Doomsday Basement ConstructionThe following are some key points regarding the construction of the Doomsday Basement:
** 1. Site Selection and Digging **
1. ** Safe location **
- He had to consider the geological stability and avoid choosing areas that were prone to landslides, mudflows, or unstable geological structures such as karst caves underground. For example, in an earthquake-prone area, one had to stay away from fault zones.
- Stay away from areas that may be affected by floods and tsunamis. If you are close to water, make sure the terrain is high enough to prevent floods from pouring into the basement.
2. ** Digging depth and size **
- The depth would depend on the specific needs and the target to be protected. If it was to resist radiation, it might need a deeper depth, usually 5 - 10 meters underground or even deeper, but digging too deep would increase the difficulty and cost of construction.
- The size of the building would be decided according to the number of people living there and the amount of supplies stored. For example, to accommodate a family (assuming 5 - 10 people) and store enough food, water, and other supplies for more than half a year, it might require dozens of square meters of space.
** 2. Construction and Materials **
1. ** Stable structure **
- Use a sturdy structural design, such as reinforced concrete structure. The walls, ceiling, and floor needed to be thick enough to withstand external pressure. The thickness of the walls could be 30 - 50 cm or even thicker.
- Consider reinforcement measures, such as adding steel beams at key locations to cope with possible earthquakes or other external forces.
2. ** Material Selection **
- The concrete should be of high strength and impenetrable to ensure the tightness and structural strength of the basement.
- The specifications of the steel bars must be determined according to the structural calculation to ensure that they can withstand the expected load.
** 3. Water-proof and damp-proof **
1. ** Waterproofing **
- Multi-layered waterproof treatment was done on the exterior walls and floors, such as laying waterproof coiled materials first and then applying waterproof paint.
- The joints of the basement should be sealed with special sealing materials to prevent moisture from seeping in.
2. ** Moisture-proof measures **
- On the surface of the basement walls and floor, a moisture resistant layer could be laid, such as a moisture resistant film or a moisture resistant brick.
- To install moisture removal equipment, such as a moisturizer, to control the humidity in the room.
** IV. Air ventilation and purification **
1. ** Venting System **
- A well-designed ventilation duct can adopt a combination of natural ventilation and mechanical ventilation. The natural ventilation should be well protected to prevent rain and foreign objects from entering; the mechanical ventilation equipment should have a backup power supply to ensure that it could operate normally in the event of a power failure.
- The amount of ventilation should be calculated according to the number of people living and the size of the space to ensure the freshness of the air.
2. ** Air Purification **
- The installation of air purification equipment that could filter dust, bacteria, harmful gases, etc., such as activated carbon filter, high efficiency air filter (HEPA), etc.
** 5. Living facilities and material reserves **
1. ** Living facilities **
- Basic living facilities such as beds, kitchen equipment (stove, cutlery, etc.), and sanitary facilities (toilet, shower equipment, etc.) were provided.
- In terms of power supply, there must be a backup generator and sufficient power storage equipment (such as batteries) to meet the use of lighting and electrical equipment.
2. ** Material Reserve **
- Store enough food and choose nutritious food with a long shelf life, such as canned food and dry food.
- A large amount of clean water should be stored, and water purification equipment should be installed to ensure the sustainable use of water resources.
- Storage of medical supplies, including commonly used medicines, first-aid equipment, etc.
Click on the link below to read the comic "The System Sent Me a Sanctuary"
Basement construction process videoIn the reference, there was a video titled "74 episodes| The most detailed construction process #Record real life #My village life #Self-built houses in the countryside "may contain video content related to the construction process of the basement, but it cannot be provided directly. It is recommended to search for relevant keywords (such as the basement construction process) on the TikTok platform to obtain more videos of the construction process.
Click on the link below to read the comic "The System Sent Me a Sanctuary"
Is the basement safe?The safety of the basement was relative and affected by many factors.
