Self-made cute little handmade
Here are some ways to make cute handmade items: * * 1. Small box creation ** 1. * * Materials **: 304 stainless steel 0.03 cm thin steel plate, ruler, scissors for cutting iron sheets, hand pliers, straight-edged anvil, hammer, and vice. 2. * * Steps ** - He cut out four 5-centimeter wide strips, two of which were 20 centimeters long and two of which were 23 centimeters long. - First, he folded two 20-centimeter long boxes into 5-centimeter square boxes. The opening was placed in the middle of one side of the square box. One of them was slightly larger than the other by 0.1 or 0.2 centimeters. Then, he put them together. The two sides of the opening were symmetrical, forming a small square box. - He placed the square in the middle of a 23-centimeter long strip, bent it close to both sides of the square, and folded it into the square. The folded square was about 4 centimeters long. - Using the same method, he folded another 23-centimeter strip and the small box was ready. If the thin steel sheet was elastic, there would be a slight bulge in the fit, and the gap could be filled with porcelain paste. - Another method was to cut the thin steel sheet into a "cross" shape, with a 5x5 cm square in the middle and a 5x8 cm square on each side. Then, cut two 5x20 cm strips, fold them into two 5x5 boxes, and finally assemble them together. * * 2. Paper Flower Making ** 1. * * Simple Rose ** - [Materials: Square colored paper, toothpicks, or sticks.] - * * Steps ** - He folded the square colored paper diagonally and then folded it to form a triangle. - He folded one side of the triangle outward to form a square shape, then used his fingers to gently pull up the middle corner to form a petal shape. - Gently flatten the petals with a toothpick or a thin stick from the bottom to the outside, so that the petals show a natural bending effect. - Repeat the above steps to make multiple petals and glue them together with double-sided tape or glue to form a complete rose. 2. * * Tulips ** - [Material: Red or other colored square paper] - * * Steps ** - He folded the square colored paper in half, unfolded it, and then folded it diagonally to form a triangle. - He folded the two sides of the triangle upward to form the shape of a tulip petal. - The small triangle at the bottom was folded inward to form the flower holder of the tulip. - He could make some subtle adjustments to the petals to make them more natural and realistic. 3. * * Silk ribbon flower ** - [Materials: Silk ribbon, thin iron wire, green tape] - * * Steps ** - Fold the ribbon in half along the center line to form a long strip. - From one end, he folded the ribbon repeatedly into a "Zi" shape. - One end of the folded ribbon was fixed with a thin iron wire, and the ribbon was rotated around the iron wire to form the shape of a petal. - Tie the wire and ribbon together with green tape to mimic the stem of a flower. - Leaves or other decorations could be added to the stem as needed. 4. * * Five petals cherry blossom ** - [Material: Square colored paper] - * * Steps ** - Fold the square colored paper diagonally, and then fold the two sides to form an intersection. - He folded one side of the paper at the intersection point and did the same on the other side. - He held the paper in the center and gently rotated it to make the petals unfold naturally. - You can use scissors to cut the edges of the petals into jagged or wavy shapes to increase the realism of the cherry blossoms. * * 3. Trash Transformation Handcraft ** 1. * * Milk tea bag modified paper box ** - step - Choose a nice milk tea bag (like the one from Honey Snow Ice City), cut off the handles on both sides, cut off the part below the red line at the bottom, and cut off the excess part above half of the snowman's head. - Fold it inward along the purple dotted line. After folding it, fix the bottom with double-sided tape. The seal should also be glued well. - He made two holes in the appropriate positions on both sides, then tied a bow with the red handle of the milk tea bag. The paper box was ready. 2. * * Unworn jeans, modified shoulder bag ** - step - He cut off a pair of trousers and cut a square hole in the lining. - He sewed the edges together and turned them over after dividing them. The small squares that he had just cut out could be sewed to make a strap buckle. - After putting on the straps, the shoulder bag was ready. 3. * * Milk carton transformed into a bookstand ** - step - If you have an unwanted milk carton at home, cut it as shown in the picture (note that the distance between the two sides is equal). - After cutting, there were two bookends. If they looked ugly, he could cut out the kraft paper bag he usually bought and paste it on the outside for simple decoration. 4. * * Milk powder can transformed into a small stool ** - step - He washed the milk powder cans that were left behind when the child drank milk powder when he was young. - He used hot melt glue to fix the milk powder cans together and wrapped them in cardboard. - It could be decorated with cloth strips, hemp ropes, and wool that were glued with hot melt glue. 5. * * Eliminate chopsticks and transform them into tea trays ** - step - He arranged the discarded chopsticks at home and tied them side by side with ropes of the same color. - He found a few chopsticks and cut them off from the middle to serve as the base of the bottom. He placed them on both ends of the insert plate and the tea plate was ready. 6. * * Crawling mat transformed into a small sofa ** - step - He cut the unused climbing mats according to the shape of the gauze. - He pasted them together with hot melt glue, then found a few pieces of unused fabric and cut them to make the outer cover of the sofa. 7. * * Waste paper shells transformed into scratching boards ** - step - He cut all the express delivery boxes at home to the same size. - It was fixed in the carton with hot melt glue. 8. * * Paper roll core modified storage box ** - step - He collected the remaining paper cores and glued them together with hot melt glue to make a hexagonal shape. - The outermost layer was wrapped in a paper shell, and a bottom was added. It could be used as a data cable storage box or a box for children's toys. A harder cover could also be used as a small stool.
