Learning the basic movements of table tennis had many benefits: 1. ** Normalizing movements **: Learning basic movements at the beginning helps to establish correct and standardized movement patterns. For example, basic movements such as backhand attack and ball rub should be learned from the beginning to avoid the difficulty of subsequent improvement like people who have played for many years but whose initial movements are not standardized. It is also to avoid situations where old habits are difficult to correct. 2. [Basic Technique Enhancement]: Standard basic movements are an important part of improving table tennis skills. Basic movements such as the forehand attack, backhand attack, serve, and receive were standardized and mastered, laying a solid foundation for future technical improvement. 3. ** Avoiding Injuries **: Pay attention to the rules when learning the basic movements. This can reduce the risk of injury caused by irregular movements. This is because irregular movements are not only easy to cause injuries, but also detrimental to the improvement of technical level. 4. ** Cultivation of coordination **: The basic movements of table tennis can train the coordination of the eyes and hands (especially the right hand), which helps to improve the coordination of the body. 5. ** Tactical Understanding **: After mastering the basic movements, it will be easier to understand and learn table tennis tactics in the subsequent learning, which will help you use reasonable tactics to win the game. While watching the Olympics, you can also read the wonderful novels related to the Olympics!
For children to learn the basic movements of table tennis, the following aspects are more important: ** 1. Hold the racket ** 1. Horizontal grip: Relax your right hand, spread your five fingers, hold the head of the racket with your left hand, and put the shoulder of the racket into the tiger's mouth of your right hand. It is appropriate to feel comfortable. Straighten the thumb and index finger of the right hand. The thumb pressed the rubber in front of the racket handle. The extension line of the index finger and middle finger formed a 30-degree angle. The other three fingers naturally held the racket handle, similar to holding a kitchen knife. Pay attention to avoid the bad grip of the forehand (deep grip, the index finger moved up appropriately) and the backhand (shallow grip, the thumb moved up appropriately) and correct it in time. ** 2. Hit the ball ** 1. Forehand attack: - In terms of standing position, he stood slightly forward with his left foot. - When leading the racket, the right arm should be extended to lead the racket to the right side of the body, and the arm should be led to the right side with the belt. - When hitting the ball, swing your arm to the left with the belt, and move your center of gravity from your right foot to your left foot during the shot. - After hitting the ball, the racket was swung to the height of the head in front of the left eye, and quickly returned to the preparation position before hitting the ball. Moving the arm with the belt and quickly retracting the forearm was the core of the movement. 2. Backhand attack: - Stand close to the table and hold the racket with your right hand. - Before hitting the ball, guide the racket to the left below the abdomen. - When hitting the ball, the elbow joint is used as the axis, and the forearm is quickly swung forward and upward. Combined with the upward rotation of the wrist, the arm and wrist show the process of changing from "7" to "1". Pay attention to the wrist not to turn over, and keep a straight line with the arm. During the hitting process, the legs can use the strength of the waist to push up. 3. Forehand flat serve: - Stand as close to the table as possible, with your left foot slightly forward and your right foot slightly behind. - Hold the ball in your left hand and throw it with your palm up. The height of the ball should not be less than 16 centimeters. At the same time, your arm should be pulled to the right and the racket should be slightly tilted forward. - When the ball dropped from a high point to slightly higher than the tennis ball, hit the middle part of the ball and exert force to the front left. After hitting the ball, the first landing point was in the center of the table. After hitting the ball, the arm continued to swing to the front left and quickly returned to the preparation position. ** 3. Basic training sequence and method ** 1. First, he started with the forehand attack, then he practiced the backhand play. 2. You can practice bare-handed first. Follow the beat of the music and hit the table tennis ball bare-handed. This will help to arouse the interest of playing table tennis. At this time, the coach should observe whether the child's movements are standard and give guidance. 3. Forehand attack can be trained at a fixed point, focusing on the position of the forehand. Through repeated practice, the muscle memory can be deepened. 4. During the two-point attack practice of the forehand, he would jog on both sides of the left and right side of the table tennis training to make the forehand attack and defense more flexible. 5. Backhand attacks were trained at fixed points, and muscle memory was formed through repeated practice. 6. The left and right swing speed practice was to repeatedly train the left and right two-point attack with the forehand and backhand. The two techniques were combined to attack the ball and form muscle memory. While watching the Olympics, you can also read the wonderful novels related to the Olympics!
