How much wattage does a jewelry photography lamp need?
There were many types of lamps used in jewelry photography. For example, a 2K (2000W) tungsten lamp was used as the secondary light in a jewelry shooting. Finally, two 150W tungsten lamps and one 300W tungsten lamp were used to increase the highlight points from three different positions on the display. There were also 15 LED jewelry lamps with a power of 30W. There were also small lamps that could be used to shoot jewelry with 4.5W LED lamps. Different shooting scenes, lighting methods, and desired effects would determine the wattage required for jewelry photography. Read more exciting novels for free
Jewelry photography
Jewelry photography was known as jewelry photography. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Jewelry photography lighting
There were many ways to set up lighting for jewelry photography. The following were the common ones: ** 1. Single lamp lighting method ** - Usually, the camera was shot from a side angle. This angle was more suitable for shooting jewelry such as diamonds, because the side angle did not have to worry about the camera lens creating shadows. A single lamp could make the light and shadow more three-dimensional and more penetrative. ** 2. Double Light Illumination Method ** - It was shot with two sheets of paper and two lights. When shooting, pay attention to adjusting the angle and distance of the lights to control the change of light and shadow on the surface of the product, so as to achieve the desired effect. Moreover, he had to pay attention to the light ratio between the two lights and make sure that the primary and secondary lights were clear. ** Three-lamp lighting method (Surrounding lighting method)** - The product was completely surrounded from three angles, leaving only the position of the camera to enter the light. Then, the light distribution was adjusted in three directions around the camera to capture the desired effect. The main light, auxiliary light, and outline light would change according to the subject of the shoot. This method was more friendly to newbies. There were different considerations for the lighting of different materials: - ** Diffuse reflective material **: For example, ancient gold, ancient silver, ivory, rhinoceros horn and other decorative ornaments. The material feature is that the light projected on the rough surface will be reflected in all directions. A beam of light will hit the product and reflect aimlessly. This kind of material was relatively easy to shoot, as long as the product was bright. - ** Fully reflective material **: Mainly made of pure gold, platinum, gold, platinum, silver, alloy, other synthetic metals, and other rare metals. The reflective surface is smooth, and the light is reflected in parallel. When a beam of light shines on the product, the light will produce a directional reflection characteristic according to the principle that the angle of incidence is equal to the angle of reflection. - ** Refraction material **: Most of them are gemstones, such as diamonds, red sapphires, emeralds, jadeites, corals, pearls, amber and other natural rare species. Tourmaline, turquoise, amethyst, agate, lapis lazuli and other semi-precious stones. When light slanted from one transparent medium into another, the direction of transmission would generally change. When a beam of light hit a product, a portion of the light would be reflected by the mirror, and a portion of the light would brighten the internal material. When setting up the light, they would usually use tracing paper, black, white, gold, silver reflective plates, spotlights, soft light boxes, and other tools to meet the needs of different jewelry. For example, for diamond jewelry, if you want to shoot a bright effect, you can use the fill light method to make the brightness of different sides and the highlight of different edges. If you want to completely eliminate the reflection on the jewelry, you can use tent-type lighting. Set up a "tent" on the top and around the jewelry with seamless paper to cover the surroundings, the top, and the front (only a hole that can be inserted into the lens and the light). The "tent" is illuminated softly and indirectly to make the light uniform. For gold and silver jewelry, most of them used direct light to make their color shine, achieving a golden effect. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Jewelry photography method
Here are some ways to take photos of jewelry: 1. ** Selection of lens and equipment settings ** - ** Use of lens **: You can use a macro lens, such as the EF100mm f/2.8L Macro IS USM or the RF100mm f/2.8L Macro IS USM, which can capture the details of the jewelry and highlight the designer's creativity. - ** camera parameters **: to make more images focus, you can use a small aperture, such as f/22 for deep depth of field; the shutter speed is usually set to 1/100; the camera should be installed on a tripod to prevent hand shake from blurring the photos. For black gemstone images, you can use multiple light sources to create layering, and you can also use a mask to create striped lighting patterns on a lamp to increase its attractiveness. If you lack ideas when shooting, you can find inspiration from magazines or Social networks and try to copy the photos. At the same time, determine the position of the light source and the angle of the shot. 2. ** Reflective treatment ** - ** Control of the environment **: Since the surrounding light will affect the reflective surface and the color temperature of the jewelry, the studio should be kept dark and the degree of light reflection should be adjusted by controlling the lighting. - ** Reflecting Plate and Diffuser Usage **: White reflecting plate can reflect the light back to the jewelry and hide the surrounding objects; correct positioning of black or white reflecting plate can eliminate the reflection of flat gold jewelry; Diffuser can reduce the reflection of metal surface, and the position of the reflecting plate should be close enough to the subject to make the light softer. 