The following is a teaching design for table tennis beginners: ** 1. Teaching objectives ** 1. To let beginners master the basic movements and principles of the backhand serve. 2. Able to steadily send out balls that meet the requirements and cultivate the ability to control the ball. 3. Let beginners understand the characteristics of different backhand serve methods. ** 2. Teaching content and steps ** 1. theoretical explanation - Explain the importance of the backhand serve in table tennis, such as the impact of the serve's aggressiveness and confusion on the game situation. - It briefly introduced the basic classification of backhand serve, such as flat serve, spin serve, and so on. 2. Basic posture teaching - Position: Teach the beginner to stand at the left corner of the table, with the right foot slightly ahead of the left foot, or with both feet parallel to each other (for backhand service positions). - Throwing posture: Throwing the ball with the palm of your left hand. For a backhand flat serve, the ball should be placed in front of the left side of the body. The height of the ball must be more than 16 cm (part of the serve requirements). 3. Teaching the Backhand Plain Strike - Lead the racket: Turn your body slightly to the left, and at the same time, rotate your right arm outward, so that the racket angle is slightly forward, and then lead the racket to the back left of your body. It was emphasized that the lead should be as consistent as possible. - Hit the ball: When the thrown ball falls back slightly higher than the net, the right hand holds the pat shape and tilts forward to meet the ball. The middle part of the shot, the first landing point after the ball is hit is close to one-third of the table. Be careful not to exceed the center of the table to avoid hitting the net. - Restore: The arm and wrist will continue to swing to the right and quickly restore to the basic hitting posture, preparing for the next hit. 4. Teaching Backhand Spinning Without Spinning - [Movement Key: The essence is to use similar movements to produce different spinning effects.] The movements had to be as realistic as possible, making it difficult for the opponent to judge the rotation of the ball. 5. methods of practice - Multi-ball practice: Under the guidance of the coach, practice with multiple balls. Beginners first focus on the accuracy of the action, and then practice repeatedly according to the above steps to gradually increase the stability of the serve. - Fixed movement practice: Individual practice of the racket, throwing the ball, hitting the ball, reduction, and other movements to form muscle memory. 6. Teaching feedback and correction - During the practice, the coach closely observed the beginner's movements and pointed out the problems in time, such as the height of the ball was not high enough, the hitting position was not accurate, the movement was not coherent, and so on. He also gave targeted correction suggestions. ** 3. Reflection on Teaching ** 1. merit - The step-by-step teaching from the basic theory to the actual movements was helpful for beginners to systematically learn the backhand serve technique. - It emphasized the standard and consistent movements to lay a good foundation for the subsequent improvement of the serve technique. - The combination of multi-ball practice and fixed-action practice allowed beginners to master the basic essentials of backhand serve in a relatively short period of time. 2. deficiency and improvement - For beginners, it may be difficult to master the skill of turning the ball in a short time because it requires a high level of fine control of the movements. In the follow-up teaching, he could increase the practice time of this part appropriately and adopt a more vivid and detailed teaching method. - In the process of teaching, the individual differences of beginners, such as differences in physical coordination and strength, might be neglected. In the future, teaching should pay more attention to individual situations and teach students according to their aptitude. For example, for students with poor coordination, some supplementary exercises could be added to improve coordination. Read more exciting novels for free
In the teaching of table tennis serve game, there are the following points that need to be reflected and improved: 1. ** Teaching content design **: - It should be more specific and targeted. Although some students had mastered the basic skills and rules, they still made mistakes or did not operate smoothly in the actual game. The follow-up teaching needed to incorporate more actual combat skills and practical operations so that students could better understand and master the table tennis serve game. 2. ** Teaching process feedback and evaluation **: - Due to time constraints, students did not receive sufficient feedback and evaluation, resulting in some students not knowing their own strength and technical shortcomings. In the future, teaching should be more specific and detailed in evaluating students so that they could clearly understand their strengths and weaknesses. 3. ** Students 'emotional and psychological state **: - During the game simulation practice, some students were depressed. Teachers should pay more attention to the emotional state of the students, better guide the students to complete the table tennis serve skills and process, and ensure the enthusiasm and participation of the students in the learning process. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
