Self-made little ring
Here are a few ways to make a small ring: ** 1. Use a plaster mold to make a ring ** 1. ** Tool preparation ** - Fire Gun (I recommend the traditional leather tiger fire gun, which consists of an oil can, a gun, and a wind ball). - Plaster mold (can be purchased online, there are many patterns to choose from, the principle is lost wax casting). - Pressing tool (can be used to fill a small bowl with toilet paper and add water to compress it. It can also be used to compress oil sludge or red soil mixed with water in the field). - A bowl of water, a copper brush, and an agate knife. 2. ** Production process ** - Warm up the plaster mold. - The prepared metal (such as silver or copper, when using copper, you need to add tribution during the melting process to ensure a smooth surface) was placed on the fully heated plaster mold, and the metal was turned into liquid with a gun. - After the metal was fully liquefied and confirmed to be correct, he used the prepared pressing tool to press the liquid metal into the mold. - He took out the ring that had already been formed in the mold. - He used a copper brush to clean the lime on the surface of the ring. - Use a file to flatten the excess parts at the water outlet. - The agate knife was dipped in water mixed with dishwashing liquid and scraped back and forth on the surface of the ring to polish it. ** 2. Use metal wire to make a ring ** 1. ** Tool preparation ** - Round head pliers, flat head pliers, hammer, ring mandril, metal wire, fine thread (if you want to add small gemstones for decoration), small gemstones (option). 2. ** Production process ** - He folded the metal wire in the middle and bent it into a U-shape with round-headed pliers. - He pressed the U-shape flat with flat pliers. - Winding the folded metal wire around the ring core, he tapped the metal wire with a hammer to form a round ring (starting from the fold line, then continue to tap along the ring until it meets the fold, but don't tap the two ends of the metal wire first). - Use round-headed pliers to bend the metal wire at the two ends. - He put the ring back into the core rod and then used the hammer to knock it gently to fix the shape of the ring (including the part that had just been designed). - If necessary, a small gem could be wrapped around the finished ring with a thin thread as an additional decoration. ** 3. Simple DIY-made silver ring (e.g. in a DIY-shop or by yourself)** 1. ** Choose a style **: For example, choose a simple plain circle. 2. ** Production process ** - The silver bars were knocked and polished. - If you want to add words, you can type them. - After spraying it with a musket, it was placed in water to cool it down. - Then, he would carry out further processing, such as hammering, knocking, polishing, and other operations until the ring was ready. "Rose Fragrance Shadow: The Story of Sweetheart's Growth" was equally exciting. Everyone was welcome to click and read it!
A girl's self-made exquisite little ring
There were many ways for a girl to make a delicate little ring: - [Using leftover materials to make: If there are small materials left over from cutting the bracelet, you can make it into a new and unique safety buckle ring.] - ** Paper Ring **: Like making a crayon Shinchan ring with a heat-shrink sheet. First, draw a rectangular shape as the ring part and decorate it. After cutting it out, use a hot air gun to blow it to make it smaller, and then make it into a ring shape. - ** Iron wire and lipstick production **: Prepare fine iron wire (such as silver and red, 1 roll each) and 1 lipstick. Take about 20cm long silver and red iron wire, twist it slightly, put the lipstick in the middle of the iron wire, wrap the lipstick twice around the two ends of the iron wire, tie a knot in the middle, take it off to test the size, then put it back on the lipstick and spin it to form a flower shape. Cut off the excess iron wire and wrap both ends around the ring. You can also make a smaller silver ring. - ** plastic production **: For example, self-made plastic rings can be made into rings with various patterns and styles. For example, the self-made plastic rings of Duoduo are full of creativity. - ** Making in a small DIY-shop **: You can choose a small DIY-shop, measure the size, check the silver bars, choose the pattern to be printed on the ring (if it is a narrow ring, you may only choose simple patterns such as numbers and English), and then make it according to your own ideas. - [Lost Wax Casting Method (requires more tools): Prepare a musket (such as a leather tiger), a plaster mold, a molding tool (such as a small bowl stuffed with toilet paper and pressed with water, or you can also use oil sludge or red soil mixed with water to make it firm), a bowl of water, a copper brush, and an agate knife.] After warming up the plaster mold, he placed the metal (such as silver or copper, which needed to be melted by adding tribution) on the mold and turned it into liquid with a gun. Then, he used the prepared tools to press the metal liquid into the mold. After taking out the ring, he used a copper brush to clean the lime on the surface, and used a file to flatten the excess at the mouth of the ring. Finally, he used an agate knife to rub the surface of the ring back and forth with water mixed with dishwashing liquid. - ** Metal wire winding (like a heart-shaped ring)**: Prepare a 14K bag of gold wire, a wire cutter, a round-nosed jewelry cutter, and a nail polish bottle. Cut off a section of the gold wire and use the pliers to bend it into a heart shape. "Rose Fragrance Shadow: The Story of Sweetheart's Growth" was equally exciting. Everyone was welcome to click and read it!
