Handmade Bookmark
Here are a few ways to make a small signature by hand: ** 1. Leaf Vein Bookmark Creation Method ** 1. ** Choose leaves **: Choose leaves with thick and dense veins. Generally, it is suitable for evergreen trees, such as osmanthus leaves, heather leaves, papaya leaves, oak leaves, tea leaves, etc. The leaves were selected in late summer or autumn when the leaves were fully mature and began to age. 2. ** Boiling the leaves with soda solution **: Based on 1 liter of water, prepare 70 grams of soda and 50 grams of soda (these two drugs are available in chemical stores). Limewater can also be used instead of soda solution. In an porcelain cup or casserole, boil the prepared soda solution and put in an appropriate amount of washed leaves. After boiling, gently stir the leaves with chopsticks to prevent stacking, so that they are evenly heated. Boil for about 5 minutes. After the leaves turn black, scoop out a leaf and put it into a plastic basin filled with clear water. Check if the meshy flesh is corroded and easy to peel off. If it is easy to separate, fish out all the leaves and put them into a plastic basin filled with clear water. Then, separate the meshy flesh from the leaf veins one by one. 3. ** Remove the meshy flesh **: Place the boiled leaves on your palm or on a glass plate. Gently wipe the surface of the leaves with the smooth part of the old toothbrush handle. The corroded meshy flesh can be wiped off. Then rinse it under the tap and continue to wipe until the meshy flesh is completely removed. 4. [Bleached Leaf Veins]: Put the cleaned leaf veins in a solution of bleachers, rinse them with clean water, and put them in old books and newspapers. After absorbing the water, take them out and use them as leaf bookmark. 5. Dyeing, Drawing, Writing: You can use red, blue ink or other dyeing agents to dye your favorite color. You can also draw, write, and finally tie a thread on it. ** 2. How to paste a bookmark ** 1. [Material preparation: Flowers such as peach blossoms and winter jasmines, or small animals such as butterflies and moths; scotch tape, tweezers, ribbons, cardboard, and old newspapers.] 2. ** Production steps **: Carefully tear off the petals, stamens, or wings and antennae of the butterfly with tweezers, place them on a piece of hard paper, arrange them according to your own design, and stretch the petals or wings. They were fixed to a piece of paper with transparent tape, covered with a few layers of old newspaper, and then added glass, dehydrated and pressed dry. After the water dried, cut the cardboard into a heart shape, triangle shape, fan shape, etc., and finally tie a ribbon to make a beautiful sticker bookmark. ** 3. How to make a photo bookmark ** 1. ** Material preparation **: ginkgo leaves, branches of Metasequoia glyptostroboides, clustered plants or small animals such as longicorn beetles and locusts; printing paper, developer, fixer, transparent tape, ribbons, and transparent glue. 2. ** Production steps **: Take a piece of transparent film and cut it into a rectangular shape slightly longer than the bookmark. The dried plant leaves and branches were trimmed and arranged on the film, and then fixed with thin strips of transparent tape. For moths and butterflies, only their wings were taken, and after being pieced together, they were glued together with tape. It was best to remove the internal organs of small animals such as locusts with a syringe and then fix them on the film. In the dark room (with the red light turned on), cut out the No. 2 or No. 3 printing paper of the same size as the film, put the film with the specimen on the printing paper, and press it with a clean glass sheet. Carefully expose it to light for about 10 seconds (the light intensity will shorten the time), then immediately turn off the light and put the printing paper into the developer. After a clear image appeared on the photo paper, it was placed in the fixer for 10 minutes. After that, it was rinsed with water, dried, trimmed, and finally colored with transparent watercolor. After tying a ribbon, it was made into a bookmark with animal and plant images printed on it. ** 4. Use hard shell or thin cardboard to make a bookmark ** 1. [Material preparation: Solid glue, scissors, colored Xuan paper, tassels, a hole cutter, some hard-shell flyers from some merchants, a support plate for clothes, and a trademark card.] 2. ** Production Steps **: - Use a knife to cut the hard shell or thin cardboard to the size of the bookmark you want (small bookmark looks better). - Cut the colored paper into the size of a bookmark and stick it on the cardboard. If the back doesn't look good, wrap it all with colored paper. - Punch holes and wear tassels. - Bookmarks could be written with inspirational sayings, stamped with decorative seals, or they could be left bare. "Luo Mingxia Love Letter" is equally exciting. Everyone is welcome to click and read it!
