webnovel
Reaction of Metal and Acid

Reaction of Metal and Acid

2026-11-18 04:23
1 answer

In junior high school chemistry, the reaction between metal and acid mainly had the following points: ** 1. Condition for the reaction to occur ** The metals in the sequence of metal activity before hydrogen could react with acid to form hydrogen. The mobility order of common metals is: Mn> Mn. ** 2. Reaction Speed ** 1. ** Effect of metal activity on reaction rate ** - When different metals of the same mass (such as Mn, and Mn) react with a sufficient amount of acid (such as sulfuric acid or dilute sulfuric acid), the speed of the reaction (i.e., the amount of hydrogen produced in the same time) is determined by the mobility of the metal. Under certain conditions such as temperature, metal particle size, and solute mass fraction of the diluted acid solution, the stronger the mobility of the metal, the faster the formation of hydrogen. For example, the reaction of acid with titanium produces hydrogen faster than that of aluminum, which is faster than that of iron, and which is faster than that of iron. 2. ** Reflection of reaction speed in the image ** - When the abyssal coordinate was the reaction time and the ordinate was the mass of hydrogen, the greater the inclination of the diagonal line, the faster the reaction rate. The order of metal activity could be determined according to the inclination of the curve. The greater the inclination, the stronger the metal activity. ** 3. Quality of hydrogen produced ** 1. ** When the acid is excessive (the metal is completely reacted)** - When a metal of the same mass reacted with a sufficient amount of diluted acid, the maximum amount of hydrogen produced was determined by the metal. When the metal had the same valency, the greater the relative atomic mass of the metal, the less hydrogen was generated; the more hydrogen was generated, the smaller the relative atomic mass of the metal. For example, the mass relationship of the hydrogen gas produced by the reaction of the same mass of Mn, and Mn with a sufficient amount of the same mass of the same concentration of the same mass of Mn, and Mn was: - According to the chemical equation, the mass ratio of the metals participating in the reaction was 18:24:56:65. 2. ** When metal is excessive (acid completely reacted)** - When the same acid of the same mass and concentration reacted with a sufficient amount of different metals (such as Mn, Mn Because the acid completely reacted, the hydrogen element in the hydrogen gas came from the acid. The same amount of acid produced the same amount of hydrogen gas. 3. ** Special calculation method (such as mixture calculation)** - When it involved the reaction of two metal compounds with acid to produce a certain amount of hydrogen, the limit method could be used to calculate. Assuming that the metals of a certain mass were all the same metal, the mass of hydrogen that could be produced after they reacted with the acid was calculated, and then the possible composition of the mixture was judged according to the actual mass of hydrogen produced. For example, 120 grams of a mixture of two metals reacted with acid to collect 8 grams of hydrogen. By calculating the mass of hydrogen produced by the complete reaction of 120 grams of titanium, aluminum, titanium, and iron with sulfuric acid, and then analyzing it, it was necessary to choose one from titanium and aluminum.(Because the mass of hydrogen produced by their reaction alone is greater than 8 grams), they can choose another metal from the three metals of copper, iron, and copper (if copper does not react, the mass of hydrogen produced is 0). Therefore, the possible combinations are: ** 4. Image Problem Category ** 1. ** The same amount of metal reacted with a sufficient amount of acid (excessive acid)** - When the abyssal coordinate is the reaction time, the same mass of Mn, and Mn react with a sufficient amount of the same acid of the same mass and concentration. The reaction rate relationship is: Mn> Mn> Mn, Mn> Mn, and the mass relationship of the final hydrogen produced is: Mn> Mn> Mn. - When the abyssal coordinate was the mass of the acid, the same mass of Mn, and Mn reacted with a sufficient amount of sulfuric acid of the same mass and concentration. After the metals completely reacted, the mass relationship of the final hydrogen produced was: Mn, Mn 2. ** An equal amount of acid reacted with a sufficient amount of metal (insufficient acid, excessive metal)** - When the abyssal coordinate is the reaction time, the same acid with the same mass and concentration and a sufficient amount of Mn, and Mn react sufficiently respectively. The reaction rate of producing hydrogen is: Mn> Mn, and the mass relationship of producing hydrogen is: Mn = Mn. - When the abyssal coordinate is the mass of the metal, the same acid of the same mass and concentration will react with a sufficient amount of Mn, and Mn respectively. The mass relationship of the final hydrogen produced is: Mn = Mn = Read more exciting novels for free

