The correct way to use light bran
1. Use in rubbing bait: 10 - 50% light bran can be added to greatly reduce the proportion of the bait, reduce the stickiness, increase the fogging, and improve the state of the bait. For example, adding 30% light bran to the bait of silver carp and bighead carp could reduce the proportion of the bait and strengthen the effect of fogging to attract fish; when the bait was too sticky, you could open the bait and add an appropriate amount of light bran to reduce the stickiness. The more the amount added, the better the effect of breaking the stickiness; adding 10 - 30% light bran to the bait of sea fishing rod could make it easier for the fish to suck the hook into the mouth. 2. Use in bait pulling: Adding 20 - 30% light bran can effectively fill the gap of the bait while reducing the specific gravity of the bait, making the bait bigger, more fluffy and more porcelain. For example, adding 30% light bran and silk powder (it is recommended to use silk powder) to the small yellow flour or grain powder can make the bait ball bigger and more porcelain, which can be used to fish carp. 3. Use in nest feed or loose cannon: Adding 20 - 40% light bran can increase the fog of the bait and quickly attract fish. For example, when snatching fish in the black pit, adding 20% light bran to the cannon could greatly improve the fogging effect of the bait after entering the water and improve the fish luring performance. 4. Use when making soft sticky dough bait core: Take a portion of small yellow flour, one-fifth of state powder and light bran into the bait basin, add a little Sanyou rice appropriately and mix evenly, gently sprinkle a layer of sticky powder on the bait (the smoother the mouth, the more), then add appropriate amount of water (bait-water ratio of about 1:0.6), stir evenly and then clump together, adjust the state of the bait according to the hand feeling. If it feels hard, add a little water. If the stickiness is not enough, add sticky powder. If it is too sticky, add light bran to break the stickiness. Repeat the operation until it reaches a satisfactory stickiness (it feels like a person's ears). 5. Use when dealing with different fish situations: - Weak Mouth Fish (Light Mouth Fish): This type of fish eats with small movements and small floaters. If the bait is too heavy, it is difficult to suck it into the mouth. Light bran can be added to change the state of the bait, enhance the palatable taste, reduce the specific gravity, facilitate the fish to suck, and make the float appear larger. - Old slippery fish: The old slippery fish has a strong mouth and will repeatedly swallow and spit bait when eating. Light bran was added to the bait to change the specific gravity and palatable taste, so that the bait could be sucked into the mouth with a light suction, and it was not easy to spit out the hook, thus increasing the rate of fish being caught. - Black pits with sauce layer: The fish cannot find the bait because the bait is too heavy and will easily sink into the sauce layer. Adding light bran can reduce the proportion of the bait and avoid sinking into the sauce layer. "Snow Kisses All Over Dusk" was equally exciting. Everyone was welcome to click and read it!
Short, Light, Free
The correct way to use the bleacher
The correct way to use the bleacher was as follows: First, wear an apron, a mask, and gloves before using it to protect your hands. Secondly, according to the instructions on the product packaging, dilute the bleacher before using it. Then, the fabric to be washed was soaked in diluted rinsing water for a period of time, usually 45 minutes. Finally, it was washed according to the conventional method. When using the bleacher, one also needed to pay attention to details such as the ratio of the diluted solution and good ventilation.
The correct way to use the bleachers
The correct way to use bleachers includes the following points: First, before using bleachers, protective measures should be taken, such as wearing an apron, a mask, and gloves to protect your hands. Secondly, according to the instructions on the product packaging, dilute the whiteness before using it. After that, the fabric that needed to be washed could be soaked in the diluted rinsing water for a period of time. Finally, wash or wipe the clothes or area as needed, and rinse the clothes or clean area with clean water. These steps can help you use the bleachers correctly.
The correct way to use bleaches is
The correct way to use the bleacher was to wear an apron, a mask, and gloves to protect your hands. Then, he diluted the bleacher according to the instructions on the product packaging before using it. The fabric to be washed was soaked in diluted rinsing water for a period of time, usually 45 minutes. Finally, he washed his clothes in the usual way. Note that the bleacher is only suitable for white clothes, not for flowery clothes.
The correct way to use the bleachers
The correct way to use the bleacher was as follows: First, before using the bleacher, you should wear an apron, a mask, and gloves to protect your hands. Secondly, according to the instructions on the product packaging, dilute the bleacher before using it. Then, the fabric that needed to be washed was soaked in diluted bleachers for about 45 minutes. Next, he washed it according to the usual method. When using the bleacher, pay attention to choosing the appropriate bleacher, read the instructions and warnings, choose the appropriate dilute ratio, wear gloves and goggles, and ensure a well-vented environment. In addition, bleaches may affect the color of certain items, so they should be tested in an inconspicuous place before use. In short, the correct use of bleacher can help remove stains and disinfect items, but you must be careful when using it, follow the product instructions, and ensure safe use.