The following is a lesson plan for a kindergarten table tennis game: ##1. Activity Target 1. Train the child's body coordination and flexibility. 2. To stimulate children's creativity and let them explore different ways of playing table tennis. 3. Cultivate children's sense of cooperation and competition. ##2. Event preparation 1. There were a few table tennis balls. 2. Various tools, such as spoons, straws, cardboard, chopsticks, etc. 3. Each group had two baskets (one with a table tennis ball), a tray, a record sheet and pen for each child, a console, a large record sheet, and a number of "tick" and "×" cards. ##3. Activity ###(1) Introduction 1. He took out a table tennis ball and asked the child if he knew it, guiding the child to share his experience in playing table tennis. 2. Today's game was table tennis, and there were special rules. One's hand could not touch the table tennis ball, nor could one pick up the basket. ###(2) Exploring ways to transport table tennis without the help of tools 1. First, let the children think about how to move the ping-pong balls from one basket to another without any tools, and then let the children try it freely. 2. Invite some children to show and talk about their own methods, such as holding with their hands, biting with their mouths, pinching with their fingers, blowing with their mouths, pushing with their noses, etc., to give affirmation to the creativity of the children. ###(3) Use tools to transport table tennis 1. Each group of children was provided with a variety of tools, such as spoons, straws, cardboard, chopsticks, etc., so that the children could explore the use of these tools to transport the table tennis ball to the empty basket. 2. Children were encouraged to try different combinations of tools and dribbling methods. Teachers observed and guided them at the right time. 3. Ask the children to share their tools and dribbling methods. Other children can try to learn. ###(4) Game segment 1. The children were divided into groups for a table tennis competition. 2. The rules were that the ball must be passed to the next child one by one; during the passing process, the ball must not be picked up when it fell to the ground, and it was a foul to pick it up; the ball could not be held by hand, and must be caught with a specified tool (such as a spoon). 3. The winning team would be rewarded according to the completion of the mission. At the same time, the other teams would be encouraged. ###(5) Activity summary 1. Review the process of playing table tennis with the children and summarize the effects and experiences of using different tools. 2. It emphasized the importance of teamwork and creative thinking. ##IV. Reflection on the Event 1. Child participation - In the activity, the children's overall participation was high. They were full of interest in the activity of table tennis and actively participated in the process of exploring different dribbling methods. 2. Achievement of teaching goals - In terms of physical coordination and flexibility training, whether it was using body parts or tools during the dribbling process, children needed a certain degree of physical control to better achieve the purpose of training. - In terms of creativity cultivation, children could come up with a variety of dribbling methods without the help of tools, such as sucking the ball with a straw, using cardboard to fan the ball, etc., showing their creativity. - Through group games, children could feel the importance of teamwork and develop a sense of competition. 3. Inadequacies and improvements - During the activity, they did not pay enough attention to some children with weak hands-on ability. For example, some children had difficulty using chopsticks to pick up the ball, resulting in their enthusiasm being frustrated. In future activities, he had to pay more attention to this group of children. He could give them more practice opportunities or provide more suitable tools for them. - The transition between activities could be more natural and smooth. For example, in the transition from exploring dribbling without the help of tools to dribbling with the help of tools, small questions could be set to guide the child's thinking to make the transition more natural. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
The following is the teaching and training method of table tennis backhand pull: ** 1. Hold the racket ** He used a backhand shallow grip, holding the racket against his index finger and leaning the thumb. This way of holding the racket was good for adjusting the racket face, which not only ensured better control of the arc when pulling the ball, but also made the whole force more smooth. However, you should pay attention to avoid holding the racket too much to the backhand. Otherwise, it may affect the rapid conversion of the movement when switching to the forehand. ** Two, backhand topspin ** 1. ** Prepare the posture ** Standing on the left half of the table, you can step back slightly at the beginning of the practice, about 80 centimeters to 1 meter away from the table, and at the same time, keep a heavy heart. 2. ** Lead Auction ** The head of the racquet was placed on the left hip instead of the hand extending to the left. There was no need to turn the waist like the forehand, only the left hip was retracted and the right shoulder was slightly forward. The center of gravity of the two feet should be on the front foot. His wrist was bent inwards, but not excessively. 3. ** Hit the ball ** He pushed his left knee forward while stretching his abdomen. However, he did not need to stand straight. He just needed to push forward slightly. Then, he accelerated his forearm and spread it to the front right. He hit the ball at the later stage of the ball's rise and touched the upper left part of the ball. The moment he touched the ball, his thumb and index finger grabbed the ball board tightly. His thumb could add a feeling of pushing forward and down. After hitting the ball, when the head of the racket was pointed at the diagonal angle, it instantly stopped and returned to the preparation position. ** 3. Backhand backspin ** 1. ** Lead Auction ** The lead should be slightly lower than the topspin ball and placed in front of the inside of the left thigh. 