Metal Puppets

Metal Puppets

The global war ended two hundred years ago, not with a bang, but with a whimper. Nations fought until resources were almost completely exhausted. By the time a cease-fire was called, the ability to return to the pre-war industrial era was nearly impossible. With the lack of resources, humanity declined to a quasi-medieval society of city states. Now 200 years later "Metalmancers" or those with the ability to control and shape metal have started to appear. With these Metalmancers and their abilities to salvage and possibly operate pre-war technology, forces have started to come into play to vie for control, once again sending this scarred planet into war. Mand and Val are two such Metalmancers who have been living on their own for the past several years. With new forces in play and old enemies on their trail, will they be able to lean on each other to survive this new emerging world? ** It's really hard to fly a dragon made of metal. They could of made a bull, a horse, or really any simple device that could haul a wedge-shaped plow, but someone insisted that they try and build a bloody dragon. That someone now had her hands wrapped around Mand's waist and was having the time of her life. "See, I told you this was a great idea," Val exclaimed. "We'll have that field done in no time!" "You're not the one trying to steer this thing," Mand returned. "Now be a good sister and lower the tail so we can get to work." Mand felt Val shift her weight and suddenly become very still as she began to concentrate. Inside the shell of the dragon, a complex system of gears began to whirr and rotate. The dragon's tail began to curve beneath the belly of the construct, until the wedge-shaped tip curved towards the ground. Mand had her work cut out for her as well. She focused her mind on pumping the dragon's wings to keep aloft. The descended tail made the whole operation twice as taxing as it was before. The tail clicked in place and Mand began their pass towards the field below. "Are you sure this will work?" she questioned her sister. "It's my butt too," Val pouted. "You should have more faith in my plan!" Mand brought the dragon closer and closer to the earth. She began to sweat as the ground inched closer. Finally, at the edge of the field, the tip of the tail sunk into the soft earth, plowing a furrow as the dragon swooped along. When the dragon reached the far end of the field, Mand pumped the wings to get them back in the air. It was only when she brought the dragon around for another pass that she realized how hard she was breathing. "See, I told you this would work!" Val shouted happily, kicking her legs out as they approached the field once again. Mand felt darkness overtake her.
Sci-fi
63 Chs
Heavy Metal Blues Box Set

Heavy Metal Blues Box Set

Multi-published author J.D. Walker brings you four gay erotic romances that will warm your heart, from the quirky story which pits a country music fan against a "metal boy" to the bittersweet tale of a rigid CFO who always says the wrong thing to the man he loves. Housemates, secrets, a sunny attitude, and an executive who needs to let loose all connect to bring each other out of the Heavy Metal Blues.<br><br>Contains the stories:<br><br><strong>Heavy Metal Cowboy Blues</strong>: Lester "Les" McCoy loves his country music. He's also in lust with Damien Ridley -- the 'metal boy' who lives downstairs -- despite his very loud music tastes which drive Les crazy! He's an old prairie bachelor, and thinks Damien is too young for him. But, a gay-bashing and some friendly advice lead Les to use Patsy Cline and canary yellow underpants to get the stud he's always wanted.<br><br><strong>Heavy Metal Bicycle Blues</strong>: Kenny Culpepper is a spin instructor, but he used to do more with his life. He’s still recovering from the homophobic attack by his former roommate, Biff Tremonte, and when he receives a letter from Biff’s brother, Kenny’s not sure what to do. But the two men meet, and Cypher Tremonte confesses that he was also a victim of Biff’s rage. What they find together is unexpected, and could become love.<br><br><strong>Heavy Metal Sunshine Blues</strong>: Sonny Bonhomie is happy to sleep with Noah Stiles, a sexy guy he meets at a club. But then he finds out that Noah has a boyfriend, and confronts him about it. Worse, Noah tells Sonny the real reason he slept with him in the first place. Heartbroken, Sonny goes to a new LGBT bookstore and runs into Bruce, a bartender he knows. They hit it off, and Sonny’s sunshine blues might just be over.<br><br><strong>Heavy Metal Heartfelt Blues</strong>: Bridges Barfield is a stern, rigid man who’s hard to please. But then he meets Trenton LeDoux, he of the magenta hair, lip ring, and free spirit, and they hit it off. Trenton seems to be stuck in the past with his dead husband, however. Bridges tries to help, but suffers from saying-the-wrong-thing disease. It takes many missteps before these men finally have a union that’s truly heartfelt.
LGBT+
46 Chs