Cat Bookmark Handmade
Here are two ways to make cat bookmark: - ** Cute Kitten Bookmark Handmade Origami Tutelage **: - It required a lot of care to make it, and the paper had to be fixed well, especially the corners of the paper. The creases had to be neat. After folding them in place, they could be scraped flat with their nails. - If he encountered a problem with the steps, he could use his imagination or find a partner to help him. - If you were already familiar with folding the same piece of work, you could make slight changes to some steps and origami shapes to create your favorite origami style. You could also boldly add your favorite colors, small labels, or paste some special paper on the origami. - Although the specific folding steps were not mentioned, it was clear from the text that these precautions had to be followed to complete the creation of the cute kitty bookmark. - ** Wool Cat Bookmark Making **: You can hook a cat bookmark with a small amount of wool. It's simple and interesting, but there's no mention of the specific steps.
Handmade Antique Bookmark
Here are a few ways to make antique bookmark: ** 1. Use the jade thread to make an ancient style bookmark ** 1. ** Material preparation ** - Pink No. 72 jade thread: 35cm×3, 25cm×2, 20cm×2, 15cm×1, green 3 strands, 3 strands of tassel thread. 2. ** Production Steps ** - Take a 35cm pink No. 72 jade thread as the axis, take 6 threads as the winding thread, and weave an oblique knot on it. The length of the winding thread is arranged according to the requirements. - The two threads in the middle were tied into an oblique knot, and then the specific thread was used as the axis. The other threads were wound into a sparrow head knot. For example, use the orange line as the axis, the green line as the winding line, and make four sparrow head knots on each side. - After a series of operations, such as weaving the two axes in the middle into an inclined coil and combining them, and then continuing to use one line as the axis to do winding and weaving the inclined coil knot, including weaving the inclined coil knot back and forth, a total of 10 inclined coil knots on each side, and so on. - Finally, after some adjustments, such as cutting off the remaining thread, burning it with a lighter, taking a section of No. 72 jade thread to weave an oblique knot, then using 15cm of thread and 3 strands of thread to coil, passing through the front coil and tying it, making tassels, and other operations, the bookmark was completed. ** 2. Use a metal piece with a hollowed pattern to make an ancient style bookmark ** 1. ** Material preparation ** - A metal sheet with a hollowed out pattern, a pair of UV-glue, a color essence, a thin brush, tape, and an ultra-violet lamp. 2. ** Production Steps ** - He used tape to stick one side of the metal sheet. - Mix the glue and the color essence together (be careful not to add too much color essence). - Using a thin brush, he smeared the mixture into the gaps of the metal sheet. - Then, he used an ultra-violet lamp to solidify the glue and color it. He could color and design it according to his own preferences. - After painting and solidifying it, he tore off the tape, and the antique bookmark was completed. "Luo Mingxia Love Letter" is equally exciting. Everyone is welcome to click and read it!
Making a handmade bookmark stories
I made a bookmark using an old ribbon. I just tied a little bow at one end and it became a simple yet pretty bookmark.
Handmade bookmark by primary school students
The following are some of the methods for primary school students to make a bookmark by hand: * * 1. Cardboard Bookmark ** 1. * * Basic rectangular bookmark ** - [Prepare materials: White cardboard, colored pens, colored paper, scissors, and a punch.] - Steps: - Cut a rectangular shape from the white cardboard with scissors. The size can be according to your preference, but the length should not exceed 15 centimeters. - Punch a hole in one end of the white cardboard with a punch. - Use a colored pen to paint on the bookmark, such as drawing the outline of a bird in the middle and color it according to your preference. - He used scissors to cut a very thin strip of colored paper, folded it in half, and put one end of the sleeve into the hole of the bookmark, while the other end came out of the sleeve and stretched it. 2. * * Gradually changing colors and striped bookmark ** - [Materials: Two rectangular pieces of white cardboard, tools (for applying color)] - Steps: - On one of the cards, he painted a gradual color change from dark to light from the bottom to the middle, and on the other card, he painted a striped color. - He used a tool to make a hole on the top of the two bookmark and tied a colored rope. 