Fixing method of bamboo with screw
The following fixing methods can be used to fix the bamboos together: First, special screws can be used to fix the bamboo flooring to the keels to ensure that the screws are evenly distributed and vertically fixed. In addition, special connecting pieces could be used to connect the edge of the floor to the knight board to enhance the stability of the floor. The other method was the floating installation method, which was to use the mortise and groove between the bamboo flooring boards to bite each other. There was no need to use glue or nails to adapt to the changes in the outdoor environment. In some cases, it is also possible to use a floor glue to stick the bamboo flooring to the ground, but you need to ensure that the ground is flat and dry, and use a special floor glue. It should be noted that when installing outdoor bamboo flooring, the first thing to do is to do the basic treatment work to ensure that the ground is flat, clean and dry. As for the method of fixing the bamboo to the wall, he could use nails or screws to fix the bamboo directly to the wall and add appropriate support around it. In summary, you can use screws to fix the bamboos together, but you need to pay attention to the use of appropriate screws and fixing methods.
Illustration of bamboo fixing method
There were many ways to fix bamboo pieces. The following were some common methods: 1. [Binding method: You can use rope or thread to bind it.] He first marked the places that needed to be connected, then cut out a part that could be inserted into another bamboo, connected them together, and tied them up. 2. Plugging method: First, you need to cut off some bamboo skin at both ends to form a plug-like tip, trying to preserve the integrity of the bamboo piece as much as possible. Then, he connected the two bamboos together and inserted the peeled end into the other bamboo. Use glue, cement, or other materials to fix it. 3. [Buried head cap method: suitable for thicker bamboo.] He first made one end into a cylinder (also known as a "cap"), then cut a matching notch on the bamboo at the other end. Finally, he fastened the cap on it and secured it tightly with a tool. 4. Screw fixing method: You can use a screw to fix the bamboo pieces together. First, he laid down half of the bamboo piece, then passed the bamboo piece through the fixing incision, and then laid down half of the bamboo piece. Every five pieces were fixed once, and they were fixed with screws. These methods could be chosen according to actual needs and application scenarios.
Nail for fixing bamboo chips
The fixing nails of bamboo chips were also called bamboo nails. They could be divided into two types according to their different uses: pressing nails and bolt nails. The pressing sheet nail was used to cooperate with the pressing sheet to fix the bamboo surface, while the bolt supporting nail was used to support the bolt position, such as the bottom of each wall on the support, to bear the seat force of the wall and fix the position of the wall. In addition, the bolt also secured the relevant tenon and mortise parts. The bamboo nails were generally cut into the shape of a round rod with a big top and a small bottom. Ming Dynasty furniture was often drilled with small bamboo nails from the mortise and tenon to strengthen it. The shape of the bamboo nail was required to be big at the top and small at the bottom. The cut surface was straight, the cross section of the bamboo green was slightly narrower than the bamboo yellow, and the wall thickness was equal to the width of the bamboo green surface. The specific specifications varied according to the use.
Method of Maintaining Bamboo
The maintenance methods of bamboo included the following aspects. First of all, the bamboo had a strong demand for light. It liked a bright environment, but it was not resistant to direct sunlight. Secondly, the bamboo liked a warm environment. The suitable growth temperature was around 18 ° C to 28 ° C to avoid large temperature changes. In addition, the bamboo had a moderate requirement for moisture. It could not be too dry or moist. It could be maintained in a moderate moist state. In addition, the bamboo required soft and fertile soil, so applying an appropriate amount of liquid fertilizer every once in a while could promote its growth. In terms of trimming, it was necessary to remove the withered leaves in time to maintain the health of the entire plant. At the same time, it was necessary to trim the leaves to maintain the orderly growth of the branches and leaves. In general, the maintenance methods of the bamboo included suitable light, temperature, moisture and nutrition, as well as timely trimming.
Breeding Method of Bamboo
There were two ways to breed bamboo: sowing and splitting. Sowing and reproduction was to collect mature seeds from October to November, then place the seeds in a pot and wait for them to germinate. Sub-plant reproduction was to split an adult bamboo plant into several smaller plants and then replant them in flower pots or gardens. These methods required suitable temperature, humidity, and light conditions to ensure the growth of the bamboo.
