H-type steel model comparison table
The following are some of the H-beam models: 1. According to domestic classification: - HN: The ratio of the height of H-shaped steel to the width of the wing is greater than or equal to 2. It is mainly used for beams. The use of I-shaped steel is equivalent to HN steel. In terms of construction and civil engineering applications, it is suitable for bending components such as steel beams. - Hm: The ratio of the height of H-shaped steel to the width of the wing is roughly 1.33 - 1.75. It is mainly used in steel structures as steel frame columns. It is used as a frame beam in frame structures that bear dynamic loads, such as equipment platforms. - HH: The height of H-shaped steel was basically the same as the width of the wing. It was mainly used for steel-core columns (also known as rigid steel columns) in reinforced concrete frame structures. It was mainly used for columns in steel structures. 2. European standard H-shaped steel model and weight per meter (Laigang/imported from Europe): - The weight of a 100-meter HFA was 16.7 kg, and the weight of a 100-meter HEB was 20.4 kg. - 120 meters for HFA weighed 19.9 kg, 120 meters for HEB weighed 26.7 kg; - The weight of the 140-meter HFA was 24.7KG, and the weight of the 140-meter HEB was 33.7KG. - The weight of the 160-meter HFA was 30.4 kg, and the weight of the 180-meter HEB was 51.2 kg. - The weight of the 180-meter HFA was 35.5 kg, and the weight of the 180-meter HEB was 51.2 kg. - The weight of the 200-meter HFA was 42.3KG, and the weight of the 200-meter HEB was 61.3KG. - The weight of the 220-meter HFA was 50.5 kg, and the weight of the 220-meter HEB was 71.5 kg. - The weight of the 240-meter HEA was 60.3 kg, and the 240-meter HEB was 83.2 kg. - The weight of the 260-meter HEA was 68.2 kg, and the 260-meter HEB was 93KG. - The weight of the 280m HFA was 76.4KG, and the 280m HEB was 103kg. - The weight of the 300-meter HFA is 88.3 kg, and the weight of the 300-meter HEB is 117KG. - The weight of a 400-meter HFA is 125KG, and the weight of a 400-meter HEB is 155KG. - The weight of a 500-meter HFA is 155KG, and the weight of a 500-meter HEB is 187KG. - The 600-meter weight of the HEA was 178KG, while the 600-meter weight of the HEB was 212KG. The representation of H-shaped steel included the height, width, thickness of the web and wing plates. For example, the 150*150 model could be expressed as 150*150*7*10, and the 250*175 model could be expressed as 244*175*7*14. Different types of H-shaped steel have different uses in different building structural components. Its size composition series is reasonable and the model is complete, which is easy to design and choose. The novel "Watching the Moon on Fish Island" is equally exciting. Everyone is welcome to click and read it!
H-type steel theoretical weight comparison table
The following is the theoretical weight data of some H-beam steel: |specification| Theoretic weight (kg)| |----|----| |H W 100*100*6*8|17.2| |H W 125*125*6.5*9|23.8| |H W 150*150*7*10|31.9| |H W 175*175*7.5*11|40.3| |H W 200*200*8*12|50.5| |H W 200*204*12*12|56.7| |H W 250*250*9*14|72.4| |H W 250*255*14*14|82.2| |H W 294*302*12*12|85| At the same time, the theoretical weight of the H-shaped steel was calculated as: weight (kg)=(web height h* web thickness t1 + wing width b* wing thickness t2*2)*0.00785. In addition, you can search for "Risheng Steel" on its official website to obtain the "H-shaped steel theoretical weight table" of the standard of the national standard. In addition to the theoretical weight of 17 standards, there are 98 standard theoretical weight values and various important parameters. The novel "Watching the Moon on Fish Island" is equally exciting. Everyone is welcome to click and read it!
HW500 steel weight comparison table
The following are some of the HW500 steel weight data: - HW500 *350, weight per meter 146 Kg; - HW500 * 350A, weight per meter 179kg; - HW500 *400, weight per meter 162kg; - HW500 * 400A, weight 199kg per meter. The novel " Watching the Moon on Fish Island " is equally exciting. Everyone is welcome to click and read it!
