Origami Kitten
The following are a few cat origami lessons: ** 1. A folding method using square paper ** 1. material preparation - A square piece of paper. You can also prepare a colored pen or sticker for decoration. You can also prepare scissors (which may be used in some steps). 2. detailed procedures - First, he aligned the top and bottom corners of the square paper to form a cross diagonal line, and then did the same thing again. - The lower right side was aligned diagonally, and only the right toe was pressed into a crease. The upper right side was also folded and pressed into a crease on the right toe. - Pay attention to the direction of the corners. Fold the upper and lower corners in line, the lower right corner to the center line, and the lower left corner to the center line. - Fold it down diagonally, holding the top corner and folding it down, and folding it down to the crease. - He opened his legs from the middle and pressed down to flatten the creases to line up the midline. - The upper layer was opened a little, and the white edge was folded along the crease to the middle line, and the standing feet were flattened. The white edge on the left side was folded along the crease to the center line. - Fold it down along the corner of the crease (do the same on the left), open it and spread it along the edge. The crease was pinched to the side and pressed flat to the left (the left side was the same, and the crease was pinched to the right). - The corner was aligned with the center line and folded upwards. The toes were aligned with the end point and folded downwards. - He adjusted his ears to be parallel, folded the corners of the short side down, and then adjusted his toes to a suitable position. The left ear was also folded down along the crease, and the toes were adjusted upwards. - His two legs were folded inwards, and so was his left leg. - With this corner as the axis, connect it to the center of the right, and fold the corner to the center line (the same operation is done on the left). - He adjusted the tail, using this corner as the axis. The right corner was folded downwards, and the folded edges were parallel. With this corner as the axis, the lower corner was adjusted upwards. He folded it along the side and opened its two small ears. The cute kitten was folded. ** 2. Another simple folding method (using square paper)** 1. material preparation - A square piece of paper, a colored pen, or a sticker (used to decorate the kitten's facial features). 2. detailed procedures - First, it was folded along the middle, and then folded along the diagonal of the rectangular shape (formed by folding squares). - He cut off the part that had just been folded with scissors and opened it to form a triangle. - The two corners at the bottom were folded towards the middle. - The two corners at the bottom were folded outwards in a certain direction. - The corners of the upper part were folded downwards. - The bottommost corner was folded upwards. - He flipped it over to the back and then back again. He folded two small corners on both sides to decorate the cat's face. - Turn it to the front and draw the kitten's eyes, nose, and mouth, or stick out the facial features with a sticker.
Kitten Origami Steps Video Guide
The following are some video tutorial steps for folding kittens: You can search for related video tutorial on TikTok. For example, videos titled "Cute and interesting kitten folding tutorial #creative handmade #children's handmade #kindergarten handmade #parent-child handmade origami","Simple handmade kitten folding tutorial #handmade diy #kindergarten parent-child handmade #one look at the series #human baby growth plan", etc. These videos show the steps of folding kittens in detail.
Kitten Origami tutorial video is simple
The following is a simple paper folding tutorial for kittens: He needed to prepare a square piece of paper. 1. The upper and lower corners were aligned and folded diagonally; the lower right corner was folded diagonally, and the upper right corner was folded equally. 2. Turn it over, align the lower right corner with the upper corner, and fold the lower left corner with the middle line. 3. Fold it down along the middle line, and the left side will fold along the crease. 4. The two corners were connected, and the upper corner was folded down. 5. Fold the right bottom side to the vertical side, press out the crease and open it; Fold up three times along the crease on both sides, fold the long side to the crease side, press out the crease and open it, and also fold up three times along the crease on both sides. 6. The two sides were aligned, and the upper corner was folded down. 7. The corners were first restored upwards, and the edges were folded upwards in line with the creases. The lower corner was folded to the left, opened, and adjusted by folding upwards three times along the creases on both sides. 8. The corners opened to the left, aligned with the two corners, and the upper corner was folded down. The lower two corners opened and pressed down flat. 9. Fold the lower corner upward, align the two corners, and fold the lower corner upward. 10. Fold it to the left along the right corner of the midline, and fold the lower corner inward a little. Fold the corner in line with the crease, and adjust this side to the right position. Fold it in line with the crease, and this side will be folded like this. Fold it the same way, and the two sides will be folded the same. 11. He folded the top of the crease along the corner of the ear, adjusted the whole, and the three-dimensional kitten was folded.
