The selection of reaction conditions in the laboratory included the following aspects: ** 1. In terms of temperature and time ** 1. ** Based on the amplification reaction (Illustrate the principle of temperature and time settings with examples)** - ** Denaturation temperature and time ** - Denaturation is to melt double-stranded DNA into single-stranded DNA. Generally, 93 - 94 ° C for 1 minute is enough to denature the template DNA. If the temperature was lower than 93 ° C, it would take a longer time, but if the temperature was too high, it would affect the activity of the reagent. This was because this step needed to ensure that the target gene template or the product of the amplification was completely denature. Otherwise, it would cause the amplification to fail. - ** Temperatures and Time of the Refolding Technique ** - The temperature was an important factor that affected the uniqueness of the DNA. After denature, it was quickly cooled to 40 - 60 ° C to allow the primer and template to combine. The temperature and time depended on the length of the primer, the base composition and concentration, and the length of the target sequence. For a primer with 20 bases and about 50% G + C content, 55 ° C was the ideal starting point for selecting the most suitable temperature for the first step. The suitable temperature could be selected by the formula: Tm-value (melting temperature)=4(G + C)+2(A + T), and renaturation temperature = Tm-value-(5 - 10 ° C). Within the range of the melting point, a higher renaturation temperature could reduce the non-specific binding between the primer and the template and improve the specific reaction. The renaturation time was generally 30 - 60 seconds to allow the primer to completely bind to the template. - ** Extending temperature and time ** - Taq DNA Polymerase had different biological activities at different temperatures. 70 - 80 ° C was 150 nt/S/molecular, 70 ° C was 60 nt/s/molecular, and 55 ° C was 24 nt/S/molecular. DNA synthesis could hardly be carried out above 90 ° C. The extension temperature of the amplification reaction was generally between 70 - 75 ° C (usually 72 ° C). An excessively high extension temperature was not conducive to the binding of the primer and the template. The extension time was determined by the length of the fragment to be amplified. One minute was enough for the DNA fragment within 1Kb, 3 - 4 minutes for the target sequence of 3 - 4 Kb, and up to 15 minutes for the amplification of 10Kb. If the extension time was too long, it would lead to the appearance of non-specific amplification bands. The amplification and extension time of the low-concentration template was slightly longer. 2. ** Effect of general chemical reaction temperature on reaction rate ** - The higher the temperature, the higher the chemical reaction rate, and the lower the temperature, the lower the chemical reaction rate. For example, in an experiment to explore the effect of temperature on the chemical reaction rate, two test tubes containing the same amount of 0.1 mole/L Na ^S ^O ^solution were placed in a hot bath and a cold bath respectively. After a period of time, the same amount of 0.1 mole/L sulfuric acid was added. The test tube in the hot water first became turbid, which indicated that the reaction rate would be accelerated when the temperature increased under the same conditions. ** 2. Number of cycles (take the amplification reaction as an example)** - The number of cycles determined the degree of amplification, which mainly depended on the concentration of the template DNA. Generally, the number of cycles was between 30 and 40. The more cycles, the more non-specific products. ** 3. Gas preparation reactor selection ** 1. ** Generation Device ** - It was determined by the state of the reagents and the reaction conditions. - If the reaction is solid and needs to be heated, such as the reaction of producing O <2> by using potassium Permanganate, a solid-solid heating type generator is used. If the reaction is solid-liquid or liquid-liquid, no heating is needed, such as the reaction of producing H <2> or carbon dioxide in the laboratory, a solid-liquid (or liquid-liquid) room temperature generator is used. 2. ** Collection Device ** - It was determined by the density and dissolving ability of the gas. The downward-draining method was suitable for gases with a lower density than air (such as hydrogen); the upward-draining method was suitable for gases with a higher density than air (such as oxygen and carbon dioxide); and the drainage method was suitable for gases that were difficult to dissolve in water (such as oxygen and hydrogen). Read more exciting novels for free
