Method of Maintaining Bamboo
The maintenance methods of bamboo included the following aspects. First of all, the bamboo had a strong demand for light. It liked a bright environment, but it was not resistant to direct sunlight. Secondly, the bamboo liked a warm environment. The suitable growth temperature was around 18 ° C to 28 ° C to avoid large temperature changes. In addition, the bamboo had a moderate requirement for moisture. It could not be too dry or moist. It could be maintained in a moderate moist state. In addition, the bamboo required soft and fertile soil, so applying an appropriate amount of liquid fertilizer every once in a while could promote its growth. In terms of trimming, it was necessary to remove the withered leaves in time to maintain the health of the entire plant. At the same time, it was necessary to trim the leaves to maintain the orderly growth of the branches and leaves. In general, the maintenance methods of the bamboo included suitable light, temperature, moisture and nutrition, as well as timely trimming.
Breeding Method of Bamboo
There were two ways to breed bamboo: sowing and splitting. Sowing and reproduction was to collect mature seeds from October to November, then place the seeds in a pot and wait for them to germinate. Sub-plant reproduction was to split an adult bamboo plant into several smaller plants and then replant them in flower pots or gardens. These methods required suitable temperature, humidity, and light conditions to ensure the growth of the bamboo.
Illustration of bamboo fixing method
There were many ways to fix bamboo pieces. The following were some common methods: 1. [Binding method: You can use rope or thread to bind it.] He first marked the places that needed to be connected, then cut out a part that could be inserted into another bamboo, connected them together, and tied them up. 2. Plugging method: First, you need to cut off some bamboo skin at both ends to form a plug-like tip, trying to preserve the integrity of the bamboo piece as much as possible. Then, he connected the two bamboos together and inserted the peeled end into the other bamboo. Use glue, cement, or other materials to fix it. 3. [Buried head cap method: suitable for thicker bamboo.] He first made one end into a cylinder (also known as a "cap"), then cut a matching notch on the bamboo at the other end. Finally, he fastened the cap on it and secured it tightly with a tool. 4. Screw fixing method: You can use a screw to fix the bamboo pieces together. First, he laid down half of the bamboo piece, then passed the bamboo piece through the fixing incision, and then laid down half of the bamboo piece. Every five pieces were fixed once, and they were fixed with screws. These methods could be chosen according to actual needs and application scenarios.
Bamboo Splices Connection Method
There were many ways to connect the bamboo pieces, and the specific choice depended on the actual application scenario and requirements. A common method was binding. One could use a rope or thread to bind two bamboos together and tie them up. The other method was the inserting method, which required the bamboo skin to be cut off at both ends of the bamboo piece to form a plug-shaped tip. Then, the two bamboos were connected and fixed with glue, cement, or other materials. Another method was to bury one's head in the cap, which was suitable for thicker bamboo. First, one end was made into a cylindrical cap, then a notch was cut on the other end of the bamboo, and finally the cap was fastened on it. Other than that, there were also other methods of joining, such as the joint between bamboo and bamboo, and the connection structure of round bamboo furniture. In short, choosing a suitable bamboo connection method needed to consider the thickness of the bamboo, application scenarios, requirements, and other factors.
Fixing method of bamboo with screw
The following fixing methods can be used to fix the bamboos together: First, special screws can be used to fix the bamboo flooring to the keels to ensure that the screws are evenly distributed and vertically fixed. In addition, special connecting pieces could be used to connect the edge of the floor to the knight board to enhance the stability of the floor. The other method was the floating installation method, which was to use the mortise and groove between the bamboo flooring boards to bite each other. There was no need to use glue or nails to adapt to the changes in the outdoor environment. In some cases, it is also possible to use a floor glue to stick the bamboo flooring to the ground, but you need to ensure that the ground is flat and dry, and use a special floor glue. It should be noted that when installing outdoor bamboo flooring, the first thing to do is to do the basic treatment work to ensure that the ground is flat, clean and dry. As for the method of fixing the bamboo to the wall, he could use nails or screws to fix the bamboo directly to the wall and add appropriate support around it. In summary, you can use screws to fix the bamboos together, but you need to pay attention to the use of appropriate screws and fixing methods.