2. ** Hit the ball ** When you touch the ball, you can touch the left side of the middle or the left side of the middle and lower part. When you touch the ball, you have an upward "up" force, and then press the arc. The forward drive loop had more force and more impact, while the spin loop had more friction and stayed on the board for a longer time. ** 4. Training Method ** 1. ** Experience the feeling of rubbing upwards (transition from backhand to backhand)** When learning the backhand continuous fast pull, you can transition from the backhand kick. If the ball comes with a bit of backspin, it will fall into the net with the poaching action. At this time, the students were required to slightly lower the racquet to the bottom of the table, and then use their arms to exert force upwards. Although they might not feel the strength of twisting the waist, they could understand the feeling of creating friction upwards to turn the downspin into a topspin. 2. ** Experience the feeling of the center of gravity rubbing your arms upwards ** In front of him was a short wooden chair with a rebound board. He let go of the ball and let it bounce freely before pulling it up onto the stage. Because the backhand pull rubbed against the ball during the fall (early or late fall), the ball had to be pulled up when it felt like the ball was falling low. You can prepare more than one bowl of balls to practice. When you pull the ball, the ball will bounce down and the center of gravity will be lowered. Your arms will exert force upward to experience the feeling of your body's center of gravity driving the upward swing. 3. ** Intensified Training ** - ** Multi-ball and single-ball training ** After experiencing the feeling of rubbing the ball upward through the previous two methods, he first increased the stability of the swing through multi-ball training during the continuous backhand pull, and then continued the single-ball continuous pull training. - ** Correct use of waist and hip ** When practicing multiple balls, you have to experience the change of center of gravity. When pulling the ball with a backhand, the center of gravity should always be tilted forward. You can't push your stomach forward and put your center of gravity behind your buttocks. When continuously pulling, one had to use the strength of the waist (abdomen, abdomen), similar to the feeling of twisting a towel. He had to use the non-holding hand to assist him in twisting forward. He had to experience the force exerted on his right abdomen. The entire force exerted felt like boxing, but it was not the force exerted from the front and back. Instead, it had the force of twisting and pushing forward. He could also assist in pushing forward with his right hip and knee to gradually make the force exerted more coordinated. 4. ** The correct use of the wrist ** When you catch the ball and turn it, your wrist should be tight. Your forearm should send the ball out to extend the arc. Don't shake your wrist. You should have the feeling of catching the ball. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
The following is the content of the table tennis backhand twist: ** 1. Overall Movement Flow ** 1. ** Preparing Stage ** - Take the right hand holding a horizontal racket as an example, the two feet are basically standing parallel. His body had to be prepared to deal with the incoming ball, and his center of gravity had to be moderate. 2. ** Step forward ** - When he saw the ball coming, he had to insert his right foot into the table first and coordinate his body to follow up. - The elbow should be placed forward to meet the ball, and the wrist holding the racket should be lowered. Especially when receiving the short ball in the ring, it was very important to start the pace in advance. 3. ** Waving the racket ** - The elbow joint began to be raised forward, and the wrist was lower than the elbow joint. The wrist was bent inward to the inside of the body, and with the elbow joint as the pivot, the forearm drove the wrist to rotate and exert force. - For a right-handed player, the player should aim at the lower left part of the ball or the lower middle part of the ball. If the player twisted the ball sideways, the head of the racket would be facing down, and the trajectory of the swing would be exactly a semicircle. When twisting and pulling, there must be a certain angle. The movement must be full of force. The elbow should be raised and the wrist should be retracted to better participate in the friction. - If you are dealing with a short topspin ball, the racket shape should be more forward to prevent it from going out of bounds. When the racket is used, the upper body should lower the center of gravity and lean forward to suck in the abdomen. The elbow tip of the racket arm should be pushed forward, and the forearm and wrist should be largely retracted. At this time, the head of the racket should point to the abdomen of the player. When the table tennis ball jumps to the chest near the wrist position, the elbow tip of the racket arm should be the axis, and the forearm should be extended to the right front. When the racket touches the ball, the wrist should be extended to rub forward. During this process, although the elbow tip is the axis, it will be retracted. 4. ** Hit the ball ** - Generally, when hitting the ball at the rising or highest period of the incoming ball, the hitting point is generally located in front of the chest. When the ball is touched on the left side, it can effectively avoid spinning. According to the height and rotation of the incoming ball, the position and shape of the ball could be selected. As long as the ball could be "eaten", the rotation of the incoming ball could be effectively offset to ensure that the table tennis ball returned to the stage. 