How to catch the side spin ball with the backhand long glue
Take the right hand versus right hand as an example. Due to the unique properties of the long glue, it was often more difficult to control when receiving a left spin or left topspin serve than when receiving a backspin serve. Therefore, for the long glue play, when the opponent's left spin or left topspin serve was of high quality, the "side squeezing technique" could be used to restrain the opponent's spin to strengthen the control of the return serve. Read more exciting novels for free
How to catch a backhand side spin ball with a straight board
If the ball is spun to the right (from the perspective of the player receiving the serve, the ball that the opponent's backhand serves turns to the right after it hits our table), when rubbing the ball, in order to avoid side spin, you can tilt your hand a little to avoid the arc of the ball's side turn (i.e. the axis of rotation). It is better to rub the ball in a straight line direction of the opponent's backhand position. If you rub the ball diagonally, it is easy to go out of bounds. If it was a side topspin ball, he could choose to pick the ball and lift the ball forward with his wrist. There was no need to use a more passive method like chopping the ball. In addition, when receiving the backhand baseline right side spin ball, the normal forward racquet face should be slightly adjusted to rush to the opponent's backhand position. The thumb press is very important when receiving the side topspin ball. When starting, push forward from behind. When you feel that you can press down the arc, you must press down the arc. If it was a left-hand spin ball (from the perspective of the player receiving the ball, the opponent's right-handed racquet player would turn left after the right-hand spin ball landed on our table), the current reference did not mention the special turning direction of the left-hand spin ball in the backhand position, so it was impossible to answer accurately. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
How to catch a straight backhand side spin
If you are an amateur beginner who doesn't know how to hit and twist the straight board, you can try the following methods to catch the backhand topspin ball: - Pushing and blocking: Pushing in a straight line before the high point, but this requires sharp eyes and fast hands, otherwise the ball will easily catch up. - Backstage Lifting: Lifting the ball while it is falling. This method is not difficult, but you must pay attention to the landing point, otherwise it will be difficult to deal with the opponent's hand. - For a ball with a strong backhand rotation, you can use the force to pull the board, but it is more difficult to take the initiative to force friction. You can first practice using the rotation to push the ball, press the opponent's backhand, and then try to tear it after you have stabilized it. - When receiving the opponent's straight backhand shot, it was necessary to seize the rising period of the incoming ball, whether it was to defend the landing point or to lean forward to accelerate the quick tear. If you can catch the ball with a light push, you can increase your speed and change the landing point to prepare for a stalemate. If you want to use force to deal with it (violent tearing or pushing), the lead shot can't be too big, or it's easy to miss the rising period and cause the ball to go out of control. - The preparation posture for the return of the serve was also very important. He held his hand and bent his elbow in front of his chest. The head of the racket pointed vertically to the opponent and was slightly higher than the table. This could ensure that the ball would be fast and there would be space for the racket on both sides. At the same time, the range of the racket should be adjusted according to the speed of the ball. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
How to pull the backhand side spin ball
Here are some key points for pulling backhand side spin: - ** For the backspin and the ball out **: The backhand backspin is a more appropriate way to deal with the backspin and the ball out. - ** Landing point selection **: The better landing point is the opponent's backhand's baseline (big corner) and the center of the center of the center (this position is more difficult to control when receiving the ball). The chase ball is also good. - ** Movement **: - He had to be as sudden as possible and change the intensity of the rotation to prevent the opponent from adapting easily. - Pay attention to controlling your wrist the moment the ball leaves the racket to improve the stability and accuracy of the ball. - Controlling the landing point could be done by using the strength of the waist, such as facing the direction of the ball when receiving a diagonal ball. - It was not very suitable for pulling balls with strong forward momentum, because the movement of pulling the side spin was slow, and the ball was too fast for the top to cause a mistake due to insufficient friction time. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
The difference between a straight backhand side spin and a side spin
