons), plastic integral rope cores, rod-shaped rope core steel wire ropes, and rubber core steel wire ropes. 4. ** According to the basic structure **: including single-twisted steel wire rope (single-strand steel wire rope), double-twisted steel wire rope (ordinary steel wire rope), and three-twisted steel wire rope (steel cable). 5. ** According to the twisting structure and twisting characteristics **: point-contact wire rope (non-parallel-twisted wire rope), line-contact wire rope (parallel-twisted wire rope), and face-contact wire rope. 6. ** According to certain properties, such as loose and non-loose steel wire rope, rotating/micro-rotating/non-rotating steel wire rope, high strength/high toughness steel wire rope, wear-resistant/corrosion-resistant steel wire rope, soft steel wire rope. 7. ** According to the twisting direction (twisting method), there are: Right Same-direction Stranding (ZZ) steel wire rope, Left Same-direction Stranding (SS) steel wire rope, Right Cross Stranding (2S) steel wire rope, Left Cross Stranding (SSS) steel wire rope, and internationally, there are also mixed-direction Stranding steel wire ropes. 8. ** According to the cross-section shape of the strand: round strand wire rope and special-shaped strand wire rope. 9. ** Divided by cross-section shape **: There are round steel wire ropes and flat steel wire ropes. 10. ** According to the contact state of the steel wires **: point contact with the steel wire rope, line contact with the steel wire rope (including point-line contact with the steel wire rope). 11. ** According to the cross-section shape of the steel wire **: It can be divided into steel wire ropes made of round steel wire and steel wire ropes made of special-shaped steel wire (such as sealed steel wire ropes). 12. ** According to the surface condition of the steel wire **: divided into smooth steel wire and plated steel wire. 13. ** According to the mechanical properties of the steel wire **: There are special steel wire and No.1 steel wire. 14. ** Divided by the number of strands **: including single-strand, six-strand, eight-strand, twelve-strand, eighteen-strand, thirty-four-strand, etc. Among them, twelve-strand and eighteen-strand wire ropes are composed of two layers of strands, and thirty-four-strand wire ropes are also called non-rotating wire ropes. 15. ** Divided according to twisting direction and method **: Twist left and right according to the direction of twisting the strand. The twisting method of the wire rope is divided into alternating twisting (reverse twisting) and same-direction twisting (forward twisting). 16. ** According to strength classification **: Different countries have different rating standards. For example, China and Japan have different strength classification for round strand and abnormal strand wire ropes. "The Island of Life" is also a wonderful novel. Everyone is welcome to read it!

The following are some H-beam models and their theoretical weights: - National standard H-shaped steel: - H100*100*6*8, unit weight 17.2kg/m, cross-section area 21.9mm2. - H125*125*6.5*9, unit weight 23.8kg/m, cross-section area 30.31mm2. - H150*150*7*10, unit weight 31.9kg/m, cross-section area 40.55mm2. - H175*175*7.5*11, unit weight 40.3kg/m, cross-section area 51.43mm2. - H200*200*8*12, unit weight 50.5kg/m, cross-section area 64.28mm2. - European standard H-type steel: - The 100-meter weight of the HFA was 16.7 kg. - The HEB weighed 20.4KG for 100m. - The 120-meter HUA weighed 19.9KG. - HEB 120m, 26.7KG. - The 140-meter HFA weighed 24.7 kg. - HEB 140m, 33.7KG. - The 160-meter HUA weighed 30.4 kg. - HEB 180m, 51.2KG. - The 180-meter HUA weighed 35.5 kg. - HEB 180m, 51.2KG. - The 200-meter HFA weighed 42.3 kg. - HEB 200m, 61.3KG. - The 220-meter HUA weighed 50.5 kg. - HEB220 meters, 71.5 kg. - The 240-meter HUA weighed 60.3 kg. - HEB 240m, 83.2KG. - The 260-meter HUA weighed 68.2 kg. - HEB260 meters, 93KG. - The 280-meter HUA weighed 76.4 kg. - HEB280 meters, 103KG. - The 300-meter HFA weighed 88.3 kg. - HEB300 meters, 117KG. - The 400-meter HUA weighed 125KG. - HEB400 meters, 155KG. - The 500-meter HUA weighed 155KG. - HEB500 meters, 187KG. - The 600-meter HUA weighed 178KG. - HEB600 meters, 212KG. The novel "Watching the Moon on Fish Island" is equally exciting. Everyone is welcome to click and read it!

