sdbh episode 38 reaction
What are the differences between the SDBH manga and its anime adaptation?
The main differences between the SDBH manga and anime lie in the way scenes are presented and the emphasis on certain plot points. Sometimes, the anime might add or omit certain elements to make it more suitable for the animation format and audience.
1 answer
2025-06-15 23:02
The audience's reaction in the last episode of Ghost Blade
Regarding the final episode of Ghost Blade, the audience's reactions were divided. Some of the audience felt that the last episode had reached a new height. For example, in the last episode of season four, the budget was skyrocketing. The storyboard, rhythm, music, fighting, and so on were all done in one go. The gorgeous architectural structure of the scene was amazing, making the old fans feel the same surprise and excitement as in the first season. However, there were also some viewers who expressed dissatisfaction. Some viewers felt that more than half of the time in the last chapter was given to the villain boss, and after the male lead appeared, he comforted people and started flirting with girls. In the end, he did not meet the villain. He even thought about whether things were threatening when he boarded the train, and there were situations where he delayed the time. Yan Zhu, who was sent to do the mission, might only have a minute of footage in the last episode, which was quite different from the plot that the audience was looking forward to. Judging from the voting results, only about 57% of the audience were satisfied with the ending. They felt that it was acceptable for reincarnation and descendants to end the game. However, there were also many audience members who felt that there were problems such as the foreshadowing, the forced assembly of the CP, the sudden good ending during the final battle, and the Millennium Boss being written as a tool.
1 answer
2026-03-30 20:51
The reaction phenomenon of the reaction of nitrates and the reaction of the reaction of the nitrates and the sodiums
The reaction between the acid and the acid would result in the formation of a sulfuric acid deposit. The reaction equation was Na Chi SiOx +2HNOOx == H Chi SiOx +2NaNOOx, and the reaction phenomenon was the formation of a white deposit. In this reaction, the sulfuric acid did not show any oxidisation, but only showed its acidic nature. This was because the silicon in the silica was already in the highest state, and the acidic nature of the sulfuric acid was stronger than that of the sulfuric acid, which was in line with the principle of making a weak acid from a strong acid.
<a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
1 answer
2026-08-07 12:39
Reaction equation phenomenon and explanation of the phenomenon of the reaction equation of the reaction of the reaction
There is no chemical reaction between NaCl2 and magnesiumcarbonate2.
In chemistry, the conditions for metathesis reactions to occur were the formation of precipitations, gases, or water. After mixing the two, the conditions for the metathesis reaction were not met, so there was no reaction, no reaction equation, and no reaction phenomenon.
<a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
1 answer
2026-07-15 14:10
What is the reaction of the aluminum thermal reaction? Is it an exhalation reaction?
Aluminiothermic reaction was a kind of oxide-reduction reaction between aluminum and metal or non-metal compounds at high temperatures. Aluminiothermic reaction was an exhaling reaction, and its heat release was very large, usually enough to heat the product above the melting point, and the reaction could generally occur locally and be self-sustaining. This characteristic also reflected the energy-saving characteristics of the reaction.
<a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
1 answer
2026-07-02 12:12
What is the reaction of the rearrange reaction?
Rearrangement reaction refers to the migration of certain atoms or groups in the molecules of organic compounds under certain reaction conditions, resulting in the reorganization of the molecular structure. For example, the Beckmann Rearrangement Reaction was a reaction in which ketoximes were rearranged into N-substituted diamides under the action of an acidic catalyst; the Cope Rearrangement Reaction was a (3,3)-sigma-shift rearranging reaction of 1,5 -diene; the Hofmann-Martius Rearrangement Reaction was a reaction in which N-alkylated aromatic compounds were rearranged to the corresponding o-/p-alkylated aromatic compounds under the action of acid catalyst; the Curtius Rearrangement Reaction was a type of nuclopathic rearrangements.
