Lego Shapeshifting Steel Rope
The information about the Lego Transformable Steel Rope was as follows: In the exclusive booth of the Lego Master Gallery, there were Transformers series of steel ropes exhibited by Cheng Jianliang, a player from Foshan, which were one meter high. In addition, there were related contents such as [Lego MOC] Transformers G1 -Mini Steel Rope- 3-Minute Construction Tutelage to show the construction of the Lego Transformable Steel Rope. There were also videos related to the Lego Transformers, including the MOC transformation of the steel rope, the assembly tutorial, etc. The novel " Hundred Years of Spaceship " is equally exciting. Everyone is welcome to click and read it!
Lego Shapeshifting Prime
Lego's Transforming Prime was numbered 10302 and was officially launched on June 1, 2022. It belonged to the 18+ series. It was packaged in a traditional black box with the logo of Lego, Hasbro, and Takara Tomy. The parts were divided into eleven bags, numbered from 1 to 10, with five pieces of paper and some printed copies. The completed model was 35 centimeters tall. The design was derived from the G1 version of the Transformers toy and animation. The colors were balanced in red, blue, and gray, and there were metallic and bright silver embellishments. In terms of mobility, the neck, shoulder, elbow, wrist, hip, ankle and other joints performed well. Although the knees could rotate, they were not connected by a joint. The head was placed on the spherical joint and had good mobility. The iconic head was highly recognizable. It used common parts to capture the details of the animation. The eyes and the grid on the top of the head matched the animation settings. The torso part replicated the original animation's abdominal slanted heat sink grid and windshield, but the abdomen was narrower; the chest and shoulders were close to the animation's proportions, and the chest could be opened to restore the details of the leader module in the big movie. There was a gap in the back to adapt to the transformation mode, but it could be made up by the rocket backpack provided by Lego. The rocket backpack was fixed by two clips, and the thrusters could be adjusted. There was an autobot logo between the exhaust holes. The two shoulders of the Prime were printed with the logo of the autobots, and there were yellow arrows on his arms. He tried his best to restore the shape of his hands. He could move his thumb, and the rest of his fingers could move together. The weapon had a high degree of realism, and the details were more obvious than in the animation. It could be fixed in the hand very well. " Transformers: Origins " was not enough. Everyone, please click to read the novel!
Type of Steel Rope
The types of wire ropes can be divided into many ways: 1. ** According to usage **: Including general purpose steel wire rope (including plated steel strand), elevator steel wire rope, aviation steel wire rope, drilling well equipment steel wire rope, aerial ropeway and cable car steel wire rope, lifting steel wire rope, pre-stressed concrete steel wire rope, fishing steel wire rope, mine lifting steel wire rope, tire steel wire rope (tire steel cord), tape steel wire rope, etc. 2. ** Divided by diameter **: It can be divided into thick diameter (large size, diameter greater than 60mm), thin diameter (small size, diameter less than 8mm), and ordinary diameter (medium size, diameter range 8.0 - 60mm). 3. ** According to the type of rope core **: There are metal rope cores, natural fiber cores (such as hemp cores, cotton cores and other organic fiber cores), synthetic fiber cores (such as man-made fiber cores such as nylons), plastic integral rope cores, rod-shaped rope core steel wire ropes, and rubber core steel wire ropes. 4. ** According to the basic structure **: including single-twisted steel wire rope (single-strand steel wire rope), double-twisted steel wire rope (ordinary steel wire rope), and three-twisted steel wire rope (steel cable). 5. ** According to the twisting structure and twisting characteristics **: point-contact wire rope (non-parallel-twisted wire rope), line-contact wire rope (parallel-twisted wire rope), and face-contact wire rope. 6. ** According to certain properties, such as loose and non-loose steel wire rope, rotating/micro-rotating/non-rotating steel wire rope, high strength/high toughness steel wire rope, wear-resistant/corrosion-resistant steel wire rope, soft steel wire rope. 7. ** According to the twisting direction (twisting method), there are: Right Same-direction Stranding (ZZ) steel wire rope, Left Same-direction Stranding (SS) steel wire rope, Right Cross Stranding (2S) steel wire rope, Left Cross Stranding (SSS) steel wire rope, and internationally, there are also mixed-direction Stranding steel wire ropes. 8. ** According to the cross-section shape of the strand: round strand wire rope and special-shaped strand wire rope. 9. ** Divided by cross-section shape **: There are round steel wire ropes and flat steel wire ropes. 10. ** According to the contact state of the steel wires **: point contact with the steel wire rope, line contact with the steel wire rope (including point-line contact with the steel wire rope). 11. ** According to the cross-section shape of the steel wire **: It can be divided into steel wire ropes made of round steel wire and steel wire ropes made of special-shaped steel wire (such as sealed steel wire ropes). 12. ** According to the surface condition of the steel wire **: divided into smooth steel wire and plated steel wire. 13. ** According to the mechanical properties of the steel wire **: There are special steel wire and No.1 steel wire. 14. ** Divided by the number of strands **: including single-strand, six-strand, eight-strand, twelve-strand, eighteen-strand, thirty-four-strand, etc. Among them, twelve-strand and eighteen-strand wire ropes are composed of two layers of strands, and thirty-four-strand wire ropes are also called non-rotating wire ropes. 15. ** Divided according to twisting direction and method **: Twist left and right according to the direction of twisting the strand. The twisting method of the wire rope is divided into alternating twisting (reverse twisting) and same-direction twisting (forward twisting). 16. ** According to strength classification **: Different countries have different rating standards. For example, China and Japan have different strength classification for round strand and abnormal strand wire ropes. "The Island of Life" is also a wonderful novel. Everyone is welcome to read it!