The reaction between copper and concentrated sulfuric acid required heating. Under heating conditions, copper gradually dissolved and bubbles were formed. The gas produced could turn purple litmus red or the fuchsia solution faded. After cooling, the solution diluted and turned blue. The reaction equation was: CuSO4 + SO2 → +2H2O. At the same time, there are side reactions such as 5Cu +4H2SO4 (concentrated)(heating)= 3CuSO4 + Cu2S +4H2O. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Allergy reactions are caused by some people being overly sensitive to the substances (allergens) they come into contact with. When a sensitive individual comes into contact with a foreign, harmless substance (an allergy), the immune system will overreact and the body will produce a type of protein specific to the allergy. These IgE-bound to the high-affinity receptor on mast cells and basophils. When the allergy entered the body again and met with these bound molecules, the form of the immune receptor would change from a dimmer to a monolith. This change in form would lead to the exposure of the protein sites of the relevant signaling pathways, which would activate the downstream signaling pathways, causing allergic reactions such as vasodilation and bronchiectomy. In severe cases, it could cause allergic shock. In an allergic reaction, the affected organs or tissues will be infiltrated by a large number of inflammatory cells (especially those that are not activated), and a high concentration of IgE will appear in the serum. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
The application of the principle of change of circumstances requires the following conditions to be met: 1. ** Time Requirement **: As a major change in the basic conditions of the contract, it should occur between the effective establishment of the contract and the completion of the contract. That is, it is usually a major change that does not belong to commercial risks during the performance of the contract that causes the basic conditions of the contract to be shaken. The objective facts that happened before the conclusion of the contract had already formed the basic conditions for the conclusion of the contract. The parties were willing to bear the relevant risks, so there was no problem of contract adjustment. If the contract had been completed and the rights and obligations of the contract had been terminated, there was no need to change or terminate the contract at this time. 2. ** Major change in basic conditions **: The basic conditions at the time of the conclusion of the contract have undergone a major change that the parties could not foresee at the time of the conclusion of the contract and did not belong to commercial risks. 3. ** Breach of the principle of good faith **: If continuing to maintain the effectiveness of the contract is contrary to the principle of good faith, the party that is negatively affected may renegotiate with the other party. If the negotiation fails within a reasonable period of time, the party may request the people's court or the arbitration institution to modify or terminate the contract.
Under the effect of the aluminum dioxide catalyst, the intermolecular dehydration of methanoi occurs to produce dimethyls and water. The reaction equation is: 2CH oh + aluminum dioxide → CH OCH + H O. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Chloration reaction conditions: - Hot chloridizing: Heat energy is used to stimulate Cl2 to generate a free radical of chloridize, which then reacts with the carbon molecules to form a chloride-containing compound. In the industrial thermal chloridizing process, the ratio of Cl2/CH2 is 1:3 - 4, and the main products are CH Cl2 and CH2 Cl2. Too much Cl2 is easy to explode. The reaction mechanism is a free radical chain reaction, and the composition of the product is related to temperature. - Photo-chloration: Light (commonly used as a light source) is used to excite Cl2 to generate a free radical of Cl2, which then reacts with a hydrogen atom to form a chloride-containing compound. The process is carried out in a liquid phase under mild reaction conditions. - The method of chloridizing by using a catalyst was divided into two types, namely, the uniform and the non-uniform ones. For example, some reactions required high temperature, high pressure, and a catalyst. The ore chloridizing reaction required high temperature, high pressure, and a catalyst. The reaction products were metal chloride-like and hydrogen chloride-like gases. The reaction principle was that the metal elements would undergo an oxido-reduction reaction with the hydrogen. Some organic compounds needed iron and other catalyst for the chloridizing reaction. For example, in the presence of iron catalyst, hydrogen was replaced by chloridize to form chloridize. - For the chloridizing reaction of a specific substance, for example, the preparation of the chloridizing reaction. Oxidation