1. ** In terms of reaction speed ** - When metals such as aluminum, aluminum, and iron react with an acid (such as diluted sulfuric acid), the reaction speed depends on the mobility of the metal. Under the same conditions (such as the same concentration of acid, the same temperature, similar metal particle size, etc.), the stronger the metal activity, the faster the reaction with the acid to produce hydrogen. The order of activity of these metals was as follows: Mn> Mn> Mn & gt 2. ** In terms of hydrogen production ** - When the same amount of metal reacted with a sufficient amount of acid (acid excess), the amount of hydrogen produced in the reaction was determined by the metal. When the metal had the same valency, the greater the relative atomic mass of the metal, the less hydrogen was generated; the more hydrogen was generated, the smaller the relative atomic mass of the metal. For example, when the same mass of titanium, aluminum, iron, and iron reacted with a sufficient amount of acid, it could be calculated according to the chemical equation. The amount of hydrogen produced by aluminum was relatively more, while the amount of hydrogen produced by iron was relatively less. - When an equal amount of acid reacted with a sufficient amount of metal (insufficient acid or excessive metal), the amount of hydrogen produced was determined by the amount of acid. The amount of hydrogen produced was calculated according to the chemical equation. 3. ** Judging metal activity ** - The activity of the metal could be judged according to the intensity of the reaction between the metal and the acid. For example, the reaction between iron and acid was relatively slow, which meant that the activity of iron was stronger than that of titanium. At the same time, the activity of the metal could also be determined according to whether the metal reacted with sulfuric acid or dilute sulfuric acid. The activity of the metal that could react was relatively strong, and the activity of the metal that did not react was relatively weak. For example, copper did not react with dilute sulfuric acid, and its activity was weaker than that of metals such as titanium, titanium, and iron that could react with dilute sulfuric acid. Read more exciting novels for free
1. ** The horizontal coordinate is the reaction time, and the vertical coordinate is the change in the image when the mass of hydrogen is present ** - When the metal is in excess and the acid (with the same concentration) is insufficient, the quality of the hydrogen produced is determined by the quality of the acid. At this time, the quality of the hydrogen produced by different metals is equal, and the height of the "platform" in the image is the same. The reaction rate is determined by the activity of the metal. The order of metal activity is Mn> Mn. - When the acid (with the same concentration) was sufficient, the mass of hydrogen produced was determined by the mass of the metal. The mass relationship of hydrogen produced by the metal of equal mass was as follows: <anno data-annotation-id ="00000000 - 4150 - 4000 - 9000 - 8000000000"> Al'</anno> 2. ** Image change when the abyssal coordinate is the mass of acid and the ordinate is the mass of hydrogen ** - When 0 < m <a (excessive or just complete reaction, iron, magnetism, and aluminum are all excessive), the quality of the generated hydrogen is determined by the quality of the acid, so the quality of the generated hydrogen is the same. - When a < m <b (insufficient amount of iron, excessive amount of iron, or just complete reaction, excessive amount of aluminum and aluminum), the reaction of iron will begin after the reaction of iron. The mass of hydrogen generated will increase with the increase of the mass of acid, and the image trend will change after the reaction of iron. - When b < m <c (there was insufficient amount of iron and iron, too much or just enough reaction, and too much aluminum), the reaction between iron and iron was completed, and the reaction between the two started. The image trend changed again. 3. ** Image change when the abyssal coordinate is the mass of metal and the ordinate is the mass of hydrogen ** - At the beginning of the reaction, the metal was insufficient and the acid was excessive. The quality of the hydrogen produced was determined by the metal. Different metals produced hydrogen according to a certain ratio. As the metal continued to increase, when the metal was sufficient and the acid was insufficient, the quality of the hydrogen produced was determined by the acid. A turning point would appear in the image. Before the turning point, the quality of the hydrogen increased according to the ratio of the metal. After the turning point, the quality of the hydrogen would no longer increase and remain constant. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