Acid and Metal Reaction Color

Different metals may react with acid to produce different colors: - The reaction between the dilute sulfuric acid and the dilute sulfuric acid produced a large number of bubbles. The chemical equation was: Mn +2HQ = Mn Cl2 + Mn Cl2, Mn + Mn Cl2 = Mn Cl2 + Mn Cl2 + Mn - The reaction between the two metals was intense and produced a large number of bubbles. The chemical equation was as follows: Mn +2HQ = Mn Cl2 + Mn Cl2, Mn + Mn Cl2 = Mn Cl2 + Mn Cl2 + Mn Cl2 = Mn Cl2 + Mn Cl2 = Mn Cl2 + Mn Cl2 + Mn Cl2 = Mn Cl2 + Mn Cl2 = Mn Cl2 + Mn Cl2 + Mn Cl2 = Mn Cl - When iron reacted with diluted sulfuric acid or sulfuric acid, a small amount of bubbles appeared on the surface of the nail. At the same time, the solution turned light green because of the formation of iron sulfuric acid or iron chloride.The reaction equation was: FeCl2 <2>+ H <2>, FeCl2 <2>= FeCl2 <2>+ H <2>, FeCl2 <2>= FeCl2 <2>= FeCl2 <2>+ H <2>. - Copper does not react with dilute sulfuric acid or dilute sulfuric acid. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>

1 answer
2026-07-01 02:46

Reaction of Propionic Acid with Metal

Due to its weak acid nature, it was corrosive to many metals. It could react with metals to form hydrogen and metal proprionate. For example, the reaction of proprionic acid with iron: Fe2 + 2CH3CH2COON = (CH3CH2COO) 2Fe2 + H2. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>

1 answer
2026-09-16 18:46

The Image Problem of the Reaction of Metal and Acid

In the image problem of the reaction of metals with excessive acid, the following situations were mainly involved: ##1. The horizontal coordinate is reaction time. 1. ** Reaction Rate Relationship ** - When different metals react with excess acid, the reaction rate depends on the mobility of the metal. In the middle school chemistry exam, the metal activity was in the order of Mn> Mn. This meant that under the same conditions (such as the same concentration of acid, the same temperature, the size of the metal particles, etc.), the reaction rate from fast to slow was also: Mn> Mn. The image showed the degree of inclination of the diagonal line. The greater the inclination, the faster the reaction speed. 2. ** The final mass of hydrogen produced ** - When the same amount of different metals react with an excess of acid, the mass of hydrogen produced is related to the relative atomic mass of the metal (when the metal has the same valency). According to the chemical equation, the mass relationship of hydrogen produced by the reaction of a metal of the same mass with a sufficient amount of acid was as follows: The higher the platform, the greater the mass of hydrogen produced. ##2. The horizontal coordinate is the mass of the acid. 1. ** Reaction process analysis ** - In the process of increasing the mass of acid, the metal will react completely because there is a small amount of metal (acid excess). The quality of the corresponding acid after the reaction of different metals was different, and the quality of the hydrogen produced was also different. 2. ** Phased analysis of the quality of hydrogen produced ** - At different stages, depending on the activity and relative atomic mass of the metal, there would be different situations where the metal was in excess or completely reacted, which would affect the amount of hydrogen produced. For example, in a certain interval, there may be excessive or complete reaction of the iron, the aluminum, and the aluminum. At this time, the quality of the generated hydrogen would have a specific situation. As the acid quality increased, when entering the next interval, there may be insufficient amount of the iron, or the iron may be excessive or complete reaction. The aluminum and the aluminum may be excessive, and the quality of the hydrogen would change accordingly. ##3. Key Points 1. ** Judging excessive and small amount ** - First of all, he had to judge the excessive and small amount of metal and acid through the description in the question. For example, he could see the words "small amount","sufficient amount","excessive amount", etc. The final amount of hydrogen produced in the reaction was determined by the small amount of the reagent. 2. ** Explain the meaning of the horizontal and vertical coordinates ** - When analyzing the image, it was necessary to distinguish the specific meaning of the horizontal and vertical coordinates in the image. Generally, the vertical coordinate was the amount of hydrogen produced, and the horizontal coordinate might be the reaction time, the mass of acid consumed, or the mass of metal consumed. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>

