Single-lens reflex photography of flower parameters
When shooting flowers with a DSLR, you can refer to the following parameters: 1. ** Shooting Mode **: - Aperture priority exposure mode (Av mode) or M mode. - For close-up shots of flowers, the aperture priority mode can be set to the maximum or one to two degrees lower than the maximum (such as F2.8 or F3.5). - When shooting still life, flowers, fish, and insects (A), the aperture should be F5.6 or above and as large as possible. 2. ** Metering Mode **: Spot Metering. 3. ** Focus Mode **: - It can be set to single shot autofocus mode or autofocus (AF.) - When shooting close-ups of flowers, focus on the stamen to measure the light and focus. 4. ** Aperture **: - It depends on the effect you want to create. If you want a shallow depth of field effect (background blurring), you can set a larger aperture value, such as F2.8. If you want to shoot a large flower and need enough depth of field, you can reduce the aperture (increase the aperture value) appropriately, such as the aperture of 8 or above and 18 or below. However, you must pay attention to avoid the aperture being too small and causing noise to affect the image quality. 5. ** Light sensitivity (USB): - When the light was strong, the setting was set to 100, and when the light was weak, the setting should be within 400 and not exceed 800. - If you shoot in the studio, when the light is strong, the sensitivity should not be too high. You can lower the IQ. 6. ** White Balance **: Can be set to automatic white balance. 7. ** focal length **: Focus on telephoto, supplemented by other focal lengths. If the lens is pulled to the 55 telephoto end, the object can be shot closer to make the picture full. It can also be equipped with a macro lens (such as 100 micro) to shoot macro flowers. 8. ** Shooting Time **: - Usually, the light was soft from 6 to 10 in the morning, suitable for shooting. The lotus flowers and other flowers were blooming at this time. - Filmed in the afternoon before sunset, the spectrum was better, and the results were good. Read more exciting novels for free
Single lens reflex lens parameters
The angle of view of the medium focal length lens was between 40 degrees and 18 degrees, and the focal length range was between 61mm and 135 mm. The angle of view of a standard/medium-focus lens was about 40 - 55 degrees. In terms of optical characteristics, the photos taken at this focal length had the least distortion and could accurately reflect the shape of the subject. It was also relatively easy to design a large aperture. Different models of medium-focal lenses had different performance parameters in terms of distortion, dispersion, resolution, contrast, and so on. For example, the Olympus OM Zuiko auto-macro 90mm f/2.0 lens had an actual focal length of 90.44mm, an aperture of f/2.04, a pincushion-shaped distortion of 0.47%, and an edge loss of 0.3 stops at f/5.6. Minolta MC Rokkor -85mm f/1.7 lens, the actual test focal length was 85.6mm, with 0.5% barrel distortion, etc. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
The parameters of a single-lens reflex camera
The following are some important settings for a DSLR camera: 1. ** Shooting Mode **: It is recommended to choose the manual mode (M). This way, you can control the shutter, aperture, sensitivity, and other parameters independently. 2. ** Video recording format and size **: If there are no special requirements, you can choose to record 1920*1080, 25 frames, MOV format of high-definition video. If there are special requirements for zooming in, you can choose 4K or other format. 3. ** Shutter Speed **: Generally, it is twice the frame rate of the video. For example, when the frame rate is 25 frames, the shutter speed is set to 50; when the frame rate is 60 frames, the shutter speed is set to 120. This way, the visual effect can be achieved. 4. ** Aperture **: The aperture size affects the depth of field of the picture. A large aperture (such as F2.8) made the picture brighter and the background blur stronger, while a small aperture (such as F11) made the picture darker and the background blur weaker. The larger the aperture value, the smaller the actual aperture. 5. ** Light sensitivity (USB)**: When there is sufficient light, the lower the USB, the better. It is not advisable to set it too high in a dark environment, otherwise it will produce noise. For example, Canon DSLR can be set to 100 during the day and 800 - 1000 at night. A high USB (greater than 2000) will produce obvious noise and it will be difficult to repair later. 6. ** Color temperature (white balance)**: adjust to manual mode. Generally, it is recommended to adjust the color temperature between 4900 and 5300. The higher the color temperature, the more yellow the screen will be, and the lower the color temperature, the more blue the screen will be. 7. ** Focus **: If you have good manual operation ability, you can try to manually focus and select the focus point. Novice or for convenience, you can use the automatic intelligent autofocus. However, it is recommended to practice manual focus more if possible. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Single lens reflex and its parameters
