The bamboo seed water culture method was a method of putting bamboo seeds into water for cultivation. We can get some information about the cultivation method of bamboo seeds. According to the document [1], you can use wet tissue to germinate the bamboo seeds. First soak the seeds in water for 3-4 days, then cover the seeds with tissue, and wait for the seeds to germinate before planting. In document [6], it was mentioned that the bamboo seeds needed to be soaked in water for 24 hours in advance and then scattered into the soil. According to the document [8], the temperature and humidity needed to be controlled to keep the soil moist. In summary, the cultivation method of bamboo seeds included soaking the seeds before planting, and maintaining a suitable temperature and humidity.
The correct method of cultivating the dragon bamboo in water culture included the following points: First, choose pure water or tap water that had been left to dry as the water source for cultivating the dragon bamboo, and change the water every 5 to 7 days. Next, he added two to three drops of nutrient solution every ten days to provide nutrients. In winter, you should pay attention to heat preservation. Do not raise the dragon bamboo in an environment below 15 ° C. When cutting, he chose the dragon bamboo with green leaves and thick stems. He removed the leaves at the bottom and cut the bottom of the stem into a smooth slanted mouth shape, which was beneficial for the dragon bamboo to absorb water and nutrients. It was best to leave the tap water in the container for a day or two before using it as a medium. Before taking root, the water should be changed frequently, usually once every three or four days. Be careful not to move the dragon bamboo in the water or apply fertilizer. After taking root, do not change the water completely. As long as you see that the water has evaporated, add more water on top of the original water. In addition, the reproduction method of the aquatic dragon bamboo could be carried out by cutting. The strong and disease free dragon bamboo branches could be selected as the cutting. The cutting length was 5-10 cm, and there were three internodes at the end. The soil with good ventilation, loose and drainage was used as the cutting medium, and the depth of the cutting was about one-third of the cutting. Pay attention to keeping the water clean, change the water regularly, and add an appropriate amount of nutrient solution to the water. Place it in a position to avoid direct sunlight and electrical radiation, and maintain a suitable temperature.
The potted planting method of Wu Zhu mainly included the following steps: 1. [Soil selection: Wu bamboo prefers fertile and loose soil. You can choose garden soil for planting.] 2. [Sowing: You can buy bamboo seeds or use mature seeds to sow.] The seeds needed to be soaked in clear water for 24 hours in advance and then evenly scattered in the soil. 3. [Temperature-control: Wu Zhu likes a warm environment. The most suitable temperature range is 20 - 30 ° C.] When potted plants were planted, the plants could be placed indoors to maintain a constant temperature and timely replenishment to promote rapid growth. 4. Illumination conditions: sufficient illumination is crucial for the growth and development of the bamboo. However, when the summer sun was strong, one needed to be careful to avoid being exposed to the sun. The plants can be moved to a cool place after four hours of light per day. 5. " Fertility: During the growth period of the bamboo, apply fertilizer every 3 to 5 days to help the healthy growth of the plant. 6. " Replenish water: Wu bamboo has the ability to store water, so during daily maintenance, it is only necessary to keep the soil slightly moist. In summer, watering can be carried out according to the humidity of the surface layer of the soil. To sum up, the potted planting method of bamboo included choosing suitable soil, sowing seeds, controlling the temperature, providing appropriate light, applying fertilizer, and replenishing water. Through proper maintenance, the martial bamboo could grow healthily.
The cultivation method of martial bamboo included choosing a suitable environment, selecting suitable seedlings, formulating a reasonable maintenance plan, and trimming in time. When choosing a planting location, you should choose a place with sufficient sunlight, good ventilation, and good drainage. When selecting seedlings, choose seedlings with straight stems and complete plant shapes, and pay attention to checking whether there are pests and diseases. Making a reasonable maintenance plan included scientific planning of watering time and quantity, reasonable arrangement of fertilizer time and fertilizer dosage. During the growth of the martial bamboo, it needed to be trimmed appropriately to control the height and number of stems to ensure that the plant shape was beautiful and the leaves were lush.
The cultivation and management method of Wu bamboo included the following steps: 1. Choose the right soil: The bamboo is suitable for growing in fertile and loose soil. You can choose garden soil or add rotten leaf soil and sand to improve the soil texture. 2. [Sowing: You can buy bamboo seeds or use mature seeds to sow.] After soaking the seeds in water for a day, they were scattered on the surface of the moist soil and covered with a thin layer of soil. 3. [Temperature-control: Wu bamboo likes a warm environment. The suitable growth temperature is 20 to 30 degrees Celsius.] It needed to be properly shaded in summer and maintained at an environment above 5 ° C in winter. 4. Illumination conditions: provide sufficient light for 4 hours a day, but avoid exposure to the sun. In the hot summer, the plants needed to be shaded. 5. [Watering: Wu bamboo has the ability to store water, so it can maintain the soil moisture.] In summer, watering can be done according to the humidity of the soil surface to avoid excessive watering that will cause the roots to rot. 6. Fertility: During the growth period of the bamboo, apply fertilizer once every 3 to 5 days. Different types of fertilizers needed to be applied in different seasons. The compound fertilizer of nitrogen and potassium should be applied once every half a month. To sum up, the cultivation and management methods of bamboo included the selection of suitable soil, sowing, temperature control, lighting conditions, watering, and fertilizer.
