How is the construction animation made?
Construction animation production could generally be divided into three parts: pre-production, animation clip production, and post-synthesis. Pre-production was the planning and design of the animation before production. As the content of the construction animation was highly professional, the construction process, building structure, and construction plan of the project had to be understood before production. Then, script planning and design, screenplay creation, scene design, and so on. The animation clip production was based on the pre-design, using engineering animation software (such as Lumenrt) to create animation clips in the computer. The process included modeling, materials, lighting, animation, camera control, rendering, and so on. Among them, the modeling was done through 3D modeling software.(For example, Revit, 3D Max, etc.) Create an accurate 3D model according to the design drawings or concept sketches provided by the customer. The material part is to give the model realistic materials and texture to simulate the surface texture of the building materials after the 3D model is completed. The lighting part affects the model effect by adjusting the lighting and other parameters. The animation part involves setting the dynamic effect of the model. The camera control is to adjust the shooting angle. Rendering was to adjust the shadow, reflection, refraction, and other parameters to make the image have a high degree of realism and visual impact. The post-production was mainly to use the previously produced animation clips, sounds, and other materials according to the design of the storyboard script, and then edit them through non-linear editing software to finally generate the construction animation. This process included editing and synthesizing the various animation clips, adjusting the color and lighting effects of the animation, dubbing and composing the animation, and finally, the production of the construction animation was sent to the client in a suitable format. Read more exciting novels for free
Tunnel construction animation
Tunnel construction animation was a branch of 3D animation. Its production could be divided into three parts: pre-production, animation clip production, and post-synthesis: 1. ** Pre-production **: This is the planning and design of the animation before it is produced. Because the content of the construction technology animation was highly professional, it was necessary to understand the tunnel construction technology and construction plan before production. Then, it was necessary to carry out the script planning and design, the screenplay creation, the scene design, and other preliminary planning and design work. 2. ** Animation clip production **: According to the preliminary design, use engineering animation software such as Lumenrt to produce animation clips. The production process includes a series of operations such as modeling, materials, lighting, animation, camera control, rendering, etc. 3. ** Post-production **: The animation clips, sounds, and other materials that were previously made will be edited by the non-linear editing software according to the design of the split-shot script. Finally, a complete tunnel construction animation will be generated. Tunnel construction methods mainly include drilling and blasting method, shield method, tunnelling machine method, and tunnel lining method. The excavation method is divided into open excavation method and underground excavation method. The open excavation method is mostly used for shallow-buried tunnels or urban railway tunnels, and the underground excavation method is mostly used for mountain railway tunnels. According to the size and position of the excavation section, there are partial excavation method and full-section excavation method. Different construction methods would be presented differently in the animation: 1. ** Drill Explosion Technique **: - ** Full-section excavation method **: Once the excavation is completed, it is usually done with a drill, followed by milli-second blasting, shotcrete-bolt support, and large-scale loading and transportation machinery and ventilation equipment. This method has evolved into the half-section method (the upper part of the arc is in the lead, and the lower part is constructed at a certain distance). - ** Divisional excavation method **: First, use small cross-section to excavate the pilot tunnel in advance, and then expand the pilot tunnel to half or full cross-section. This method can use light machinery to construct and open more working faces, but there are many processes, interference, and more people. According to the position of the heading pit in the tunnel cross-section, it was divided into the upper heading pit method, the central heading pit method, the lower heading pit method, and various methods that cooperated with the upper and lower heading pits. There was also the bench method that divided the entire cross-section into steps for excavation and the distance between each step was relatively short. 2. ** Shield Method **: suitable for soft ground. The shield was a circular steel structure excavation machine. The front end was a notch ring, the middle was a support ring, and the back end was a shield tail. During excavation, the cut ring cuts into the ground to cover the workers 'work. The support ring bears the load and is equipped with a jack and other machinery to push the shield. The shield follows the first two parts to protect the workers from installing the segments. 