5. ** Restore ** - After hitting the ball, he quickly withdrew his hand and pulled back his right foot, or followed up with a small step (depending on the situation). This would help him give up his position and ensure that the next ball would be fully led. ** 2. Key points for twisting and pulling different balls ** 1. ** Backspin or side backspin ** - This was the most common way to deal with the ball. In the process of leading and swinging, pay attention to the movement of the wrist and forearm to fully rub the middle and lower part of the ball or the middle and lower part of the left side to create enough rotation to overcome the downward spin of the ball, twist the ball into a topspin ball, and then enter the topspin ball stalemate stage. 2. ** Short Topspin ** - The shape of the racket should be more forward. When hitting the ball, pay attention to controlling the strength and friction to prevent it from going out of bounds. ** 3. Practice Method ** 1. ** Someone is practicing with me ** - It would be best if there was someone who specialized in serving short balls so that the trainees could repeatedly experience the backhand twist and pull action. 2. ** Individual Practice ** - You can place a racket near the net on your side of the table, with the handle facing the net. Use a book or other items to pad the handle of the racket so that the surface of the racket and the surface of the table form an inclination of about 30 to 45 degrees. Throw a ping-pong ball on the inclined surface of the racket. After the ping-pong ball falls on the inclined surface of the racket, it will bounce forward. When it falls on the table, the height of the bounce is similar to the effect of someone serving a short ball on the opposite side. At this time, you can practice with the backhand twisting and pulling action. It was best to prepare a basin of table tennis balls to save the time to pick up the balls and continuously experience the backhand twisting and pulling action. While watching the Olympics, you can also read the wonderful novels related to the Olympics!
The following is a reflection summary of table tennis teaching in winter training: ##1. Teaching content 1. ** Diverse technical teaching ** - During winter training, table tennis teaching should cover a variety of skills, such as serving, receiving, blocking, pulling loop, etc. However, there might be a problem that the teaching content was not focused enough. For example, when teaching serve techniques, although many serve methods were introduced, the application and changes of each serve method in actual combat were not explained in depth, resulting in students not being able to use it flexibly in actual competitions. - He did not teach students of different levels according to their aptitude. In winter training, some students with better foundations might feel that the teaching content was too simple, while students with poor foundations might not be able to keep up with the teaching progress. For example, in the teaching of the technique of forehands, there were no more basic and detailed exercises for students with poor foundations. There were also no more difficult challenges for students with good foundations, such as the practice of forehands under different spinning balls and different speeds. 2. ** Integration of tactical teaching ** - Table tennis was not only a competition of skills, but also a game of tactics. In the winter training, the proportion of tactical teaching might be too low. For example, there was no systematic teaching of tactics such as what tactics to use when facing opponents with different playstyles, how to break the opponent's defense when facing a defensive player, and how to defend and counterattack when facing an offensive player. - Tactics and techniques were not closely integrated. In actual teaching, techniques were often practiced first, and then tactics were explained separately, causing students to not be able to apply the techniques they had learned well when practicing tactics. For example, when he taught defensive counterattack tactics, he did not combine the defensive techniques he had learned before, such as blocking the ball and cutting to the side, with the offensive techniques of the forehands. ##2. Teaching Methods 1. ** The effectiveness of training methods ** - During winter training, the training methods used might not be efficient. For example, the excessive use of a single sparring method, such as two people in a group for simple sparring practice, lacked interest and challenge. This kind of training method could easily make students feel tired and reduce their enthusiasm for learning. - They didn't make full use of the time of winter training. Winter was a good time to improve physical fitness and skills, but the training methods did not reflect the uniqueness of winter training. For example, there were no physical training content suitable for winter, such as short-distance sprinting exercises in cold environments to improve students 'reaction speed and explosive power. 