American standard h steel specifications comparison table
The American standard H-shaped steel specifications were mainly based on its cross-section height, width, web thickness, and wing thickness. The model number usually begins with the letter "W", followed by a number indicating the height of the cross-section and another number indicating the width of the cross-section (these two numbers are usually in inches). Common specifications ranged from 12 inches (305mm) to 48 inches (1219mm) in height, 6 inches (152mm) to 18 inches (457mm) in width, 0.6 inches (15.24mm) to 3 inches (76.2mm) in web thickness, and 0.9 inches (22.86mm) to 3.6 inches (91.44mm) in edge thickness. The specifications of the American standard H-shaped steel were W4 *13 -W40 *392, etc. At the same time, the size of the American standard H-shaped steel may also be expressed in the form of "height x width x web thickness x wing thickness". For example, HW10x100 specifications of H-shaped steel have a waist height of 100mm, a leg width of 100mm, a web thickness of 6.5mm, and a wing thickness of 13mm. HW12x125, HW14x140, and HW16x160 specifications also have specific dimensional parameters. The material is generally carbon structural steel of ASTM A36 or ASTM A572 Grade 50. The size and specifications of the American Standard H-beam may vary depending on the specific product, manufacturer or market demand. In practical applications, it is recommended to refer to relevant standards, product manuals or consult professional engineers for the most accurate information. The novel "Watching the Moon on Fish Island" is equally exciting. Everyone is welcome to click and read it!
H-type steel theoretical weight table 2017
The following is the theoretical weight table of some H-shaped steel (2017 standard): |specification| Unit weight (kg/m)| Cross Section Area (mm2)| |----|----|----| |H W 100*100*6*8|17.2|21.9| |125*125*6.5*9|23.8|30.31| |150*150*7*10|31.9|40.55| |175*175*7.5*11|40.3|51.43| |200*200*8*12|50.5|64.28| The novel "Watching the Moon on Fish Island" is equally exciting. Everyone is welcome to click and read it!
Table of theoretical weight and specifications of h-type steel
The following is the theoretical weight table and specifications of some H-shaped steel: - Part of the domestic specifications: - HW100x100: H (height) and B (width) are 100x100. When t1 (web thickness) and t2 (wing thickness) are not specified, the theoretical weight is 17.2kg/m and the cross-section area is 21.9mm2. - HW125x125: H and B are 125x125, theoretical weight 23.8kg/m, cross-section area 30.31mm2. - HW150x150: H and B are 150x150, theoretical weight 31.9kg/m, cross-section area 40.55mm2. - HW175x175: H and B are 175x175, theoretical weight 40.3kg/m, cross-section area 51.43mm2. - HW200x200: H and B are 200x200, theoretical weight 50.5kg/m, cross-section area 64.28mm2. - European/British/German standards: HEA100 - HEA1000，HEB100 - HEB1000，HP200*53.5 - HP400*231，HD260*68 - HD400*231，UB127*76 - UB1016*305，UC127*76 - UC356*368，UBP203*203 - UBP356*368，HL920*344 - HL1100， The implementation standards are EN10025 - 2, EN10025 - 4, EN10025 - 5, and the materials are S235JR/J0, S275JR/J0/J2, S355JR/J2/K2/M/TL/TL/J0XP/J2XP/J0W/J2W, S450J0, S460M, etc. The basic formula for calculating its theoretical weight was: W(weight, kg) = F(cross-section area mm2)×L(length, m)× rho (density, 7.85g/cm)×1/1000. Different types of H-shaped steel (such as HH, HH, HN, etc.) have different sizes and applications. For example, the height and width of HH steel are basically the same, mainly used for steel core columns in reinforced concrete frame structures; the ratio of the height and width of HH steel is roughly 1.33 - 1.75, mainly used for steel frame columns in steel structures; the ratio of the height and width of HN steel is greater than or equal to 2, mainly used for beams. The novel "Watching the Moon on Fish Island" is equally exciting. Everyone is welcome to click and read it!
