strobe has black line above 200 shutter speed
Shutter Speed of the D.J. mini2
The shutter speed of the D.J. Mini2 ranged from 4 seconds to 1/8000 seconds.
<a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
1 answer
2026-07-01 01:02
scanner shutter
The largest external size of the scanner shutter product was 121.80mm x 88.86mm x 25.77mm. The average thickness of the plastic part was 2.70mm. The plastic part was made of PC+ABS. The shrinking rate was 1.005. The mass of the plastic part was 18.35g. The technical requirements of the plastic part were that there should be no defects such as peaking, incomplete injection molding, flow lines, pores, warping, silver lines, cold material, spray lines, bubbles, etc. The plastic part in the product drawing was a complex support. Although it did not have a complex surface, its height fluctuated greatly. Its shape was complex and its shape was symmetrical. It played a functional support role in the product and was a key component inside the product. There are four vertical walls in the middle, each with a through hole of? 3.2. The four holes here must ensure the requirements of the degree of concentration to facilitate the flexible rotation of other related parts after assembly. The two ends of the U-shape had a hook to assemble other components. There was a hook at the bottom of the U-shape. All these installation parts required accurate size, so there were high requirements for geometric tolerance. The difficulty of the mold design was the choice of the mold opening direction, the design of the parting surface, and the design of the four-hole sliding block core-pulling mechanism. Due to the large size of the plastic part, the complex structure, the fluctuation of the parting surface, and the many rubbing positions, the mold was ranked first.
<a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
1 answer
2026-06-29 06:02
How popular is the Strobe Edge manga?
It's quite popular among manga enthusiasts. Many people love the story and the art style.
2 answers
2025-06-06 07:08
Yanji Changbai Mountain direct high-speed rail line
There was currently no direct route from Yanji to Changbai Mountain. Five transit routes were recommended: C1018 to C1315, C1026 to C1319, G8126 to C1315, G1266 to C1303, and C1040 to D552. You could choose according to your needs.
Changbai's novel is equally exciting. Everyone is welcome to click and read it!
1 answer
2026-02-09 15:41
Is Shutter Comic Over?
Yes, it's over. The storyline has come to a conclusion.
1 answer
2024-10-13 00:24
What is Shutter Novel?
Shutter Novel could be a specific type of novel. It might refer to a novel that has elements related to shutters in some way, perhaps using the concept of shutters as a metaphor in the story, or it could be related to a series where each 'chapter' or part is like a shutter opening to a new part of the narrative.
3 answers
2024-10-29 08:34
Fuji Shutter Repair
For the repair of the shutter of a Fuji camera, the situation was different for different models. For example, the repair price of a Fuji X100V camera shutter that did not respond was about 1100 yuan. The official repair price of a Fuji camera shutter that did not respond was about 700 yuan to 1500 yuan. There were differences in the repair price of different models of camera shutters that did not respond. The Fuji camera models were divided into micro-single, single-lens reflex, and card cameras. The repair price of a Fuji micro-single, single-lens reflex, and card camera was about 1400 yuan. When the shutter did not respond, in addition to the repair price, there was also a replacement fee and testing fee. Spare parts and service fees ranged from 300 to 600 yuan. The repair price would also vary depending on the repair fault. For example, if the camera had problems such as not charging, the lens, not focusing, and the lens could not be activated, the replacement fee would also change if the shutter did not respond. If it was a 120 film machine shutter sticking fault like the Fuji Super Fujica - 6, if the online repair price was too high, you could clean it yourself. First, clean the dirty things on the edge of the shutter steel sheet, the oil stains on the aperture blades, etc. If there were still problems, you could further disassemble the shutter and clean it thoroughly. However, when operating, you must pay attention to the shutter steel sheet not to be deformed.