3. ** Jewelry arrangement and composition ** - ** Clear focus **: When shooting jewelry, you need to be clear about the focus of the accessories, which will affect the appearance, mood, and composition of the image. - ** Backgrounds and props **: The background and props should be kept simple so that the lighting can best show the elegance of the jewelry. For color selection, you can consider the depth of the jewelry's color tone, choose complementary colors to create a harmonious appearance, or use cool colors to make the jewelry stand out. 4. ** Shooting Techniques ** - ** Choosing the shooting angle **: It is important to observe every corner of the jewelry before shooting. Different angles will make the diamonds look different. When drawing the lighting plan, you need to pay attention to each part of the jewelry. - ** Increase the image dimension **: Can take photos with reflections. The reflections can add luster to the accessories, making the picture more perfect and making the jewelry shine. - ** Model display (option)**: Arrange a model to display the jewelry on the body. This will help to show the jewelry's decorative effect to potential buyers and increase sales. - ** background selection **: You can use a background of the same color as the gem to make its color stand out. In addition to choosing a specific color to make the gem stand out, using a black background will help the image stand out and fully display the gem's color. If you take a photo of gold jewelry, choose a high-contrast color (such as red or blue background) to help highlight the gold color. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Jewelry photography artifact
Here are some tools that can be considered divine artifacts in jewelry photography: 1. ** macro lens **: You only need to add it to the phone, and the phone can make the product clearer when it is close to the product. You can also take a super close-up when the focal length is enlarged. 2. ** Love Jewelry Shooting Software **: This is a photo artifact specially used to take photos of jewelry. - ** Multi-functional **: It has functions such as one-click matting, smart shooting, color adjustment, filter, crayon, crop, reflection, and background change. One of them was based on AI intelligent algorithm technology, which could greatly improve the efficiency of matting. For complex pictures, a variety of tools could be used to correct the results; the dimming and toning function could refine and beautify jewelry products through tools such as highlight, brightness, saturation, etc. - ** Special Function **: There are a variety of professional jewelry filter, which are constantly adjusted and tested by professionals under various lighting. It provides real-time real-time jewelry filter and can easily handle various styles of photos. Its composite camera was powerful. It could shoot jewelry from multiple dimensions and angles. Through the composite function, it could synthesize multiple photos, display jewelry photos in a panoramic view, and solve the problem of blurring. In addition, it also provided 3D product display functions, which could seamlessly integrate products into the online exhibition hall. There were also nine-square display and WeChat sharing functions. It also supported online image uploading brand logo watermarks and multi-color, transparent base watermarks. 3. **NiSi Starlight Mirror **: When makeup, clothes, and makeup are ready, you can immediately have a more dreamy effect when you put on this Starlight Mirror. It also looks good in video mode. It could be adjusted from 4 to 8 stars. The aluminum frame was light, and the optical lens glass and double-sided reflective coating made the color reproduction very real. In addition to the fresh and girly theme, it was also suitable for ancient themed creations. 4. ** Photographic Equipment **: - ** Black acryl board, mirror, glass cup ** These were all good props for shooting jewelry. For example, putting a glass in the background and lighting it up could create a dreamlike effect. - ** Lightbox, Soft Light Box **: For example, 80cm studio mini LED folding products, photo lightbox, simple shooting light, soft light box, jewelry, LED round studio 80cm set still life studio, soft light studio photo lightbox, jewelry shooting equipment, LED studio 70* 70cm soft light box set with light, etc., can be used for jewelry shooting and other operations. - ** fill light *: For example, the 100W LED light for live-stream photography, COB professional photography, clothing, gourmet jewelry photography, LED fill light, and the 19-inch fill light from RitualMap can meet the lighting needs of jewelry photography. - ** Kelly photography wholesale black 60cm reflection plate photography equipment (double-sided super beautiful inverted studio jewelry shooting table)**: This is also equipment that can be used for jewelry shooting. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Jewelry photography recruitment
