The method and time of planting begonia flowers
The method and time of planting crabapple flowers would vary according to the source. The planting time of crabapple flowers was generally suitable for planting in spring and autumn. It could be specifically selected between April to May or October to April of the following year. Planting methods included choosing suitable soil and environment, watering and fertilizing appropriately, controlling pests and diseases, trimming and maintenance, etc. Begonia flowers liked to grow in fertile and well-drained soil. They could choose loose soil that was rich in organic matter. Before planting, decomposed organic fertilizer and fine sand could be added to the soil to improve soil fertility and breathability. Begonia flowers had high requirements for water, but they could not be overwatered. Generally, they should be watered 2-3 times a week to keep the soil moist. In terms of fertilizer application, you can choose organic fertilizer or compound fertilizer to apply. You can apply fertilizer once or twice a month, and pay attention to avoid excessive fertilizer application. Begonia flowers were susceptible to pests and could be controlled with appropriate pesticides. The trimming of crabapple flowers could promote the growth of its branches and flower buds. It was usually trimmed in spring and autumn. In general, the planting method and time of crabapple flowers needed to be adjusted and selected according to the specific situation.
Joy of Life
Begonia planting method
The planting method of crabapple flowers included the following steps: 1. Choose suitable soil: Begonia flowers like to grow in well-drained, loose soil. The most suitable soil has a pH of 6.5-7.5. 2. Choose the right place: Begonia flowers like sufficient sunlight and can also withstand shade. When planting, choose a place with more sunlight in the morning or evening to avoid too strong sunlight at noon. 3. Planting season: The suitable planting season for crabapple flowers is spring or autumn. The temperature in these two seasons is suitable, which is conducive to the growth of crabapple flowers. 4. Prepare the soil and transplant the crabapple: Dig a pit of suitable size, soften the soil, and add an appropriate amount of decomposed organic fertilizer. He transplanted the begonia flower seedlings into the pit, paying attention to keeping the flower roots intact. He buried the flower roots with soil and patted them gently. To sum up, the planting method of crabapple flowers included the selection of suitable soil and location, the selection of planting season, and the steps of preparing the soil and transplanting crabapple flowers.
Begonia planting method precautions
The planting methods and precautions of crabapple flowers included the following points: 1. Soil selection: Begonia flowers like to grow in loose, fertile, and well-drained soil. You can choose rotting soil or garden soil, and add an appropriate amount of fine sand to improve the soil's breathability and drainage. 2. Illumination and temperature: crabapple flowers like a semi-cool environment. The suitable lighting conditions are sufficient but not too strong. In terms of temperature, the most suitable growth temperature for crabapple flowers was 15 - 28 ° C. Too high or too low temperature would affect the flowering period and the number of flowers. 3. Watering management: Begonia flowers have a high demand for water, but they must also avoid excessive watering that will cause water to accumulate at the roots. During the growth period, it was enough to keep the soil moist. When the temperature was high in summer, the watering frequency could be increased. In winter, the watering amount should be reduced to avoid the soil being too moist. 4. " Method of applying fertilizer: When crabapple flowers germinate and fall leaves, some organic fertilizer needs to be applied. You can choose decomposed organic fertilizer or special fertilizer. The frequency of fertilisation could be done once every half a month, using thin liquid fertilizer or cake fertilizer water. 5. [Cutting and trimming: Begonia flowers need to be properly trimmed and trimmed during their growth period. It can remove sick and bad branches to promote branches and healthy growth.] At the same time, trimming the flowers that had already bloomed in time was beneficial to the healthy growth of the plants. 6. Pest control: Begonia flowers are susceptible to rust, aphids, thorn moths and other pests. The corresponding medicaments could be used to control it. For example, the Pomeranian 0.5% sulfur mixture could be used to control rust, and the wetting powder could be used to control pests such as aphids and red spiders. In short, the planting of crabapple flowers needed to pay attention to soil selection, light and temperature management, watering and fertilizer methods, trimming and trimming, pest control and other aspects. Through reasonable management and care, the crabapple flower could grow healthily and bloom beautiful flowers.