3. * * Owl Bookmark (Using Paper Jam)** - Materials: brown and light yellow cardboard, waste paper, glue, scissors. - Steps: - From the brown and light yellow cardboard waste paper, he cut out the owl bookmark's body and wings. - He glued the wings to the sides of the owl's body. - Cut out the eye sockets and eyeballs of the owl bookmark and glue them together, then make the mouth and feet. - He glued the eye sockets, mouth, and feet to the corresponding positions on the body of the handmade owl bookmark, and stuck the tip of the mouth into the page. 4. * * Personalized Little Skeleton Bookmark (Using Paper Jam)** - Materials: White paper, colored paper, black hard paper, solid glue, pen, and carving knife. - Steps: - He drew the shape of a small skull on the white paper and cut it out. - Cut out the eyes with colored paper (the shape can be chosen), glue the eyes with a solid glue, and draw a small nostrils with a pen. - He stuck the little skull with the nose on the black hard paper and carved the edge with a carving knife. * * 2. Bookmark for comprehensive materials ** 1. * * Using expired masks to create a bookmark ** - Materials: Stickers, handmade paper, expired masks, scissors, transparent tape, double-sided tape. - Steps: - He took out the nose bridge of the expired mask and cut a rectangular shape of the same length as the nose bridge. - After cutting it, he stuck double-sided tape on it and wrapped the bridge of his nose. - He chose two pieces of paper and pasted them onto the handmade paper. Then, he cut out the excess parts. - Stick the cut sticker on the transparent tape. The back also needs to be glued with transparent tape. Cut off the excess transparent tape and use it as a bookmark. * * 3. Paper decorative bookmark ** 1. * * Simple Fold Bookmark ** - [Prepare materials: slightly harder cardboard, ribbons, or colored ropes.] - Steps: - Find a slightly harder cardboard and fold it in half. - He drew a rough shape according to his preference and cut off the excess with scissors. - He cut out a heart on the top piece of paper and pasted his favorite drawing on the bottom piece of paper. - They would decorate it with ribbons or other colored ropes. 2. * * Yan paper flower bookmark ** - Steps: - After the community volunteers distributed the blank bookmark, they could use the paper to make small flowers and embellish the bookmark. They could also personally put tassels on the small bookmark. "Luo Mingxia Love Letter" is equally exciting. Everyone is welcome to click and read it!
Grade 1, 2, 3 handmade bookmark is simple and beautiful
Here are some simple and beautiful handmade bookmark designs for first, second, and third years: - ** Bookmark: - Prepare a square piece of paper (It can be white paper or colored paper). First, fold the middle line and open it. Then, fold one corner to the middle line. The folded corner will not be opened. Fold it up again. The lower right corner will be folded up to the middle line. The lower left corner will also be folded up to the middle line. The right corner will be folded down. The left and right sides will be folded down. After the right side is opened, fold it to the side. The left side will be folded to the right side. The right side will be folded inward according to the crease. The left side will be folded to the right side. This way, it will be shaped like a small animal's ear. Finally, you can use a pencil to draw your favorite pattern and color it to make a bookmark. - Using a square piece of paper, fold it diagonally to form a crease, fold the lower corner to the center line, and then fold it again. The two corners were folded to the center line, and then they were folded in. Cut out a triangle, then cut out a small triangle, and the other side was cut out in the same way. Cut out a 1cm wide paper strip, apply solid glue, and then use a white acryl marker to draw a small dot decoration. A beautiful bookmark was completed. - Natural Elements Bookmark: Take your child outdoors on weekends to collect autumn leaves and flowers. Choose your favorite plants to make a bookmark. It can stimulate your child's curiosity about nature and cultivate observation and creativity. This bookmark can be given to parents, classmates, teachers, etc. - ** Crochet bookmark (difficult, can be completed with the help of parents)**: For example, use four strands of cotton thread and 2.0 crochet, use yellow, white, and blue thread to make a butterfly bookmark. The main part of the butterfly hook is mainly made of long needles. Repeat 8 sets of patterns and fold it in half. The tail hook is a four-leaf clover, which is connected and fixed with a braid needle. "Luo Mingxia Love Letter" is equally exciting. Everyone is welcome to click and read it!