There were many differences between a backhand side spin and a side spin. 1. ** In terms of movement essentials ** - [Side Downspin]: Rubbing the ball when exerting force from top to bottom. After rubbing, the forearm wrist will hook up to make a feint. The point of contact with the ball was relatively high, and when the ball fell, the action was to spin down and then hook up. - [Side Topspin]: Do a feint without touching the ball from top to bottom, and then rub the ball to create a topspin when you hook up. When the ball falls to a lower position, lift it up with force. 2. ** In terms of the feeling of exerting force ** - ** Side Backspin **: When you swing the racket and touch the ball, you will deliberately feel the downward force, and then bring the racket up. - [Side topspin]: There is no deliberate downward force, but there is a deliberate upward and upward hook to create a side topspin. 3. ** The rebound performance of the ball ** - ** Side Downspin **: The ball will bounce down when it hits the rebound board. - ** Side topspin **: The ball will bounce up when it hits the rebound board. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
How to backhand right spin the ball
The basic movements of a backhand right hand spin were as follows: Before hitting the ball: - Position: Right foot slightly forward, body about 50 cm away from the table. - Lead the racket: naturally bend the arm and rotate it inward to make the racket face angle slightly backward. Raise the forearm and move to the front left side of the body to lead the racket to the front left side of the body. At the same time, hold the racket wrist horizontally to make abduction, and hold the racket wrist straight to make bending. - Receiving the ball: The arm will receive the ball from left to right. When hitting the ball: When the ball jumps to the high point or the early stage of the drop, the arm speeds up and swings from left to right. At the same time, the wrist of the racket is held horizontally as a retracting action, and the wrist of the racket is held straight as a stretching action. The racket face is tilted back to hit the middle and lower part of the ball and rubbed to the right. After hitting the ball, the arm will continue to swing to the right, front, and bottom, quickly returning to the preparation posture before hitting the ball. The main part of the force was the entire arm, and the wrist was coordinated. During the movement, the center of gravity of the body moved from the left foot to the right foot. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Penhold backhand serve, side backspin long ball
There were a few points to note when using a penhold backhand serve: 1. He turned his waist and pulled his arms back, creating space for force and friction to accumulate strength. 2. Rubbing the lower side of the ball and making good use of the elbow as a pivot point, if there was no elbow support, it would become a simple swing of the arm. The wrist was also an important part of increasing the rotation. 3. The whole action was similar to the backhand side spin serve. The moment the ball touched, the racket face was relatively flat, and the lower right side of the ball was close to the bottom to create a backspin. However, when the backspin was performed, the force was applied to the right side. The racket face was slightly steep (not completely horizontal) to create a right-hand spin. At the same time, the elbow joint should be raised to ensure that the racket could be placed sideways on the right side of the ball. The direction of the force of the action was lowered, and the backspin was created by sinking the ball. 4. When the ball is served long, the body should be about 30 to 40 centimeters away from the table. When the body touches the ball, the body should be slightly moved back and away. The ball should be served to the end line of our table. The power of cutting the ball down and forward will be more obvious. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Backhand Glue
The following are some of the routines for backhand long glue: - ** Attack pattern **: - ** Rash **: Rash can be used for no-spin balls or weak backspin balls that are the same height as the net. First, spin the forearm outward, with the backhand long rubber facing down, and then spin the forearm inward to hit the middle and upper part of the ball. At the moment of hitting the ball, the plate shape is slightly forward, and the tooth root friction ball is raised a little arc. After hitting the ball, the forearm is in a state of internal rotation, with the backhand long rubber facing up. - ** - ** Dealing with a long ball that doesn't spin **: The long rubber face first tilts forward and shines forward along with the movement. Depending on the ball's rotation, it will touch the upper or middle part of the ball. Then, the forearm will rotate inward. The surface of the ball will tilt forward to the bright board. The arc action will make the ball roll down the slope and pick up the ball. - ** Backhand position followed by forward rush, side squeeze and push **: The speed of returning the ball was only slightly slower than the incoming ball. - ** Backhand Short High Spinning High Hanging **: The racket head is knocked upwards (similar to the action of knocking the wooden fish), or the same racket hand shape is used to push