Self-made little ring
Here are a few ways to make a small ring: ** 1. Use a plaster mold to make a ring ** 1. ** Tool preparation ** - Fire Gun (I recommend the traditional leather tiger fire gun, which consists of an oil can, a gun, and a wind ball). - Plaster mold (can be purchased online, there are many patterns to choose from, the principle is lost wax casting). - Pressing tool (can be used to fill a small bowl with toilet paper and add water to compress it. It can also be used to compress oil sludge or red soil mixed with water in the field). - A bowl of water, a copper brush, and an agate knife. 2. ** Production process ** - Warm up the plaster mold. - The prepared metal (such as silver or copper, when using copper, you need to add tribution during the melting process to ensure a smooth surface) was placed on the fully heated plaster mold, and the metal was turned into liquid with a gun. - After the metal was fully liquefied and confirmed to be correct, he used the prepared pressing tool to press the liquid metal into the mold. - He took out the ring that had already been formed in the mold. - He used a copper brush to clean the lime on the surface of the ring. - Use a file to flatten the excess parts at the water outlet. - The agate knife was dipped in water mixed with dishwashing liquid and scraped back and forth on the surface of the ring to polish it. ** 2. Use metal wire to make a ring ** 1. ** Tool preparation ** - Round head pliers, flat head pliers, hammer, ring mandril, metal wire, fine thread (if you want to add small gemstones for decoration), small gemstones (option). 2. ** Production process ** - He folded the metal wire in the middle and bent it into a U-shape with round-headed pliers. - He pressed the U-shape flat with flat pliers. - Winding the folded metal wire around the ring core, he tapped the metal wire with a hammer to form a round ring (starting from the fold line, then continue to tap along the ring until it meets the fold, but don't tap the two ends of the metal wire first). - Use round-headed pliers to bend the metal wire at the two ends. - He put the ring back into the core rod and then used the hammer to knock it gently to fix the shape of the ring (including the part that had just been designed). - If necessary, a small gem could be wrapped around the finished ring with a thin thread as an additional decoration. ** 3. Simple DIY-made silver ring (e.g. in a DIY-shop or by yourself)** 1. ** Choose a style **: For example, choose a simple plain circle. 2. ** Production process ** - The silver bars were knocked and polished. - If you want to add words, you can type them. - After spraying it with a musket, it was placed in water to cool it down. - Then, he would carry out further processing, such as hammering, knocking, polishing, and other operations until the ring was ready. "Rose Fragrance Shadow: The Story of Sweetheart's Growth" was equally exciting. Everyone was welcome to click and read it!
