Canon large format error code
The common fault codes and reasons for Canon's large-format printer are as follows: 1. E020: Paper jam. The solution is to open the printer to check the position of the paper and remove the obstruction. 2. E021: Paper transmission failure. It may be caused by uneven paper thickness, blockage of the transmission channel, or foreign matter stuck in the printer. The solution is to check the transmission channel and clean up the stuck paper or foreign matter. 3. E022: Transfer fuser malfunction. If this malfunction occurs, check the transfer fuser and replace it if necessary. 4. E023: The positioning fuser is faulty. The solution is to check the positioning fuser and replace it if necessary. 5. E024: The cleaning fuser is faulty. The solution is to check the cleaning fuser and replace it if necessary. There were also some error codes, such as: 1. E02000: No rolling media. 2. E0200A: Print paper width not detected. And the code related to the ink box: 1. W01000) Ink Check BK: The ink box is almost empty. 2. W01001) Ink Check Y: The ink box is almost empty. 3. W01002) Ink Check M: The ink box is almost empty. 4. W01003) Ink Check C: The ink box is almost empty. 5. W01004) Ink Check PM: The ink box is almost empty. 6. W01005) Ink Check PC: The ink box is almost empty. 7. W01006) MTcart Full Soon: The maintenance cart is almost full. 8. W01007) Mist Full Soon: Waste ink and mist fan sheet in the waste ink box of the roller. 9. W0100F) Feed Limit: Manual feed limit. 10. W01021) Wrong Media: Wrong media type. 11. W01022) No full bleed: Boundless printing is not allowed. 12. W01030GARO-W1030GARO: Command not supported in image mode. 13. W01031GARO-W1031GARO: The parameters are invalid in the image mode. 14. W01032 GARO-W1032: The required items are displayed in GARO image mode. 15. W01034 GARO - W1034 GARO: Other alarm signals in image mode. 16. W01035GARO-W1035GARO: Command not supported in setup mode. 17. W01036GARO-W1036GARO: The parameters are invalid in the setting mode. 18. W01037 GARO-W1037: The required items are selected in GARO setting mode. 19. W01038GARO-W1038GARO: Set the data output range. 20. W01039GARO-W1039GARO: Set other alarm messages. Read more exciting novels for free
Canon printer prompts scanner error code
Canon printer scanner error codes have many situations and reasons: 1. If the error code E100 0000 appears, the reason is that the printer and the system have conflicts. You can plug in the data cable again and restart the printer and computer. 2. When the code was E225, it was the scanner error code. It was necessary to check whether the cable connection of the scanning component was normal, whether the IS exposure lamp was disconnected, and to clean the scanning component. 3. Different models of Canon printer may have different error code meanings, and the scanner error may also be due to poor connection of the data cable. You should check whether the data cable and the data cable interface are damaged, and whether the data interface is connected properly. It may also be caused by other faults such as paper jam that cause the scanner to report an error. If the printer driver is not installed properly, it may also cause a scanning error. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
How to clear the error code of Canon printer
The following is how to clear some of the error codes on Canon's printer: - 5b00 (The printer is full of waste ink): First, press the "Stop/reset" button with your finger, and then press the "power switch" button to turn it on. When he saw the green light coming from the power light, he released the "Stop/reset" button. - For certain models such as the TS9080, TS9020, TS 8020, TS8080, TS9000, and TS8000, enter maintenance mode (which can be used to clear certain error codes or make related settings): 1. Turn off the power first and put the paper into the printer. Press the [Stop] key, then press the [Power] key (do not release both keys);3. When the power light is on, do not release the [Power] key, only release the [Stop] key;4. Press the [Stop] key five times, release both keys at the same time, and the power light will be on for a long time to enter successfully (sometimes two lights). - For models such as the TS9180, TS9120, TS8180, and TS8120, enter maintenance mode: 1. First turn off the power of the printer, put the paper in the machine, press the [middle of the screen] without letting go, and then press the [power] without letting go;2. When the power light is on, do not release the [Power] button and press the [Middle Screen] five times;3. When the power supply turned white and the display screen turned black, the maintenance mode was successfully entered. Different error codes may have different ways to clear them, for example: - E05 (Ink box identification fault): Zero or replace the ink box to solve the problem. You need to check whether the ink box is installed correctly. If the ink box is installed incorrectly, take out the ink box and install it in the correct way. If it is incompatible or the ink box has a problem, you need to replace the ink box. - Bug code 1682 (Ink box physical hardware malfunction): Re-install the ink box. If the malfunction still exists, the ink box may be defective and replace it with a new one. - 1684 (Unable to recognize ink bottle): install ink bottle that can support this model. - 1686 (Unable to detect remaining ink): Try reinstalling the ink or replacing the ink. In addition, in the case of E02 (paper transfer error), you must first check whether the paper feed tray of the printer is placed correctly, and then check whether there is any obstruction between the print head and the paper.(For example, Canon MDF4700 reported error code e301 - 0001), the paper jam could be removed. If the sensor of the grating was broken or dirty, the solution was to replace or clean the sensor of the printer's grating. If the paper tray did not return to its original position, just gently return the paper tray to its original position, and then turn it on to print normally. If the print quality drops, it may be due to insufficient ink or toners, or the showerhead is blocked. You can take measures such as replenishing ink or toners and cleaning the showerhead according to the specific situation to avoid or resolve the relevant error codes. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Canon scan error
