What weapon does the broken blade belong to?
The broken blade belonged to a throwing type hidden weapon.
Broken Blade
There were many forms and reasons for blade damage: 1. ** Wear of the flank **: The friction and wear on the flank caused by mechanical stress. The tool material was too soft, the back angle was too small, the cutting speed was too high, and the feed rate was too small. All of these could cause excessive wear on the flank, which would reduce the size accuracy of the processed surface and increase the friction. 2. ** Boundary wear **: Commonly seen at the contact surface between the main cutting edge and the work piece. Hardening of the surface of the work piece, friction caused by serrated chips, affecting the flow of chips, and other factors can lead to tool collapse. 3. ** Rake face wear (crater wear)**: It is mainly caused by the contact between the chips and the material of the work piece and the spread of the heat. The tool material is too soft, the cutting speed is too high, and the feed is too large. This wear would distort the tool, interfere with chip removal, and reduce the strength of the cutting edge. 4. ** plastic distortion **: It occurs under the high temperature or high stress of the cutting edge. Cutting speed and feed rate were too high, the hard point effect of the work piece material, and the cutting edge temperature was too high due to the tool material being too soft. These were the main reasons that would affect the quality of chip formation and sometimes lead to tool collapse. For cubic boronitride (cbt) tools, which were high in hardness and brittleness, and were made of powder, they were easy to be damaged under intermittent cutting conditions. The damage forms and reasons were as follows: 1. ** Blade Collapse **: This is a common early damage form when the cBN tool continuously or intermittently cuts steel and cast iron. There is a small gap on the cutting edge. The micro-chip can continue to cut within the allowed wear limit. 2. ** Spalling **: When end mill steel and cast iron, shell-like peeling often occurs on the front blade. 3. ** Broken **: Small pieces or large pieces of the cutting edge are broken and cannot be cut normally. It is easy to occur when cutting high-hardness materials continuously or intermittently. 4. ** Cracks **: After a long period of intermittent cutting, there are mechanical fatigue cracks parallel to the cutting edge caused by mechanical shock, and there are also cracks vertical or inclined to the cutting edge caused by thermal shock. After the cracks expand and merge, it will cause the blade to crack or break. In addition, in actual cutting, when the material structure, hardness, and margin of the work piece are not uniform, the front angle is too large, resulting in low cutting edge strength, the process system is not rigid enough to produce vibration, or when intermittent cutting and grinding quality is poor, the cutting edge is prone to micro-collapse. Cutting conditions are extremely harsh, cutting quantity is too large, there is an impact load, there are microcracks in the blade or tool material, residual stress in welding or grinding, and careless operation may cause the blade or tool to break. For brittle materials, such as hard alloy, ceramic, and PC with high TiC content, due to surface structure defects, potential cracks, and residual stress in welding or grinding, the surface is easy to peel off when the cutting process is unstable or the tool surface is subjected to alternating contact stress.
Broken Sword Blood Blade
According to the information provided, there was a work that contained 218 chapters, such as the prologue in the first volume of "Descent of the Demon Seed" and the first chapter of "Descent of the Demon Seed". However, there was no more detailed information about the broken sword.
The broken blade is not close combat
The broken blade was not a melee weapon. It was a throwing weapon that could throw up to three blades at the enemy at the same time.
Tyrannical Blade Orange Weapon at a Glance
Overlord Blade had Orange weapons at grade 70, grade 80 (including 80 Small Orange weapons), grade 90 (including 90 Small Orange weapons), and grade 95. Other than that, people like Xin Tinghou were all Orange weapons with Overpowering Blades. Among them, Xue Nu used Winter Plum as his material, and there were also Orange weapons like Blood Sorrow and Yi Dao that looked very good.
Broken sword hilt, seven weapon attributes
The broken sword hilt can open the quest line. After completing the quest, you will be rewarded with one of the seven rewards. The weapon's attributes are as follows: 1. [Queldar, Mirror of the Soul]: Nizhi's one-handed sword. 2. [Queldar, Shadow's Cheat: Minna's One-handed Sword] 3. [Queldar, Power of Faith: Endurance against the two-handed sword.] 4. [Queldar, Remnant of Slaughter]: Minnie's Two-Handed Sword. 5. [Hammer of Wrath and Sanction: Minna's One-handed Hammer] 6. [Pure Flame Hammer: One-handed Hammer of Nizhi] 7. [Tower of Holy Light: Minnie's Two-Handed Hammer]
The protagonist uses a black broken sword weapon
In " The End of Ten Days," there was a plot where the main character used a broken sword. There was a completely black broken sword with ancient patterns on it. This sword seemed to have a life of its own. It was heavy and would dance wildly in the air. In the battle with it, the main character, Zhang Shan, broke it into two halves and held the hilt to fight. In the settings related to World of Warcraft, there were also many weapons with broken sword models, such as Tysarak, Mind Carver, Silent Crusader, Blazing Magic Longsword, sharpened Cave Dweller's thigh bone, Turalyon's Great Sword, Frostmourne, etc. However, there was no mention of any special description or usage of the black broken sword. In the other reference materials, the ancient cold weapons, broken sword shooting, and other content did not involve the situation where the black broken sword was used by the protagonist.
Similar to the novel " Broken Cliff Blade "
Is there a novel similar to S2 Broken Blade?
Liu Canyang's Broken Blade
" Broken Blade " was a mafia novel written by Liu Canyang in 1968. The main character of the story,"Yama Blade" Li Jueling, killed and robbed people when he was a chivalrous man. After offending the assassin organization,"Black Tower", he began to run for his life. He accidentally saved Huang Junya, the orphan daughter of an official. The two of them traveled together and gradually fell in love. Under Huang Junya's persuasion, Li Jueling wanted to leave the martial world, but the enemy did not let him go and killed Huang Junya. After that, Li Jueling lost all hope and broke the treasured sword "Life and Death Bridge" and retired from the martial world. This was one of the few stories in Liu Canyang's works that involved the relationship between men and women. It was exciting to read. The protagonist, Li Jueling, was a typical rebellious underworld figure. In terms of writing, the book's narrative was not sloppy. The plot was closely linked and the climax was repeated. Although the martial arts design lacked highlights, it was intense and exciting. The story was readable in a small space. However, there were also some shortcomings. For example, the language was repetitive and long-winded. The description of the two sides often scolding each other before the fight would make the readers feel bored or even choose to skip it. The book was basically composed of dialogue and martial arts. The story content was small and the plot development was simple. If the plot development could be enriched, the effect might be better. When the book was published, it was very popular. The original version had more than 100,000 copies circulated, and the number of pirated copies could not be counted. At that time, it was very popular among young people, but now it was not very famous.
The main character is called Broken Blade.
He recommended a few novels. One Piece: Saving Ghost Island begins with making a big billboard. It was a light novel by Zi Ying Jiu Xiao. It told the story of Night Rabbit who fought his way up from the bottom to the top of the Hundred Beasts Pirates. " Traveler of the Universe " was a novel written by 1 Great Wisdom. The male protagonist, Lu Xuan, continued to pursue more after transmigrating. The Tang novel was very exciting. " My Wife is a Top Streamer Heavenly Queen " was a novel written for urban entertainment. It was super sweet, and the male and female leads went in both directions. " To Live in the Saber-Sword God's Domain " was written by a purple-blue pig. The main character transmigrated into the body of a terminally ill patient. The plot was exquisite and touching. Although it was not perfect, it was considered a masterpiece among sword fanatics. Those who liked swords could watch it. "The Path of the Swordsman" wasn't really recommended, and Zai Dao's wuxia fantasy genre had already been cut. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>