From the perspective of structural safety, if the basement strictly adhered to the safety design specifications during the construction process, the corresponding standards were formulated according to the comprehensive factors such as the use, location, and building area of the basement, and the construction was strictly carried out, the structural safety could be guaranteed.
In terms of fire safety, the fire resistance level of the equipment and goods in the basement must comply with national regulations, and regular inspections and fire drills should be strengthened. The power supply line should be subject to fire protection treatment and regular inspection and maintenance to ensure normal power supply to avoid damage to electrical equipment and electric shock accidents.
As for the safety management of the drainage and ventilation systems, since these two systems were very important to the basement, they needed to clean the pipes regularly and check if the equipment was working properly to prevent blockages and failures.
In terms of emergency management, the basement should develop an emergency plan, not only for fire, but also for public safety events such as earthquakes, rainstorms, and smoke.
However, there were some safety risks in the basement. It is usually a limited and confined space, and oxygen problems often occur. Whether it is oxygen or lack of oxygen, it will cause harm to the human body. If they entered the basement without ventilation for a long time, they might suffocate due to lack of oxygen.
In addition, if the basement was located in a low-lying area on the plain, it was necessary to pay attention to the surrounding ground settlement, ground cracks, and collapses. In the rainy season, it was also necessary to prevent problems such as rainwater from pouring back into the road.
Click on the link below to read the comic "The System Sent Me a Sanctuary"
basement designBasement design could be considered from many aspects such as function, space utilization, and environmental treatment.
There were many options in terms of functions. If it was the basement of the villa, it could be designed as a space for entering the house, receiving guests, and receiving guests. For example, it could be designed as a private living room, suitable for free discussion of work, brainstorming, or chatting with friends. For collectors, it could be designed as a fashion collection hall for collecting items such as figurines, shoes, bags, snowboards, etc. Sports enthusiasts could transform it into sports venues such as mini basketball courts, or set up leisure fitness venues such as table tennis, billiards, fitness areas, etc. Young people who liked e-sports could design the basement as an e-sports room to build a panoramic immersive multi-functional e-sports atmosphere room full of technology. The basement could also be set up as a golf practice room to meet the needs of playing at home. For movie lovers, the basement was closed and the conditions of insufficient light made it an ideal place to build a private theater. It could be equipped with a comfortable and spacious sofa, a large projection screen, and a KTV and movie viewing equipment.
From the perspective of space utilization, the basement could be connected to the first floor, forming an upward space between the first floor and the first floor to increase the penetration and vertical extension of the space. The space on the second floor could be used as a bedroom. At the same time, the basement could be divided into different functional areas, such as a video room with a bathroom, a reception room, a tea room, a painting room, etc., or a sunken courtyard with a water bar, a game room, a reading area, etc., to make activities more convenient and make life in the basement richer.
In terms of environmental treatment, problems such as ventilation, lighting, and drainage needed to be solved. For example, the basement could be transformed into a sunken garden to solve the problem of ventilation and lighting and create a sunny leisure area. In terms of drainage, the sewage pump could be used to solve the problem. The integrated box of the sewage pump had no odor and mosquito problems. The sewage discharge would not pollute the surrounding environment. The automatic control method was simple, and the machine's hydraulic control method was stable, which could extend the service life.
In addition, it could also be designed according to the special needs and preferences of the owners. For those who like to drink tea, the semi-basement state of the modern villa (with ventilation and lighting conditions) could be designed into a quiet tea room space; for wine lovers, the basement could be used to achieve constant temperature and humidity ventilation conditions, design a private wine cellar, and set up a bar area for wine tasting.
Click on the link below to read the comic "The System Sent Me a Sanctuary"
A Girl in the Basement: A True Story. How did she survive in the basement?She might have survived by finding sources of water. There could have been a leaky pipe or some stored water containers in the basement. For food, perhaps she was given small amounts sporadically by her captor, or she found some old stored food items that were still edible.