1 answer
2026-07-01 23:27

Image of the reaction of the same amount of metal and acid

1. ** Reaction of the same amount of metal with sufficient acid (horizontal coordinate is reaction time)** - Reaction rate relationship: When the same mass of Mn, and Mn react with a sufficient amount of the same acid of the same mass and concentration, the reaction rate relationship is: Mn> Mn. This was because under the conditions of a certain temperature, metal particle size, and solute mass fraction of the diluted acid solution, the stronger the mobility of the metal, the faster the reaction to produce hydrogen. - The mass relationship of the final hydrogen produced: The mass relationship of the final hydrogen produced is: 2. ** Reaction of the same amount of metal with sufficient acid (the horizontal coordinate is the mass of acid)** - When the same mass of Mn, and Mn reacted with a sufficient amount of sulfuric acid of the same mass and concentration, and the metals completely reacted, the mass relationship of the final hydrogen produced was: Mn> Mn. 3. ** Reaction of an equal amount of acid with a sufficient amount of metal (horizontal coordinate is reaction time)** - Reaction rate relationship: When the same acid with the same mass and concentration and sufficient amount of Mn, and Mn react sufficiently, the reaction rate relationship of hydrogen is: Mn> Mn. - The mass relationship of the final hydrogen produced: The mass relationship of the final hydrogen produced is: 4. ** Reaction of an equal amount of acid with a sufficient amount of metal (the horizontal coordinate is the mass of the metal)** - The mass relationship of the final hydrogen produced: When the same acid with the same mass and concentration and a sufficient amount of Mn, and Mn react sufficiently, the mass relationship of the final hydrogen produced is: Mn = Mn. When analyzing the image problem of the reaction between metal and acid, it was necessary to pay attention to the specific meaning of the ordinate and ordinate in the image. Generally, the ordinate was the amount of hydrogen produced, and the ordinate was usually time/s or the mass of acid consumed/g or the mass of metal consumed/g. At the same time, it was necessary to judge the amount of metal and acid. The amount of hydrogen produced in the reaction was determined by the amount of acid in the reaction. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>

1 answer
2026-06-30 16:39

Reaction Law of Nitric Acid with Metal and Nonmetal

1. ** Reaction law of nitrates and metals ** - ** Passivation phenomenon **: Metal such as iron, aluminum, and aluminum are easily dissolved in dilute sulfuric acid, but they are not dissolved in cold concentrated sulfuric acid. This is due to the occurrence of a passive phenomenon. - ** Reaction with non-active metals ** - When the metal activity order table showed that the metal reacted with the metal after hydrogen, it could be seen that the metal was first oxided by the acid, and then the metal reacted with the acid to form nitrates. The main reduction product of concentrated sulfuric acid was NO2, and the main reduction product of diluted sulfuric acid was NO. For example, the reaction of silver with concentrated sulfuric acid: <2Ag +2HNO3 (concentrated)= Ag2O +2NO2 + H2O>,<Ag2O +2HNO3 = 2AgNO3 + H2O>, the total reaction is <2Ag +2HNO3 (concentrated)= AgNO3 + NO2 + H2O>; The reaction of silver with diluted sulfuric acid: <3Ag +4HNO3 (diluted)= 3AgNO3 +NO +2H2O>. - ** Reaction with active metals **: When sulfuric acid acts with the metal before hydrogen in the metal activity order table, in addition to the corresponding nitrates, the sulfuric acid may be further reduced to substances such as <anno data-annotation-id ="00000000 - 4000 - 4000 - 4000 - 8000 - 9000000000"></anno>,</anno>, and </anno>. In general, active metals react with concentrated sulfuric acid to form <anno data-annotation-id ="00000000 - 4000 - 4000 - 8000 - 8000 - 90000000000"> NO2 </anno>, dilute sulfuric acid to form <anno data-annotation-id ="0000000 - 4000 - 4000 - 9000 - 900000000000"> NO </anno>, and extremely dilute sulfuric acid to form <anno data-annotation-id ="20000a000000 - 90000000000"></anno></anno></anno>. For example, the reaction of calcium with different concentration of sulfuric acid: - \(Mg + 4HNO_3(16mol/L)=Mg(NO_3)_2+2NO_2↑+2H_2O\) - \(3Mg + 8HNO_3(6mol/L)=3Mg(NO_3)_2+2NO↑+4H_2O\) - \(4Mg + 10HNO_3(2mol/L)=4Mg(NO_3)_2+N_2O↑+5H_2O\) - \(4Mg + 10HNO_3(1mol/L)=4Mg(NO_3)_2+NH_4NO_3+3H_2O\) - \(5Mg + 12HNO_3(0.5mol/L)=5Mg(NO_3)_2+N_2↑+6H_2O\)。Moreover, the thinner the sulfuric acid was, the lower the valency of the nitrogen in the reduction product. However, it could not be mistaken that the dilute sulfuric acid had a stronger oxidisation ability than the concentrated sulfuric acid. In fact, the more concentrated the sulfuric acid was, the stronger the oxidisation ability was. - ** Special Metal Reaction **: Metal such as tin, stibine, and tungsten do not have much effect on nitrates. They may form an oxide-like substance that is not dissolved in nitrates, but they cannot form nitrates. 2. ** Reaction law of sulfuric acid and non-metals **: When sulfuric acid and non-metals react, it only shows the oxidisation property. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>