Begonia flower planting method Begonia flower
The planting method of crabapple flowers included choosing suitable soil and lighting conditions, reasonable fertilizer and watering, timely trimming and pest control, and paying attention to the prevention and control of diseases. Begonia flowers liked to grow in fertile and well-drained soil, and could be improved before planting. At the same time, crabapple flowers needed sufficient sunlight, but they also needed to avoid direct sunlight. When applying fertilizer, choose organic fertilizer or compound fertilizer to apply fertilizer. Pay attention to controlling the dosage to avoid excessive fertilizer causing damage to the root system. Water the soil appropriately to keep it moist but not too wet. During the growth of crabapple flowers, they needed to be trimmed in time to maintain the beauty of the plant. Pay attention to retaining the trunk and healthy branches to avoid over-trimming. At the same time, they had to check and remove the pests on the flowers and leaves regularly, such as aphids and mites. Begonia flowers were susceptible to some diseases. They had to check the plants regularly and take corresponding prevention and control measures in time if they found diseases, such as spraying disinfectant and adjusting the environmental humidity.
Cutting method of begonia flowers
The method of cutting begonia flowers was to choose healthy branches, about 5-10 cm long, with two bud points on each section of the cutting. Cut the leaves in half to reduce the amount of steam. To prepare loose and airy soil, you can use three parts of turfy soil and one part of pearlstone to prepare the cutting medium. The bottom of the cutting was cut into an inclined plane, dipped in the rooting powder, and directly inserted into the matrix. The surrounding soil was compressed, and water was sprayed. The temperature was maintained between 18-20 ° C. With more ventilation, the cutting would take root very quickly.
The Cultivation Method of Begonia Flowers
The method of planting crabapple flowers included choosing the right soil and environment, watering and fertilizing appropriately, preventing pests, trimming and maintaining. Begonia flowers liked to grow in fertile and well-drained soil. They could choose loose soil that was rich in organic matter. At the same time, crabapple flowers also needed sufficient sunlight, so when choosing a planting location, one should choose a place with sufficient sunlight. Begonia flowers had high requirements for water, but they could not be overwatered. Under normal circumstances, they should be watered 2-3 times a week to keep the soil moist. In terms of fertilizer application, you can choose organic fertilizer or compound fertilizer to apply. You can apply fertilizer once or twice a month, and pay attention to avoid excessive fertilizer application. Begonia flowers were susceptible to pests such as aphids and red spiders, so they could be controlled with suitable pesticides. At the same time, crabapple flowers were also prone to diseases such as spores and powder, so they should be discovered in time and take corresponding control measures, such as spraying chemicals or cutting off the affected parts. The trimming of crabapple flowers could promote the growth of its branches and flower buds. It was usually trimmed in spring and autumn.
Planting method and management of coltsfoot flowers
The planting method and management of coltsfoot flowers were as follows: ** 1. Planting Method ** 1. ** Choosing the land and tidying it ** - Tussilago fara is suitable for planting in loose, fertile and moist surface and compact sandy loam or loam soil at the bottom. Sticky soil or low-lying plots that are prone to water accumulation are not suitable for planting. After the harvest of the previous crop, plow 20 - 25cm in time, apply high-quality decomposed farmyard manure, level and rake carefully, and open drainage ditches. Generally, no ridge shall be made. You can also choose fertile, damp and well-drained sandy soil. When preparing the land, apply more base fertilizers such as manure, manure, etc. After deep plowing, plowing and leveling shall be made into ridges. In low-lying areas, make high ridges and open drainage ditches. 2. ** Breeding Method ** - ** Root reproduction **: Root reproduction is generally used in production because seed reproduction has a long cultivation period and a short seed life. It can be planted in early winter (late October to early November) and early spring (early to mid-March). When harvesting, they could be dug and planted at the same time. In spring, they could also use wet sand to layer the roots harvested in winter and store them in the cellar. In spring, they could be taken out and planted. The roots should be thick and free of pests and diseases. Cut them into small pieces of 10 - 13cm long, and each section should have 2 - 3 buds. It can be planted in strips or holes. The row spacing of strip planting is 30cm, the depth of the ditch is 7 - 10cm, and a section of rootstock is placed every 10 - 13cm, and then covered with soil. The row spacing of hole planting is about 35cm, the distance between holes is 25cm, and the depth of holes is 7 - 10cm. Three sections of rootstock are placed in each hole, forming a "triangle" shape, and covered with soil. Generally, 30 - 35kg of seed roots are used every 667m. It can also be planted around the vernal equinox. The roots that are free of disease, thick and yellowish white can be selected from the stored roots, cut into small sections of 2 - 3 inches long, leaving 3 - 4 bud eyes in each section, ditch according to a certain row spacing, lay the roots flat at the bottom of the ditch according to the plant spacing, cover the soil and