There are many reasons for Canon's scanning errors and solutions: 1. If the error code was E1000000, it might be a conflict between the printer and the system. The data cable needed to be plugged in and plugged out again, and the printer and computer needed to be restarted. 2. When the document scan reported "computer failure or busy", first unplug the power of the printer, wait for about 10 seconds, and then plug it in. At the same time, check whether the printer is online. Under normal circumstances, the online light next to the "Online" button of the printer should be always on. 3. For code E225 (scanner error code), please check whether the cable connection of the scanning component is normal, whether the IS exposure lamp is disconnected, and clean the scanning component. 4. If the scan type is not set to (remote scanner), the scanner is busy, or the scanner is unable to scan due to an error, check the scanner status and try again. At this time, the scanner driver will be terminated (Code: 2, 162, 0). 5. If the Canon MDF4752 cannot be scanned after installing the driver, press the right button on the printer to start scanning, and the click is blank. It cannot be scanned with the system's own scanning program, and an error is reported when Canon MDF4752 is installed. The reason may be that the scanning type is not set to (remote scanner) on the device, the scanner is busy, or the scanner has an error. You need to check the scanner's status and try again. 6. The HP printer M1216 always had scanner errors. It might be that the printer driver was not installed properly and needed to be reinstalled. 7. If there is a problem when scanning with a Canon printer, it may be due to dirt on the ink box or print head. The printer can be cleaned and maintained regularly, such as wiping the outer shell and interior of the printer with a clean soft cloth to clean the dirt on the ink box and print head. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Canon paper jam error
If the paper jammed during the printing process, first turn off the power of the printer, then carefully remove the stuck paper to ensure that no paper scraps remained inside the printer. If there was no foreign object and no real paper jam, it might be that the grating disk and grating bar inside the printer were dirty (they were the rulers that controlled the left, right, front, and back printing distance). The error E03 was not necessarily a paper jam, and the card process would also report an error E03 (other brands of printer may also do this). If the grating plate and the grating strip were dirty, they could be removed and gently rubbed under flowing water (they were made of film that was not afraid of water, and could also be washed with some dishwashing liquid. Be careful not to use brute force). After they were clean, they could be dried and installed. The round grating disk was stuck on the big gear on the left side of the printer with double-sided tape. It could be torn off gently. When installing, the round edge should be put into the gap of the sensor and then stuck on the gear. There was no need to install it at a fixed angle. The long grating strip was behind the ink box. It was easy to dismantle. Pay attention to passing through the gap of the sensor when installing. In addition, he could also check the paper-feed sensor and wipe it with a clean thing, or he could try to turn it off and restart. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Canon printer error clearing
The following are some common errors and methods to remove them: ** 1. Print head-related errors (Take b200 - b207 as an example)** 1. ** Cleaning Operation ** - After turning on the computer, press the resume button for two seconds or more. 2. ** Nozzles Test (Take some models as an example)** - After turning on the computer, press the reset key twice. At this time, the print test page of the spray spout will start to print. 3. ** Restart of the microchip (Take some models as an example)** - Without installing the ink box, press the resume key to install the AC charger. - Release the resume key, press it again within 5 seconds, and the car will automatically stop in the middle. ** 2. E02 (Transmission paper error)** 1. Check whether the paper feed tray of the printer is placed correctly. 2. Check the print head and paper for any obstructions. ** 3. The problem with the light grating sensor (if the light grating sensor is broken or dirty)** - Change or clean the sensor of the printer's light barrier. ** IV. The paper tray has not returned to its original position ** - He gently moved the paper tray back to its original position, and then turned it on to print normally. ** 5. Ink Cartridge-related errors ** 1. **1682 (Ink box physical hardware failure)** - Re-install the ink box. If the problem still exists, the ink box may be defective and replace it with a new one. 2. **1684 (Unable to recognize ink box)** - Installs the ink box that can support the model. 