High-grade self-made ring
Here are some ways to make a high-level ring: 1. ** Using small materials to make a ring **: If there is a small material with a beautiful color, it can be polished into an egg surface to make a ring. The finished product may have a high-grade feeling. 2. **diy coin ring (using euros as an example)**: Made with solders, clay mold, epoxy, and paint, and then polished with sandpaper and polishing paste. 3. ** Self-made natural stone beaded shell ring **: You can choose copper as the material to make a high-quality elastic ring with a new Chinese style. For example, you can choose a combination of pink natural stone with gold beads, Fu + black agate, oval green stone with shell beads, pink stone + square pearls, etc. 4. ** Making an Ivory Fruit Ring **: For example, you can make a cat-ear-shaped ivory fruit ring. First, use a grinding wheel to polish off the excess parts on the outside. According to the size of the finger, use a certain treasure ring ring or compass to determine the inner ring. Use an electric drill or grinding wheel to polish the excess parts of the inner ring. Then use sandpaper to polish the inner ring. Finally, use a polishing plate to polish it. You can also use creativity to make similar rings with different materials. The ivory fruit ring will have a unique patina effect over time. 5. ** Nail Ring **: A fashionable cyber-style ring that can combine nail art and a ring. There are designs that can be worn and removed. You can choose a basic model with simple lines to outline the shape of the nail. It is suitable for most nail colors. There are also designs that use diamonds, crystals, pearls, and other elements that are more flashy. There are also designs with fashion brand brands. It can be matched with different styles of clothing. It can also be matched with joint rings to make the fingers look more slender and layered. "Rose Fragrance Shadow: The Story of Sweetheart's Growth" was equally exciting. Everyone was welcome to click and read it!
Self-made cute little handmade
Here are some ways to make cute handmade items: * * 1. Small box creation ** 1. * * Materials **: 304 stainless steel 0.03 cm thin steel plate, ruler, scissors for cutting iron sheets, hand pliers, straight-edged anvil, hammer, and vice. 2. * * Steps ** - He cut out four 5-centimeter wide strips, two of which were 20 centimeters long and two of which were 23 centimeters long. - First, he folded two 20-centimeter long boxes into 5-centimeter square boxes. The opening was placed in the middle of one side of the square box. One of them was slightly larger than the other by 0.1 or 0.2 centimeters. Then, he put them together. The two sides of the opening were symmetrical, forming a small square box. - He placed the square in the middle of a 23-centimeter long strip, bent it close to both sides of the square, and folded it into the square. The folded square was about 4 centimeters long. - Using the same method, he folded another 23-centimeter strip and the small box was ready. If the thin steel sheet was elastic, there would be a slight bulge in the fit, and the gap could be filled with porcelain paste. - Another method was to cut the thin steel sheet into a "cross" shape, with a 5x5 cm square in the middle and a 5x8 cm square on each side. Then, cut two 5x20 cm strips, fold them into two 5x5 boxes, and finally assemble them together. * * 2. Paper Flower Making ** 1. * * Simple Rose ** - [Materials: Square colored paper, toothpicks, or sticks.] - * * Steps ** - He folded the square colored paper diagonally and then folded it to form a triangle. - He folded one side of the triangle outward to form a square shape, then used his fingers to gently pull up the middle corner to form a petal shape. - Gently flatten the petals with a toothpick or a thin stick from the bottom to the outside, so that the petals show a natural bending effect. - Repeat the above steps to make multiple petals and glue them together with double-sided tape or glue to form a complete rose. 2. * * Tulips ** - [Material: Red or other colored square paper] - * * Steps ** - He folded the square colored paper in half, unfolded it, and then folded it diagonally to form a triangle. - He folded the two sides of the triangle upward to form the shape of a tulip petal. - The small triangle at the bottom was folded inward to form the flower holder of the tulip. - He could make some subtle adjustments to the petals to make them more natural and realistic. 