C-type steel was a type of steel with a cross-section that resembled the English letter "C". It was formed by hot coiling and cold bending. It has a thin wall and light weight, excellent cross-section performance and high strength. The C-type steel was automatically processed and formed by the C-type steel forming machine. The forming machine could automatically complete the forming process according to the given C-type steel size. Its processing process included feeding, straightening, forming, setting, straightening, measuring length, punching the circular holes of the drawing bars, punching the oval connecting holes, forming and cutting, and so on. There are many types of C-type steel, such as zinc-plated C-type steel, hot-dip Galvanized cable tray C-type steel, glass card slot C-type steel, glass curtain wall C-type steel, cable slot C-type steel, reinforced C-type steel, double-hug C-type steel, single-sided C-type steel, manual fork lift C-type steel, unequal C-type steel, straight side C-type steel, bevelled C-type steel, inner rolled side C-type steel, inner bevelled side C-type steel, roof (wall) purlin C-type steel, car profile C-type steel, highway column C-type steel, solar support C-type steel (21 - 80 series), template support C-shaped steel, precision C-shaped steel for equipment, etc. The purlins were divided into five specifications of 80, 100, 120, 140, and 160 according to different heights. The length could be determined according to the engineering design, but considering the transportation and installation conditions, the total length was generally not more than 12 meters. C-type steel was widely used in purlins and wall beams of steel structures. It could also be combined into lightweight roof frames, supports, and other building components. In addition, it could also be used in the light industry of machinery manufacturing columns, beams, and arms. The novel "Watching the Moon on Fish Island" is equally exciting. Everyone is welcome to click and read it!

The following is the theoretical weight table of some H-shaped steel (2017 standard): |specification| Unit weight (kg/m)| Cross Section Area (mm2)| |----|----|----| |H W 100*100*6*8|17.2|21.9| |125*125*6.5*9|23.8|30.31| |150*150*7*10|31.9|40.55| |175*175*7.5*11|40.3|51.43| |200*200*8*12|50.5|64.28| The novel "Watching the Moon on Fish Island" is equally exciting. Everyone is welcome to click and read it!

The following is the theoretical weight table of some H-shaped steel: - National standard part: - H100 * 100 * 6 * 8: unit weight 17.2kg/m, cross-section area 21.9mm2. - H125 * 125 * 6.5 * 9: unit weight 23.8kg/m, cross-section area 30.31mm2. - H150 * 150 * 7 * 10: unit weight 31.9kg/m, cross-section area 40.55mm2. - H175 * 175 * 7.5 * 11: unit weight 40.3kg/m, cross-section area 51.43mm2. - H200 * 200 * 8 * 12: unit weight 50.5kg/m, cross-section area 64.28mm2. - European standard HUA series: - The specifications of the HEA100 were 96 * 100 * 5.0 * 8.0, and the weight per meter was 16.7kg. - The specifications of the HEA120 were 114 * 120 * 5.0 * 8.0, and the weight per meter was 19.9kg. - The specifications of the HEA140 were 133 * 140 * 5.5 * 8.5, and the weight per meter was 24.7kg. - The specifications of the HEA160 were 152 * 160 * 6.0 * 9.0, and the weight per meter was 30.4kg. - The specifications of the HEA180 were 171 * 180 * 6.0 * 9.5, and the weight per meter was 35.5kg. - The specifications of the HEA200 were 190 * 200 * 6.5 * 10.0, and the weight per meter was 42.3kg. - HEA220 specifications: 210 * 220 * 7.0 * 11.0, 50.5kg per meter. - The specifications of the HEA240 were 230 * 240 * 7.5 * 12.0, and the weight per meter was 60.3kg. - The specifications of the HEA260 were 250 * 260 * 7.5 * 12.5, and the weight per meter was 68.2kg. - The specifications of the HEA280 were 270 * 280 * 8 * 13.0, and the weight per meter was 76.4kg. - The specifications of the HEA300 were 290 * 300 * 8.5 * 14, and the weight per meter was 88.3kg. - The specifications of the HEA340 were 330 * 300 * 9.5 * 16.5, and the weight per meter was 105 kg. - The specifications of the HEA400 were 390 * 300 * 11 * 19, and the weight per meter was 125 kg. - The specifications of the HEA500 were 490 * 300 * 12 * 23, and the weight per meter was 88.3kg. - The specifications of the HEA650 were 640 * 300 * 13.5 * 26.0, and the weight per meter was 190 kg. - The specifications of the HEA700 were 690 * 300 * 14.5 * 27.0, and the weight per meter was 204 kg. - The specifications of the HEA800 were 790 * 300 * 15.0 * 28.0, and the weight per meter was 224 kg. - The specifications of the HEA900 were 890 * 300 * 16 * 30.0, and the weight per meter was 252 kg. - European standard HEB series: - HEB100 specifications: 100 * 100 * 6 * 10, meter weight: 20.4kg. - HEB120 specifications: 120 * 120 * 6.5 * 11, meter weight: 26.7kg. - HEB140 specifications: 140 * 140 * 7 * 12, weight: 33.7kg. - HEB160 specifications: 160 * 160 * 8 * 13, meter weight: 42.6kg. - HEB180 specifications: 180 * 180 * 8.5 * 14, weight: 51.2kg. - HEB200 specifications 200 * 200 * 9 * 15, meter weight 61.3kg. - HEB220 specifications: 220 * 220 * 9.5 * 16, 71.5kg per meter. - HEB240 specifications: 240 * 240 * 10 * 17, weight: 83.2kg. - HEB260 specifications: 260 * 260 * 10 * 17.5, meter weight: 93 kg. - HEB280 specifications: 280 * 280 * 10.5 * 18, weighing 103 kg per meter. - HEB300 specifications: 300 * 300 * 11 * 19, 117 kg per meter. - HEB320 specifications: 320 * 300 * 11.5 * 20.5, 127 kg per meter. - HEB340 specifications: 340 * 300 * 12 * 21.5, 134 kg per meter. - HEB360 specifications: 360 * 300 * 12.5 * 22.5, weight: 142 kg. - HEB400 specifications: 400 * 300 * 13.5 * 24, 155 kg per meter. - HEB450 specifications 450 * 300 * 14 * 26, meter weight 171 kg. - HEB500 specifications 500 * 300 * 15.5 * 28, meter weight 187 kg. - HEB550 specifications 550 * 300 * 15 * 29, meter weight 199 kg. - HEB600 specifications 600 * 300 * 15.5 * 30, meter weight 212 kg. - HEB650 specifications: 650 * 300 * 16 * 31, 225 kg per meter. - HEB700 specifications 700 * 300 * 14 * 32, meter weight 241 kg. - HEB800 specifications: 800 * 300 * 17.5 * 33, meter weight: 262 kg. - HEB900 specifications: 900 * 300 * 18.5 * 35, meter weight: 291 kg. The novel "Watching the Moon on Fish Island" is equally exciting. Everyone is welcome to click and read it!