The following are some of the parameters and related points that affect the DSLR film output: ###1. White Balance 1. ** Dark Blue ** - When the ambient light was different, the white balance needed to be adjusted according to the ambient light. It was generally set between 4000K and 5000K of CT color temperature. When the ambient light was warm, the photo taken would not be blue. 2. ** White balance in adjustment of other hue related parameters ** - The white balance could be adjusted according to personal style in the color adjustment of quiet gray tone, rich warm tone, bleached tone, low saturated natural tone, net red premium blue, warm tone, daily film, etc. ###2. Compensation for exposure 1. ** Tranquil Gray ** - You can adjust the exposure compensation according to your personal style. It is recommended to lower it a little. Generally, the value is between-0.3 and-1.0. 2. ** Rich and warm colors ** - Adding exposure compensation could make the photos look fresh, while lowering exposure compensation would make the photos look more intense. 3. ** Bleached Color ** - You can adjust the exposure compensation and white balance according to your personal style, and you can switch between light and dark. 4. ** Low Saturation Natural Tune ** - Adding exposure compensation could produce a fresh feeling, while lowering exposure compensation would produce a gentle tone. 5. ** Internet Celebrity Advanced Blue ** - You can adjust the exposure compensation and white balance according to your personal style. In addition, the image settings can be found in the menu (MENU)-(image settings). 6. ** Warm Colors ** - You can adjust the exposure compensation and white balance according to your personal style. When shooting portraits and skins, it is recommended that the exposure compensation is +0.7. 7. ** Black and White Film ** - According to the surrounding light, adjust the appropriate exposure compensation, and the 25600-degree exposure can create a strong black-and-white film effect. The exposure can be adjusted according to personal style. 8. ** Daily Film ** - You can adjust the exposure compensation and white balance according to your personal style. Increasing the exposure compensation can give you a refreshing feeling. In addition to the above parameters, the composition principle also had an important impact on the film: 1. In the case of non-special composition requirements, it is necessary to pay attention to the object in the photo to keep it vertical to the horizon, and the horizontal line to keep parallel to the horizon. 2. Other than the subject, try not to have other front or back scenes that attract the viewer's attention. For beginners, they could appreciate photography works on photography websites such as Netease photography, Hummingbird, Tugu, and China National Geography. They could learn to imitate the composition and reasonable exposure parameters in the works to improve the quality of the DSLR film. At the same time, he had to be clear about the effect he wanted, understand the meaning of the author's composition, the lighting environment, the angle of the light, and other factors. This would help to set the appropriate parameters during the shooting. In addition, in food photography, shooting angles such as 0 degrees (head-up), 45 degrees, 90 degrees (overlooking), etc. would also affect the effect of the film. Different angles had their own suitable scenes and composition matching methods. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Single-lens reflex photography
There were a few things to pay attention to when doing a Hong Kong style single-lens reflex photography: 1. ** Understand the characteristics of Hong Kong style **: Hong Kong style photos are usually rich in color, thick filter, strong contrast, and yellowish highlights. You also have to consider the character's expression, eyes, composition, and the story expressed in the photo. 2. ** In terms of composition **: Choose a suitable composition method, composition is the basic element of shooting. 3. ** Color environment **: The Hong Kong retro style requires a high level of color and lighting. You can add more red to enhance the retro feel and try to make the picture more colorful. 4. ** Light Usage **: - When the contrast between light and shadow was strong, use side backlighting to increase the sense of penetration. The use of light scattering would make the color tone of the photo soft. - You can use street lamps as the ambience light, or you can use light sticks to create a special color tone (such as green). You can also set up a 40-Watt COB light about two meters in front of the character. - Try to shoot the face facing the light as much as possible. This way, it would be easier to capture the light in the eyes of the character and improve the overall expression of the picture. 