3. * * Silk ribbon flower ** - [Materials: Silk ribbon, thin iron wire, green tape] - * * Steps ** - Fold the ribbon in half along the center line to form a long strip. - From one end, he folded the ribbon repeatedly into a "Zi" shape. - One end of the folded ribbon was fixed with a thin iron wire, and the ribbon was rotated around the iron wire to form the shape of a petal. - Tie the wire and ribbon together with green tape to mimic the stem of a flower. - Leaves or other decorations could be added to the stem as needed. 4. * * Five petals cherry blossom ** - [Material: Square colored paper] - * * Steps ** - Fold the square colored paper diagonally, and then fold the two sides to form an intersection. - He folded one side of the paper at the intersection point and did the same on the other side. - He held the paper in the center and gently rotated it to make the petals unfold naturally. - You can use scissors to cut the edges of the petals into jagged or wavy shapes to increase the realism of the cherry blossoms. * * 3. Trash Transformation Handcraft ** 1. * * Milk tea bag modified paper box ** - step - Choose a nice milk tea bag (like the one from Honey Snow Ice City), cut off the handles on both sides, cut off the part below the red line at the bottom, and cut off the excess part above half of the snowman's head. - Fold it inward along the purple dotted line. After folding it, fix the bottom with double-sided tape. The seal should also be glued well. - He made two holes in the appropriate positions on both sides, then tied a bow with the red handle of the milk tea bag. The paper box was ready. 2. * * Unworn jeans, modified shoulder bag ** - step - He cut off a pair of trousers and cut a square hole in the lining. - He sewed the edges together and turned them over after dividing them. The small squares that he had just cut out could be sewed to make a strap buckle. - After putting on the straps, the shoulder bag was ready. 3. * * Milk carton transformed into a bookstand ** - step - If you have an unwanted milk carton at home, cut it as shown in the picture (note that the distance between the two sides is equal). - After cutting, there were two bookends. If they looked ugly, he could cut out the kraft paper bag he usually bought and paste it on the outside for simple decoration. 4. * * Milk powder can transformed into a small stool ** - step - He washed the milk powder cans that were left behind when the child drank milk powder when he was young. - He used hot melt glue to fix the milk powder cans together and wrapped them in cardboard. - It could be decorated with cloth strips, hemp ropes, and wool that were glued with hot melt glue. 5. * * Eliminate chopsticks and transform them into tea trays ** - step - He arranged the discarded chopsticks at home and tied them side by side with ropes of the same color. - He found a few chopsticks and cut them off from the middle to serve as the base of the bottom. He placed them on both ends of the insert plate and the tea plate was ready. 6. * * Crawling mat transformed into a small sofa ** - step - He cut the unused climbing mats according to the shape of the gauze. - He pasted them together with hot melt glue, then found a few pieces of unused fabric and cut them to make the outer cover of the sofa. 7. * * Waste paper shells transformed into scratching boards ** - step - He cut all the express delivery boxes at home to the same size. - It was fixed in the carton with hot melt glue. 8. * * Paper roll core modified storage box ** - step - He collected the remaining paper cores and glued them together with hot melt glue to make a hexagonal shape. - The outermost layer was wrapped in a paper shell, and a bottom was added. It could be used as a data cable storage box or a box for children's toys. A harder cover could also be used as a small stool.