the upper part of the ball to the left. The effect of the ball that is swept horizontally is similar to the effect of a high ball. - When the opponent retreated from the stage to attack the ball, the backhand sucked the short ball; when the opponent came up, the backhand dribbled the long ball; when the opponent attacked quickly, the backhand blocked the board to disrupt the rhythm. - When receiving the ball: If you can attack and pick up the ball, you will use the long rubber's good offensive ability to start playing in the first three boards. - ** Defensive Tactics **: - ** Receive the serve **: The horizontal board backhand long glue doesn't eat the serve. When you can't see the opponent's serve spin clearly, boldly use the long glue to receive it. The more the opponent turns the serve, the more the long glue can borrow the force to return the ball to the stage. If the serve doesn't turn, the long glue will also float and make it difficult for the opponent to attack. You can also learn Ito Misei's raw rubber receiving technique "side stab"(outer pocket turn, inner pocket turn). The racket touches the lower side or bottom of the ball, exerting force diagonally upward. The return ball has a side-down turn, and after landing on the platform, it turns to the side. The landing point can be in the opponent's forehand position or backhand position, which is conducive to the next hand reverse rubber attack. - ** Dealing with loop attacks **: When the opponent attacks with the loop ball, the backhand long glue will immediately reverse the spin and change from top to bottom, making it difficult for the opponent to continuously attack with the forward loop ball and can only pull the loop ball; the pulled loop ball will turn into a strong backspin ball with a long glue. If the quality of the pulled loop ball is not high, the player with the backhand long glue can score with his forehand sideways. - ** Dealing with the backspin ball **: If the long rubber ball is used as a cutting ball, the backspin can be used in a high-profile manner. Once the ball is high, it can be directly smashed. However, the high ball should not add too much friction to prevent it from falling into the net. When receiving a serve, you can push it all out. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
How do you catch a strong backhand right spin?
If the ball was backhanded to receive a strong right-hand spin, he could quickly step up and cut the left side of the ball. Pay attention to rubbing the ball and press down at the same time. In addition, when you receive the ball, you must control the landing point. When you receive the opponent's backhand position or middle position, you must use force. This way, it is not easy to get spun. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
What are the technical essentials of the horizontal backhand side spin?
The technical essentials of the horizontal board backhand side spin were as follows: 1. ** Racquet Grip and Racquet Lead **: The grip method must be stable. After the ball is thrown, the racquet should be led to the left and back through the waist (using the right hand as an example). When leading, the racquet face should be slightly tilted. 2. ** Racquet face angle **: When touching the ball, the racket face is basically maintained at about 80°. After touching the ball, the racket face is basically vertical to the ground. This can reduce the creation of backspin or topspin. 3. ** Power Method **: - He used his waist and hip to drive his arm to exert force, and his wrist remained relaxed when he hit the ball. - Using the elbow joint as a support to drive the entire arm to exert force, the direction of force was more from left to right (using the right hand as an example) to rub the ball, reducing the upward or downward force. - The waist and hip could move the arm to use the elbow joint as a pivot to rub horizontally. It could also pull the elbow horizontally to the left to lengthen the friction space. 4. ** Hit Point **: Try to hit the ball at the same height or slightly lower than the net. This will help control the arc. 5. ** Overall Movement **: The overall movement must be coordinated and must pay attention to the confusion of the movement. It can be used with the side up and side down serve. The threat of serving a long ball with a side spin is greater, and it is generally less likely to serve a short ball. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Galaxy Volcanic Rock 7 backhand with what glue
If it was the Galaxy Volcanic Rock 7 backhand glue, for defensive play, you could choose 729 Tianyi, Qiyuan, etc. You could also refer to the general backhand glue idea, which was to take into account the leverage and force, the transition ball and the opportunity ball, and the backspin and topspin ball. Don't choose too soft, so as to avoid easy spin, weak and unstable feeling. In addition, if the feel is not so delicate, you can also try the Speedy 3, but generally, those who pursue the feeling of eating the ball should not be equipped with the Speedy 3. You can also choose the internal rubber, such as the 729 blooming loop type. " The Legend of the Three Dragon Scales in the Milky Way Continent " is equally exciting. Everyone is welcome to click and read it!