Illustration of the trimming method of bamboo
The method of trimming bamboo included the following steps: 1. Topping the top during the seedling stage would remove the top branches of the plant. Topping could be done many times to control the growth height and promote the growth of side branches. 2. Cut off the withered leaves and pests in time to avoid affecting the growth. 3. Cut the branches and leaves that are too dense, remove the branches that are too dense, the branches that are inside the chamber, and the cross-branches, so that the remaining branches and leaves have enough space to grow and increase the light transmission and ventilation. 4. For long branches, they could be cut short to maintain the overall beauty of the plant. Please note that the above answers are summarized based on the search results provided. There may be other details that need to be referred to for the specific trimming method.
Binding method of bamboo frame
There were several common methods to tie bamboo shelves. The first was the single circle method, which was suitable for situations where the diameter of the bamboo pole was not large. This method was to cross two bamboo poles, then pass one bamboo pole from the top to the bottom of the other bamboo pole, and then pass from the bottom to the top of the other bamboo pole to form a ring, and then pull the ring down. The second method was the double-circle method, which was suitable for bamboo poles with larger diameter. This method was to hold two crossed bamboo poles in one hand, then pass one bamboo pole from the top to the bottom of the other bamboo pole, and then from the bottom to the top of the third bamboo pole, forming a ring. Then, the ring was pulled down again, and the ring was pulled up again to pass under the third bamboo pole, forming a second ring. Finally, the ring was pulled tight. In addition, there was also the cross-knot binding method that was suitable for specific needs. For specific details and steps, you can refer to the provided document.
Cultivation method of martial bamboo
The cultivation method of martial bamboo included choosing a suitable environment, selecting suitable seedlings, formulating a reasonable maintenance plan, and trimming in time. When choosing a planting location, you should choose a place with sufficient sunlight, good ventilation, and good drainage. When selecting seedlings, choose seedlings with straight stems and complete plant shapes, and pay attention to checking whether there are pests and diseases. Making a reasonable maintenance plan included scientific planning of watering time and quantity, reasonable arrangement of fertilizer time and fertilizer dosage. During the growth of the martial bamboo, it needed to be trimmed appropriately to control the height and number of stems to ensure that the plant shape was beautiful and the leaves were lush.
Bamboo Man's Playing Method
There were many ways for the bamboo people to play. The following are a few common ways to play: 1. [Standing: Place the bamboo man on the ground, adjust its angle and center of gravity, and it can stand steadily.] 2. [Walking: Use your fingers to control the joints of the bamboo person. You can make it move forward, backward, left, and right.] 3. [Spinning: Spinning the Bamboo Man's body once will make it do a spinning action.] 4. [Jumping: By controlling the strength and angle of the joints, the bamboo people can jump.] 5. [Performance: You can combine multiple bamboo people to perform.] For example, he could make them dance, punch, run, and so on. In addition, there are some tips that can help you make and play bamboo people better. When cutting bamboo, a blade fixed to a vice could be used to cut bamboo more safely and accurately. When drilling, one could first use a small drill bit to make a preliminary hole, and then use a large drill bit to expand the hole diameter, so as to avoid cracking during drilling. When fixing the joint, some special glues or tools could be used, such as AM glue, Ugh glue, etc. In short, the bamboo man was an interesting toy. By controlling its joints and movements, one could create all kinds of interesting ways to play.
Bamboo seed water cultivation method
The bamboo seed water culture method was a method of putting bamboo seeds into water for cultivation. We can get some information about the cultivation method of bamboo seeds. According to the document [1], you can use wet tissue to germinate the bamboo seeds. First soak the seeds in water for 3-4 days, then cover the seeds with tissue, and wait for the seeds to germinate before planting. In document [6], it was mentioned that the bamboo seeds needed to be soaked in water for 24 hours in advance and then scattered into the soil. According to the document [8], the temperature and humidity needed to be controlled to keep the soil moist. In summary, the cultivation method of bamboo seeds included soaking the seeds before planting, and maintaining a suitable temperature and humidity.
Potted Cultivation Method and Technique of Bamboo
There were two main ways to plant potted bamboo: sowing and splitting. If you choose to sow, you can collect mature seeds from October to November and then sow them when the temperature rises in spring. Sow the seeds evenly in the fertile and loose soil, and then keep the soil moist. In addition, the martial bamboo could also be planted by dividing the plants. The plants could be separated and replanted when the pots were changed. Whether it was sowing or splitting, it was necessary to choose fertile and loose soil and maintain suitable temperature and light conditions. At the same time, replenishing water and applying fertilizer regularly were also important techniques for potted bamboo planting.