A handmade ring made of plasticine
The following is a method to hand-make a ring with plasticine: First, prepare the plasticine. You can choose different colors to increase the richness. After kneading the plasticine until it was soft, he took out a small piece and began to make the basic shape of the ring. The shape could be round, oval, or square according to personal preference. Then, you can add decorations to the ring, such as kneading the plasticine of another color into a thin sheet, then cut it into the desired shape with a knife or toothpick and paste it on the ring. You can also add flowers, stars, hearts, and other shapes. Beads or glitter could also be pasted on the ring and arranged according to personal preference to increase the ring's brightness. The size of the ring had to be taken into consideration during the process of making it. It could be adjusted according to the size of one's finger. One could try it on first and continue making it after it was suitable. After the production was completed, he needed to wait for the plasticine to completely dry. This process might take a few hours or a day. He could put the ring in a ventilation area to speed up the drying process. After drying, the ring was completed. " Rose Fragrance Shadow: The Story of Sweetheart's Growth " was equally exciting. Everyone was welcome to click and read it!
Self-made Punch
He could make a simple punching machine. First, prepare a piece of cardboard, cut it into a rectangular shape and fold it in half. Then, he used an awl to pierce through the folded cardboard and expand the edge to the size of a straw. Next, he cut out a section of the straw. One end was cut into a pointed end, and the other end was cut into four pieces and folded outward. In this way, a simple punching machine was made. This kind of self-made punching machine was cheap and convenient to carry around. It could be used anytime and anywhere.
Self-made Transformers
There were many ways to make the Transformers. One way was to use a 3D printer, such as the Kokoni 3D printer. The operation was relatively simple. After turning on the phone, press and hold the Bluetooth switch to connect to the phone to complete the preparation work before printing. The official app had a detailed classification and summary of the model. You could view and adjust the size, accuracy, and other parameters of the print on your phone. The printer would automatically adjust the speed according to the relevant information. The machine had a built-in camera that could generate real-time monitoring videos and record the printing process. It could also freely express creativity on the basis of existing models, adjust angles and parameters to create a unique model, and manually color and draw details after printing. However, the printing process would generate a certain temperature, so it was necessary to avoid contact with children. They could also be handmade. Ren Zanfa, with his obsession and excellent craftsmanship, used cans to make the Prime figures by hand. He spent three days carefully drawing the drawings, then carefully cutting, piecing and shaping the cans. In the process, he overcame the difficulties of the cans being brittle and difficult to be pieced together and fixed. After nine days and nights of hard work, he completed it. When creating the Prime, he could also refer to the image features in the Transformers series, such as the weapon system, styling features (such as G1 style), movable joints (such as the head, the arm root joints, the fingers can be moved, the chest and waist can be rotated, the thigh root joints, the knee bending, the foot contact, etc.), and special parts (such as energy treasure, etc.) to create a more original work. The novel "Hundred Years of Spaceship" is equally exciting. Everyone is welcome to click and read it!
Self-made globe
Self-made globe can be carried out according to the following steps: First, you need to prepare materials, such as hard game paper, scissors, glue, paintbrush, foam paper, pins, etc. First, he printed out the game paper. There were three size of globe materials in the game paper. He printed and cut them according to his needs. After cutting them, he bent the materials slightly and used glue to glue the serrated shapes according to the order on the game paper to fix and connect the materials. He could also draw the surface of the globe, then color it, and finally assemble the globe. If you need to get a full set of game papers, you can follow the public account of " Kuomaru Happy School " and reply to " globe " in the dialog box.