There were two main ways to plant potted bamboo: sowing and splitting. If you choose to sow, you can collect mature seeds from October to November and then sow them when the temperature rises in spring. Sow the seeds evenly in the fertile and loose soil, and then keep the soil moist. In addition, the martial bamboo could also be planted by dividing the plants. The plants could be separated and replanted when the pots were changed. Whether it was sowing or splitting, it was necessary to choose fertile and loose soil and maintain suitable temperature and light conditions. At the same time, replenishing water and applying fertilizer regularly were also important techniques for potted bamboo planting.
The maintenance methods of bamboo included the following aspects. First of all, the bamboo had a strong demand for light. It liked a bright environment, but it was not resistant to direct sunlight. Secondly, the bamboo liked a warm environment. The suitable growth temperature was around 18 ° C to 28 ° C to avoid large temperature changes. In addition, the bamboo had a moderate requirement for moisture. It could not be too dry or moist. It could be maintained in a moderate moist state. In addition, the bamboo required soft and fertile soil, so applying an appropriate amount of liquid fertilizer every once in a while could promote its growth. In terms of trimming, it was necessary to remove the withered leaves in time to maintain the health of the entire plant. At the same time, it was necessary to trim the leaves to maintain the orderly growth of the branches and leaves. In general, the maintenance methods of the bamboo included suitable light, temperature, moisture and nutrition, as well as timely trimming.
There were two ways to breed bamboo: sowing and splitting. Sowing and reproduction was to collect mature seeds from October to November, then place the seeds in a pot and wait for them to germinate. Sub-plant reproduction was to split an adult bamboo plant into several smaller plants and then replant them in flower pots or gardens. These methods required suitable temperature, humidity, and light conditions to ensure the growth of the bamboo.
Bamboo seeds were usually planted in December, and could be harvested when the color of the seeds changed from green to red. However, the seeds should not be sown immediately. Instead, they should germinate in a warm environment. Generally speaking, in spring and autumn, when the temperature exceeded 25 ° C, sowing could increase the survival rate. Therefore, the time to plant bamboo seeds was in spring and autumn, when the temperature exceeded 25 degrees Celsius.
According to the search results provided, the following conclusions can be drawn: The planting method of Pyrethrum included determining the planting location, preparing seeds and soil, sowing, management and maintenance, and controlling pests and diseases. The planting site should be chosen to have sufficient sunlight, good drainage, and fertile soil. It was best to plant in a place with sufficient sunlight and good ventilation. The seeds needed to be soaked in cold water for 12 hours in advance to speed up their sprouting. Then, they needed to choose loose, fertile, and well-drained soil. They could be improved by adding organic fertilizer to the soil. When sowing, the seeds were evenly spread on the surface of the soil, covered with a layer of soil, and maintained an appropriate distance. Pyrethrum needs sufficient sunlight and water during its growth period, but excessive watering should be avoided and regular fertilizers should be applied to provide nutrients. At the same time, attention should be paid to supporting and trimming the plants to promote healthy growth. Pyrethrum itself had the effect of killing insects and could control pests and germs such as aphids and mildews. As for the planting time, it would vary according to the climate of different regions. Generally speaking, Pyrethrum seeds were most suitable to be sown from March to May in spring and August to October in autumn. These two periods of time could meet the growth needs of the Pyrethrum seeds. However, in some special cases, the sowing time of Pyrethrum could be carried out between January and October, depending on the local climate conditions. In summary, the seed planting method of Pyrethrum included determining the planting location, preparing the seeds and soil, sowing, management and maintenance, and controlling pests and diseases. The best sowing time was from March to May in spring and August to October in autumn, which could be adjusted according to local climate conditions.
The maintenance methods of the green bamboo included choosing suitable soil, watering it reasonably, and paying attention to light. Green bamboo was suitable to be planted in loose, fertile, and well-drained soil. It was best to plant it in acidic sandy soil. When planting, pay attention to the drainage and ventilation of the soil to avoid long-term accumulation of water. In terms of watering, the Four Seasons Green Bamboo did not have a particularly high demand for water. It only needed to be watered once every two days to keep the soil moist but not accumulate water. In the rainy season or when there is water accumulation, it should be drained in time. In terms of light, the green bamboo liked sunlight, but it could not be exposed to strong light for a long time. It was best to maintain it in a semi-yin environment. In addition, pay attention to fertilizer, apply fertilizer three times a year, spring, summer, and winter. In short, the maintenance of the green bamboo needed to pay attention to the selection of soil, reasonable watering, and appropriate lighting.