3. Tunnelling machine method: The entire tunnel section was constructed with a continuous tunnelling machine. The front end of the tunneler was a metal disc, which was driven by powerful rotation and propulsion. The disc was equipped with special knives to cut the stratum, and the surrounding buckets poured the gravel into the belt transporter to transport it out. There was a foldable support mechanism in the middle of the machine body. When cutting the stratum, it stretched out to support the rock wall to balance the moment and thrust. This method had less disturbance to the surrounding rock, accurate control of the cross-section, no over-excavation, fast speed, and fewer operators. 4. ** Tunnel Lining **: After the tunnel is excavated, in order to stabilize the surrounding rock and ensure the safety of operation, a layer of support structure with sufficient strength needs to be built according to a certain outline size. Commonly used lining types include in-place pouring concrete, pre-cast block assembly, shotcrete-anchor or single-shot concrete, and composite lining (after shotcrete-anchor or single-shot support, another layer of concrete is poured in place. In areas with water, a waterproof layer can be added between the two layers of support). <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Excavator, construction truck, construction team, video animation
Currently, there were a variety of video animations with the theme of the excavator construction team. For example, there was an animation with the Silk Road as the background, telling the story of Xiao Xin and his engineering vehicle partners forming a "super car fleet" to eliminate sandstorms. There was also an animation showing the exchange of snacks between engineering vehicles. There were also animations about the construction of houses on the island, such as concrete mixing trucks and pump trucks pouring concrete into the foundation of houses on the island. Most of these animations were aimed at enlightening the puzzle, helping children increase their knowledge and cultivate their creativity. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
pipe construction demonstration animation
Here are some animations related to pipeline construction: 1. 3D animation of pipe pushing construction: - Pipe-pushing construction was a common method of pipe construction without slotting in municipal public works. Two working pits were dug at both ends of the ground that needed to be crossed, and the pipeline was pushed from one end of the working pit to the other end, and the earth was transported away. In front of the pipe joint, there was a machine head (tool pipe), which was mainly used to excavate the soil before the pipe joint and prevent the soil before the pipe joint from collapsing. The pipe joint was composed of sections, and the lifting force of the pipe joint was provided by the jack at the back. The machine head was equipped with a cutter head to cut the soil mechanically. While cutting the soil, it pushed forward. The machine head cut the earth and transported it to the working pit through the pipe joint and lifted it out. When the machine head reached the receiving well, it could be lifted out. - According to the different excavation methods, the pipe pushing method is divided into mechanical excavation, squeezing, hydraulic mechanical excavation, and manual excavation. When manual jacking is used, after the steel pipe comes into contact with or cuts into the soil layer, it shall be excavated layer by layer from top to bottom, and the center and elevation deviation shall be measured during the jacking process. When the steel pipe enters the soil layer within 5m, it shall be measured at least once for every 0.3 m. After entering the soil layer 5m, it shall be measured once for every 1m. When correcting the deviation, the number of measurements shall be increased. When an open (hand-dug) pipe jack is used, the underground water level shall be lowered to not less than 0.5m below the bottom of the pipe, and measures shall be taken to prevent other water sources from entering the pipe of the pipe jack. No over-excavation shall be allowed within 135° below the pipe, and the over-excavation amount above the top of the pipe shall not be greater than 15mm. When the surrounding environment requires the control of stratum distortion or there is no rainwater condition, it is advisable to use a closed earth pressure balance or mud balance pipe jack for construction. 2. The animation of the pipeline construction in the first and second construction practice: For example, the 600 construction animations of Su Ting's first construction practice and the construction animation designed by Zhang Gong himself may include the content related to pipeline construction, such as the installation of mechanical and electrical pipeline. The 3D demonstration of the pipeline construction process and process details can restore the construction site at a 1:1 height, which can help to understand the principle of pipeline construction. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
An animation made in 2005
The animations released in 2005 included " Pigman's Magical Piggy Chronicle,"" Detective Weiwei Cat,"" Sky Eye,"" A Pig from the Sky,"" Pleasant Goat and Big Wolf,"" Go Boy," and " Oriental God Baby." These animated works covered a variety of topics, such as detective detective "Power Cat", fantasy "Eye of the Sky","A Pig from the Sky" with a traditional story as the background,"Pleasant Goat and Big Big Wolf" with interesting stories about animals,"Go Boy" with the theme of Go to spread traditional culture, and "Oriental God Baby" with mythical colors. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
How is the quality of cartoon construction animation?