You can search for Coach Huang He's " 90-Day Table Tennis Zero Foundation Enlightenment Teaching 1 - 10 episodes ", which includes the first episode of interest cultivation, the second episode of position adjustment, the third episode of bare-handed movements, and many other aspects of table tennis introductory teaching content. In addition, there was also Dr. Tang Jianjun's table tennis introductory course, which could also be used as a reference for learning the basic movements of table tennis. While watching the Olympics, you can also read the wonderful novels related to the Olympics!
The basic movements of table tennis were as follows: 1. [First Incantation: The incantation cannot cover all situations. It only provides the key points. You have to rely on analogy to deal with the various changes in speed and rotation.] 2. Prepare for the match: The distance between your feet should be shoulder width and your heels should be slightly raised. Your knees should be bent and you should bend over but not raise your chest. The racket should be placed in front of your abdomen. Your eyes should be focused on the ball. Your body should be relaxed and ready to move. 3. Serve: Open your palm and throw the ball upwards. There are many ways to hit the ball after it falls. You can create up and down side spin by rubbing the ball surface. The length, weight, speed, and strength of the ball are different. 4. Receiving the ball: Use the preparation position to receive the ball. Return it according to the direction of rotation of the incoming ball. Push and block the topspin ball, rub the ball with the backspin ball. You can draw the long ball, hang the short ball, and actively compete for the attack. 5. Forehand attack: avoid lifting your elbow and relax your grip on the racket. Move your forearm forward and upward, slightly forward with your left foot and turn your body to the right, tilting the racket to hit the middle of the ball. 6. Backhand attack: Place your forearm on your abdomen and your arm close to your chest. Use your elbow as the axis to move your arm and wrist. Move your left foot back and turn your body left. Tilting the racket to hit the upper-middle part of the ball. 7. Pushing and blocking the ball: It is mostly used in the backhand direction. The action is similar to a backhand attack. The forearm forces forward and downward, tilting the racket to push and block the middle and upper part of the ball. 8. Rubbing the ball: The racket first slightly leaned back and then sent horizontally. It rubbed the middle and lower part of the ball forward, and the wrist cooperated with the forearm movement. Whether the ball turned or not depended on the wrist movement. 9. Chop: First judge the incoming ball and move, bend your legs and turn your body to lead the racket to send the ball, then lean up and rub the bottom of the ball, and make an arc motion forward and down. 10. Loop drive: swing the racket forward and rub the middle and upper part of the ball. The thinner the rub, the more the ball turns to form a loop. The rub surface is wide and the force is increased. 11. Return loop: Tilting the racket to cover the middle and upper part of the ball, adjust the center of the racket in time to relax, and move the racket from top to bottom when cutting, so that the position of the short intercept is in the middle. 12. Put the ball high: leave the table to shake the middle and lower part of the ball, send the ball forward with a high parabola, and hang the opponent's left and right corners far away. The higher the ball, the farther it is, and the more successful it is. 13. Kill the high ball: Don't be anxious when the ball bounces high. Move your position until the ball falls in the air above your forehead. Turn your arm around and press forward. You can also cut the middle of the ball diagonally. 14. Skateboard ball: The racket looks like it's hitting the ball to the right, but the wrist suddenly sends the ball to the left, and the left side of the ball is slanted to hit the ball hard to achieve the effect of diversion. 15. Short ball: When the opponent leaves the stage, it is suitable for short hanging. When it seems like a long ball, it is suitable for light delivery. The racket is flat to reduce the force and light pass the ball. The vertical board can also be used for light blocking. 16. Footwork: Footwork cannot be neglected in basketball practice. Before hitting the ball, you should move your feet first. The key is to move first before hitting. Footwork confusion will lead to failure of the technique. While watching the Olympics, you can also read the wonderful novels related to the Olympics!
The common basic movements of table tennis included short swing, long chop, pick, push, block, quick tear, quick pull, side cut, loop drive (including forehand loop drive and backhand loop drive), smash, chop, quick dribble, forehand attack, backhand drive, rub, serve, and pull loop drive. These basic movements covered all aspects of table tennis, such as serving, receiving, attacking, and defending. Mastering these basic movements would help to improve the level of table tennis skills. While watching the Olympics, you can also read the wonderful novels related to the Olympics!