compact, or arrange the roots in a row according to a certain row spacing and plant spacing, and bury the roots in the ridge with a plow. - ** Seed reproduction (rarely used)**: When the winter flower seeds are ripe, pick the fruit, wrap it in paper, dry it in the sun, and rub off the crown hair. When raising seedlings, the winter flower seeds were evenly scattered on the prepared seedling bed, covered with a thin layer of fine soil with a sieve, and then covered with grass. After about a week, the seedlings would emerge. During the seedling stage, attention should be paid to weeding and watering appropriately. In the next year, the roots would be dug and transplanted. ** II. Management measures ** 1. ** Field Management ** - ** Replenishing seedlings **: After the seedlings are unearthed, if there are insufficient seedlings, they can be replanted with the sitting water method. - ** Inter-cultivation weeding and soil cultivation **: About 20 days after spring planting, seedlings should emerge. After the seedlings emerge, they should be weeding in time. Shallow inter-cultivation should be done to loosen the soil to avoid damaging the roots. If there is a lack of plants in the first cultivation, plant them as soon as possible. The second and third cultivation should be combined with soil at the base of the stem. In the first year, they generally did not apply topdressing. In the second and third years, when they cultivated the soil, they applied human and animal manure, cake fertilizer, etc.(The farmyard manure must be decomposed). The soil cultivation of Tussilago fara was generally carried out in three times. The first time was when the flower buds were not seen before the "White Dew", the soil was cultivated half an inch above the main stem, not covering the leaves; the second time was when the flower buds were just born, the method was the same as the first time; the third time was before and after the "Lidong", the whole plant of the winter flower was covered with soil. - "De-leafing for ventilation": When the temperature rises from June to July, the leaves of the coltsfoot flowers will spread too fast and too dense, affecting the ventilation and light transmission. Some of the old leaves or sick leaves at the base can be knocked off, and the dead leaves can also be cut from the base of the leaves (do not hurt the base). - ** Irrigate and drain **: Tussilago collaris likes moisture and hates drought, but is afraid of water accumulation. In the spring drought, water 2 - 3 times continuously to ensure that the seedlings are intact. In the rainy season, attention should be paid to drainage to prevent flooding. In the case of drought, watering must be done. In the case of waterlogging, drainage should be done in time. After the "beginning of autumn", it should be kept moist. In the bud stage, watering should be done at the right time to maintain the humidity of the ground. After especially hot rain, well water should be poured in time to reduce the temperature to prevent death. When planted in high and dry places, watering should be done appropriately to ensure survival. - ** Topdressing **: In the first year, no topdressing is usually applied. In the second and third years, the farmyard manure is applied in combination during the cultivation. After the beginning of autumn, 3000 - 4000 catties of pen manure or soil fertilizer were used per mu, sprinkled beside the plants, and then watered. After the autumnal equinox, 15 - 20 catties of carbamine were applied per mu to promote the growth of flower buds and increase yield. Spring and summer are not suitable for topdressing to avoid excessive growth of stems and leaves. 2. ** Pest Control ** - ** Disease ** - Brown spot disease: It is a common disease in summer, especially when it is sunny after the rain in summer and the water in the field is too wet. The pathogen harmed the leaves. The spots were nearly round, brown in the center and purple-red at the edges. Control methods include paying attention to drainage during the rainy season, spraying 1:1:100 Bordeaux mixture or 50% thiophanate-methylethalin wetting powder 1000 times at the early stage of the disease, or spraying 1:120 Bordeaux mixture or 500 times of wetting zineb before or at the early stage of the disease, every 7 - 10 days, several times in a row. - ** Sclerotinia rot **: easy to occur in high temperature and humid seasons. At the base of the infected plant, there were white fungi spreading upward, and black rat dung like scerotinia could be seen. The roots gradually rotted, causing the plant to wither. Rotation with gramineous plants should be carried out, with special attention to drainage; after seedling emergence, spray 5% ammine powder for prevention; immediately uproot the infected plants, shovel away the topsoil of the infected plants, and spray 50% thiophanate 500 times solution for disinfection. - ** Atrophy leaf disease **: The disease spots extend inward from the leaf edge, and the dark brown color is irregular, causing partial or whole leaves to wither. In serious cases, it can spread to the petiole. Control methods included cutting off dead leaves, clearing the garden after harvest, and eliminating the sick and disabled plants. In the early stage of the disease, Bordeaux mixture of 1:1:140 times or 500 times of zineb could be sprayed. - ** Insect pests **: Aphids harm the stems and leaves. During the occurrence period, spray 50% fenthiuron 100 - 200 times solution, 40% Dongguo 1500 - 2000 times solution or 80% Dichlorvos 1500 times solution for several consecutive times. Clean the garden in winter and remove dead trees and fallen leaves. The novel "Acanthus Flower Blossoms" is equally wonderful. Everyone is welcome to click and read it!