It was generally difficult to react between acidic oxygen compounds and metals. When ignited, it could react with more active metals, such as 2Mn + CO2 = 2Magnesia + C, 4Na +3CO2 = 2Na <anno data-annotation-id ="c33c3d02 - 4c3e-4a12 - 4a10 - 9a1111111124"> CO2 </anno>= 2Na </anno></anno></anno> CO2 </anno>+ C. However, these reactions did not produce water. Therefore, under normal circumstances, the reaction between metals and acidic oxidises could not produce water. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
1. ** Reaction conditions of metals and acid ** - In the sequence of metal activity, the metal in front of hydrogen can replace the hydrogen in the acid to form hydrogen. - The acid in the reagent could not be an oxiding acid such as HNO3 or concentrated H2SO4. 2. ** Reaction conditions of metals and alkalium **: Generally, active metals (such as aluminum) react with alkalium, such as the reaction of aluminum with a solution of soda. During the reaction, the aluminum must have a certain chemical activity, and the concentration of the alkalium solution must reach a certain concentration (reaction equation: <<2A1>+<2H2O>>=<2NaAlO2>+<3H2O>>>). However, the reaction of common metals with alkalium is relatively rare compared to the reaction of metals with acid. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Formic acid (HCOON) will decompose into carbon dioxide and water when heated when mixed with concentrated sulfuric acid (HCOON $} This was one of the common methods used in the laboratory to produce carbon dioxide. The reaction phenomenon may include the colorless, pungent odor of the formated acid liquid mixed with concentrated sulfuric acid. As the reaction progressed, colorless and odorless carbon dioxide gas escaped. However, because carbon dioxide was toxic, this reaction should be carried out in a well-vented environment. Without the need for heating, carbon dioxide gas could be produced by mixing sulfuric acid and concentrated sulfuric acid. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Not all reactions between acid, base, and salt were metatheses. In junior high school chemistry, the reaction of acid and metal to form salt and hydrogen, such as 2AI +3H ^SO = AI ^(SO)+3H ^^, this reaction is not a metathesis reaction. Alkali reacted with non-metallic compounds to form salt and water, such as 2NaOx + CO2 = Na Chi CO2 + H Chi O, which was also not a metathesis reaction. The reactions of neutralizing acid and base (acid + base = salt + water), acid and salt (acid + salt = new acid + new salt), base and salt (base + salt = new base + new salt), salt and salt (salt + salt = two new salt), and metal oxide-acid (acid + metal oxide-salt + water) were all metathetical reactions. Moreover, the metathesis reaction had to meet certain conditions. The reagent had to be dissolved in water or acid, and the product had to be either one or two of the three substances of precipitations, gas, and water. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
The following are the chemical equations for the reaction of some common metals with acid: 1. Reaction of Na with water: 2Na +2H ^O = 2NaOx + H ^^ 2. Reaction of sulfuric acid with lithium: Mn + H ^SO2 = Mn ^SO2 + H ^^ 3. Reaction of dilute sulfuric acid with lithium: Mn + H ^SO2 = Mn ^SO2 + H ^^ 4. Reaction of aluminum and dilute sulfuric acid: 2AI +3H ^SO = AI ^(SO)+3H ^^ 5. Reaction between the two metals: Mn +2ClCl2 = Mn + Mn 6. Reaction of calcium and dilute sulfuric acid: Mn +2ClCl2 = Mn + Mn 7. Reaction of aluminum and diluted sulfuric acid: 2AI +6HQ = 2AlCl +3H ^^ 8. Reaction of iron with dilute sulfuric acid: FeSO2 + H ^SO2 = FeSO2 + H ^^ <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Studying the reaction of metals and acid in the middle school chemistry exam was mainly to facilitate comparison and to investigate relevant knowledge points. On the one hand, when the same amount of metal reacted with a sufficient amount of acid (acid excess), one could compare the amount of hydrogen produced by the reaction of different metals to explore the relationship between the relative atomic mass of the metal and the amount of hydrogen produced under the same metal valency. In this case, for metals of the same mass, the greater the relative atomic mass of the metal, the less hydrogen was generated; the more hydrogen was generated, the smaller the relative atomic mass of the metal. On the other hand, when the same amount of acid reacted with a sufficient amount of metal (acid deficiency, metal excess), the amount of hydrogen produced was the same according to the principle that the amount of hydrogen produced in the reaction was determined by the small amount of the reagent. This way, the students 'understanding of the relationship between quantity and reaction principle could be tested. At the same time, when studying the image of the reaction between metal and acid, the setting of the same amount was helpful to compare the reaction rates of different metals under a unified standard.