<a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
1 answer
2026-06-30 09:56
Illustrated shutter mechanism
Shutters were generally divided into curtain shutters, mirror shutters, and electronic shutters. Take the curtain shutter as an example. Many cameras had two shutter doors, called the front curtain and the back curtain. The one near the lens was the front curtain, and the one near the original was the back curtain. When the camera was shooting, the back curtain of the shutter was opened from bottom to top. At this time, the front curtain of the shutter was still closed, so no light would enter the light-sensitive original. Then, the shutter curtain opened from top to bottom, and the image was exposed from top to bottom. During this time, the camera would make a click sound. After the exposure was over, the shutter curtain closed from top to bottom. Once the curtain closed, the entire exposure was over. At this time, the camera would make a "click" sound, which was the origin of the "click" sound when the camera took pictures. Different types of cameras had different ways to check the shutter device. For single-lens reflex cameras, the shutter could be seen when the reflective plate was lifted during exposure. Among the micro-cameras, only Canon's full-frame micro-cameras R5 and R6 could be seen through the camera settings. After the camera was turned off, the shutter device in front of the original could be seen after the lens was removed. For other micro-cameras, the shutter could only be seen during the exposure process.
<a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
1 answer
2026-06-30 14:21
Museum Aperture Shutter
When shooting in a museum, the aperture and shutter settings needed to take into account many factors.
** 1. Aperture **
1. ** Large Aperture (Small F Value)**
- A large aperture could increase the amount of light entering the museum in a dimly lit environment, making the photo brighter. For example, in some museum scenes where the light was not good and it was not suitable to use a flash (because it might cause light damage to the cultural relics), if a large aperture lens such as Canon 50mm f/1.2L was used, it could guarantee enough light to take clear photos.
- A large aperture could make the depth of field shallow, and the background was easy to blur. When taking close-ups of an exhibit in a museum, you can highlight the main body of the exhibit and blur out other interfering elements in the background.
2. ** Small Aperture (Large F Value)**
- If you want to make the entire scene clear, such as taking a full picture of a museum exhibition hall or displaying a display scene of multiple items, you can use a small aperture. A small aperture would allow less light to enter, and the overall picture would be a little darker, but it could obtain a larger depth of field, ensuring that the front and back of the picture were clear.
** 2. Shutter **
1. ** High-speed shutter (Denominator large)**
- If there were visitors walking around in the museum or if they wanted to capture moving elements such as staff, a high-speed shutter could be used to clearly freeze the moving object. For example, if the shutter speed was set to 1/640 second, it would be able to capture the instant motion better.
- With a high-speed shutter, the amount of light passing through the shutter would be shorter, and the image would be darker. Therefore, in a dimly lit museum environment, a high-speed shutter might need to be used with a large aperture or high sensitivity to ensure the brightness of the photo.
2. ** Slow Shutter (Denominator Small)**
- A slow shutter speed would allow light to enter the camera for a longer time and increase the amount of light entering the camera. It was suitable for use in a museum with insufficient light. However, if one held the camera, the slow shutter speed would easily cause the image to blur due to hand shake, unless the camera had a good anti-shake function or a tripod was used.
- In the museum, if you wanted to capture the artistic effect of light and shadow, such as the light trajectory through the stained glass, you could use a slow shutter, but you had to be careful not to capture dynamic interfering objects to avoid blurring the picture.
<a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
1 answer
2026-07-01 07:39
Konica Shutter Repair
The repair of the shutter of a Konica camera depends on the model and the type of malfunction. For example, the failure of the Konica 3A shutter winding could be caused by the shutter lock top rod getting stuck in the winding gear, or the shutter lever positioning screw loosening. If the top rod of the quick door lock was stuck, removing the quick door lock could restore the winding function, but there might be problems such as triggering the shutter once winding. If the positioning screw was loose, it needed to be tightened with a small screwdriver to reset. As for the problems that might occur with the Konica II B, such as the winding shutter being very astringent, it might be due to rust, iron filings, etc. that caused the mechanical transmission structure to be astringent and needed maintenance.
<a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
1 answer
2026-07-01 07:58
Popular Answers
Popular Searches
a
b
c
d
e
f
g
h
i
j
k
l
m
n
o
p
q
r
s
t
u
v
w
x
y
z