5. [Blur the background]: You can blur the background and focus on the character to highlight the character's personality and achieve the theme of the photo. 6. ** Use of props **: You can use old TV sets, posters of Miss Hong Kong's beauty pageant, iron wire beds, old picture frames, sunglasses, mirrors, Victoria lamps, flannel sofas, bamboo fences, cheongsams, fans, pearl earrings, radio, tape, roses and other props to add to the atmosphere of Hong Kong. 7. ** Character Make-up and Styling **: - In terms of makeup, women's exquisite sword-shaped eyebrows and iconic "fiery red lips" were more representative. Their makeup did not need to be too white, and their eyebrows could refer to wild eyebrows. Men did not pay much attention to their makeup, but their hairstyles were "30 - 70" or "back hair". - In terms of hairstyle, women could comb their hair into braids, tie up their hair in full curls, or push their hair to one side as much as possible. If the hair was not thick enough, women could use wigs or wig patches. - In terms of clothing matching, one could refer to the previous outfits of Hong Kong and Taiwan actresses, such as white T-shirts with wide-legged pants or halter skirts, or choose bright red dresses to capture the intellectual and mature femininity, etc. Men could choose shirts, jeans, sweaters, and other items. 8. ** Picture Effect Creation **: - It was a common effect for many Hong Kong-style portraits to make the image appear hazy and blurry. It could be achieved by putting stockings on the lens, applying some vaseline lipstick or transparent sunblock. - It could capture close-ups of parts such as eyes, collarbones, hands, lips, etc., making the character more comfortable and relaxed. The effect was advanced and beautiful. 9. ** Position Selection **: - Only the side of the character's body was shot. With his hands on his shoulders and his head raised, his eyes naturally looked at the camera. Through his eyes, he could express his emotions, haggardness, intellectual charm, and so on. - He could also sit sideways at the intersection of the two colors, with his hands on the ground behind him and his legs bent, or he could sit on the patterned fabric sofa with a book in his arms. 10. ** Use of filter **: If you really don't have a suitable scene or prop, you can also use a yellow filter to show the Hong Kong style. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Single lens reflex photography
If it was about DSLR photography, the following were some of the key points for DSLR photography: ** 1. Selection of shooting mode ** 1. ** Portrait Shooting ** - **A (Aperture priority mode)**: suitable for portrait shooting. In this mode, the aperture size could be adjusted manually. A large aperture (such as f/1.8, f/2.8, etc.) could make the background blur, highlight the main body of the character, and obtain a natural blurring effect. It could also increase the amount of light in the case of insufficient light. - **M file (full manual mode)**: Can be used for portrait photography. The photographer had to manually set the sensitivity, aperture, shutter speed, white balance, exposure compensation, focus, color temperature, and other parameters. This mode was suitable for taking portraits under complex lighting conditions, such as indoor lighting or scenes that used specific lighting to create a special atmosphere. 2. ** Shooting of moving objects ** - **S (Shutter priority mode)**: Adjusts the shutter speed. The faster the shutter speed, the more it can freeze the instant image of a moving object. It is suitable for capturing people, animals, or sports events in motion. 3. ** Scenery Shooting ** - **M (Full Manual Mode)**: It is very useful when shooting scenes such as sunrise, sunset, night scene, sea of clouds, starry sky, etc. For landscape photography, you can manually adjust the sensitivity, aperture, shutter speed, and other parameters according to the desired effect. For example, when shooting the starry sky, high sensitivity, large aperture, and slow shutter speed were needed (generally, a tripod was needed to keep the camera stable); when shooting sunrise and sunset, the parameters had to be adjusted according to the light intensity and the desired color effect. ** 2. Shooting Points ** 1. ** In terms of composition ** - ** Find a unique subject **: Choose a good-looking or oddly-shaped subject. This kind of subject will be easily remembered by the audience. - ** Use geometric composition **: For example, a triangular composition can make the picture full of geometric beauty. When shooting a picture that contained multiple elements, the elements could be arranged and combined to form a triangle to increase the stability and beauty of the picture. 