Self-made stamp
The following are some basic steps for making a self-made seal: ** 1. Material preparation ** 1. ** Paper Selection ** - Traditional paper was made from Xuan paper. Xuan paper was flexible and beautiful, suitable for writing and sealing. If you want to make your own paper, you can choose some handmade rice paper with better quality, such as Lianshi paper, which is as thin as cicada's wings, tough and resistant to mud. It is suitable for sealing and engraving. 2. ** Other Materials ** - [Pigments: Used for dyeing. You can choose China painting paint according to your preferences.] - Engraving tools (if you want to engrave a pattern), such as a carving knife, a wooden board, etc. ** 2. Production process ** 1. ** Paper processing (dyeing, adding materials, etc.)** - Dyeing: If you want the paper to have color, you can soak the rice paper in a diluted dye solution. The soaking time depends on the depth of the color you want, and then take it out to dry. - [Adding materials: You can add some special materials to the paper to increase the texture, such as adding petals, leaves, etc. during the paper-making process (this process is relatively complicated and requires a certain amount of paper-making knowledge and skills).] 2. ** Creating patterns (engraving patterns, sprinkling gold and silver powder, etc.)** - [Engraving Patterns: If you have a certain carving skill, you can carve the desired patterns on the wooden board, such as flowers, mountains, rivers, words, etc.] Then, the pattern was printed onto the paper with ink or paint. - Splash gold and silver powder: When the paper is not completely dry, evenly sprinkle gold and silver powder to increase the magnificence of the paper. 3. ** Post-processing (calendering, etc.)** - Calendering: Placing the paper on a smooth and hard object (such as glass, marble slab, etc.) and repeatedly rubbing the surface of the paper with a smooth tool (such as jade, etc.) to make the paper smoother and smoother. This way, the paper will be more beautiful when written and sealed. "Luo Mingxia Love Letter" is equally exciting. Everyone is welcome to click and read it!
Self-made novel
The following is an example of a self-written novel: " Brotherly Love Is Broken " Narrator: The streets of the bustling city are dark, and the brotherhood is gone today. The past laughter became illusory, and the pain in the heart sighed to whom. Verse: Once, brothers walked side by side and fought together. He thought that friendship could last long and go through thick and thin together until his hair turned white. For the sake of his brother, he gave up his life, money, fame and fortune. I'll cover for you when you're in trouble. This sincerity is like fire. However, the human heart was the hardest to predict, and time mercilessly covered his face. A brother cuts a knife in the back, but his heart turns evil in front of interests. That night there was a storm on the street, and my brother looked at me coldly. The vows I once swore were all gone, my heart aches like a knife. Chorus: The brotherhood was broken, and tears fell between heaven and earth. The past has become clouds and mist, and my heart is full of sorrow. Memories were entangled, and the beautiful dream was completely ruined. From then on, the two sides were separated, and the friendship was no longer returned. Verse: I wander alone in the street, my mind full of old memories. The joy of being brothers was now only left with sorrow and sorrow. The cold wind blew my arms, and no one paid attention to my lonely figure. The brotherhood is gone, how can I let it go? Seeing through the love and affection of the world, the name of brothers was betrayed. From then on, he would no longer bask in the sun and walk alone into that future. All the memories were buried in the soil, no longer looking forward to the return of love. The brotherhood had become a wreckage, and fate had been arranged by itself. Chorus: The brotherhood was broken, and tears fell between heaven and earth. The past has become clouds and mist, and my heart is full of sorrow. Memories were entangled, and the beautiful dream was completely ruined. From then on, the two sides were separated, and the friendship was no longer returned. This is just a simple example of a novel. You can modify and expand the plot, character relationships, and emotional direction according to your preferences. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Self-made quill
Self-made quills were quite interesting. First, he had to find a suitable feather, such as goose feathers. Then, he treated the root of the feather so that it could be held better. Then he shaved the tip of the pen into a slanted shape, like the tip of a fountain pen, but rougher. Then, he used a knife or sandpaper to grind the tip of the pen smoother so that the ink could flow smoothly. Finally, he dipped it in ink and tried to write. The feather pen he made felt very good when he wrote. Harry Potter and the Goblet of Fire was not enough. Everyone, please click to read the novel!