1 answer
2026-07-01 21:39

How to calculate the reaction between metal and acid?

以下是解决金属与酸反应有关计算题的一般方法: **一、判断过量情况** 1. **根据题干信息判断** - 仔细查看题干中是否有“少量”“足量”“过量”等关键词来确定金属和酸谁过量。例如,如果提到“等量的金属分别和足量的酸反应”,就是酸过量;如果是“等量的酸分别和足量的金属反应”,则是酸不足(金属过量)。 2. **对反应结果的影响** - 反应中最终产生氢气的多少是由反应物中少量的那个量决定的。 **二、计算氢气产生量** 1. **根据化学方程式计算** - 初中化学中常考察的金属有镁(Mg)、铁(Fe)、锌(Zn)、铝(Al)。例如镁与稀硫酸反应的化学方程式为\(Mg + H_{2}SO_{4}=MgSO_{4}+H_{2}\uparrow\),根据化学方程式中金属与氢气的化学计量数之比以及金属的相对原子质量来计算氢气的产量。当金属的化合价相同时,对于相同质量的金属,金属的相对原子质量越大,生成的氢气越少;生成的氢气越多,金属的相对原子质量越小。 - 例如等质量的镁和锌与足量稀硫酸反应,根据化学方程式\(Mg + H_{2}SO_{4}=MgSO_{4}+H_{2}\uparrow\),\(Zn + H_{2}SO_{4}=ZnSO_{4}+H_{2}\uparrow\),24份质量的镁生成2份质量的氢气,65份质量的锌生成2份质量的氢气,所以等质量时镁产生氢气更多。 2. **利用极限法(针对混合物)** - 假设混合物中的金属全部是其中一种金属,分别计算出它们与酸反应产生氢气的量,再与实际产生氢气的量进行比较。例如有120克两种金属混合物与硫酸反应产生8克氢气,假设120克全是镁,根据化学方程式计算出产生氢气的质量为10克;假设120克全是铝,产生氢气质量约为13.33克;假设120克全是锌,产生氢气质量约为3.69克;假设120克全是铁,产生氢气质量约为4.29克。通过比较可知要从镁、铝中选择一种(因为它们单独反应产生氢气量大于8克),从锌、铁、铜(铜与酸不反应,产生氢气量为0)中选择另一种,从而确定可能的金属组合。 **三、分析反应速率(针对多种金属与酸反应)** 1. **依据金属活动性判断** - 在温度、金属颗粒大小和稀酸溶液溶质质量分数一定的条件下,金属的活动性越强,生成氢气就越快;生成氢气越快,说明金属的活动性就越强。例如镁、锌、铁、铝与酸反应时,镁的活动性最强,反应速率最快,在图像上表现为相同时间内产生氢气的量最多(纵坐标表示氢气量,横坐标表示时间时)。 **四、分析坐标图像(如果是图像类计算题)** 1. **明确横纵坐标含义** - 一般纵坐标是产生氢气的量;横坐标通常会是时间/s或者消耗酸的质量/g或消耗金属的质量/g。 2. **分析图像特殊点** - 关注起点:起点一般有三种情况,从原点开始;开始于y轴;开始于x轴。例如金属与酸反应的图像,如果横坐标是时间,纵坐标是氢气质量,当金属表面有氧化物薄膜时,可能起点不在原点(因为开始时是氧化物薄膜与酸反应,不产生氢气)。 - 关注终点:终点可分为接近某个值或等于某个值,这表示反应结束时氢气的产量。 - 关注变化趋势:可分为变大、变小、不变型。例如随着反应进行氢气质量不断增加,就是变大趋势;如果是反应中有催化剂参与影响反应速率,而不影响氢气最终产量,图像斜率会变化(反应速率变化)但氢气量最终不变。 - 当两条或两条以上的曲线在同一坐标系中表示时,要注意数值大小关系,揭示其变化趋势,然后对比分析,找出符合题意的曲线或结论或解题所需的信息。 <a href="/?from=ask_words" style="color:red" target="_blank">点击前往免费阅读更多精彩小说</a>