Handmade Cute Cat
Here are some ways to make cute cats by hand: 1. ** Three-dimensional cat (suitable for children, difficulty: 1 star)** - Materials: Square paper, colored pens, or sticker. - Steps: First, take out the square paper and fold it along the middle, then fold it along the diagonal of the rectangular shape, then cut off the folded part and open it into a triangle; Fold the bottom two corners to the middle, then fold it outwards, the upper corner folds downwards, and the bottommost corner folds upwards; Turn it over to the back and then turn it back, folding the small corners inwards on both sides to decorate the face shape; Finally, draw or paste the eyes, nose, and mouth on the front. 2. ** Walking Cat Claw (small toy)** - [Materials: Paper, refill (used), tape, wooden stick (toothpick or bamboo stick)] - Steps: First, draw a cat's paw on the paper and color it. Then, cut the origami paper to get two cat's paws. Cut the pen core into two sections and stick it to the middle of the back of the cat's paw. Stick wooden sticks on both sides of the tape and put the cat's paw on it. 3. ** Aluminium-tinkle cat ** - [Materials: Blue aluminum wire, round nose pliers, pliers] - Steps: Prepare about 70cm of aluminum wire, and make the eyes, internal head shape, body, feet, hands, external head outline, mouth, beard and other parts according to specific steps. 4. ** Self-made cat cage (can be used as cat activity space)** - Materials: 2/2cm square tube, wire mesh, swallowtail self-tapping, all-ceramic wall brick, diatom mud mat, universal wheel, etc. - Steps: The main frame was made of 2/2cm square pipe, and the iron wire mesh was fixed with swallowtail self-tapping. The bottom and platform were made of all-ceramic wall bricks. The small platform and small stairs were sewn between the two layers. The diatom mud mat was cut to a certain size. Finally, it was sprayed with dull black paint and installed with universal wheels. Two doors were opened for shoveling cat litter and feeding and adding water. 5. ** Cute kitten tape measure ** - Materials: Paper, cardboard, cylinder, etc. - Steps: First draw the kitten and color it, with two copies and holes on the back; Prepare two pieces of paper to roll up, cut one end into an umbrella shape; Draw a ruler and roll it up against the big cylinder, then press it flat on the back; Prepare the cardboard, paint the color, cut out the sawtooth and stick it well; Leave a small hole to stick the small cylinder in the middle, stick the two pieces together to install the small handle, and finally stick the limit sticker.
A handmade ring made of plasticine
The following is a method to hand-make a ring with plasticine: First, prepare the plasticine. You can choose different colors to increase the richness. After kneading the plasticine until it was soft, he took out a small piece and began to make the basic shape of the ring. The shape could be round, oval, or square according to personal preference. Then, you can add decorations to the ring, such as kneading the plasticine of another color into a thin sheet, then cut it into the desired shape with a knife or toothpick and paste it on the ring. You can also add flowers, stars, hearts, and other shapes. Beads or glitter could also be pasted on the ring and arranged according to personal preference to increase the ring's brightness. The size of the ring had to be taken into consideration during the process of making it. It could be adjusted according to the size of one's finger. One could try it on first and continue making it after it was suitable. After the production was completed, he needed to wait for the plasticine to completely dry. This process might take a few hours or a day. He could put the ring in a ventilation area to speed up the drying process. After drying, the ring was completed. " Rose Fragrance Shadow: The Story of Sweetheart's Growth " was equally exciting. Everyone was welcome to click and read it!
The kindergarten made a handmade camera
If he wanted to make a handmade camera in the kindergarten, he could use discarded paper boxes, beverage bottles, tape, and other materials to make it. First of all, the main body and lens of the camera were made of paper boxes and disposable paper cups. The small paper box was glued to the back as a display screen and painted as a whole. Then, he used a computer to print out the instructions or patterns on the colored cardboard, used the cap of the beverage bottle to make the side knob, used clay or soft pottery to make a disc-shaped tape and fixed it on it, and then used the remaining materials to make other details. This way, he could make a fun handmade camera toy. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Self-made cute blind box Pikachu tutorial
The following is a tutorial on a self-made Pikachu Blind Box: 1. ** Prepare materials and tools **: You need to prepare a blind box, a Pikachu toy model, colored paper, glue, scissors, etc. 2. ** Dealing with the inside of the blind box **: Open the blind box, take out the cardboard inside, wrap it with colored paper, and then put it back into the blind box. 3. ** Place Pikachu Model **: Place the Pikachu toy model into the box. 4. ** Creating Blind Box Exterior Decorations ** - Use colored paper to create a Pikachu avatar, then cut it out and paste it on the outside of the blind box so that the player can know the contents of the blind box. - On the other side of the blind box, he made a small card with colored paper, wrote "Pikachu Blind Box" and other information, and then pasted it on the blind box for identification. 5. ** Blind Box Creation Completed **: Fasten the blind box tightly, and a Pikachu blind box will be completed. It could also be made in other ways, such as: 1. ** Image design **: First, design the Blind Box series. After determining the image of the Pikachu doll, you can refer to the official design or your own creativity. 2. ** Make a packaging box (option)**: If you don't use ready-made blind boxes, you can fold the packaging box yourself, draw the packaging on the surface of the box, and add decorations. 3. ** Creating Pikachu (option)** - He took out the yellow colored clay and kneaded it into a circle. Then, he took out the yellow colored clay and kneaded it into two small strips and connected them. - He took out the black colored clay, kneaded it into two circles, pressed it flat, and stuck it on his ears. Then, he took out the black colored clay, kneaded it into two small circles, and stuck it on the circle (head). - He took out some red colored clay and kneaded it into a round shape. He pressed it flat and stuck it on both sides of the round shape (head) to make a face. - He took out the black colored clay and kneaded it into the shape of a 3. He stuck it upside down on the round (head) and made a cute Pikachu. Finally, he placed the finished Pikachu into the blind box and added a label and instructions. You can also try to use different materials and tools to make Pikachu blind boxes. For example, you can use clay, paper, cloth, etc. to make Pikachu and blind boxes. You can design different styles of Pikachu blind boxes according to your own preferences and creativity to increase the fun and collection value. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
The system of Douluo's Self is a little cute
In the novel "Douluo: My System Is A Little Cute," the main character had an unconvinced system. This system would come into play when it detected that the protagonist was envious of others (like envious of Tang San having twin spirits), such as helping the protagonist awaken the Three Birth Spirit, when the protagonist was envious of Tang San about to obtain the external spirit bone Eight Spider Lances, the system would gift the protagonist the external spirit bone Dragon Phoenix Ancient Wings, when the protagonist was abused by Zhao Wuji, the system would gift the Spirit Douluo experience card. The entire story revolved around the protagonist's continuous elevation of his abilities on the Douluo Continent with the help of this special system.