Method for making bamboo man
The method of making bamboo people was as follows: First, prepare a thick bamboo and some tools, such as saws, knives, sandpaper, rulers, etc. He chose a piece of bamboo with a higher degree of aging and a harder texture. This way, the bamboo people he made would be stronger and more durable. Then, he used a saw to cut the bamboo into sections of appropriate length, each section about 10-15 cm long. Next, use a knife or sandpaper to polish the two ends of the bamboo section, and use a ruler to ensure that the length and width of each bamboo section are the same. He drilled a hole in the middle of each bamboo section, then inserted a small bamboo section as a joint, and fixed the joint with glue or bamboo nails. Assembling all the bamboo sections together to form a body shape, and using glue or rope to fix them together. Finally, he added details as needed, such as hands, feet, and head. You can use a knife or carving tool to carve details on the bamboo section, or you can use paint or colored tape to decorate it.
Bamboo Splices Connection Method
There were many ways to connect the bamboo pieces, and the specific choice depended on the actual application scenario and requirements. A common method was binding. One could use a rope or thread to bind two bamboos together and tie them up. The other method was the inserting method, which required the bamboo skin to be cut off at both ends of the bamboo piece to form a plug-shaped tip. Then, the two bamboos were connected and fixed with glue, cement, or other materials. Another method was to bury one's head in the cap, which was suitable for thicker bamboo. First, one end was made into a cylindrical cap, then a notch was cut on the other end of the bamboo, and finally the cap was fastened on it. Other than that, there were also other methods of joining, such as the joint between bamboo and bamboo, and the connection structure of round bamboo furniture. In short, choosing a suitable bamboo connection method needed to consider the thickness of the bamboo, application scenarios, requirements, and other factors.
Illustration of the trimming method of bamboo
The method of trimming bamboo included the following steps: 1. Topping the top during the seedling stage would remove the top branches of the plant. Topping could be done many times to control the growth height and promote the growth of side branches. 2. Cut off the withered leaves and pests in time to avoid affecting the growth. 3. Cut the branches and leaves that are too dense, remove the branches that are too dense, the branches that are inside the chamber, and the cross-branches, so that the remaining branches and leaves have enough space to grow and increase the light transmission and ventilation. 4. For long branches, they could be cut short to maintain the overall beauty of the plant. Please note that the above answers are summarized based on the search results provided. There may be other details that need to be referred to for the specific trimming method.
Binding method of bamboo frame
There were several common methods to tie bamboo shelves. The first was the single circle method, which was suitable for situations where the diameter of the bamboo pole was not large. This method was to cross two bamboo poles, then pass one bamboo pole from the top to the bottom of the other bamboo pole, and then pass from the bottom to the top of the other bamboo pole to form a ring, and then pull the ring down. The second method was the double-circle method, which was suitable for bamboo poles with larger diameter. This method was to hold two crossed bamboo poles in one hand, then pass one bamboo pole from the top to the bottom of the other bamboo pole, and then from the bottom to the top of the third bamboo pole, forming a ring. Then, the ring was pulled down again, and the ring was pulled up again to pass under the third bamboo pole, forming a second ring. Finally, the ring was pulled tight. In addition, there was also the cross-knot binding method that was suitable for specific needs. For specific details and steps, you can refer to the provided document.
Cultivation method of martial bamboo
The cultivation method of martial bamboo included choosing a suitable environment, selecting suitable seedlings, formulating a reasonable maintenance plan, and trimming in time. When choosing a planting location, you should choose a place with sufficient sunlight, good ventilation, and good drainage. When selecting seedlings, choose seedlings with straight stems and complete plant shapes, and pay attention to checking whether there are pests and diseases. Making a reasonable maintenance plan included scientific planning of watering time and quantity, reasonable arrangement of fertilizer time and fertilizer dosage. During the growth of the martial bamboo, it needed to be trimmed appropriately to control the height and number of stems to ensure that the plant shape was beautiful and the leaves were lush.
Method for connecting bamboo chips and bamboo chips with a bayonet
There were many ways to connect bamboo chips, and one of the most common methods was to connect them with a bayonet. The bayonet was a metal joint that could be used to secure the connection. However, there were some problems with the use of nails when making bamboo products, such as high cost, metal scraps that polluted the environment, and the lack of coordination with bamboo chips. In order to solve these problems, someone proposed an eco-friendly, low-cost bamboo nail suitable for connecting and fixing bamboo chips. The bamboo nail consists of a bamboo nail, a bamboo nail body and a bamboo nail tip in turn along the length direction. The shape of the bamboo nail cap can be a hemisphere, a round table or a polyhedron, and the thickness is generally 2-5 mm. This method of bamboo nail connection could play an auxiliary role in fixing, and the bamboo needed to be punched in advance before use. In summary, the bamboo strips could be connected by this kind of eco-friendly bamboo nail.