The basic movements of table tennis can be divided into five types, namely, the forehand and the backhand. The basic movements of the forehand were as follows: 1. Short Throw: It is used to put the opponent's backspin or no-spin ball in front of the net and land in the front half of the opponent's table, making it difficult for the opponent to attack. It is more effective against the backspin ball near the net, but it is difficult for the long ball or the no-spin ball. 2. [Long Hack: Hack the opponent's backspin or no-spin ball behind the net. The ball will land on the back half of the opponent's table. It can give the opponent pressure. It has fast speed, long line, strong spin, low arc, and fierce shot. It works better with short swing.] 3. Pick and Play: Use a combination of impact and friction to touch the ball. The backspin ball touches the middle and lower part of the ball, and the friction is greater than the impact. The topspin ball touches the middle part of the ball, and the impact is greater than the friction. When hitting the ball, the forearm and wrist are forward and upward or slightly upward. The ball is picked up to produce a certain upspin and the speed is faster, hitting the opponent's weak point. 4. Forehand attack: Attacks the opponent's topspin or no-spin ball, causing the ball to produce strong topspin and speed, hitting the opponent's empty space or scoring directly. 5. Forehand Loop: Pulling up against the opponent's topspin or no-spin ball, causing the ball to produce an arc and topspin. The speed is slow and hits the opponent deep or on both sides. The basic movements of the backhand were as follows: 1. Put short: Use the backhand to place the opponent's backspin or no-spin ball in front of the net, landing in the front half of the opponent's table, forcing the opponent to make it difficult to attack. 2. Hack Long: Use the backhand to hack the opponent's backspin or no-spin ball behind the net, landing on the back half of the opponent's table to give the opponent pressure. 3. Backhand Pull: Pull up the opponent's topspin ball or no-spin ball, producing a certain topspin and faster speed, hitting the opponent's weak point. 4. Reverse Tear: It can be seen as a horizontal board backhand or a straight board backhand reverse fast belt, tearing the opponent's topspin ball or no-spin ball, producing a strong side spin and speed. The landing point is low, hitting the opponent's empty space or scoring directly. 5. Backhand Loop: Pulling up the opponent's topspin or spinless ball, causing the ball to produce an arc and topspin. The speed is slow and hits the opponent deep or on both sides. While watching the Olympics, you can also read the wonderful novels related to the Olympics!
The following are some basic table tennis training methods: ** 1. Forehand attack training ** 1. ** Action Requirement ** - From the lead to the shot to the recovery process, he had to pay attention to the completeness of the action, experience the shift of the body's center of gravity between the legs, and avoid standing on both feet and hitting the ball with only the upper body or arms. - At the beginning of the practice, the rhythm should be stable and the movements should be coherent. There was no need to exert great strength or hit the ball very quickly. As the practice progressed, the requirements for the quality of the ball could be improved. For example, keep the hitting point in front of the body and hit the ball to the same area of the opposite table. 2. ** Training Method ** - First, he had the foundation of "bare-handed swing", and then he went from "without the ball" to "with the ball". It was the first training subject that many people came into contact with on the stage. ** 2. Forehand two-point attack training ** 1. ** Action Requirement ** - For right-handed rackets,"two points" generally referred to the center and right half of the table. He had to use the side-by-side movement to find the "point" to hit the ball, strengthen the awareness of the movement under his feet, and grasp the rhythm of the ball. 2. ** Training Method ** - The speed of the training partner feeding more balls should not be too fast, taking into account the effectiveness and coordination of the trainee's movements. ** 3. Forehand three-point attack training ** 1. ** Action Requirement ** - "Three points" was from the right half of the table to the middle of the table and then to the left half of the table. It required the use of footwork to hit the ball while moving, which was twice the use of footwork compared to the two-point attack. It was necessary to adjust the breathing to maintain a stable movement. When moving from right to left, the angle of the body gradually increases (15 - 20 degrees in the middle and 35 - 45 degrees in the left). 2. ** Training Method ** - Experience different strokes at different points and improve the continuity of the forehand movements through this training. ** 4. Backhand fixed-point/two-point attack training ** 1. ** Action Requirement ** - The backhand attack training method was basically the same as the forehand attack training method, but the backhand position movement structure was relatively simple. In the backhand fixed-point attack, the racket hit the ball steadily in front of the chest and hit the ball in a "top-off" manner. However, the wrist movement was added more. The range of movement was smaller than that of the forehand, but the details of the action such as the lead, reduction, and the use of the body's center of gravity were complete. - For amateurs, it is recommended to start the backhand fixed-point attack practice after the two or three point attack of the forehand. This way, you will have the knowledge of the forehand practice and the foundation of the movement footwork, which will help to improve the backhand technique. 