3. **1686 (Unable to detect ink remaining), E05 (Ink box recognition failure)** - Canon's printer displayed e05, indicating that it could not recognize the ink box or was incompatible, or the ink box was not installed correctly. It was recommended to reset or replace the ink box to solve the problem. It was necessary to replace the ink box with a new one or take out the ink box and install it in the correct way. ** 6. Carton related error ** 1. **E02Error (The printer paper is not installed correctly)** - He needed to re-install the paper. 2. **E03Error (The printer paper tray is not installed correctly)** - He needed to insert the paper box again to solve it. ** 7. The Canon mf4700 printer reported error code e301 - 0001 (paper jam occurred inside)** - Just take out the cardboard. If the printer error is because the wasted ink counter has reached the threshold, you can use the following methods to clear the wasted ink: 1. He opened the "Waste Ink Zero" software on the printer (software download address: Follow Wechat:IT Player, reply to "Zero" to automatically obtain the download address). 2. Put the printer into maintenance mode (different models have different ways of doing so). <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Canon printer clear error
The following are some common errors and solutions for Canon printer: ** 1. Ink Cartridge-related errors ** 1. ** Ink holder sub-carriage malfunction (5100 error)** - Turn off the power of the printer, open the access door of the printer, and carefully check if there is any paper jam, paper scraps, or other foreign objects inside. - Gently remove any obstructions, then close the access door and restart the printer. 2. ** Ink box physical hardware failure (1682)** - If the problem still exists, it may be that the ink box is defective and needs to be replaced with a new one. 3. ** Unable to recognize ink box (1684)** - Installs the ink box that can support the model. 4. ** Unable to detect ink remaining (1686), Ink box identification failure (E05)** - It may be that the ink box was installed incorrectly. Take out the ink box and install it in the correct way. You can also try to reset or replace the ink box to solve the problem. ** 2. Ink waste error ** 1. ** Waste ink removal component abnormal (5C00 error)** - Because the waste ink collector is full or malfunctioning. You may need to contact professional maintenance personnel to deal with problems related to the waste ink collector. 2. ** error code 5B02 (indicating that there is insufficient ink, but the ink box cannot be taken out to refill the ink. Actually, it is related to clearing the waste ink)** - This situation involved the waste ink of the printer being cleared. The process of clearing the waste ink counter in the printer. ** 3. Paper related errors ** 1. **E02_Transfer paper error ** - Check whether the paper feed tray of the printer is placed correctly, and then check whether there are any obstructions on the print head and paper. 2. ** The printer tray error code is E02 (Paper not installed correctly), E03 (Paper tray not installed correctly)** - E02Error requires the paper to be reinstalled;E03Error requires the paper tray to be reinserted. ** 4. Print head related error ** 1. **b200 - b207 (Print head broken)** - Cleaning operation: After turning on the computer, press the resume button for two seconds or more. - [Nozzles test: press the reset button after turning on the computer. The page of the test will start to print.] - [peep rom reset: do not install the ink box, press the resume key to install the ac charger, release the resume key, press it again within 5 seconds and let go, the car will automatically walk to the middle and stop.] ** 5. Other Mistakes ** 1. ** The printer Canon mf4700 reported error code e301 - 0001 (internal paper jam)** - Just take out the cardboard. 2. ** The sensor of the light barrier is broken or dirty (may cause the printer to report an error)** - Change or clean the sensor of the printer's light barrier. 3. ** Paper Feeder did not return to its original position ** - He gently moved the paper tray back to its original position, and then turned it on to print normally. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Nikon error code
Common error codes for Nikon cameras include: - **ERR error message **: If you see "ERR" on the LCD or electronic viewfinder, it may be one of the following three problems. The shutter button may not have been pressed correctly. Make sure the button is in place and pressed completely. The camera cannot capture images with the manual exposure setting. You can change the setting or use the automatic setting. The Nikon camera may have encountered a boot error. Remove the battery and memory card for at least 15 minutes before turning the camera back on. - **F--error message **: In most cases, this error message is limited to Nikon DSLR cameras. It is related to the lens error, indicating that the lens and the camera are not communicating. Check the lens to ensure that it is locked in place. If a specific lens does not work properly, try to use another lens to determine whether the problem is with the lens or the camera. - ** Feifei error message (Nikon DSLR camera)**: The camera is unable to take photos with the selected aperture. Turning the manual aperture ring to the highest number can fix this error message. You may need to let the camera automatically select the aperture to take a photo with the correct exposure. - **"Information" icon error message ("i" in the circle)**: There are three possible error conditions. The battery may be exhausted and needs to be recharged. The memory card may be full or locked. You can look for the small flip switch on the side of the card and flip it to the unlocked position. The camera may detect that one of the photo subjects flashed when