The correct way to use bleachers
The correct way to use the bleachers included the following steps: 1. Dilute: The bleachers cannot be used directly. They need to be diluted. Generally speaking, adding 1 part of the rinsing water to 9 parts of the water would achieve the appropriate concentration. 2. " ventilation: When using the bleachers, be sure to keep the room well-vented to avoid the pungent smell. 3. Wear protection: When using the bleachers, you need to wear gloves, masks, goggles, and other protective equipment to avoid contact with the skin or inhaling gas. 4. [To avoid mixing: Bleach cannot be mixed with other cleaners, or it may produce harmful gases.] 5. Clean it up: After using the bleachers, be sure to clean it thoroughly to avoid any danger caused by the residual bleachers. The specific usage method may vary according to different brands of whiteness, so it is best to refer to the instructions on the product packaging before using it. In addition, you should pay attention to your own safety when using the bleachers, avoid contact with your eyes and skin, and maintain a good ventilation environment.
The correct way to use the bleacher
The correct way to use the bleacher was as follows: First, wear an apron, a mask, and gloves before using it to protect your hands. Secondly, according to the instructions on the product packaging, dilute the bleacher before using it. Then, the fabric to be washed was soaked in diluted rinsing water for a period of time, which usually took about 45 minutes. Finally, it was washed according to the conventional method. It should be noted that the bleacher is corrosive and irritating. It should be carefully protected when used to avoid contact with the skin and mucus membranes. At the same time, the storage time of the bleacher was limited, usually 30 minutes. After use, it had to be thoroughly washed to avoid any danger caused by residue.
The correct way to use laundry beads
The correct way to use the laundry beads was to take the laundry beads out of the packaging and put them into the washing machine's shampoo box. Choose a suitable laundry procedure based on the material of the clothes and the degree of stains. The laundry beads did not need to be dissolved in water in advance. They could be directly placed in the laundry liquid box. The outer membrane of the laundry beads dissolved in water and was convenient to use. There was no need to cut or tear it open. Each time he washed clothes, he only needed to use one laundry bead, and the amount was reasonable. The laundry beads had strong cleaning power, could remove a variety of stubborn stains, and had a long fragrance. Using the laundry beads could simplify the washing process and improve the washing effect.
The correct way to use the rinsing liquid
The correct way to use the rinsing liquid was to add the rinsing liquid into half a basin of water, mix it well, soak the white clothes for 30 minutes, and then rinse them clean. If there are still stains on the clothes that have not been removed, you can add more rinsing solution to continue soaking, but the total soaking time should not exceed 6 hours. The rinsing liquid was suitable for pure white cotton, hemp, pet, polyester-cotton, cotton-linen fabrics, but not suitable for clothes that could not be rinsed by chloride-based bleachers, such as silk, wool, asphalt, and nylon-based fabrics. The rinsing liquid could remove certain protein and special stains, such as blood, sweat, dye juice, tea juice, and coffee.
The correct way to use laundry beads
The correct way to use the laundry beads was to take the laundry beads out of the packaging and put them into the washing machine's shampoo box. Choose a suitable laundry procedure based on the material of the clothes and the degree of stains. The laundry beads did not need to be dissolved in water in advance. They could be directly placed in the laundry liquid box. The outer membrane of the laundry beads dissolved in water, so there was no need to peel or tear it. The amount of laundry beads used depended on the brand and the number of grams. Generally, one laundry bead could clean 6-18 pieces of clothing. After using the laundry beads, pay attention to keep them dry and avoid being exposed to sunlight or high temperature environments. If the laundry beads became damp, they could be placed in a well-vented place to dry naturally. He also needed to pay attention to the replacement of the laundry beads.
The correct way to use seaweed essence
Seaweed essence is a natural plant growth regulator. The correct way to use it is as follows: 1. ** Range of application **: It is suitable for crops, flowers, fruits and vegetables, and other plants. It can be widely used in farmland production and home gardens. It can promote growth, improve resistance, and enhance root growth. 2. ** Usage * - ** Diluted Concentration **: Dilute it first. The concentration is generally controlled between 0.1% - 0.3%. It can be adjusted according to different plant species and growth stages. - ** Spray time **: Spray in the morning or evening to avoid high temperature periods to reduce the amount of evaporate in the sun to ensure full effect. - ** Spray method **: Spray the solution evenly on the leaves, stems, and roots of the plant, so that all parts of the plant can come into contact with it, so as to fully play its growth promotion and resistance. - ** Spray frequency **: It depends on the growth stage and needs of the plant. Generally, it should be sprayed once every 10 - 15 days. The number of spraying times can be appropriately increased during the vigorous growth period of the plant or when it encounters adverse environmental conditions. - ** Other usage methods **: It can be applied by rinsing, 300 - 500 grams per mu each time, or dipped in roots or seeds. It could also be used to irrigate the roots. A bucket of water used about 20 grams of water. After it was prepared, it was sprayed on the roots.