Three-dimensional kitten handmade origami
Here are a few ways to fold the paper: [Method 1:] 1. Prepare a square piece of paper. First, fold the top and bottom corners of the paper into a cross diagonal line, and then fold it in the same line. 2. The lower right side was aligned diagonally, and only the right toe was pressed into a crease. The same operation was done on the upper right side. 3. Pay attention to the direction of the upper and lower corners, the lower right corner, and the lower left corner. 4. Fold it down diagonally, holding the top corner and folding it down, and folding it down to the crease. 5. He opened his legs from the middle and pressed down on the center line to flatten the crease. 6. The upper layer was opened a little, and the white edge was folded along the crease to the center line. The standing foot was flattened along the crease, and the white edge on the left was folded along the crease to the center line. 7. Fold it down along the corner of the crease (the same operation on the left), open it along the edge, pinch this crease, and press it flat to the left (the same operation on the left, pinch the crease and press it flat to the right). 8. Fold the corners up in line with the midline, fold the toes down in line with the end point, adjust the ears to be parallel to the short side and fold the corners down, and then adjust the toes up to a suitable position. 9. Fold both legs inwards and use this corner as the axis to align with the center line on the right (the same operation on the left). 10. He adjusted the tail and used this corner as the axis. The right corner was folded down, and the folded sides were parallel. With this corner as the axis, the lower corner was adjusted upwards. He folded along the side and opened the two small ears. The three-dimensional kitten was folded. [Method 2:] 1. Prepare scissors, glue, and A4 paper. He could directly print out the structure diagram or draw it by hand. 2. He began to paste and fold the kitten's body to obtain a three-dimensional kitten. [Method 3:] 1. Prepare A4 paper, pencil, scissors, and ruler. 2. Using a pencil, he drew a grid and the cat's body on the A4 paper, then cut out the outline of the cat with scissors. 3. Folded according to the illustration to get a three-dimensional kitten. You can also draw cats with different expressions to increase the fun.
Mini Kitten House handmade diy origami
" Mini Kitten House Handmade Origami." This was just about origami. There wasn't much information about it. It was just about making origami for a mini kitty house.
How is comic origami related to traditional origami?
Comic origami differs from traditional origami in that it uses comic book characters or themes as inspiration. It adds a modern and pop culture twist to the classic art of origami. This can make the final creations more engaging and unique for fans of comics.
vegetable origami
Vegetables folding paper was a kind of handmade activity that was loved by children. Through the use of colored paper and some simple folding steps, one could make realistic vegetable models, such as carrots, green peppers, etc. The steps of folding carrots included folding the paper into a triangle, folding the left and right sides, folding the tip, folding to the left and right, and so on. The steps of folding the green peppers included folding the square colored paper, folding it to the right, folding the triangle on the left to the right, and so on. These origami activities could train the children's hands-on and brain skills, and at the same time increase their understanding and interest in vegetables. If you like origami, you can try these interesting vegetable origami tutorial.
Heart Origami
Here are a few heart folding lessons: ** 1. Simple heart folding paper (rectangular paper)** 1. Prepare a rectangular piece of paper with a length to width ratio of 2:1. 2. He folded it along the middle, then folded the two corners toward the middle line, opened it, and continued to fold in another direction. 3. The two corners were folded inwards along the crease, and the two corners were folded towards the middle line again. 4. Spreading and flattening the two small triangle, fold along the diagonal of the small square (do this on both sides). 5. The folded part was opened and flattened, and the other half was folded according to the above method. Finally, it was turned over to decorate the whole. ** 2. Origami with Wings (Square Paper Model)** 1. Prepare a square piece of paper, first fold it in a cross, then fold it in the middle, turn it over and fold it in the middle. 2. He flipped it over again, opened it, and folded it upwards. After opening it, he opened it again, and folded the opened part one front and one back. 3. Fold the top part down a small part, and fold the middle part into two small triangle (do the same on both sides). 4. He tidied up the wings and turned them over. ** 3. Origami of Love-shaped Garland (Multiple small squares combined)** 1. Prepare eight small square papers and double-sided tape. 2. He took out a square piece of paper and folded it into a cross. He folded both sides in the middle and continued to fold it in another direction. After folding it, he opened it. 3. One of the sides was folded down, and the other side was folded in the middle. Then, the lower part was folded up, and the lower part was folded up again and then opened. 4. After decorating the heart-shaped part, he turned it over and stuck double-sided tape on a specific part. He stuck the two parts together as required, folded the extra small triangle part inward and stuffed it into the folding paper at the back, and then pieced the remaining parts together in the same way. ** 4. Mini 3-D love origami (rectangular paper)** 1. Prepare a rectangular piece of paper and fold it in a specific way (keep folding along the paper). At the end of the folding, leave a small portion of the paper. If the remaining paper is too long, cut off a portion. 