taking a photo and can take a photo again. - ** No memory card error message (when a memory card is installed in the camera)**: There may be several reasons. Make sure that the memory card type is compatible with Nikon cameras; the card may be full and you need to download the photos to the computer; the memory card may be faulty or has been reformat by another camera. In this case, you may need to reformat the memory card with this camera (note that reformat will delete all data on the card). - ** Movie Record error message **: Unable to record a movie usually means that the Nikon DSLR camera is unable to transfer data to the memory card at a fast enough speed for recording. Most of the time, it is a problem with the memory card and requires a memory card with a faster write speed. It may also be a problem with the camera. You can try to use another memory card first. - ** Shutter release error message (Nikon DSLR camera)**: indicates that the shutter release is stuck. Check the shutter button for foreign objects or sticky dirt. Clean the button and try again. - **E01 error code **: Wrong lens. The camera cannot communicate with the lens. It may be that the lens is not installed properly or there is a connection problem. The solution is to reassemble the lens and ensure that it is firmly connected. - **E02 error code **: Memory card error. The memory card may be incompatible, damaged, or needs to be reformat. The solution is to replace it with a suitable memory card or reformat it. - **E04 error code **: battery problem, low battery, needs to be replaced or recharged. - **F--error code (lens unlocked, no lens mount, aperture ring problem)**: The camera cannot detect the installed lens (lens unlocked or no lens mount). You need to check the lens connection and reload the lens to ensure compatibility with the camera. The camera cannot detect the aperture ring position of the lens (aperture ring problem). Set the aperture ring to the correct position to ensure compatibility with the camera. - ** EM error code **: Memory card error, the camera cannot read or write to the memory card. The solution was to try inserting and removing the memory card again, or replace it with a new one. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Canon format conversion
If you want to convert Canon format, you can do it in the following ways: 1. Using the photo management software on the computer: - The Canon camera was connected to the USB port of the computer with the USB cable that came with the camera. - Open Canon's official software, such as Canon's Image Browser-IX or Canon's Digital Photo-Professional. - Choose the option to import photos. During the import process, you will see the option to convert the format. - On the interface, select the format you want to convert to (such as JPEG, TIFF, etc.), and then click OK or start conversion button. After the conversion is completed, you can find the converted photos in the output folder. Note that you can edit and adjust the photos before converting. Some software has basic editing functions. 2. In the camera menu: - He entered the camera menu and found the RAW processing. - If you want to convert one by one, click to select the image; if you want to process in batches, click to select the image range, click to select, and press the Q key to confirm. - Then, he chose the format he wanted to convert (such as JPEG). He could also adjust the brightness, white balance, photo style, and other settings, and choose to save and save as a new file. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Memory card format error
When you encounter a memory card format error, you can try the following methods to solve it: 1. Confirm whether the memory card is compatible with the device: Different devices have different requirements for the format of the memory card. Make sure that the memory card used is compatible with the device that downloads the novel. 2. Try to use different card readers and devices: Sometimes the problem may be with the card reader. You can try to replace the card reader to eliminate hardware failures. 3. [Temperature-control: Memory card recognition problems are prone to occur in high-temperature environments. Maintain the device to work within a suitable temperature range.] 4. Check and clear the error flag: In some cases, the error flag may cause the memory card to not be recognized properly. You can check and clear the error flags by connecting to the computer. 5. Reformat the memory card: If the above methods do not solve the problem, you can try to reformat the memory card, but be sure to back up the data before reformat. 6. Consider replacing a new memory card: If the above methods cannot solve the problem, it may be that the memory card itself has malfunctioned. At this time, you need to consider replacing a new memory card. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Canon scanned the mailbox and found an error.
If Canon scans an email with an error, it may be caused by the following reasons: - E-mail sending encryption setting problem: If the customer's mailbox scanning is set to send and receive the SSL-encrypted email, it may cause the multi-functional device to be unable to send the scanned email. You can set the authentication method in the multi-functional device scanning settings to "enable" to solve the problem. - IP Change: IP Change may affect the ability to scan to email. - mailbox server problems: Although users claim that the mailbox server is fine, there may be some undetected problems. If you are a Suzhou user and encounter the same problem that cannot be solved, you can call the after-sales service number:0512 - 69616769. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>