2. ** Training Method ** - According to the requirements, he would be given a fixed or two-point batting training. ** 5. Fixed point swing speed training ** 1. ** Action Requirement ** - This was a training that combined the backhand and backhand attacks. One hit the ball with the forehand and then with the backhand. It was important to pay attention to coordination and quality. It was not just about speed or just hitting the ball out. 2. ** Training Method ** - At the beginning, you can stand on the left half of the table, switch from backhand block to forehand attack and then back to backhand block. If it is difficult to block on one side or the rhythm is not good, you can increase it to two or three times on one side. ** 6. Two-point swing speed/unfixed swing speed training ** 1. ** Action Requirement ** - Two-point swing speed was used to connect the forehand fixed-point and backhand fixed-point attacks. It required the footwork under the feet to be in place, the body to be flexible, and to stand in place before hitting the ball. - It was difficult to swing at an unfixed point. It was close to actual combat. The coverage of the hitting point was large, and there were many changes in the way the hand hit the ball. It required a solid foundation before it could be carried out. 2. ** Training Method ** - Gradually carry out two-point swing speed and fixed-point swing speed training according to your own foundation. ** 7. Pushing and catching training ** 1. ** Action Requirement ** - When taking the racket, draw your forearm back to your abdomen, so that the clap is close to your chest in front of your body, and lean forward. When hitting the ball, the center of gravity of the body shifted slightly to the right foot. 2. ** Training Method ** - Through multi-ball practice, you can repeatedly push and receive movements to experience the key points of the movements and improve the proficiency and stability of the movements. ** 8. Rubbing Training (Take Forehand Rubbing as an example)** 1. ** Action Requirement ** - Small movements, quick moves, and strong concealment. When receiving the ball, the racquet face is tilted back, and the ball is hit forward or down according to the rotation strength of the ball. When he was rubbing the ball with his forehand, his elbow should be closer to his body. When he rubbed the ball with his right foot, his left foot should also follow suit. 2. ** Training Method ** - Practice with the ball more often, cooperate with the sparring partner, practice the different methods of rubbing the ball, and improve the accuracy and control of the rubbing ball. While watching the Olympics, you can also read the wonderful novels related to the Olympics!
The third episode of Learning Ping-Pong Shake-hand Rap for the Whole People explained the essentials of the shake-hand attack in detail, including the three states in table tennis, the preparation state of the shake-hand attack, the prediction state of the shake-hand attack, the final state of the shake-hand attack, the relative stability and absolute relaxation of the game, the importance of the restoration of the movement after hitting the ball, the correction method of the wrong movement of the shake-hand attack, and the strengthening practice method of the dynamic setting. However, no more teaching content about the basic movements of shake-hand was found. While watching the Olympics, you can also read the wonderful novels related to the Olympics!
The following is a tutorial on the basic movements of table tennis: 1. ** Gripping posture **: Open your palm naturally. Gently clamp the racket handle with your thumb and index finger. The middle finger, ring finger, and pinky should be close to the edge of the racket. Keep your wrist relaxed. This will help you exert more strength. 2. ** Body Balance **: Place your center of gravity between your legs, spread your feet shoulder-width apart, bend your knees slightly to keep your leg muscles tense, and lean your body slightly forward. This will allow you to deal with your opponent's attacks more effectively. 3. ** Batting Postures **: - Keep your upper body stable and lean forward slightly to make the shot more effective. - Pressing your elbow down can provide more power when hitting the ball. - When hitting the ball, focus on the center of the ball to ensure accuracy. 4. ** Shooting Point and Position **: - When standing, both feet should be shoulder width and parallel, 30 - 40 cm away from the table. - You must hit the ball in the middle and late stages of the rise of the incoming ball, and make sure to hit the ball in front of you. During the process of hitting the ball, you must not retreat. 5. ** Waist and hip movement **: When you see the ball pass the net, shift your center of gravity to your right leg, rotate your waist and hip to the right at the same time, and open your arms horizontally to the back of your body. Be careful to avoid pulling your elbow and shaking your shoulders. 6. ** Movement after touching the ball **: After touching the ball, wave your arm to the left, front, and upper. The forearm will have a small retracting movement and then stop. Let the racket head stop in the middle of the forehead or slightly to the left eye. Then, quickly restore it to prepare for the next shot. 7. ** Note **: - It was not advisable to use too much force during the initial practice. One should pay attention to the control of strength. As the technique improved, the strength should be gradually increased. At the same time, pay attention to the angle of the ball to ensure that the ball landed steadily in the opponent's field. - It was very important to practice bare-handed swings and should be practiced step by step. While watching the Olympics, you can also read the wonderful novels related to the Olympics!