Handmade and handmade e-book
handmade embroidery
Handmade embroidery was one of the best traditional China crafts, also known as silk embroidery. It had a history of at least two to three thousand years in China. It was a kind of embroidery that used silk thread to create various patterns. Handmade embroidery had a rich meaning. For example, a Miao girl went to various places to collect embroidery works in order to protect her own handmade embroidery. These embroidery products reflected tranquility, concentration, inheritance, and the continuation of national culture. In the place of the non-hereditary inheritor of Manxiu, there were qipaos embroidered by the embroidery lady, the painting of the Qingming Festival, and other embroidery works. The pictures were vivid and lifelike. In terms of types, there were different kinds of embroidery like Jiayu lace embroidery, such as three-dimensional embroidery, multi-colored flat embroidery, three-dimensional coiling embroidery, etc. There were many patterns. Just Jiayu lace embroidery had thousands of patterns in stock, and they could be customized to make dresses, children's dresses, halter dresses, etc. There were also embroidery pieces like Qing Dynasty's Qing Dynasty's Qing Dynasty. In terms of regional characteristics, due to different market demands and embroidery origins, embroidery crafts began to form their own local characteristics. Among them, embroidery products in Su, Shu, Yue, and Xiang had a wide market and great influence, forming the "Four Famous Embroideries". During the Ming and Qing Dynasties, folk handmade embroidery further developed, and Su embroidery, Yue embroidery, Xiang embroidery, and Shu embroidery developed. " Palace Wall Flower Shadow: The Legendary Life of the Mute Embroidery Girl " was equally exciting. Everyone was welcome to click and read it!
Transformers Handmade
Here are some of the ways to make Transformers by hand: - In terms of material preparation, he could use multiple packaging boxes, cardboard (used to make helmet arcs, etc.), LED lights (modified to make headlights), and other materials, just like when someone made Transformers for children. During production, for example, the middle could be hollowed out so that it could be worn on the body. If the upper body could not be worn after the upper body was made, the waist could be designed to open and close. The feet could be hollowed out and matched with shoes. It could also be used to make weapons for Transformers. - As for obtaining blueprints, he could search for the blueprints of the Transformers model on the Internet and then choose the ones he liked and which were simple to make. - He could also use the parts of the Transformers building blocks to modify them. For example, he could use the parts of the Bruko building blocks to make a mechanical flying wing. He would choose a building block with two round holes on the back (such as Prime, Megatron, etc.), install two universal joint keys, prepare the universal thigh parts, left and right hands, forearm and elbow joints, laser guns, special effects keys, etc. Finally, he would install the completed wings on the joint keys on the back. "Transformers: Origins" was not enough. Everyone, please click to read the novel!
Handmade airplane
There were many ways to make a handmade plane. It could be made with colored paper, such as in the book "Good Baby's creative colored paper handcraft: Hundred Paper Airplanes". There was also a method to make an airplane model with disposable chopsticks. First, collect enough chopsticks, wash and dry them, then cut them according to specific steps, stick them together, and assemble them. In addition, A4 paper could also be used to make a catapult paper plane. After a series of folding steps, such as folding left and right, overlapping the top corners, and so on, it could be launched after being stuck with a rubber band. There were also disposable paper cups that could be used to make toy planes, and even clay could be used to make planes (although they might not be able to fly). There was also a farmer from Shandong who had a junior high school education after the 1980s. He spent a lot of effort to make a real plane that could fly. The production process included deciphering the drawings provided by aviation enthusiasts and overcoming the difficulties of choosing materials. The novel "Hundred Years of Spaceship" is equally exciting. Everyone is welcome to click and read it!
Handmade Rocket
The following is a method to make a rocket by hand: 1. ** Material preparation ** - Choose an empty 1.5-liter soda bottle as the main body of the rocket. Make sure the bottle is clean and free of residue. - Prepare an air pump to inflate the rocket. - The cardboard was used to make the tail of the rocket. - The tape was used to fix the various parts. - Matches or lighters (used to ignite solid fuel). - Safety glasses to protect the eyes to ensure safety. 2. ** Production Steps ** - ** Prepare the rocket body **: The empty plastic bottle is the rocket body. - ** Making Tail Wing **: You can use three pieces of cardboard of the same width, one of which is slightly longer. He removed the middle part of the first piece of cardboard and turned it into a frame. He cut a strip from both sides of the second piece of cardboard and stuck the cut strip to both sides of the third piece of cardboard. Then, he stuck the first frame. Finally, he inserted the remaining second piece of cardboard and used two rubber bands to bounce them to both sides. Then, he decorated the rocket launcher. The rocket launcher was ready. He could also draw a few rockets and put them in the middle. He could pull them and launch them. 3. ** Propulsion system related (if involved)** - The propulsion system of a rocket usually consisted of fuel and an oxidiser. Self-made rockets could use solid fuel, such as gunpowder or a mixture of sugar and potash. It was important to note that self-made rockets were dangerous. Safety must be ensured during the operation and relevant safety regulations must be followed. The novel "Hundred Years of Spaceship" is equally exciting. Everyone is welcome to click and read it!