Cultivation method of herbaceous begonia flowers
The cultivation method of herbaceous begonia flowers included the following aspects. First, choose a suitable pot soil. Herbaceous crabapple flowers like to grow in loose, airy, and well-drained soil. They can be mixed with rotting soil, turf soil, and coarse yarn. Secondly, it was necessary to maintain a suitable temperature. Herbal crabapple flowers liked to grow in a warmer environment. In the summer, when the temperature was high, they should be moved indoors to a cool and airy environment. In winter, they should take warm measures to prevent freezing damage. In addition, herbaceous begonia flowers liked an environment with plenty of light. They needed 8-10 hours of light every day, but they had to pay attention to shade to prevent exposure to the sun. In addition, herbaceous begonia flowers do not like too humid environments. When watering them, they should be watered appropriately to avoid the water in the basin causing the roots to rot. It should be noted that herbaceous begonia flowers have low nutrient requirements and only need to be fertilized 1-2 times a year. Trimming was also an important step in the breeding process. It was necessary to trim dead branches, sick branches, and intersecting branches regularly to maintain the neatness and breathability of the plants. In general, the cultivation method of herbaceous crabapple flowers was relatively simple. One only needed to pay attention to the requirements of soil, temperature, light, watering, trimming, and so on.
Cultivation method of potted begonia flowers
The cultivation method of potted begonia flowers included the following points: First, choose soil with good ventilation and good drainage. You can use river sand, rotten leaf soil, wood chips, etc. to prepare the pot soil. Secondly, the begonia flowers liked light, but they should avoid exposure to the sun. They should be bred in a semi-humid and warm environment. Third, water the plants appropriately. During the sprouting period, the soil in the pot should be kept slightly dry. During the growing period, water the plants once every two days and often spray water around the plants, but avoid accumulating water. In addition, fertilizer was also an important step in breeding. Generally, it should be applied during the flowering and fruiting period to supplement nutrients and promote the expansion of the fruit. Finally, the plants were trimmed regularly to reduce nutrient consumption, which was beneficial to the growth and development of the plants.
Pyrethrum planting method and time
According to the search results provided, the planting method and time of Pyrethrum could be summarized as follows: Pyrethrum was usually planted in spring and autumn. The sowing time in spring was from March to May, and the sowing time in autumn was from August to October. According to the climate conditions of different regions, the sowing time would also be different, so it needed to be adjusted according to the specific situation. The method of planting Pyrethrum was relatively simple. It could be sown by sowing. First, the seeds were mixed with fine sand and scattered evenly in the soil. Then, he covered it with a layer of fine sand and watered it to keep the soil moist. After sowing, Pyrethrum needed to be watered appropriately to ensure sufficient moisture. It also needed to be trimmed to make it grow new buds and flowers. Pyrethrum liked to grow in a warm and humid environment and had certain requirements for the soil. It was best to choose fertile soil that was close to a water source and had watering conditions for planting. In summary, the planting time of Pyrethrum was generally selected in spring and autumn. The sowing method was broadcast sowing. It was necessary to keep the soil moist and carry out appropriate watering and trimming. In addition, Pyrethrum liked to grow in a warm and humid environment and had certain requirements for the soil.
The cultivation method of herbaceous begonia flowers is as follows:
The cultivation method of herbaceous crabapple flowers included the following points: First, choose suitable soil and environmental conditions. Herbal crabapple flowers liked to grow in fertile and well-drained soil. They could choose soil mixed with sandy soil and rotten leaf soil, and choose a sunny environment for cultivation. Secondly, reasonable watering and fertilizer. Herbal crabapple flowers had high requirements for water, but they could not be overwatered. Under normal circumstances, they should be watered 2-3 times a week to keep the soil moist. They should also choose organic fertilizer or compound fertilizer to apply. They should be applied 1-2 times a month to avoid excessive fertilizer. Third, timely trimming and prevention of pests and diseases. The herbaceous crabapple flowers grew rapidly and needed to be trimmed in time to maintain a neat shape, remove pests and withered parts, and regularly check whether they were harmed by pests and diseases. If pests and diseases were discovered, corresponding prevention measures should be taken in time. Finally, pay attention to the light and temperature requirements. The herbaceous crabapple flower likes sufficient sunlight, but it also needs to avoid exposure to the sun. At the same time, it needs to take measures to keep warm according to the temperature changes.