2. ** Focus ** - Portrait and animal photography: If you are shooting portraits or animals, pay attention to the light in your eyes. This will make the subject more vivid. For animal photography, you can use methods such as feeding to get the animal to cooperate so that the eyes of the subject have a bright reflection. 3. ** Picture level ** - When shooting a scene, you can increase the layering of the picture by changing the angle of view. For example, lowering the angle of view, using the front and back arrangement of the characters or the changes in reality to create a sense of hierarchy. ** 3. Later adjustments ** Most of the photos taken by the DSLR camera were original photos. They couldn't completely restore the scenery seen by the human eye, so they needed to be retouched later. He could use the phone APP to adjust the light, shadow, contrast, saturation, atmosphere, color temperature, clarity, and other parameters of the photo to adjust the photo to his liking. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Single lens reflex camera parameters tutorial
The following is a tutorial on setting the parameters of the DSLR camera in different shooting scenes: ** 1. Portrait Shooting ** 1. ** Still Portrait ** - ** Shooting mode **: Aperture priority mode (LV) can be used. - ** Aperture Setting **: Use a large aperture, such as F2.8, to create a blurred background effect and highlight the main character. - ** Focus **: Focus on the eyes or key parts of the character. If you want to shoot a close-up of the character, the sharpness is moderate, and you can use the middle composition. When matching the character and the background, you can use the medium aperture F8 to highlight the character and the background. The focal length is the widest. The composition uses the three-point method or the golden section method. - ** Light sensitivity (USB)**: Try to set it as low as possible, such as USB 100. 2. ** When the character moves ** - ** Shooting Mode **: Shutter priority mode (TV). - ** Shutter Speed **: Usually set to about 1/250s to avoid blurring. ** 2. Scenery Shooting ** 1. ** Shooting Mode **: You can use P or M files. 2. ** Aperture setting **: Use a small aperture, generally F5.6 or smaller, such as F8 (on sunny days, around 100, F8, 1/200; on cloudy days, around 400). 3. ** Using the camera ** - ** Wide-angle lens **: It is suitable for taking photos of large scenes, such as buildings and landscapes. It has a short focal length, wide angle of view, and deep field of view, which can produce a strong visual impact. - Medium focus lens: It has the smallest distortion in the photo, can accurately reflect the shape of the subject, and is easy to design into a large aperture. - ** Telephoto lens **: Long focal length, small angle of view, large image on the film, suitable for shooting distant objects. 4. ** Composing **: To avoid placing the most attractive scenery in the middle, you can use the three-point composition, frame composition, symmetrical composition, diagonal composition, white space composition, etc. 5. ** Note **: It is recommended to bring a tripod to prevent the photo from blurring due to shaking. ** 3. Shoot flowers and plants ** 1. ** Shooting Mode **: Aperture priority mode (LV). 2. Aperture setting: Choose a large aperture lens or a 100-millimeter lens. The aperture should be large so that the depth of field is shallow and the subject can be highlighted. 3. ** Composing **: Use a central composition or a nine-square composition to place the object you want to shoot in the center of the picture. ** 4. Pet Shooting ** 1. ** Shooting Mode **: You can turn on the P automatic gear and start continuous shooting, or use the shutter priority mode (TV). 2. ** Shutter speed (in TV mode)**: Set it to 1/200s or higher. ** 5. Shooting Night Scenery ** 1. ** Shooting Mode **: Aperture priority mode or M mode can be used. 2. ** Aperture setting **: Use a small aperture, such as F10 or smaller. 3. ** Light sensitivity (USB)**: Normally set to USB 100. 4. ** Shutter Speed **: For example, 1/30s (Shutter 1/30, Aperture F10, SPD 100). 5. ** Metering Mode **: Can be set to the Evaluation Metering Mode (Matrix Metering Mode), and the exposure compensation can be reduced appropriately. 6. ** Ancestors **: Requires a tripod. If possible, you can use the shutter release to shoot. ** 6. Silhouette Shooting ** 1. ** Shooting Mode **: P-file is fine. 2. ** Metering **: Use spot photography to measure the highlight, then add or subtract the exposure according to actual needs, and place the focal point at the bright spot. ** 7. Setting the camera parameters for other shorthand scenes ** 1. ** Exterior Portrait **: 1/100s, Iso100, F1.2 - 2.8. 2. ** In-room portrait **: 1/80s, 1500, F2.8 or below. 3. ** Baby/Pet Shooting **: Above 1/200, USB 100 - 800, F1.4 - 5.6. 4. ** Still life/gourmet photography **: 1/80s- 1/200s, USB 100 - 400, F1.2 - 4. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Instantaneous parameters of a single-lens reflex camera
