Polarizer for jewelry photography
In jewelry photography, the CPL Polarizer (Circular Polarizer) had a certain role. First of all, the CPL Polarizer could eliminate reflections. The surface of the jewelry may have reflections that affect the shooting effect. It could eliminate these reflections, allowing the jewelry to show its original clarity, texture, and color saturation in a bright environment. It could better show the details, color, and so on. Secondly, the CPL Polarizer could increase the color density, making the color of the jewelry more vivid and full, thereby improving the visual effect of the jewelry in the photo. However, if you want to shoot metallic highlights on jewelry or use reflections to create special effects (such as some glossy reflection effects on jewelry), it is not advisable to use a CPL microscope because it will eliminate these reflections, resulting in the inability to obtain the desired image effect. Read more exciting novels for free
Jewel photography, Polarizer
Polarizer was a lens made according to the principle of light refraction. In jewelry photography, a prismatic lens could be used to selectively allow light to pass through in a certain direction. It was often used to eliminate or weaken the strong reflection of the metal surface, thereby effectively eliminating or reducing the light spots and reducing the reflection problems caused by the uneven reflection of the jewelry. In addition, there was also a multi-functional jewelry prismatic lens. A groove was vertically arranged on the upper surface of the base, and a jewelry weighing device was mounted at the bottom of the groove. The upper surface of the device was covered with a square prismatic lens glass tray, and an LED lighting strip was horizontally installed in the gap between the prismatic lens glass tray and the jewelry weighing device. A loudspeaker device was installed in the middle of the front surface of the prismatic lens base, and the middle of the back side of the upper surface of the prismatic lens base was vertically connected to an eyepieces platform. A liquid crystal display screen overturning axis is horizontally arranged at the rear end of the upper surface of the eyepieces platform, and the other end of the liquid crystal display screen overturning axis is connected with the liquid crystal display screen. A polar lens eyepieces is arranged downwards in the middle position of the front side of the upper surface of the eyepieces platform, and an intelligent camera device is arranged vertically downwards in the middle position of the front surface of the eyepieces platform. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Jewelry photography
Jewelry photography was known as jewelry photography. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Jewelry photography lighting
There were many ways to set up lighting for jewelry photography. The following were the common ones: ** 1. Single lamp lighting method ** - Usually, the camera was shot from a side angle. This angle was more suitable for shooting jewelry such as diamonds, because the side angle did not have to worry about the camera lens creating shadows. A single lamp could make the light and shadow more three-dimensional and more penetrative. ** 2. Double Light Illumination Method ** - It was shot with two sheets of paper and two lights. When shooting, pay attention to adjusting the angle and distance of the lights to control the change of light and shadow on the surface of the product, so as to achieve the desired effect. Moreover, he had to pay attention to the light ratio between the two lights and make sure that the primary and secondary lights were clear. ** Three-lamp lighting method (Surrounding lighting method)** - The product was completely surrounded from three angles, leaving only the position of the camera to enter the light. Then, the light distribution was adjusted in three directions around the camera to capture the desired effect. The main light, auxiliary light, and outline light would change according to the subject of the shoot. This method was more friendly to newbies. There were different considerations for the lighting of different materials: - ** Diffuse reflective material **: For example, ancient gold, ancient silver, ivory, rhinoceros horn and other decorative ornaments. The material feature is that the light projected on the rough surface will be reflected in all directions. A beam of light will hit the product and reflect aimlessly. This kind of material was relatively easy to shoot, as long as the product was bright. - ** Fully reflective material **: Mainly made of pure gold, platinum, gold, platinum, silver, alloy, other synthetic metals, and other rare metals. The reflective surface is smooth, and the light is reflected in parallel. When a beam of light shines on the product, the light will produce a directional reflection characteristic according to the principle that the angle of incidence is equal to the angle of reflection. - ** Refraction material **: Most of them are gemstones, such as diamonds, red sapphires, emeralds, jadeites, corals, pearls, amber and other natural rare species. Tourmaline, turquoise, amethyst, agate, lapis lazuli and other semi-precious stones. When light slanted from one transparent medium into another, the direction of transmission would generally change. When a beam of light hit a product, a portion of the light would be reflected by the mirror, and a portion of the light would brighten the internal material. When setting up the light, they would usually use tracing paper, black, white, gold, silver reflective plates, spotlights, soft light boxes, and other tools to meet the needs of different jewelry. For example, for diamond jewelry, if you want to shoot a bright effect, you can use the fill light method to make the brightness of different sides and the highlight of different edges. If you want to completely eliminate the reflection on the jewelry, you can use tent-type lighting. Set up a "tent" on the top and around the jewelry with seamless paper to cover the surroundings, the top, and the front (only a hole that can be inserted into the lens and the light). The "tent" is illuminated softly and indirectly to make the light uniform. For gold and silver jewelry, most of them used direct light to make their color shine, achieving a golden effect. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Jewelry photography method