The following is the theoretical weight of some H-shaped steel: H W。100*100*6*8 17.2 21.9。125*125*6.5*9 23.8 30.31。150*150*7*10 31.9 40.55。175*175*7.5*11 40.3 51.43。200*200*8*12 50.5 64.28。200*204*12*12 56.7 72.28。250*250*9*14 72.4 92.18。# 250*255*14*14 82.2 104.7。# 294*302*12*12 85 108.3。 If you need a more comprehensive form, you can go to the official website of Risheng Steel and search for "Risheng Steel" to obtain the "H-shaped steel theoretical weight table" of the standard of the national standard. In addition to the theoretical weight of 17 standards, there are 98 standard theoretical weight values and various important parameters. The novel " Watching the Moon on Fish Island " is equally exciting. Everyone is welcome to click and read it!

The following are some of the H-beam models: 1. According to domestic classification: - HN: The ratio of the height of H-shaped steel to the width of the wing is greater than or equal to 2. It is mainly used for beams. The use of I-shaped steel is equivalent to HN steel. In terms of construction and civil engineering applications, it is suitable for bending components such as steel beams. - Hm: The ratio of the height of H-shaped steel to the width of the wing is roughly 1.33 - 1.75. It is mainly used in steel structures as steel frame columns. It is used as a frame beam in frame structures that bear dynamic loads, such as equipment platforms. - HH: The height of H-shaped steel was basically the same as the width of the wing. It was mainly used for steel-core columns (also known as rigid steel columns) in reinforced concrete frame structures. It was mainly used for columns in steel structures. 2. European standard H-shaped steel model and weight per meter (Laigang/imported from Europe): - The weight of a 100-meter HFA was 16.7 kg, and the weight of a 100-meter HEB was 20.4 kg. - 120 meters for HFA weighed 19.9 kg, 120 meters for HEB weighed 26.7 kg; - The weight of the 140-meter HFA was 24.7KG, and the weight of the 140-meter HEB was 33.7KG. - The weight of the 160-meter HFA was 30.4 kg, and the weight of the 180-meter HEB was 51.2 kg. - The weight of the 180-meter HFA was 35.5 kg, and the weight of the 180-meter HEB was 51.2 kg. - The weight of the 200-meter HFA was 42.3KG, and the weight of the 200-meter HEB was 61.3KG. - The weight of the 220-meter HFA was 50.5 kg, and the weight of the 220-meter HEB was 71.5 kg. - The weight of the 240-meter HEA was 60.3 kg, and the 240-meter HEB was 83.2 kg. - The weight of the 260-meter HEA was 68.2 kg, and the 260-meter HEB was 93KG. - The weight of the 280m HFA was 76.4KG, and the 280m HEB was 103kg. - The weight of the 300-meter HFA is 88.3 kg, and the weight of the 300-meter HEB is 117KG. - The weight of a 400-meter HFA is 125KG, and the weight of a 400-meter HEB is 155KG. - The weight of a 500-meter HFA is 155KG, and the weight of a 500-meter HEB is 187KG. - The 600-meter weight of the HEA was 178KG, while the 600-meter weight of the HEB was 212KG. The representation of H-shaped steel included the height, width, thickness of the web and wing plates. For example, the 150*150 model could be expressed as 150*150*7*10, and the 250*175 model could be expressed as 244*175*7*14. Different types of H-shaped steel have different uses in different building structural components. Its size composition series is reasonable and the model is complete, which is easy to design and choose. The novel "Watching the Moon on Fish Island" is equally exciting. Everyone is welcome to click and read it!