The main points of the table tennis attacks are as follows: - [Grip method: There are penhold grip and horizontal grip.] - Ready posture: Relax your whole body. Take the racket in your right hand as an example. Your left foot is in front and your toes are slightly buckled. Your right foot is slightly behind. Your feet are slightly wider than your shoulders. Your body is inclined to the right and you are standing on the table. He bent his knees slightly, leaned his upper body forward, held his chest, and sucked in his abdomen. His body weight fell on the front soles of his feet, and his heels did not leave the ground. The upper arm of the right hand drooped outward and opened about a fist's distance and was fixed to the side of the body. The angle between the forearm and the upper arm was between 90 degrees and 120 degrees. The shoulder and wrist were relatively fixed. The straight forehand attacked with the thumb slightly pressed down, the index finger slightly relaxed, and the horizontal forehand attacked with the thumb slightly relaxed close to the middle finger. - Ripping action: The right arm turns horizontally with the waist to the right back of the body. The racket face is slightly tilted forward about 80 degrees, and the right shoulder is slightly lowered. - The action of hitting the ball: kick the leg, top the hip, turn the waist, swing the arm horizontally from the right back to the left front, and at the same time, retract the forearm slightly upward. The big arm moves forward slightly with the forearm contraction, hitting the ball at the high point of the ball. When exerting force, the hand with the belt, the hand with the belt swing from the right back to the left front, and at the same time, the forearm is pulled back to exert force, basically at the same time, and when hitting the ball, you must take the initiative to meet the ball. - Restore action: After hitting the ball, quickly return to the reserve position to prepare for the next hit. When attacking the ball with a forehand near the table, the left foot can touch the ground slightly after hitting the ball, and the center of gravity can be shifted from the left foot back to the middle of the body to quickly restore. Different types of forehands attack (such as straight, horizontal, near, middle, etc.) have certain differences in the details of the action. For example, when the straight board is close to the table and the ball is attacked with a forehand, the body is about 50 centimeters away from the table, and the arm naturally relaxes to maintain a certain degree of curvature. When the ball jumps to the high point, the arm quickly swings to the left, front, and upper part of the ball. At the same time, the center of gravity shifts from the right foot to the left foot. In the middle of the court, when attacking the ball with the forehand, stand about 1 meter away from the table, naturally bend the arm, the face of the racket is close to vertical, and the waist and hip rotate to the right to lead the racket to the right back of the body. In the middle of the ball in the early stage of the ball's descent, the main strike is slightly upward friction, the upper arm drives the forearm to accelerate the swing to the upper left, the waist and hip move to the left, and the center of gravity shifts from the right foot to the left foot. The crosspiece's near platform, the middle platform's attack was basically the same as the straight board. In addition, in the process of the forehand attack, attention should be paid to avoid problems such as the arm actively swinging forward and pulling back, the waist turning movement being too large, the racket height being too high or too low, the shoulder and the arm actively exerting force, etc., and also pay attention to maintaining the correct direction of the forearm contraction, that is, the forearm and the arm basically overlap from the front, and the elbow joint, forearm, and arm move on the same plane. While watching the Olympics, you can also read the wonderful novels related to the Olympics!