2. ** The lack of personal guidance ** - In group teaching, there was insufficient individual guidance for students. Every student had their own technical characteristics and problems, but in the teaching process, teachers might pay more attention to the overall teaching progress and ignore the problems of individual students. For example, some students had problems with their grip posture, which affected the effect of hitting the ball, but the teacher did not discover it in time and correct it. - The teaching method was not adjusted according to the students 'learning style. Some students were visual-based and were more suited to learning through watching a demonstration, while some students were kinaesthetic and needed more hands-on experience. However, in the teaching, there was no different teaching method designed for students with different learning styles. ##3. Students 'Psychology 1. ** Mental adjustment during winter training ** - The cold weather in winter might affect the students 'enthusiasm for training. In the teaching, they did not pay enough attention to the students 'psychological state and lacked guidance for the students' psychological adjustment during winter training. For example, there were no motivational measures or interesting training games to increase students 'enthusiasm for training in cold weather. - As for the psychological pressure during the competition, they did not pay enough attention to it in winter training. Although there might be fewer competitions during the winter training period, it was also necessary to cultivate the students 'ability to cope with the pressure of competitions. For example, there were no training scenarios that simulated the pressure of the competition, such as training under conditions such as time limit and scoring, so that students could adapt to the tense atmosphere of the competition. 2. ** The lack of frustration education ** - In table tennis training, it was inevitable for students to encounter setbacks, such as bottlenecks in improving their skills or failure in competitions. However, in the winter training, there was no timely frustration education for the students. For example, when a student failed many times in practicing a certain technique, the teacher did not give enough encouragement and correct guidance, causing the student to be depressed and affect the subsequent training. ##4. Teaching Evaluation 1. ** Single evaluation criteria ** - In the winter training table tennis teaching, the evaluation standard may be too simple, mainly based on the technical movements and competition results. This single evaluation standard could not fully reflect the students 'learning results. For example, they didn't give enough recognition to students who had improved in teamwork and tactical understanding. - The evaluation lacked dynamic. There was no dynamic tracking evaluation of the students 'progress during the winter training period. For example, there was no regular comparison of the students 'technical level and tactical awareness at different stages, so they could not find the growth and problems of the students in time. 2. ** Promptness and effectiveness of feedback ** - The feedback was not timely enough. After the students completed their training or competition, the teachers did not give timely feedback, resulting in the students not being able to understand their strengths and weaknesses in time. For example, after an internal competition in winter training, the teacher did not comment on the student's performance in time, causing the student to be unable to adjust his training direction in time. - The feedback method might not be effective enough. It was not intuitive and targeted to only give feedback through oral explanations. For example, there was no video analysis or other methods to allow students to see their technical problems more intuitively, and there was no specific improvement plan for different students 'problems. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
The following are some common movements of the backhand technique in table tennis: 1. [Backhand Thrust: This is the basic skill of the backhand style.] During the systematic practice, you must pay attention to the starting point and high point of the opponent's return ball. It was fast and could quickly poke the opponent's diagonally, straight line, and two big corners in the game, creating opportunities for the next attack. 2. Backhand Pick: An older technique, suitable for the backspin ball that doesn't spin too much. You need to judge the rotation of the ball. It can be used with a short swing to attract the opponent to the near stage and create an opportunity for yourself to attack. 3. [Backhand short swing]: The return of the ball should be short. Try not to give the opponent a chance to attack. You must catch the ball when the return ball just bounced up and learn to borrow the opponent's strength to return the ball. It is often used in conjunction with picking and pulling. 4. [Backhand Pulling Rush]: This is the main attack method of the backhand. The main points of the movement are divided into four steps: lead, turn, head, and spread. It requires the cooperation of the entire body. 5. Backhand defense loop drive (for adult practice): The position of the forearm should be higher, and it can be used to receive the loop drive at the highest point. 6. Pulling Backspin (Laterhand Backhand): Slow dribble is the key. At the beginning, you have to find the drop point of the ball and dribble towards the navel or slightly to the left. You have to find the feeling of kicking your legs and hitting your hips in one go. 7. ** Backhand Quick Arching **: The basic requirement is that the position of the racquet should be lower than the fast play. The shape of the board should be bright and slightly forward. When hitting the ball, the wrist, arm, and fingers must exert force together. 8. ** Mid-stage pull (horizontal board backhand)**: Stand about one meter away from the stage, with your feet parallel or slightly forward with your left foot; lead the racket to the left side of your abdomen; press the board; support with your elbows outwards. At the beginning, when you hit the ball in the early stage of the descent, you should have the feeling of facing forward first when you swing. Your wrist, the inner side of your thumb, and your three or four fingers should work together. It is recommended to practice slashing first. While watching the Olympics, you can also read the wonderful novels related to the Olympics!