When shooting the jump moment with a single-lens reflex camera, you can refer to the following parameters: 1. ** Shutter Speed **: Set it to TV mode and set the shutter speed to above 1/200S. This way, you can clearly capture the moment when the character jumps up. 2. ** Iso-level: Set it to 100 when the light is good during the day. If it is dusk or when the light is not good, you can set it to automatic to ensure that the exposure of the picture is normal. However, an increase in the Iso-level will affect the quality of the picture. 3. ** Focus Mode **: Set it to continuous autofocus. When shooting, press the shutter button and focus on the person before the person jumps. When the person jumps, the camera will focus on the person continuously to prevent the photo from blurring due to the movement of the person. This method is also suitable for shooting moving objects. 4. ** Shooting Mode **: Set it to high-speed continuous shooting. This way, you can take multiple photos for later screening. In addition, when shooting jump shots, you can also use a low angle to show that the person jumping is higher; focus on the face or body of the subject, and use a high-speed shutter to ensure that the subject is clear, it is best to use single-point focus; You can also use a tripod and adjust it to the lowest position to assist in shooting. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Single lens reflex camera track parameters
When shooting a car track with a single-lens reflex camera, you can refer to the following parameters: - <strong></strong><strong></strong> - Shutter Speed: Not a fixed value, but depends on the traffic and speed of the car. In sections with more traffic and faster speeds, the exposure time could be shortened, such as 4 seconds to 8 seconds, while in sections with less traffic and slower speeds, the shutter speed often needed to be adjusted to 15 seconds to 30 seconds. When the shutter speed did not exceed 30 seconds, the user could choose manual exposure or shutter priority mode, and when the shutter speed exceeded 30 seconds, the user could only choose B to manually control the shutter speed (usually, the shutter release was needed to control the exposure time). - Aperture: If the shutter priority mode is used, the aperture will be automatically adjusted, but try to control the aperture to around F8 - F11. You can also choose the aperture of F8.0 in the Av mode. In addition, it could be adjusted according to the actual shooting effect. In addition, when taking pictures of the train tracks, one could choose the shutter priority mode or the manual exposure mode. If you use the manual exposure mode, you can also refer to the above shutter speed, aperture, and sensitivity parameters to adjust. At the same time, a tripod was needed to fix the camera position, and the shutter release also helped with the shooting. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Single-lens reflex parameters starry sky
When shooting stars with a DSLR, the following are some key parameters: - Aperture: Can be opened to the maximum, such as F2.8 or F4. - [Shutter Speed: Can be set to 20 seconds or 30 seconds.] - [Light sensitivity: This is the key to controlling the exposure. It can be adjusted from 1600 to 6400 depending on the light in the shooting environment.] In addition, shooting the starry sky also required the following attention: - In terms of equipment, he needed a good single-lens reflex camera with a good wide-angle lens. A tripod and shutter release were also essential. Because shooting the starry sky required a long exposure time, using a tripod and pressing the shutter with a shutter release could ensure that the photo would not be blurred. - The shooting location should be chosen to be unobstructed, with a wide field of vision and avoid light pollution. Only then would the photos be clean and beautiful. - In terms of composition, whether it was shooting the Milky Way or the orbit of the stars, there had to be a good composition. Close-up with buildings or trees would make the photo more perfect. If you were shooting the Milky Way, you had to set the USB to 1600 or higher, and you had to prepare a backup battery. When shooting the star orbit, don't expose it for a long time. It was essential to have objects in the background. When shooting, try to aim at the position of the North Star. This way, hundreds of photos could be taken to get a beautiful circular star orbit photo through post-synthesis technology. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Shooting indoor single-lens reflex parameters
The indoor DSLR shooting parameters were as follows: - Aperture: F1.2 - 4. - Shutter speed: 1/80s- 1/200s. - [Light sensitivity: 800 - 1500] <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>