The basic skills training of table tennis included the following aspects: * * 1. Basic Techniques ** 1. * * Gripping posture **: This is the starting point of table tennis training. The correct grip posture is helpful for the subsequent technical movements. 2. * * Forehand related ** - [Forehand Attack]: It was the basic offensive technique of the Forehand. During training, one should pay attention to the standard of the movements, including the lead, swing, hitting point, and the moment of hitting the ball. - [Forehand Ball Rubbing]: Master the ball rubbing technique and can handle balls with different rotations such as backspin. During training, you should experience the feeling of rubbing the ball and control the strength and rotation of the ball. - Forehand topspin and backspin: This requires a good judgment of the rotation of the ball. When pulling the ball, you need to adjust the shape of the racket and the direction of the force to create a suitable arc and rotation. - Forehand high ball defense: Learn to deal with the opponent's strong attacks, maintain a stable movement during defense, and control the landing point of the good ball. - [Forehand Pick]: This is used when dealing with short balls in the ring. It requires small and flexible movements to accurately pick up the ball and control it to the right position. - * * Forehand reverse dribble **: During the stalemate phase, quickly reverse the incoming ball to change the rhythm and direction of the ball. 3. * * Backhand related ** - Backhand Attack: Similar to the Forehand Attack, the Backhand Attack is the basic attack method of the Backhand. Pay attention to the stability of the movement and the coordination of the force. - Backhand Rubbing: Just like the forehand rubbing, it is a basic technique to deal with the backspin. You must master the ability to rub and control the ball. - Backhand topspin and backspin: This is very important to enrich the backhand technique system, so that you can effectively return the ball under different spin conditions. - Backhand bounce: A fast counterattack technique. The action is short and powerful. It can quickly return the ball at close range. - Backhand Twist: When handling the ball in the ring, twist the ball up with the force of the wrist. It is sudden and aggressive. 4. [Plain serve: This is the most basic serve technique. You must master the action, strength, and landing point of the serve.] * * 2. The center of gravity is related to footwork ** 1. * * Center of Gravity Shift Training **: During the process of hitting the ball, the shift of the center of gravity is crucial. For example, when attacking the ball with the forehand, the center of gravity would shift from the right foot to the left foot from the beginning of the racket. At the moment of hitting the ball, the center of gravity would be pressed onto the left foot, and then it would quickly return to normal after hitting the ball. Not only could this increase the strength of the ball, but it could also ensure the continuity of the action. 2. * * Footwork Training ** - * * Slide-step practice **: This is a basic footwork for moving horizontally. It is often used when dealing with balls that change their landing point. - * * Small Step Training **: It is used to make fine adjustments in place, adjusting the body position and center of gravity, and preparing for the next big step movement. - * * Parallel Step **: It can be used to practice "two points hitting one point" with the forehand and "two points hitting one point" with the backhand. It can move quickly between different landing points. For example, when a two-point attack was used, the player would move between the two landing points to hit the ball. - * * Side Footwork **: For example, when attacking the ball from the side, you can cross two steps back. This is very important for attacking from the backhand position. - * * Forehand Footwork (Positive Cross)**: After hitting the ball sideways, the footwork used to quickly rush to the Forehand position to return the ball. - * * Footwork (parallel steps diagonally and vertically)**: Used to deal with the change of the ball's landing point, such as the combination of long and short balls against the opponent. * * 3. Other Training Points ** 1. * * Movement Styling Practice ** - You can practice by feeding the ball to an expert. If you don't have a target to practice with, you can watch the tutorial video, imitate the swing in front of the mirror, and imagine the existence of the opponent to shape the action. The practice content should be comprehensive, including common techniques such as the forehand attack, the backhand push, and the backspin. 2. * * Combined with the practice of technique shaping ** - When you have a certain level of basic skills, practice should be close to actual combat. For example, combination techniques such as left push and right attack, push block and side attack, rubbing the ball and turning to pull, etc. He could also practice common routines, such as serving a backspin ball, pulling up after the opponent rubbed it over, and attacking after the opponent blocked it. 3. * * Practice when the style is basically fixed ** - Practice according to your own style or the direction of your style. For example, when it came to the backspin, he would practice according to the different techniques he was good at, such as pulling up, charging, assaulting, picking, swinging, adding turns, or throwing. 4. * * Eye and hand exercises ** - Eye skills were the skills of staring at the ball. One had to be able to capture the movement trajectory and speed of the table tennis ball and grasp the timing of hitting the ball. Hand skill was the core of grasping the quality of the ball. It was necessary to ensure that the technique was in place to control the rotation, landing point, and speed of the ball. 5. * * Diverse practice methods ** - * * Multi-ball feeding **: After mastering the movement, continuously feed the ball to the same movement through multi-ball training to fix the movement. - * * Physical training **: improve physical fitness and provide better physical support for table tennis. - * * Machine training **: Practice using the table tennis training machine. - * * Find a professional training partner or coach **: Training under the guidance of a professional can improve your skill level more efficiently. - * * Other auxiliary exercises **: For example, bouncing the ball with a racket, hitting the wall, and continuously hitting the wall, etc., can also help to improve the technical level. While watching the Olympics, you can also read the wonderful novels related to the Olympics!