Handmade Little Fox Mask
There were many ways to make a handmade Little Fox Mask. The following was a common method: Materials: Orange, white, and black cardboard, scissors, glue, colored pencil or pen. Steps: 1. According to the size of the face, measure and cut out a piece of cardboard or cardboard of a suitable size to form the shape of the mask, leaving the eyes and nose. 2. Cut out two fox ears from orange cardboard and stick them on both sides of the mask. 3. Cut out two round eyes with white cardboard and paste them in the right places. 4. Cut out two small round pupils with black cardboard and paste them on the white eyes. 5. Cut out a small triangular nose from black cardboard and stick it in place. 6. Use a colored pencil or pen to draw the characteristics of the little fox on the mask, such as the stripes on the forehead and the small dots on the cheeks. 7. Make sure the glue and colored pens are dry. Another method was as follows: 1. [Prepare blueprints and materials: Print and prepare the blueprint of the fox mask. Choose cardboard or kraft paper as the base of the mask.] 2. Paste the drawing: Stick the drawing on the selected paper to ensure that it is flat and free of bubbles. 3. [Cutting parts: Use scissors or a carving knife to cut out the various parts of the mask along the outline of the drawing. Pay attention to the details of the cutting to ensure that the edges are neat.] 4. Fold and paste: Fold and paste the parts according to the instructions on the drawing. Use double-sided tape or glue to fix them to ensure that they are firmly pasted. 5. Decorative Mask: If necessary, use colored cardboard, paint, and paintbrushes to decorate the mask, adding details such as eyes, nose, and mouth to make it more vivid. 6. Make a strap: Make a strap on either side or the top of the mask. You can use colorful or elastic ropes to make sure the strap is long enough to fit on your head easily. 7. [Inspection: Check whether the various parts of the mask are firm and make sure that there are no loose or falling parts.] "Little Fox Fairy" is equally exciting. Everyone is welcome to click and read it!
Handmade lanterns made from old bottles
Here are a few ways to make lanterns from old bottles: ** 1. Lantern balloons (using old beverage bottles)** 1. [Materials: Waste beverage bottles, red balloons, hanging tassels or red ropes, scissors, glue.] 2. Steps: - Cut the empty beverage bottle into vertical strips with scissors. - He opened the bottle cap, put in a red balloon, blew it up, and then tied it with a red string. - He made a hole in the bottle cap, put the red string of the balloon through the hole, and then closed the bottle cap. - He stuck the red tassel to the bottom of the drink bottle and the lantern was ready. ** 2. Fish lamp (using plastic bottles)** 1. Materials: 2 plastic bottles, plastic tubes, scissors, sharp-nosed pliers, ruler, rice paper, white rubber, hot melt glue, watercolor paint, watercolor brush, lamp string, iron wire, etc. 2. Steps: - He used scissors to split the plastic bottle into a head, a tail, and two halves of the body in the middle. - He used a ruler to measure the width of each segment of the body, then cut out two heads and two tails. - The head and tail were fixed to the plastic bottle fish with hot melt glue. - He mixed the white gel and water in a ratio of 1:1, pasted it on the rice paper, and dried it. - A small hole was made at the joint of both ends of each section, and it was connected and fixed with iron wire. - He used scissors to make a hole in the middle of the plastic bottle under the fish belly and fixed it with hot melt glue. - He drew the head and body of the fish. - Finally, he put the string of lights into the fish's mouth. ** 3. Yogurt Bottle, Mid-Autumn Lantern ** 1. [Materials: 5 yogurt bottles, materials for making lace (can be chosen according to preference), etc.] 2. Steps: - Prepare five identical yogurt bottles. He made two laces, stacked them up and cut them together. The pattern at the bottom would be used as a pendant under the lantern. - He laid the five bottles flat and glued the bottom. - He made a hole in the middle of the lace and placed a sling. After making a little decoration, he applied glue and stuck it to the top.