1 answer
2026-09-06 19:01

Why are there bubbles in the reaction of metal oxide-acid?

Under normal circumstances, the reaction of metal oxide-acid would not produce bubbles. The general formula for the reaction of metal oxide-acid was: metal oxide-acid → salt + water (metathesis reaction). For example, the reaction between ClCl2 and CuO: CuO+2Cl2 = CuCl2 + H2O, the phenomenon is that the solid gradually melts, and the solution turns from colorless to blue; the reaction between Cl2 and Fe2O2: Fe2O2 + 6Cl2 = 2FeCl2 + 3H2O, the phenomenon is that the solid gradually melts, and the solution turns from colorless to yellow. If bubbles were produced during the reaction between the metal dioxide and the acid, it might be due to the presence of other impurities (such as metal elements) on the surface of the metal dioxide. The impurities reacted with the acid to produce gas. For example, the reaction between a metal and an acid would produce hydrogen (the general formula was: metal + acid → salt + hydrogen, such as FeCl2 +H ^). <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>

1 answer
2026-09-19 14:41

Reaction Formula of Metal Oxides and Dilute Sulfuric Acid

金属氧化物和稀硫酸反应会生成水和金属硫酸盐。例如: 1. 氧化镁与稀硫酸反应:\(MgO + H_{2}SO_{4} = MgSO_{4}+H_{2}O\)。 2. 氧化铁与稀硫酸反应:\(Fe_{2}O_{3}+3H_{2}SO_{4}=Fe_{2}(SO_{4})_{3}+3H_{2}O\)。 <a href="/?from=ask_words" style="color:red" target="_blank">点击前往免费阅读更多精彩小说</a>

1 answer
2026-07-01 15:33

Reaction equation and phenomenon explanation of acid and active metal

The general formula for the reaction between acid and active metal was: acid + active metal = salt + hydrogen. The common reaction equations are: Mn +2HQ = Mn Mn From the reaction phenomenon, active metals would produce hydrogen bubbles when they reacted with acid. This was because the active metal atoms lost electrons during the reaction, and the hydrogen ions gained electrons and became hydrogen molecules that escaped the solution. The intensity of the reaction was related to the mobility of the metal. Under the same conditions, the stronger the mobility of the metal, the more intense the reaction with the acid. For example, the reaction between acid and titanium was more intense than the reaction between iron and acid because titanium was more mobile than iron. At the same time, the reaction required the metal to be more active than H. However, K, Ca, and Na were too active. When mixed with the acid solution, they first reacted with water to form base and hydrogen before reacting with the acid. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>

1 answer
2026-09-25 01:53

What kind of acid and what kind of acid and what kind of acid are formed by the reaction of acid and metal oxygen?

The acid reacted with the metal to form salt and water. For example, the reaction of iron dioxide and diluted sulfuric acid produces iron dioxide and water (Fe2 O2 +3H2 SO2 = Fe2 (SO2)+3H2 O), and the reaction of copper dioxide and diluted sulfuric acid produces copper chlorideand water (CuO+2HQ = CuCl2 + H2 O). <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>

1 answer
2026-11-10 08:59
a
b
c
d
e
f
g
h
i
j
k
l
m
n
o
p
q
r
s
t
u
v
w
x
y
z