There were several types of backhand table tennis skills: - [Backhand Thrust: This is the basic skill of the backhand style.] When practicing systematically, pay attention to the starting point and high point of the opponent's return. The starting point was to practice the feeling of the ball, the combination of hitting and friction, and the speed of the forearm swing, while the high point was to practice the backhand force to lay the foundation for the backhand burst. Some fans were easy to drop the ball into the net because they did not open their wrists in time when their forearms were holding the ball, resulting in the lack of an arc. - [Backhand Quick Tear]: This was an advanced technique based on the ball toss. The angle of the racket needs to be parallel to the table (180°), which is different from the pitch (45°). During practice, the sparring partner should feed the ball with an additional loop. The trainee could not retreat from the platform. The plate type should be pressed forward and rubbed. Moreover, the player must have a solid foundation of the ball. The moment the ball touched the wrist, the wrist should instantly accelerate the friction. Otherwise, it was easy to make mistakes or fall into the net. - [Backhand Strike]: It was an old technique that was commonly used in the past. It was very important to take the lead position during practice. The head of the racket should be slightly downward because the main way to hit the ball was to rub the wrist, which would leave better room for stretching. Also pay attention to the proportion of picking and hitting. When the incoming ball is high and does not turn, hit more than picking; when the incoming ball is low and relatively backspin, the proportion of picking is more than hitting; when picking diagonally, hit more, when picking straight line (because the path is short), pick more, and add more friction and arc to increase the probability of coming to the stage. - [Backhand short swing]: The return of the ball should be short to avoid giving the opponent a chance to attack. It is often used in conjunction with the pick and twist. There were two kinds of swing: "support swing" and "quick swing". The "support swing" was the level of the racket face, which was used to support the net with the force of the ball. It was suitable for the special rotation of the backspin ball. The "quick swing" was to adjust the racket face according to the rotation of the ball, and use the wrist to chop down. Like a chicken eating rice, the wrist felt shaking. - [Backhand Pulling Rush]: This is the main attack method of the backhand. It requires the cooperation of the entire body. The main points of the movement are: lead, turn, head, and spread. - ** Backhand Pushing Block **: It's easier to master than the backhand drive. It focuses on the forward and backward force, mainly to experience the impact feeling. For the upspin ball near the table, the timing of the shot is the rising period. - ** Backhand Bounce **: It can be understood as an "enlarged version" of the backhand push block. The key point is to add the shaking force of the wrist. It is mainly aimed at the no-spin ball or topspin ball near the net. The timing of the shot is at the high point. - Backhand Pick: Mainly targeted at weak backspin near the net. It can replace twisting and pulling. It is sudden and can also be used with feints to pick two lines. - Backhand Backspin: Mainly experience borrowing strength, hitting the ball in front of you and during the rising phase, and adding friction to make the ball produce an upward arc over the net. While watching the Olympics, you can also read the wonderful novels related to the Olympics!
