Chapter: 119
The principle of the antimatter atomic gun is very simple. It simply replaces the electrons emitted by the electron gun with antimatter atoms that have an additional charge.
For the capture and storage of antimatter atoms, Mark had already designed a mature set of devices while researching antimatter annihilation bombs. By combining them with the electron gun, the antimatter atomic gun was successfully completed.
Next, Mark fixed the completed antimatter atomic gun on a mechanical arm, allowing the engraving of magical symbols on the Uru metal to be performed using computer numerical control (CNC).
From the collected remains of the Destroyer, Mark selected two relatively regular-shaped metal fragments. He planned to engrave magical symbols on them to turn them into two magical energy poles.
The function of these two magical energy poles is similar to that of positive and negative terminals in a circuit. Mark would connect them to the collected Uru metal fragments and use the tremendous magical power generated to melt the Uru metal into a liquid state.
Then, using pre-prepared casting molds, the molten Uru metal would be cast and shaped into the components Mark needed.
However, before that, there was a preliminary step that needed to be completed, which was to clean off the residual runic symbols from the fragments.
The Uru metal fragments obtained from the Destroyer contained a large number of runic symbols. These symbols were used to set the various functions of the Destroyer and control its actions.
Due to the fragmented and mostly incomplete nature of the collected fragments, although a large amount of data was gathered, no useful information could be extracted at the moment.
The selected two fragments were fixed on a fixture, and the antimatter atomic gun was activated to begin the cleaning process. The entire process would take a considerable amount of time because the area of effect of the atomic gun was small, and each area needed to be cleaned repeatedly to completely remove the imprints of the symbols.
After completing this process, the next step would be the lengthy wait for the engraving of the symbols. Mark delegated these tasks to Baymax, and then entered the virtual laboratory to start designing the construction and integration of the nanorobots that would be injected into the body, along with various functional modules to be integrated on them.
On the following day, when Mark left the virtual laboratory to take a break, the production of the two magical energy poles had already been completed. Following Mark's pre-planned arrangements, Baymax had just melted all the Uru metal fragments into a liquid state using the magical energy poles and injected them into the prepared molds.
The molds did not have pre-reserved runic patterns. In order to ensure the precision of the symbols, Mark intended to use the atomic gun to engrave all the runic patterns, even if it took more time.
Mark's design for the device to purify and store Pym Particles was different from that of Dr. Pym. It was not divided into small doses but was a large-scale device with a huge capacity.
Dr. Pym chose a small-dose design for the Pym Particles considering the convenience of using them in the Ant-Man suit. However, Mark intended to use the Pym Particles for large-scale nanorobot manufacturing, making a high-capacity device more suitable.
Mark didn't pay too much attention to reshaping the Uru metal. Instead, he spent each day in the virtual laboratory, designing nanorobots or researching further applications of runic technology. His schedule was packed and fulfilling.
After living such a life for five days, Mark finally received the notification of victory. The Pym Particle preparation device had been assembled and passed functional testing, ready for official operation.
Upon receiving this news, Mark immediately exited the virtual lab and arrived at the company's underground production base.
Although the equipment had already passed Baymax's test run, Mark still wanted to witness the moment when his first runic technology device successfully produced Pym Particles with his own eyes...
He activated the device switch. Eighteen newly designed Ark reactors, connected in series, began to convert electrical energy into magical power to supply the preparation device.
On the preparation device, as magic continued to be injected, the runic symbols on its surface gradually emitted a faint blue glow. When all the symbols on the entire device were illuminated by magic, the values on the monitor changed.
The detector connected to the storage device displayed the presence of Pym Particles, which were now detected within the previously vacuum-sealed Uru metal box.
"Yes, it worked!" Mark exclaimed excitedly, pumping his fist and shouting in joy.
"Congratulations, Master. You have successfully utilized the new system to create Pym Particles," Baymax sensed Mark's jubilant emotions and promptly offered its congratulations.
"This is only the first step. I've already completed the design of the nanorobots. Once we have an ample supply of Pym Particles, I plan to start mass production. However, I've changed my mind a bit. This design is no longer sufficient for my requirements. I should integrate runic technology into it, making it the ultimate culmination of Earth's technology and runic technology."
"But, Master, after completing the current device, we have very little Uru metal left, and considering the losses during the manufacturing process..."Baymax didn't want to dampen its master's enthusiasm, but as its duty, it had to remind Mark.
Mark smirked, feeling somewhat proud, and said, "I've already thought of a solution for that just now..."
###
You can read +60 advanced chapters of this novel and advance chapters of my other novel "Famous Police Detective in Detective World" on my P@treon page for just $4!!
p@treon.com/Lightreaper457
Please support this translation project if possible!!
###