<a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
1 answer
2026-07-05 08:53
Reaction Formula of Substitution Reaction for the addition reaction of organic substances
Additional reaction:
- The addition reaction of ethene and Bromine: <<CH2 = CH2 + Br2>
- The addition reaction of ethene and hydrogen bromidate was as follows: <CH2 = CH2>
- Under certain conditions, addition reactions could also occur between ethene, hydrogen, and water. Since the chemical properties of ethyne (carbon-carbon triple bond) were similar to that of alkene (carbon-carbon double bond), similar addition reactions could also occur.
- The aromatic ring can undergo an addition reaction with hydrogen (in the presence of a catalyst such as Ni).
- Aldol groups can undergo a reduction reaction (addition reaction), such as: <anno data-annotation-id ="00000000 - 4c00 - 4c00 - 8c00 - 9c00 - 9c000b000000"> CH3CH20H </anno>.
Substitution reaction:
- The substitution reaction between methane and Cl2: CH4 + Cl2.
- The substitution reaction of the aromatic ring: For example, the substitution reaction with the aromatic group using FeBr3 as a catalyst; the nitration reaction with the aromatic group using concentrated sulfuric acid under heating conditions (the hydrogen on the aromatic ring is replaced by the nitrogen group).
- The substitution reaction of the halated carbon was as follows: <<CH3CH2Br2>+<NaBr2>>.
- The substitution reaction of alcohol: <CH3CH20H>+<br>> longrightarrow <CH3CH2br>+<H2O>>
- The ester's cleavage reaction (which can be seen as a substitution reaction):<CH3COOCH2CH3 + H2O>
<a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
1 answer
2026-07-13 20:02
Distinguishing Fever Reaction and Hemolytic Reaction
Fever usually occurred within 1 - 2 hours after blood transfusion. It was often accompanied by chills or chills, followed by high fever. The body temperature could reach 39 - 40 ° C, accompanied by skin flushing and headache. Most of the blood pressure did not change. The symptoms lasted for less than 10 minutes and relieved after 1 - 2 hours. Some patients might be accompanied by nausea, vomiting and other symptoms. Most hemolytic reactions were caused by the transfusion of abnormal blood. The typical symptoms were shock, chills, high fever, difficulty breathing, back pain, precordium pressure, headache, hemoglobinuria, abnormal bleeding, and so on, which could lead to death. The only early signs of surgery patients under anesthesia were wound bleeding and low blood pressure. Compared to hemolytic reactions, fever reactions during blood transfusion were usually milder, but hemolytic reactions were more serious and even life-threatening. In addition, from the mechanism of the fever reaction, it was different from the hemolyzed reaction. The hemolyzed reaction was an acute immune transfusion reaction caused by the reaction of the transfused red blood cells (a few of which were the red blood cells of the recipient) with the corresponding red blood cell allo-antigen-like body of the recipient. In terms of treatment, there were also differences between the two. Blood transfusion should be stopped immediately for fevers, and heat preservation should be given when shivering, and fever should be treated with antipyretic treatment. For hemolytics, more complicated and urgent treatment measures should be carried out according to the specific situation, such as dealing with possible serious consequences such as shock and acute kidney failure.
<a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
1 answer
2026-07-01 16:36
The Determination of Reaction Rate and Reaction Constant
The chemical reaction rate represented the speed of the chemical reaction, which was the rate of change of the reaction progress with time or the reaction progress of the chemical reaction in unit time and unit volume. The average reaction rate was the decrease of the concentration of the reagent or the increase of the concentration of the product in unit time. The instantaneous reaction rate was the limit of the average reaction rate that approached zero. The reaction rate constant represented the chemical reaction rate at a unit concentration. It was independent of the concentration, but it was affected by factors such as temperature, catalyst, and solid surface properties. Usually, the larger the reaction rate constant, the faster the reaction would proceed.