Here are some ways to take photos of jewelry: 1. ** Selection of lens and equipment settings ** - ** Use of lens **: You can use a macro lens, such as the EF100mm f/2.8L Macro IS USM or the RF100mm f/2.8L Macro IS USM, which can capture the details of the jewelry and highlight the designer's creativity. - ** camera parameters **: to make more images focus, you can use a small aperture, such as f/22 for deep depth of field; the shutter speed is usually set to 1/100; the camera should be installed on a tripod to prevent hand shake from blurring the photos. For black gemstone images, you can use multiple light sources to create layering, and you can also use a mask to create striped lighting patterns on a lamp to increase its attractiveness. If you lack ideas when shooting, you can find inspiration from magazines or Social networks and try to copy the photos. At the same time, determine the position of the light source and the angle of the shot. 2. ** Reflective treatment ** - ** Control of the environment **: Since the surrounding light will affect the reflective surface and the color temperature of the jewelry, the studio should be kept dark and the degree of light reflection should be adjusted by controlling the lighting. - ** Reflecting Plate and Diffuser Usage **: White reflecting plate can reflect the light back to the jewelry and hide the surrounding objects; correct positioning of black or white reflecting plate can eliminate the reflection of flat gold jewelry; Diffuser can reduce the reflection of metal surface, and the position of the reflecting plate should be close enough to the subject to make the light softer. 3. ** Jewelry arrangement and composition ** - ** Clear focus **: When shooting jewelry, you need to be clear about the focus of the accessories, which will affect the appearance, mood, and composition of the image. - ** Backgrounds and props **: The background and props should be kept simple so that the lighting can best show the elegance of the jewelry. For color selection, you can consider the depth of the jewelry's color tone, choose complementary colors to create a harmonious appearance, or use cool colors to make the jewelry stand out. 4. ** Shooting Techniques ** - ** Choosing the shooting angle **: It is important to observe every corner of the jewelry before shooting. Different angles will make the diamonds look different. When drawing the lighting plan, you need to pay attention to each part of the jewelry. - ** Increase the image dimension **: Can take photos with reflections. The reflections can add luster to the accessories, making the picture more perfect and making the jewelry shine. - ** Model display (option)**: Arrange a model to display the jewelry on the body. This will help to show the jewelry's decorative effect to potential buyers and increase sales. - ** background selection **: You can use a background of the same color as the gem to make its color stand out. In addition to choosing a specific color to make the gem stand out, using a black background will help the image stand out and fully display the gem's color. If you take a photo of gold jewelry, choose a high-contrast color (such as red or blue background) to help highlight the gold color. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Jewelry design photography
There were many techniques for jewelry design photography: - ** Light usage **: - ** Use natural light **: On cloudy days, place the jewelry next to the window and use soft natural light to shoot. The rich reflection on the surface of the jewelry can be shot, and there is no obvious shadow around it. The picture is clean and suitable for expressing the elegant feeling of the jewelry. - ** Artificial Light Softening Treatment **: Table lamps, flashlights, etc. can be used as artificial light sources. Cover them with several layers of transparent plastic bags, thin napkins, or professional sulfuric acid paper to soften the light. Increasing the area of the light source could make the light softer, because a larger area of the light source could make the light more scattered, such as the sky acting as a large soft light cover on a cloudy day. - ** Strong contrast, shiny **: - ** Black and white photo **: Black and white photos without color can highlight the contrast between light and dark. If there was no pure black desktop or background, the darkened background could also be changed to black and white later to adjust the shadows and black to get a pure black background. - ** Light direction adjustment **: In order to highlight the contrast between light and dark, you can use low-angle light to shoot, allowing more light to hit the jewelry. You can use a flashlight or table lamp to shine from a distance to obtain a stronger directional light, but you can't use soft light at this time. - ** Side lighting and backlighting **: Side lighting and backlighting are easy to cause changes in the surface of the jewelry. Compared to normal lighting, it can better show the "luster" of the jewelry. - ** Shooting equipment and lens **: - ** macro lens **: The macro lens can be used to take close-up photos of jewelry, clearly showing the details of the jewelry. If the lighting and elements are arranged properly, the photos will have a more three-dimensional effect. - ** Selection of background **: - ** Same color as the gem **: Choose a simple background with the same color as the gem to make the gem more prominent. - ** Black background **: This will help the image stand out and fully display the gemstone color. For gold jewelry, you can choose a high-contrast color (such as red, blue) background to make the gold more prominent. - ** Picture effect creation **: - ** Take reflection photos **: Reflection can add luster to the accessories in the image, making the picture more perfect and the jewelry more dazzling. - ** Model display **: By letting the model wear jewelry for display, it can show the decorative effect of the jewelry on the body, which helps to increase the purchase intention of potential buyers. In addition, when shooting bare diamonds, they usually chose a black background (black glass or acryl). If the background was colored, it would affect the color of the diamond. However, there were also companies that chose a white background but required purity. Due to the strong light transmission of diamonds, a layer of sulfuric acid paper was needed to cover the cut surface to prevent the diamonds from looking black or broken. When shooting diamonds, the better the equipment (such as Hasse and Freestone), the better the quality of the material and the cut surface, and you can choose multiple light sources to shoot from different angles. However, the more light sources, the better. Two to three light sources are appropriate (you can choose a reflective plate, and you can also use a flash if you have the conditions). For diamond inlaid jewelry (such as rings, bracelets, necklaces, etc.), the photographer could consider the lighting method according to the different materials of the diamond and metal. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Jewelry photography in Shanghai
