Conference recording, photography, video recordingThere are many aspects to consider when recording a meeting. The following are the relevant techniques and precautions:
** 1. Equipment preparation **
1. Equipment status: Make sure the equipment is in the best condition. Since the recording time of the meeting may be long and a lot of filming is needed, prepare backup batteries and sufficient memory cards.
2. "Choice of lens: It is equipped with a variety of lenses, such as 50mm fixed-focus lenses, 24 - 70mm zoom lenses, etc., to meet different shooting needs.
3. Ancestors: Tripods, flashlights, and reflective panels were essential. The tripod was used to keep the camera stable in dim light or when it needed to be stable for a long time. The flash and the reflective board were used to cope with complex lighting conditions, such as filling up the light when the light was insufficient.
** 2. Understanding the venue **
1. Location information: Before filming, try to understand the size of the conference venue, lighting layout, stage location, and the seating arrangements of the presenter and participants.
2. Checking the location: Going to the scene in advance to check the location helps to determine the best shooting angle and position, avoiding hasty decisions during filming.
** 3. Shooting content **
1. Key moments: Focus on capturing key moments, such as the speaker's speech, the interaction of the participants, the signing ceremony, etc., and show the atmosphere of the meeting, such as the audience's reaction, enthusiastic discussion, etc.
2. Diverse composition:
- Multi-angle shooting: Don't limit yourself to one angle. By changing the shooting angle and focal length, you can make your photos or videos more diverse and vivid.
- There should be a panoramic view to show the whole picture of the conference, as well as a close-up shot to highlight important details; there should be a close-up shot of the speaker and an interaction scene of the audience.
** 4. Light control **
1. Lighting Challenge: The lighting in the conference venue is usually uncontrollable. When there is insufficient light, you can use an external flash or a reflective board to fill in the light, but you must pay attention to avoid overexposed or strong shadows.
2. Shooting format: If the lighting is complicated, it is recommended to use the RAW format (for photography) so that there is more room for adjustment in the later stages.
** 5. Points to note during filming **
1. Keep a low profile: Try not to disturb the normal progress of the meeting, move lightly, and reduce the interference to the participants. Use silent mode or reduce the shutter sound (for photography).
2. Pay attention to etiquette: dress appropriately and abide by the relevant rules of the meeting. Some occasions required permission from the organizer or the participants to film.
3. Using a live photo streaming platform (for photography): Proficient in the use of live photo streaming platforms (such as Xiangxiang Pie), can upload photos to the cloud in real time to share with remote viewers or organizers, improve shooting efficiency and provide promotional materials.
4. Instant backup: During long-term shooting, photos or videos should be backed up in time. The data can be backed up to a laptop or cloud regularly during the shooting interval to prevent data loss due to equipment failure or accidents.
5. Post-processing (for photography): Although the conference focused on real-time shooting, post-processing (color matching, trimming, retouching, etc.) could not be ignored. Before delivery, photos had to be filtered to remove duplicate or out-of-focus images.
** 6. Main Points of the Shooting Stage **
1. [Omni-directional Shooting: You can stand in the middle of the back and take a complete picture of the background board, banner, etc.]
2. Empty Shot: Shoot the empty shots of the details of the venue, focusing on the layout or decoration of the venue, without the main character.
3. Shooting timing: important moments such as the opening ceremony or the leader's speech at the beginning of the meeting should be taken, and the photos should reflect the theme of the meeting.
4. [Shooting frequency: Don't shoot too frequently, so as not to disturb the meeting and increase the workload of the post-production selection.]
5. Choice of angle: The angle should make the character appear decent and generous, and there should be enough light to avoid completely shooting the main character from the side or the light being too dark.
6. Character expression: Pay attention to the expression of the main character when shooting. It should be serious or smiling, and avoid bad expressions.
7. Photograph of participants: Not only the leaders 'close-ups, but also the photos of the meeting members, and the state of concentration of the meeting members must be taken.
8. Everyone's photo shoot: Try to fit everyone in and leave less space to reflect the full content of the meeting.
** 7. Special requirements for different types of shooting (for photography)**
1. Close-up:
- Close-up shots, whether from a close distance or a long distance, had to be taken care of, such as shooting a leader's speech.
- When shooting at close range, if you use a flash, you should raise it to shine on the ceiling and fill the character's light with reflected light to avoid the face being too bright.
- For cameras with red-eye reduction function, turn on this setting.
- When shooting with a long focus, the flash can be directly aimed at the object in front of the camera. The camera is advanced and the image sensor has high resolution. When the light is good, there is no need to turn on the flash. The CPU can be adjusted appropriately (such as 400 - 800).
- When the flash could not be turned on and the camera equipment was not good, a tripod could be used to slow down the shutter to get a clear photo.
2. Meeting location:
- Choose a position where you can see the entire scene, so that the theme of the meeting and the characters can be integrated into the camera, and you can use the wide-angle lens to shoot a panoramic view.
- When shooting a panoramic view, the light measurement should be measured from the middle and both sides. It is not recommended to use a flash. Otherwise, the face near is too white and the exposure is insufficient. You can use a tripod to extend the exposure time.
3. Dynamic photo shooting (such as award ceremony, handshake):
- Flash must be used to increase the shutter speed and correct exposure to clearly fix the moving picture.
- When shooting with a flash at close range, it was similar to the method of shooting leaders. If there was light, try not to use the flash. You could use a tripod to fix the shot. If there was no tripod, you could use a table, a pillar, and so on.
<a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>