Model configuration comparison
The comparison of the parameters of the car models included many aspects. In terms of appearance, for example, the S9 had the simple style of a new energy model. The front face was simple, the lines of the cabin cover showed muscle, the front and bottom were penetrated, and the LED light source of the high and low beam lights was rich in lighting configuration. The BMW 5 series was a classic family sports style, with multiple parts such as the kidney air intake grill decorated with chrome-plated strips, and the double L-shaped daytime running lights had complete lighting functions. In terms of body size, the S9 was 5160x1987x1486mm in length, width and height, with a wheelbase of 3050mm, while the BMW 5 series was 5175x1900x1520mm with a wheelbase of 3105mm. In terms of interior configuration, the advantage of the S9 lies in its smart configuration, such as the Hongmeng cockpit and Huawei ADC 3.0. Its interior is simple, the steering wheel is made of leather and supports heating function, the central control 15.6-inch touch LCD central control screen, the 12.3-inch full LCD dashboard displays clearly under strong light, supports car networking and OTA upgrades; The BMW 5 Series uses electronic knob gear shifting and dual screens, 12.3-inch all-LCD meters and 14.9-inch central control screens, but the car system is not rich in functions. It is only equipped with the Snapdragon 8155P chip and supports Apple CarPlay. Other functions such as 360° panoramic image, full-speed self-adapting cruise, automatic lane change assistance, etc. need additional options. L2 driving assistance functions are limited. In addition, in terms of some performance-related parameters, such as the air intake form of some models being a turbine, the maximum horsepower, the maximum moment and other values, as well as the motor related parameters (if it was a new energy model), battery charging time (new energy model), transmission type, body type, etc. were all important contents for comparison. Different models also had differences in the chassis. For example, some models had a front double wishbone and a rear five-link, and were equipped with ADC and air suspension, which could realize the magic carpet function. This function was only available in some high-end models in the past. At the same time, the maximum torque-speed range affected the daily driving dynamic response speed, and the maximum speed of the vehicle could also reflect the overall hardware level of the vehicle. These were also factors that needed to be considered when comparing the vehicle parameters. The novel "Good Chang 'an" is equally exciting. Everyone is welcome to click and read it!
height comparison table
The Child's height comparison table is a standard table used to refer to the development of children's height. The average height and weight of children varied according to age and gender. For example, according to the height comparison table in 2022, the standard height of a one-year-old boy was 76.5 cm, and the standard height of a two-year-old boy was 88.5 cm. In addition, children's height development was affected by many factors such as genetics, nutrition, environment, and living habits. A child's height and weight would increase rapidly in the first few years after birth, and then the growth rate would gradually slow down until puberty. Therefore, knowing the child's height comparison table could help parents and guardians better understand the growth of children. While waiting for the anime, you can also click on the link below to read the classic original work of The King's Avatar!
Year 2025 comparison table
China size comparison table
The China Sizing Chart was a tool used to compare the sizes of Chinese clothing with those of other countries. We can find some relevant information. The documents [1] and [2] provide a comparison table of men's and women's sizes, including international, European, American, Korean, and China sizes. The document [3] provided some common size standards, such as XS, S, M, L, and QL, as well as the corresponding height range. The document [4] provided a cross-reference table of women's sizes, including international, American, Korean, and China sizes. The document [6] provided a comparison table between the British and China sizes. The document [8] provides a comparison table of top sizes suitable for individuals 180cm tall. In summary, we can find some information about the China size comparison table, but we can't find a complete and comprehensive China size comparison table. Therefore, I don't know if there is a complete China size comparison table.
China size comparison table
The China Sizing Chart was a form used to compare China's sizes with those of other countries. We can see multiple documents about China's size comparison table, including comparisons with the US, Japan, UK, Italy, and Germany. These tables provided the conversion relationship between sizes in different countries to help people choose the right size when buying clothes, shoes, etc. However, the specific content of the cross-reference table was not provided in the given search results, so a detailed cross-reference table could not be provided.