There were two common methods to measure chemical reaction rates: chemical and physical methods. The chemical method used chemical analysis to directly measure the change in the concentration of the reagent or product over time to obtain the chemical reaction speed. However, the chemical analysis speed might not be able to keep up with the reaction speed and affect the measurement results. However, it could provide an absolute concentration value. The physical method was more extensive and convenient. It was to determine the reaction speed based on some physical properties that changed with the reaction, such as the pressure method, the distension meter method, or the volume method; the optical rotatory method, the interference method, the chromicity method, and the spectrophotosity method; and the electrical property method, such as the conductivity method, the potential method, the polarography method, the dielectrical constant method, and the mass spectrum method.
As for the determination of the reaction constant, for example, in the experiment of determining the rate constant of the fading reaction by the method of the catalyst, based on the principle of the catalyst kinetic method, the reaction system of the fading reaction of the Evans Blue by the reaction of the potassium bromate under the action of the NaNO3 was proposed. The corresponding chemical reaction rate constant was calculated by measuring the change of the absorption of the reaction system at different initial concentration and temperature. In terms of specific operations, the stock solution of the relevant reagents was first prepared, and then the reagents were added into the color-measuring tube according to a certain order and dosage. The timing and volume were started, and then the absorption curve was measured. The reaction constant was determined by preparing reaction solutions of different compositions, adding the solution after reacting for a period of time to stop the reaction, and taking a sample to measure the absorption curve. Finally, the concentration of other components was maintained at a constant temperature, and the change of the light absorption with time when different amounts of the solution of bromate or the solution of NaNO3 were measured, as well as the change of the light absorption with time when the specific amount of the solution of NaNO3 was measured at different temperatures.
<a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
1 answer
2026-07-02 03:36
chloridizing reaction and oxidization reaction conditions
Chloration reaction conditions:
- Hot chloridizing: Heat energy is used to stimulate Cl2 to generate a free radical of chloridize, which then reacts with the carbon molecules to form a chloride-containing compound. In the industrial thermal chloridizing process, the ratio of Cl2/CH2 is 1:3 - 4, and the main products are CH Cl2 and CH2 Cl2. Too much Cl2 is easy to explode. The reaction mechanism is a free radical chain reaction, and the composition of the product is related to temperature.
- Photo-chloration: Light (commonly used as a light source) is used to excite Cl2 to generate a free radical of Cl2, which then reacts with a hydrogen atom to form a chloride-containing compound. The process is carried out in a liquid phase under mild reaction conditions.
- The method of chloridizing by using a catalyst was divided into two types, namely, the uniform and the non-uniform ones. For example, some reactions required high temperature, high pressure, and a catalyst. The ore chloridizing reaction required high temperature, high pressure, and a catalyst. The reaction products were metal chloride-like and hydrogen chloride-like gases. The reaction principle was that the metal elements would undergo an oxido-reduction reaction with the hydrogen. Some organic compounds needed iron and other catalyst for the chloridizing reaction. For example, in the presence of iron catalyst, hydrogen was replaced by chloridize to form chloridize.
- For the chloridizing reaction of a specific substance, for example, the preparation of the chloridizing reaction.
Oxidation reaction conditions:
- [Ores are usually oxided under normal temperature and pressure. The speed and degree of oxidisation are affected by factors such as temperature, humidity, and oxygen concentration. It usually occurs on the surface of ores, causing changes in physical properties such as color, hardness, and density.]
- For the thermal reaction of DCl2 in a hydrogen/oxygen mixture, the reaction was carried out in a tube-flow reactor according to the basic thermochemical principles, and the thermal cracking reaction was also studied in the tube-flow reactor.
- For the reactions related to propene, it was necessary to prevent local high temperatures and high local Cl2 concentration. Among the reactions of the unsaturation, there were reactions such as the production of 1,2 -diclorethlene from ethene, and the synthesis of ethyne into ethene. The purpose of the oxification of ethene was to utilize the use of the Cl2.
<a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
1 answer
2026-08-20 16:21
Popular Answers
Popular Searches
a
b
c
d
e
f
g
h
i
j
k
l
m
n
o
p
q
r
s
t
u
v
w
x
y
z