2 answers
2024-11-26 00:16
Basement massage chairThe massage chair in the basement was a massage chair with a simple Japanese design. It was made of a combination of wood and canvas. In the traditional Japanese architectural style, it was a common decoration in shrines and temples. The main feature of the massage chair in Zhoudu's basement was that it had a wooden frame. The interior was filled with canvas and the exterior was covered with wood. It had an ancient design, and its structure was relatively simple. It was easy to carry and could be placed in the living room, bedroom, and other places, giving people a warm and comfortable feeling. The design of the massage chair in Zhoudu's basement emphasized comfort. The curves of the chair were beautiful, and it was very comfortable to sit in. It could support one's body and relax one's body and mind.
Is 'The Basement' a true story?I'm not sure. It depends on the specific work 'The Basement'. Sometimes it could be based on real events, but often it's purely fictional.
2 answers
2024-10-18 12:25
Is the hospital basement a morgue?The morgue was usually located in the basement of the hospital or in the area adjacent to the operating room and emergency room. In addition to the mortuary, the basement of the hospital might also include a parking lot, equipment room, medical record room, radiation therapy and nuclear medicine department, canteen, and library. Therefore, not all basements in hospitals were morgues. They had other functions and uses.
Basement Design PlanThe basement design plan mainly covered the following aspects:
** 1. Design Concept **
1. ** Formation and application **
- The design concept was determined according to the customer's needs and the characteristics of the venue, and then applied to space planning, material and color selection, lighting and ventilation.
2. ** Assessment **
- ** Esthetics Evaluation **: To evaluate whether the aesthetic effect of the design meets the client's aesthetic expectations, and whether it is unique and attractive.
- ** Function Evaluation **: Check if the design meets the customer's functional requirements, and if it is practical and convenient.
- ** Feasible Assessment **: Consider whether the design plan is feasible in terms of construction and budget.
** 2. Function layout **
1. ** Planning of parking spaces **
- Reserve enough parking space according to the number of cars of the family members and consider the possibility of future expansion. The size of each parking space should be reasonably planned according to the size of the vehicle to ensure the safety and convenience of parking. Set up sufficient lighting equipment to ensure the brightness and safety of the parking area.
2. ** Rest Area **
- Comfortable chairs and coffee tables were provided for family members to rest and communicate.
3. ** Leisure and Entertainment Area **
- ** Entertainment facilities **: According to the interests and hobbies of family members, entertainment facilities such as home theater and game console will be provided.
- ** Decor and atmosphere **: Create a warm, comfortable, and attractive atmosphere through reasonable decorations.
4. ** Storage Space Planning **
- According to the needs of the family members, the storage space of clothes, shoes, toys, books, and other items should be planned. Design suitable lockers, consider the opening method of the cabinet door, the internal layout and storage method to improve the efficiency and convenience of storage, ensure that the storage area is well lit and well vented, and keep the items dry, clean and odorless.
5. ** Fitness Area **
- Consider equipping fitness equipment to meet the fitness needs of family members.
6. ** Workspace **
- To provide suitable work desks and office furniture for family members to work and study at home.
7. ** Cleaning Area **
- It was equipped with washing machines, dryers, and other cleaning equipment to facilitate the washing of clothes and household items.
** 3. Construction Design **
1. ** Basic structure design **
- ** Load-bearing beam and column design **: According to the functional layout and usage requirements of the basement, design a reasonable structure of the bearing wall, bearing beam, and column to ensure its bearing capacity and stability.
- ** Floor structure design **: Choose the appropriate floor structure form (such as pre-cast slab, cast-in-place slab, etc.) to meet the structural safety and use requirements.
2. ** Design of drainage structure **
- According to the drainage needs and the size of the basement, select the appropriate drainage pump and drainage pipe to ensure the normal operation of the drainage system. Set up a waterproof layer to prevent the infiltration of underground water and cause adverse effects on the basement structure.
Click on the link below to read the comic "The System Sent Me a Sanctuary"