The backhand table tennis movement included many techniques: 1. Backhand "Pushing" the ball: This was the most basic technique of backhand play, the foundation of all backhand techniques. "Poke" the ball at the starting point and high point of the opponent's return. When he pulled the racket, his wrist naturally drooped and the plate shape lit up. His forearm waved to the front right, his wrist had a shallow movement, and his waist turned from left to right. 2. ** Backhand Quick Tear **: An advanced technique based on the "Pushing the Ball". The action essentials were different from the "Poke". The angle of the racket in the "Poke" could be 45°, but the angle of the racket in the "Quick Tear" had to be parallel to the table (180°). 3. [Backhand "Picking Hit": It's an old technique that was used more often during Wang Liqin's era.] It can be used in conjunction with a short stance to attract the opponent to the stage and create an opportunity for oneself to attack. The rotation of the ball must be judged when using it, and it is only suitable for the ball that does not spin too much. 4. Backhand "Short Throw": The return of the ball should be short. Try not to give the opponent a chance to attack. It is often used in conjunction with "Picking Hit" and "Twist Pull". The key point of the technique was to catch the ball just as it bounced back and borrow the opponent's strength to return the ball. 5. Backhand Pulling and Rushing: It was the main attacking method of the backhand in table tennis. The movements were divided into four steps: lead, turn, head, and exhibition. The racquet should be lower than the ball, and it is better to lead it to the abdomen. When the racquet is led, the center of gravity is lowered. The moment the ball is touched, the right foot will step on the ground and the center of gravity will be lifted. The forearm will be swung to the right front with the elbow as the axis. The rotation of the wrist will be more obvious. 6. Backhand flick/knock: Backhand flick is similar to backhand knock. It is a move where the wrist drives the forearm to hit the ball in the middle and late stages of the ball's rise. It is mostly used to deal with high-hanging arcs or half-high balls that don't spin much. It is an oppressive defensive move. 7. Backhand Plunge: It was a technique commonly used by shake-hand players. While watching the Olympics, you can also read the wonderful novels related to the Olympics!
In a table tennis match, a backhand and a forehand attack was a common and exciting scene. Many athletes had this ability. For example, in the quarterfinals of the men's singles at the 2020 Qatar open, there were many backhand and backhand attacks between " Big Fatty " Liang Jingkun and " Big Head " Wang Chuqin. Different athletes had their own characteristics in the backhand and backhand attacks. Some athletes might have stronger forehands and use their strength and speed to score points, while some athletes had outstanding backhand skills and could compete with their opponents 'forehands. Backhand and forehand attacks also involved some tactical use. For example, in the match between Wang Liqin and Chen Wei, Wang Liqin used the counter-attack tactic to attack the opponent's weak backhand. In addition, the serve was also related to the backhand and the forehand. For a player with a strong backhand, if he used a normal side serve, it would be difficult to play the backhand advantage when the opponent received the serve and had a high probability of receiving the forehand position. The reverse side spin serve was one of the best serving sets that could fully play the strong backhand attack. Fan Zhendong and Zhang Jike were good at using the reverse side spin serve to organize two-sided attack tactics. When the opponent received the serve, they could use a high-quality backhand straight line to attack the opponent's empty forehand. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
In table tennis, the backhand and backhand leg forces are different. For the forehands, they needed extra strength from their legs when pulling the ball. Specifically, when preparing, the center of gravity was pressed down, and then the legs were pushed up and moved forward and upward. During this process, the force of the legs was the starting part of the power transmission. The power was transmitted from the legs to the waist and abdomen, then to the arms, forearms, and wrists, providing sufficient power for the shot. However, in a conventional forward and backhand attack, if the base was stable enough, the legs could provide enough support, and there was no need to add force to the legs. This was because the force from the legs and feet would be transmitted to other parts. On the one hand, there was not enough time, and on the other hand, the attacker would easily lose balance. In terms of backhand, when preparing to catch the ball with backhand, the left foot could be slightly adjusted to the left foot slightly back in order to draw the racket and accumulate power. Although it was not clearly stated that the leg was exerting force here, this position adjustment created better conditions for subsequent force. Furthermore, the legs could coordinate with the other parts of the body through movements such as kicking the ground. The strength could be transmitted to the arms and other parts of the body to provide strength support for the backhand. However, in the backhand technique, most of the time, the forearm and wrist should be used to exert strength. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>