Overall, the quality of cartoon construction animation depends on several factors. The skills of the animators, the budget, and the complexity of the design all play a role. Sometimes, simple animations can still be effective if they convey the intended message clearly.
Construction Vehicle Toy Animation: Volume 136
The 136th episode of " Engineering Car Toy Animation " was one of the multi-purpose toy car animations. This animation can bring joy to children, and it can also help to improve children's hearing, attention, and observation. It can also motivate children to develop their imagination, enhance their curiosity, and promote the development of the brain. The main actors were China actress Wang Jiajia and China male singer Zhou Mingshan. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
The animation made by Hiro
The reference mentioned an animation tutorial related to macro commands in Excel. One of them was an animation tutorial about recording the macro command. Take the macro with the title "Center Across Rows" as an example. The specific recording process was to execute the "Tools → macro → Record New macro" command, open the "Record New macro" dialog box, enter the name under "macro name", and set the location where the macro was saved.(The macro can be saved in the current workbooks, personal macro workbooks, and new workbooks.) Press the "OK" button to start recording. Then, perform the operation process of setting "Center Across Rows". After that, press the "Stop Recording" button on the "Stop Recording" tool bar. If the macro needs to operate on any cell, select the "Relatively Referential" button on the "Stop Recording" tool bar before the operation starts. There was also an animation tutorial for add-ins in Excel. It was to first save the add-in document to the corresponding folder, then execute the "Tools add-in" command, open the "add-in" dialog box, click the "browse" button, open the "browse" dialog box, select the macro that needed to be loaded, and then confirm to return. It also mentioned the system's own add-in and how to operate when the add-in folder could not be found. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Hand-made clay animation
Hand-made animation was a unique form of animation. It mainly produced dynamic effects by shooting hand-made clay figurines or clay scene objects frame by frame, and then continuously showing them. For example, Datong Fire Protection released the stop-motion animation " The sockets are on fire." The images were all made of handmade colored clay. This kind of animation was not easy to make. It often required hundreds of photos to be taken and dozens of cartoon images to be made of clay. An animation would take nearly a month to complete. There was also " Hilarious Color Clay Friends ", which was set in daily life. It was also a kind of color clay animation. Through the daily adventures and funny interactions of the main character, the green clay figurine, it depicted the happy life of the color clay friends. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
How many stories can be made with frame construction?
It really depends on your creativity and imagination. There's no set number. You could potentially come up with countless stories using this technique.
The host introduced the construction site and made an opening speech.
The following are some examples of opening remarks suitable for streamers to introduce construction sites: * * 1. Start from the overall atmosphere ** "Hello, everyone! Now we have arrived at a place full of vitality and hope--the construction site. Here, every day was a battle against time, technology, and the natural environment. Every corner was pregnant with new forces for urban development. From a barren land to the rise of high-rise buildings, the construction site is like a magical field. Today, follow me into this mysterious and charming construction world." * * 2. Mentioning the significance of construction ** "Hello, dear audience! We all know that the development of a city is like a never-ending relay race, and construction is a crucial part of it. Every construction site is the cornerstone of the city's construction. It is related to our living environment, quality of life, and even the future of the entire city. Today, standing on this construction site is like standing at the forefront of urban development. I will immediately unveil the mystery of construction site construction for everyone." * * 3. Starting from personal feelings ** "Hi, friends! When I stepped into this construction site, I was greeted by a sense of vitality. The roar of the machines and the busy figures of the workers here all made me feel a strong sense of shock. This was not a simple process of digging and building walls. It was a process of creation, a display of human wisdom and strength. Now, let me bring you into this hot construction site." <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>