A girl's self-made exquisite little ring
There were many ways for a girl to make a delicate little ring: - [Using leftover materials to make: If there are small materials left over from cutting the bracelet, you can make it into a new and unique safety buckle ring.] - ** Paper Ring **: Like making a crayon Shinchan ring with a heat-shrink sheet. First, draw a rectangular shape as the ring part and decorate it. After cutting it out, use a hot air gun to blow it to make it smaller, and then make it into a ring shape. - ** Iron wire and lipstick production **: Prepare fine iron wire (such as silver and red, 1 roll each) and 1 lipstick. Take about 20cm long silver and red iron wire, twist it slightly, put the lipstick in the middle of the iron wire, wrap the lipstick twice around the two ends of the iron wire, tie a knot in the middle, take it off to test the size, then put it back on the lipstick and spin it to form a flower shape. Cut off the excess iron wire and wrap both ends around the ring. You can also make a smaller silver ring. - ** plastic production **: For example, self-made plastic rings can be made into rings with various patterns and styles. For example, the self-made plastic rings of Duoduo are full of creativity. - ** Making in a small DIY-shop **: You can choose a small DIY-shop, measure the size, check the silver bars, choose the pattern to be printed on the ring (if it is a narrow ring, you may only choose simple patterns such as numbers and English), and then make it according to your own ideas. - [Lost Wax Casting Method (requires more tools): Prepare a musket (such as a leather tiger), a plaster mold, a molding tool (such as a small bowl stuffed with toilet paper and pressed with water, or you can also use oil sludge or red soil mixed with water to make it firm), a bowl of water, a copper brush, and an agate knife.] After warming up the plaster mold, he placed the metal (such as silver or copper, which needed to be melted by adding tribution) on the mold and turned it into liquid with a gun. Then, he used the prepared tools to press the metal liquid into the mold. After taking out the ring, he used a copper brush to clean the lime on the surface, and used a file to flatten the excess at the mouth of the ring. Finally, he used an agate knife to rub the surface of the ring back and forth with water mixed with dishwashing liquid. - ** Metal wire winding (like a heart-shaped ring)**: Prepare a 14K bag of gold wire, a wire cutter, a round-nosed jewelry cutter, and a nail polish bottle. Cut off a section of the gold wire and use the pliers to bend it into a heart shape. "Rose Fragrance Shadow: The Story of Sweetheart's Growth" was equally exciting. Everyone was welcome to click and read it!
Teacher's Day handmade gift is cute
Here are some cute handmade gifts for Teacher's Day: 1. ** Heart-shaped handmade gift **: Find a point on the red art paper and start cutting out the heart shape (don't cut it). After cutting the outer circle of the heart shape, cut another heart on top of the heart (don't cut it). Cut the heart shape according to the pattern until it can't be cut anymore. Write a greeting to the teacher in the middle of the blue art paper, then paste the four sides of the cut red art paper on the blue art paper. The heart cut out in the middle can be manipulated at will to form a three-dimensional greeting card. 2. ** Flower of the Cup **: Fold the cardboard in half and cut out the shape of the cup; cut out the hollow shape of the flower with white paper and stick it on the outside of the cup; cut and paste all kinds of flowers in the cup and tie them with small bows; stick a piece of white cardboard on the other side to write blessings or paste photos. 3. ** Gingko Bookmark **: First trim the ginkgo leaves (if the branches are too long, cut them short. If the leaves are dirty, wash them clean and dry them). When the leaves are dry, write the blessing words with a pen (write as lightly as possible to avoid piercing the leaves). After you are done, clip the ginkgo leaves into a book and wait for it to become flat for about 2 - 3 days. 4. ** Handmade bouquet **: You can make a bouquet with some simple materials (such as colored paper, etc.). The colors are bright and the flowers are cute. 5. ** Hand-drawn card **: Draw some cute patterns on colored cardboard, such as small animals and flowers, and then write down words of thanks to the teacher. 6. ** Handmade Bookmarks **: In addition to the ginkgo bookmark, you can also use colored cardboard to cut out various cute shapes, such as the shape of small animals, and then decorate them with patterns drawn by colored pens or stick small sticker. The original work was equally exciting. You could click on the original work of "The Story of Rose" to understand the plot in advance!