2. The remaining parts were folded in the middle and stuffed into the left slit. He used scissors to cut the sharp corners on the left and right sides, and pressed the middle part inward to complete the production. ** 5. Pocket Origami (Square Paper)** 1. Prepare a square piece of paper, fold it in the shape of a rice, and then close it along the crease. 2. Fold it down (do the same on both sides), then fold the top two corners outward. 3. He opened the two corners that he had just folded and folded them inward along the crease. Then, he folded the topmost corner inward and folded two small corners inward on the left and right sides. ** 6. Arrow Piercing the Heart Origami (Square Paper Model)** 1. Prepare a square piece of paper, fold it in a cross, and then fold it in the middle. 2. He flipped it over and folded it from both sides to the middle. ** 7. Double heart folding paper (rectangular paper)** 1. Prepare a piece of 15cm* 7.5 cm rectangular paper and a colored pen. 2. Fold a rectangular piece of paper in half horizontally and then unfold it to create a crease. 3. He folded the left two corners of the rectangular shape towards the center line, and did the same on the right side. 4. Fold the top and bottom sides in half toward the center line. 5. He took out the left corner that was folded inside and folded it outwards. He did the same on the right side. 6. Fold it down along the middle line of the opening. 7. Open the right corner and fold it down, then fold it to the left. The left corner is folded in the same way but in the opposite direction. 8. Turning to the back, he folded the first layer of paper down. At the same time, he opened the left and right corners and pressed them down flat. 9. Fold the rest of the horizontal paper down, and at the same time open the left and right corners and press them down flat (the same as step 8). 10. Fold the opening of the left heart to both sides, then fold the top corner down, and do the same for the right heart. 11. Turning to the back, he folded the two hearts in half and unfolded them. He folded the two ends of the long strip towards the center line. The folding of the double hearts was completed. Finally, he could use a colored pen to write love words on the long strip between the two hearts.
Spaceship Origami
Here are the steps for a spacecraft origami: 1. Prepare a square colored paper, fold the colored paper along the diagonal line, and fold the two sides along the middle line after unfolding. 2. He folded the sharp corner at the bottom corner, unfolded it, and folded the corners on both sides along the crease. Then, he folded the sharp corner in the opposite direction again. 3. He opened and folded the corner that he had just folded. The corners on both sides had to be opened and folded. He turned the paper over and folded the sharp corner to the side. 4. The sharp corner of the other corner was folded in the same way. The folded sharp corner at the bottom was folded upwards, and the folded small sharp corner at the top was folded inwards. 5. Both sides used the same method, and then the folded paper could be opened, and the spaceship would be completed. There was also a type of origami Prometheus spaceship. The difficulty was 3 stars, but the specific steps were not found. The novel "Hundred Years of Spaceship" is equally exciting. Everyone is welcome to click and read it!
Origami J-20
The following is a method to fold a J- 20 fighter jet: 1. First, he folded the A4 paper vertically and horizontally before opening it, then folded a specific point into a triangle, and did the same on the other side. 2. He flipped it over and pressed it according to a certain point. Then, he flipped it over and operated on the center point, folding it into a double triangle shape. 3. He flipped it over and folded it up, folding the corner to a specific position and then folding it again. 4. Turn it over and fold it into a specific shape. Pay attention to the sharp corner and fold the other side in the same way. 5. After turning it over, he folded the corner in different directions, and the other side did the same. 6. After opening it, he folded the corner to a specific place, turned it over, folded it, and folded it in a certain direction. Both sides were the same. 7. He flipped it over and performed specific folding, pressing, and folding operations. The same was true for the inside. 8. He took it to a specific position and folded it. After opening it, he put the fold on a certain part, and the same thing happened on the other side. 9. After flipping it over and folding it for the later operations, repeating the operation of the body part, an origami J- 20 fighter jet could be completed. There was also a relatively simple step: fold the A4 paper left and right, then fold it up and down. The two corners of the long side were folded toward the center line, the short side was folded toward the center line, and then folded left and right. Open it, fold it diagonally, open it again, fold it along the crease, and do the same on the other side. The inner side folded the vertical wings, the head folded, folded, folded down the wings, the head folded, and opened the air intake. The novel " Hundred Years of Spaceship " is equally exciting. Everyone is welcome to click and read it!
Airplane Origami
The simple English translation of " aircraft origami " was " paper airplanes " or " origami airplanes." <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>