reaction conditions: - [Ores are usually oxided under normal temperature and pressure. The speed and degree of oxidisation are affected by factors such as temperature, humidity, and oxygen concentration. It usually occurs on the surface of ores, causing changes in physical properties such as color, hardness, and density.] - For the thermal reaction of DCl2 in a hydrogen/oxygen mixture, the reaction was carried out in a tube-flow reactor according to the basic thermochemical principles, and the thermal cracking reaction was also studied in the tube-flow reactor. - For the reactions related to propene, it was necessary to prevent local high temperatures and high local Cl2 concentration. Among the reactions of the unsaturation, there were reactions such as the production of 1,2 -diclorethlene from ethene, and the synthesis of ethyne into ethene. The purpose of the oxification of ethene was to utilize the use of the Cl2. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
The synthesis of PET needed to be carried out at a certain temperature and catalyst to increase the reaction rate and yield. Under high temperature, high pressure, or basic conditions, it is easy for PET to undergo a dehydration reaction; under high temperature conditions, it is easy to undergo a thermal decomposition reaction; under small molecular diols, it will undergo a irreversible ester exchange reaction. In addition, when the PET film sample strip was subjected to the Grafting Modification, the reaction could be carried out at a temperature of 80 ° C and a rotation speed of 600r/min for 1 hour. When initiating the reaction, the PET film sample can be placed in a solution containing 1% of tbHP, and the reaction can be initiated for 2 hours at a temperature of 40 ° C and a rotation speed of 450r/min. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
The principle of the reaction between biuret and protein was that biuret could react with copper sulfuric acid to form a purple substance. This might be caused by the peptidic bond structure in the biuret molecules. The nitrogen atom of the peptidic bond would form a purple complex with Cu2 + ions. Because there was also a peptidic bond structure in the protein, such a reaction would also occur. We called the purple reaction between the compound containing the peptidic bond structure and copper sulfuric acid solution "biuret reaction". In other words, as long as the molecules contained a peptidic bond, this characteristic purple reaction would generally occur. It wasn't that biuret reacted directly with the protein, but the reaction between the peptidic bond in the protein and copper ions. It was the same reaction type as biuret and copper ions. It was a " biuret reaction." When carrying out experiments related to the biuret reaction, biuret reagent A was a strong base, and biuret reagent B was copper sulfuric acid. When using it, add A to the protein solution first, shake it up, and then add B. Strong base and copper sulfuric acid can denature the protein, but this does not affect the purple reaction, because the essence of protein degeneration is that the spatial structure is destroyed, causing it to settle and lose its physiological activity. However, the bond structure and the sequence of the protein chain are generally not destroyed. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
The principle of the reaction between the two substances was that the reaction between the two substances would produce NaCl2, H2O, NO, and NO2. The reaction equation was 2NaNO2 + 2HQ = 2NaCl2 + H2O + NO + NO2. This was mainly due to the fact that the nitrogen acid was unstable and would decompose quickly. Moreover, nitrogen acid was a weak acid. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
The components of the toothpaste were composed of zinc-citrate, sodium-glyconate, and sodium-oh. These components could react with the iodine-like substance in the tincture to form the iodine-like substance. Generally, the iodine-like substance was only slightly pale yellow, so when the tincture was dripped into the toothpaste water and stirred, the color of the tincture would disappear. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Ozonation reaction was selective, and the order of the reaction was as follows: alkene> amine> phenols> polyaromatic> alcohol> carbols> alkyls. When a variety of impurities exist, the reaction rate of oxygen (O3) will be prioritized with the fast reaction rate of the impurities. When the PH is less than 11, it is mainly the molecular oxygen reaction, which has the characteristics of selective oxidization. The main impurities are the wastewaters with high molecular oxygen reaction rate constant, such as alcoholic wastewaters and high-ph wastewaters. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>