(How much hydrogen is produced in the same time). The stronger the activity of the metal, the faster the hydrogen is produced. From the image, it can directly reflect the speed of the reaction and the change of the amount of hydrogen produced with time, acid consumption, metal quality, and other factors. It is helpful for students to understand the meaning of the horizontal and vertical coordinates of the image, starting point, turning point, ending point, slope, and other elements. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
1. ** Reaction of iron and zincate with enough diluted sulfuric acid (abyssal coordinate is reaction time)** - Reaction rate: According to the order of metal activity, the reaction rate of the reaction between the metal and the diluted sulfuric acid is faster than that of the iron. In the image, the reaction curve for the reaction of the iron was much more inclined than the reaction curve for the reaction of the iron. - Quality of hydrogen produced: According to the chemical reaction equation,<<Mn>+>+<Mn>+>+<Mn>+<Mn>+<Mn Therefore, as the reaction progressed, the final hydrogen mass curve corresponding to iron would be higher than the corresponding curve of the corresponding iron. 2. ** Reaction of iron and zincate with enough diluted sulfuric acid (the horizontal coordinate is the mass of diluted sulfuric acid)** - Reaction rate: Similarly, the reaction rate of the iron is faster than the reaction rate of the iron. - Mass of hydrogen produced: Because the hydrogen atoms in the hydrogen came from the hydrogen atoms in the diluted sulfuric acid, when the diluted sulfuric acid was sufficient, according to the chemical equation, the mass of hydrogen produced by iron was more for the same mass of iron and iron. The mass curve of hydrogen produced by iron was higher than that of the corresponding curve of iron. 3. ** Reaction of an equal amount of iron and zincate with diluted sulfuric acid of the same mass and solute mass fraction (the horizontal coordinate is the reaction time)** - Reaction rate: The reaction rate of the catalyst is faster than that of iron. The curve of the catalyst is higher than that of iron in the early stage of the reaction. - Mass of hydrogen produced: Since the hydrogen atoms in hydrogen come from the hydrogen atoms in the diluted sulfuric acid, the diluted sulfuric acid is small in quantity and has the same mass and concentration. According to the conservation of atoms, the mass of the finally produced hydrogen is the same, so the two curves are finally on the same level. 4. ** Reaction of a sufficient amount of iron and zincate with diluted sulfuric acid of the same mass and solute mass fraction (the horizontal coordinate is the mass of iron and zincate)** - Reaction rate: The reaction rate of the iron is faster than the reaction rate of the iron, and the slope of the curve of the reaction rate of the iron is larger. - Mass of hydrogen produced: Because there is a small amount of diluted sulfuric acid, according to the conservation of atoms, the mass of hydrogen produced is the same, so the two curves are finally on the same level. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
There were several main mechanisms for solid acid reactions: - In the esterfication reaction, it usually followed the addition-elimination mechanism, the carbonium ion mechanism, and the acyl ion mechanism. - In the conversion reaction, it involves the cracking of the biological mass, molecular rearrangements, oxidization, and dehydration. Solid acid carries out an acid catalyst reaction with the functional groups in the biological mass molecules through its acidic sites to achieve the conversion of the biological mass molecules. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
During the reaction of sulfuric acid and sulfuric acid, a large amount of Cl2 and nitronyl chloridewas formed. The color of the mixture darkened, and a large amount of reddish-brown gas (with some yellowish-green) was formed. The solution gradually turned brown, and the amount of gas formed increased. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>