The following is an example of the theoretical weight of some H-shaped steel: |Dimension (web height h* wing width b* web thickness t1* wing thickness t2)| Weight (unit not indicated. Two sets of data are given in the example. For specific units, please refer to relevant standards)| |----|----| |100*100*6*8|17.2、21.9| |125*125*6.5*9|23.8、30.31| |150*150*7*10|31.9、40.55| |175*175*7.5*11|40.3、51.43| |200*200*8*12|50.5、64.28| |200*204*12*12|56.7、72.28| |250*250*9*14|72.4、92.18| |250*255*14*14|82.2、104.7| |294*302*12*12|85、108.3| The theoretical weight calculation formula is: weight per meter (kg)=(web height h* web thickness t1+ wing width b* wing thickness t2*2)*0.00785. For more details, you can search for "Risheng Steel" and go to the official website of Risheng Steel to check the "H-type steel theoretical weight table" of the standard of the standard of the weight of the standard of the The novel "Watching the Moon on Fish Island" is equally exciting. Everyone is welcome to click and read it!

The following is the theoretical weight data of some H-beam steel: |specification| Theoretic weight (kg)| |----|----| |H W 100*100*6*8|17.2| |H W 125*125*6.5*9|23.8| |H W 150*150*7*10|31.9| |H W 175*175*7.5*11|40.3| |H W 200*200*8*12|50.5| |H W 200*204*12*12|56.7| |H W 250*250*9*14|72.4| |H W 250*255*14*14|82.2| |H W 294*302*12*12|85| At the same time, the theoretical weight of the H-shaped steel was calculated as: weight (kg)=(web height h* web thickness t1 + wing width b* wing thickness t2*2)*0.00785. In addition, you can search for "Risheng Steel" on its official website to obtain the "H-shaped steel theoretical weight table" of the standard of the national standard. In addition to the theoretical weight of 17 standards, there are 98 standard theoretical weight values and various important parameters. The novel "Watching the Moon on Fish Island" is equally exciting. Everyone is welcome to click and read it!

The following is the theoretical weight table and specifications of some H-shaped steel: - Part of the domestic specifications: - HW100x100: H (height) and B (width) are 100x100. When t1 (web thickness) and t2 (wing thickness) are not specified, the theoretical weight is 17.2kg/m and the cross-section area is 21.9mm2. - HW125x125: H and B are 125x125, theoretical weight 23.8kg/m, cross-section area 30.31mm2. - HW150x150: H and B are 150x150, theoretical weight 31.9kg/m, cross-section area 40.55mm2. - HW175x175: H and B are 175x175, theoretical weight 40.3kg/m, cross-section area 51.43mm2. - HW200x200: H and B are 200x200, theoretical weight 50.5kg/m, cross-section area 64.28mm2. - European/British/German standards: HEA100 - HEA1000，HEB100 - HEB1000，HP200*53.5 - HP400*231，HD260*68 - HD400*231，UB127*76 - UB1016*305，UC127*76 - UC356*368，UBP203*203 - UBP356*368，HL920*344 - HL1100， The implementation standards are EN10025 - 2, EN10025 - 4, EN10025 - 5, and the materials are S235JR/J0, S275JR/J0/J2, S355JR/J2/K2/M/TL/TL/J0XP/J2XP/J0W/J2W, S450J0, S460M, etc. The basic formula for calculating its theoretical weight was: W(weight, kg) = F(cross-section area mm2)×L(length, m)× rho (density, 7.85g/cm)×1/1000. Different types of H-shaped steel (such as HH, HH, HN, etc.) have different sizes and applications. For example, the height and width of HH steel are basically the same, mainly used for steel core columns in reinforced concrete frame structures; the ratio of the height and width of HH steel is roughly 1.33 - 1.75, mainly used for steel frame columns in steel structures; the ratio of the height and width of HN steel is greater than or equal to 2, mainly used for beams. The novel "Watching the Moon on Fish Island" is equally exciting. Everyone is welcome to click and read it!