The following is some information related to jewelry photography: - Mengjinyuan Jewelry in Shen Zhen was looking for a jewelry photographer. The requirements were 1 - 3 years of work experience, a college degree, a salary of 8 - 16k, five insurances and one fund, meal allowance, and a large space for development. - An e-commerce company in Shenzhen-based was looking for a jewelry photographer with unlimited experience and a college degree. The salary was 14k-16k. - Hongsheng Technology is looking for a Little Red Book Jewelry Photographer (Shenzhen-Golden Rice Field). The requirements are 1 - 3 years of work experience, unlimited academic qualifications, salary of 6 - 11k, performance bonus, full attendance award, good leadership, great development space and other benefits. - Guangzhou Juaibo Jewelry Co., Ltd. is looking for a jewelry photographer (Guangzhou-Nanyuan). The requirements are 1 - 3 years of work experience, unlimited education, salary of 5 - 8k, five insurances and one fund, full attendance award, paid annual leave, meal allowance and other benefits. - Zhuhai City Defu Jewelry Co., Ltd. is looking for a jewelry photographer (ZhuHai-Nanping). 1 - 3 years of work experience, college degree, salary 6 - 8k. - Qichen Culture Media (Guangzhou) Co., Ltd. is looking for a jewelry photographer (Panyu District). The requirements are 1 - 3 years of work experience, college degree, salary of 6 - 12k, five insurances and one fund. - The company is looking for a jewelry photographer (Longgang District). The requirements are 1 - 3 years of work experience, unlimited academic qualifications, salary of 8 - 12k, five insurances and one fund, performance bonus, good leadership, flat management and other benefits. - Tasha Jewelry Investment Co., Ltd. is looking for a jewelry photographer (Shenzhen-Cuizhu). Experience is not limited, college degree, salary is 7 - 12k. - Guangzhou City Yuecui Jewelry Co., Ltd. is looking for a jewelry photographer (foshan). Experience is not limited, college degree, salary is 5k-8k. - Guangzhou City Suhang Trading Co., Ltd. is looking for a jewelry photographer (foshan). Experience is not limited, college degree, salary is 5 - 8k. - Supreme Gold (ShenZhen) Co., Ltd. is looking for a jewelry photographer with a salary of 7,000 - 8,000 yuan. The requirements are 1 - 3 years of work experience and a technical secondary school/technical secondary school degree. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Jewelry photography sensitivity
In jewelry photography, there were many choices for the sensitivity (IS) value. For example, in some shooting, the sensitivity can be set to 100. For example, when using common items at home as props to shoot jewelry, the sensitivity is 100 when the focal length is 60mm, the aperture is F18, and the shutter speed is 1/160s. When shooting the dial, the aperture is f/11.0, the shutter is 1/40s, the focal length is 100mm, the exposure compensation is-1.0, the white balance is automatic, and the light measurement mode is evaluating the light measurement. When shooting the watch chain, such as aperture is 5.6, the shutter is 1/250s, the focal length is 100mm, the exposure compensation is-1.0, and the white balance is automatic light measurement mode. When evaluating the light measurement, the sensitivity is also 100. However, there were also cases where the sensitivity was 1600. For example, when using the surrounding light distribution method, the focal length was 100mm, the aperture was F2.8, and the shutter speed was 1/125s, the sensitivity was 1600. Different sensitivity settings depended on the specific scene, requirements, and other photography parameters (such as aperture, shutter speed, etc.). <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Jewelry photography style
Jewelry photography styles can be reflected in the following aspects: ** 1. Close-up and details display style ** 1. ** Use of macro lens (suitable for camera photography)** - Special macro lens equipment was needed to clearly show the details of the jewelry. If the lighting and elements were arranged properly, the photo would have a more three-dimensional feel. - For mobile photography, you can use the external macro lens of the mobile phone to take close-up shots of the jewelry to show the details. 2. ** Using light to show details ** - Under natural light, specific time periods were more suitable, such as 9:00 a.m. to 11:00 p.m. in summer, and 3:30 p.m. to 5:30 p.m.