There is a part-time job recruitment related to jewelry photography in Shanghai. Yanzhi (Shanghai) is looking for a part-time jewelry photographer with 3 - 5 years of experience, college degree, and jewelry photography experience.(Jewelry sample works required). The job includes using a single-lens reflex camera to take white photos of jewelry products, scene photos, model upper body photos, setting up shooting scenes and post-editing photos, participating in jewelry product video shooting. The workload is about one day per week. The work location is in the offline store of Jing 'an Temple. The salary is 300 - 600 yuan/day. The part-time price can be negotiated. Shanghai Yiling Culture Media also had a similar part-time job recruitment for jewelry photographers. The job requirements were similar to those of Yanzhi (Shanghai). <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Wedding photography jewelry
The introduction of jewelry in wedding photography had many meanings. ** 1. From a marketing perspective ** 1. ** Precise Sharing ** - Customers with wedding photography needs often also have wedding rings and other jewelry consumption needs, and most of the consumer groups who buy wedding rings also need wedding photography. If the wedding photography store could provide jewelry purchase or diamond ring custom-made services, not only could it expand the customer source, but it could also guide the second consumption based on the existing accurate customers, making the customer service chain more complete and proactive. 2. ** Marketing Extension ** - Wedding photography was usually a one-time expense, but after the introduction of jewelry sales, more customer marketing activities could be carried out. For example, they could provide value-added services for jewelry (such as replacement services, cleaning and maintenance services, etc.). They could also use jewelry as a marketing gimmick, such as giving diamond rings after shooting a certain amount of money, so as to increase the traffic of the store. Moreover, it could increase the stickiness between customers and stores, and then extend marketing strategies, such as launching personal photo shoots, family photos, corporate photos, and other services. ** 2. From a service perspective ** - ** Value Added Service **: Brides all want to show their most beautiful side in their wedding photos. In addition to providing wedding dress rental and photography services, photography agencies could also provide high-quality jewelry during filming to enhance their competitive advantage and be more favored by customers. When the bride wore a wedding dress and matched it with shiny jewelry, it could satisfy women's dream of marriage and also help to form a consumer's reputation. At the same time, a reliable jewelry purchase platform was very important. It should be able to provide high-quality jewelry supply, customized service for diamond rings, and create exclusive diamond rings. It was best to cooperate with a number of physical enterprises, have rich experience in store operations, and be able to provide operational guidance and a service to avoid the risk of overstocking. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Jewelry photography belongs to
Jewelry photography belonged to the category of product photography. It focused on capturing the unique charm, exquisite details, and brilliance of jewelry for commercial promotion (such as attracting potential buyers), art display, and other purposes. Jewelry photography involves many techniques, including but not limited to using special lenses (such as macro lenses) and choosing the right background.(such as the same color as the gemstone, black background, etc.), using different shooting angles, using natural or artificial light (such as light boxes, spotlights, fill light, photography lights, etc.) to light up, and through various creative methods (such as taking photos with reflections, using daily necessities such as A4 paper to shoot, etc.) to show the beauty of jewelry. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
photography, jewelry, retouching
Guangbi jewelry photography
Light ratio was an important concept in jewelry photography. Under different lighting methods, the light ratio had different effects and effects. For example, in the dual-lamp lighting method, one had to pay attention to the light ratio between the two lamps to achieve a clear distinction between the primary and secondary, so as to control the changes in the light and shadow on the surface of the product to achieve the desired effect. Jewelry photography had different requirements for light ratio depending on the material. Because jewelry products had different shapes, complex structures, and varied materials, if a constant light source was used, the advantage was that the precise control of the light ratio could be judged instantly, which could save a lot of time in the light distribution process. The different material characteristics of jewelry were also related to the light ratio. For example, jewelry made of diffuse reflective materials (such as ancient gold, ancient silver, ivory, rhinoceros horn, etc.) were easier to shoot. The main thing was to make the product bright. The reflective surface of jewelry made of fully reflective materials was smooth, and the light was reflected in parallel. When shooting, the light ratio and other lighting requirements were higher. In short, a reasonable control of the light ratio would help to restore the material, structure, and shape of the jewelry, highlight the main body, and restore the shape, strong texture, and rich layers. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>