(avoid sunset to avoid color distortion). - Using side light, such as the natural light coming in through the window as side light, casting shadows can make the main body have a three-dimensional natural appearance and better display color. You can also use lace curtains or shutters to diffuse natural light to make the photo look better. ** 2. Color highlights style ** 1. ** The background is the same color as the gemstone ** - Choosing a background that is the same color as the gemstone will make the gemstone's color stand out. 2. ** High-contrast background (for specific accessories)** - For gold jewelry, choose a color with high contrast (such as red, blue, etc.) as the background to help the gold stand out. The black background helped to show the full color of the gemstone and also made the image stand out. ** 3. Add Dimensional Styles ** - Take photos with reflections. The reflections add luster to the accessories in the image, making the picture look more flawless, making the jewelry shine and adding dimension to the image. ** 4. Wearing and displaying style ** - There were models to show how the jewelry would look on the body. The jewelry would make the portrait more beautiful, help to show potential buyers the decorative effect of the jewelry on the body, and increase the sales of jewelry. ** 5. Natural and simple style ** 1. ** Styling ** - He placed the accessories on the light wooden board. 2. ** Equipment selection ** - You can use any camera + standard zoom lens; if the subject is very small, you can try a macro lens, such as the ESF-M28mm f/3.5 Macro IS ATM, ESF-S35mm f/2.8 Macro IS ATM. 3. ** Lighting ** - Use the light from the window as a side light, use a white reflective board to prevent tripods and other objects from casting shadows on the subject, and adjust the brightness of the subject. He could also make white paper, cardboard, and other equipment to assist in the shooting. ** 6. Combination of panoramic and close-up style (for the example of shooting jade bracelet)** - First, he would take a panoramic shot, then a close-up shot. He also had to take a photo of the water in the jade bracelet. He could also take a photo from a low angle. In terms of shooting scenes, they could use the surrounding environment (such as bamboo) to match the shooting. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Polarizer for jewelry photography
In jewelry photography, the CPL Polarizer (Circular Polarizer) had a certain role. First of all, the CPL Polarizer could eliminate reflections. The surface of the jewelry may have reflections that affect the shooting effect. It could eliminate these reflections, allowing the jewelry to show its original clarity, texture, and color saturation in a bright environment. It could better show the details, color, and so on. Secondly, the CPL Polarizer could increase the color density, making the color of the jewelry more vivid and full, thereby improving the visual effect of the jewelry in the photo. However, if you want to shoot metallic highlights on jewelry or use reflections to create special effects (such as some glossy reflection effects on jewelry), it is not advisable to use a CPL microscope because it will eliminate these reflections, resulting in the inability to obtain the desired image effect. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Guangbi jewelry photography
Light ratio was an important concept in jewelry photography. Under different lighting methods, the light ratio had different effects and effects. For example, in the dual-lamp lighting method, one had to pay attention to the light ratio between the two lamps to achieve a clear distinction between the primary and secondary, so as to control the changes in the light and shadow on the surface of the product to achieve the desired effect. Jewelry photography had different requirements for light ratio depending on the material. Because jewelry products had different shapes, complex structures, and varied materials, if a constant light source was used, the advantage was that the precise control of the light ratio could be judged instantly, which could save a lot of time in the light distribution process. The different material characteristics of jewelry were also related to the light ratio. For example, jewelry made of diffuse reflective materials (such as ancient gold, ancient silver, ivory, rhinoceros horn, etc.) were easier to shoot. The main thing was to make the product bright. The reflective surface of jewelry made of fully reflective materials was smooth, and the light was reflected in parallel. When shooting, the light ratio and other lighting requirements were higher. In short, a reasonable control of the light ratio would help to restore the material, structure, and shape of the jewelry, highlight the main body, and restore the shape, strong texture, and rich layers. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Jewelry photography in Shanghai
There is a part-time job recruitment related to jewelry photography in Shanghai. Yanzhi (Shanghai) is looking for a part-time jewelry photographer with 3 - 5 years of experience, college degree, and jewelry photography experience.(Jewelry sample works required). The job includes using a single-lens reflex camera to take white photos of jewelry products, scene photos, model upper body photos, setting up shooting scenes and post-editing photos, participating in jewelry product video shooting. The workload is about one day per week. The work location is in the offline store of Jing 'an Temple. The salary is 300 - 600 yuan/day. The part-time price can be negotiated. Shanghai Yiling Culture Media also had a similar part-time job recruitment for jewelry photographers. The job requirements were similar to those of Yanzhi (Shanghai). <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>