Megatron VS Steel Rope
Megatron was the ruthless leader of the Decepticons, while Steel Grimace was the leader of the Dinosaur Faction. In the early days, Dino-Robots, including Grimlock, had been duped by Megatron to join the Decepticon camp, but later, because of the fact that they were saved by the Prime, Grimlock led the Dino-Robots back to the autobots camp. In terms of combat power, in the early stages of the Dinosaur Army, when they did not have the fusion function, they were slightly inferior to Hercules and the other hybrid Vajras. However, Wei Zhentian could send Hercules and the other hybrid Vajras to deal with the Dinosaur Army, causing the Dinosaur Army to be beaten up. However, the Fusion King Kong was helpless against the thick-skinned Dinosaur Army. As the plot developed, Steel Cudgel and the others created a powerful combination of King Kong and King of Calculation in the head of the Cosmic Monarch. In the Legend of the Shura King comic, the Dinosaur Army completed the combination and crushed Flying Tiger, Chong Yunxiao, and Chaos Panther in the battle (although the original creator did not acknowledge this comic). In the 2017 Power of Heaven Origin comic, the Dinosaur Army combined into Long Yanwang, posing a powerful threat to the Decepticons. However, there was no data to show that Megatron and Steel Grimace had a direct one-on-one battle, but Megatron was good at using strategies, such as he once bewitched the robot dinosaur to attack Optius Prime. "Transformers: Origins" was not enough. Everyone, please click to read the novel!
A novel like Ballet on a Steel Rope
National Code for Lifeline Steel Rope
Lifeline wire ropes have different national specifications for different application scenarios: 1. ** Selection criteria **: - For the lifeline with a bearing capacity of not less than 1 ton, the material shall be a metal steel core wire rope. The plating grade shall refer to the standard of the national standard (GB8918 - 2006), and the grade shall not be lower than Grade A. If the diameter of the wire rope obtained by calculating the bearing capacity of the combination of the clamp and the wire rope is less than 8mm, the diameter of the wire rope selected shall not be less than 8 mm. - In the installation of the lifeline for aerial operations, it is required to use a Galvanized Steel Rope with a diameter of no less than 12mm. It should be free of defects such as broken wires, broken strands, burns, corrosion, and serious distortion. 2. ** Scrap standard **: - The number of broken wires of the wire rope of the lifting machinery within a lay pitch should reach 10% of the total number of wires of the wire rope (such as the rope 6×19 = 114 wires, when the number of broken wires reaches 12 wires, it should be scrapped and replaced; such as the rope 6×37 = 222 wires, when the number of broken wires reaches 22 wires, it should be scrapped and replaced; for the wire rope composed of thick and thin wires, the number of broken wires is calculated as one for each fine wire, and 1.7 for each thick wire). - The steel wire shall be scrapped if the amount of wear or corrosion exceeds 40% of the original diameter. When it is less than 40%, the number of broken wires can be reduced and scrapped according to the regulations. The number of scrapped wires of the steel wire rope used for lifting hot metal or dangerous goods shall be half of the standard for the scrap of the steel wire rope used for general cranes. - In addition, when the diameter of the wire rope is reduced by 7%; when the whole wire is broken; when the wire rope has obvious internal corrosion; when the partial outer layer of the wire rope shows "cage" shape distortion; when the fiber core of the wire rope is twisted, bent, plastically deformed, the hemp core comes out, and the performance of the wire rope is affected by the high temperature of the arc, the wire rope should also be scrapped; when the whole wire strand is broken, the wire rope should be scrapped; When the diameter of the wire rope is reduced by 7% or more compared to the nominal diameter, even if no broken wire is found, the wire rope should be scrapped; the hemp core should be scrapped; the wire rope should be scrapped if there is obvious corrosion; the partial outer steel wire is elongated into a cage-shaped state; Mechanical damage due to the operation on the sharp projections, local wear due to the friction of the supporting structure, vibration of the wire rope between the head wheel and the drum, and fatigue fracture due to narrow wear (Working in too large a rope groove or working in too small a support groove will cause this problem), the wire rope is seriously worn, the fiber core is protruding, and the wire rope twisted in the same direction is seriously worn.(caused by friction between the intersecting points of the multi-layer wound wire rope), severe corrosion caused by the wire rope soaked in the water that has been treated by the clamp, almost no signs of damage on the surface but internal corrosion, complete disappearance of the gap between the strands, and typical broken wires caused by bending fatigue of the wire rope.(This kind of situation occurs mostly in the type of point-contact wire rope), broken wires between strands or rope cores (caused by the lack of rope core support, which is obviously different from the broken wires at the "top" of the strands), etc. should also be scrapped. 3. ** Rope clamp related specifications **: - In the section steel suspension, the nominal diameter of the wire rope shall not be less than 14, and the number of rope clips shall not be less than 3.(In case of special circumstances, when the load of the frame is large and the wire rope is required to participate in the force calculation, the nominal diameter of the wire rope and the number of rope clips shall be determined according to the calculation and the table). - In the overhanging operating platform, the nominal diameter of the wire rope should be determined according to the calculation. The diameter of the rope clamp should match the wire rope, and the number of rope clips should not be less than 4. - The distance between the rope clips is generally 6 - 7 times the nominal diameter of the wire rope; the direction of the rope clip is that the U-shaped bolt of the rope clip is buckled at the end of the wire rope (i.e. the end of the rope), and the clip seat is at the working section. All the rope clips are in the same direction and cannot be staggered. 4. ** Other requirements **: - During the installation of the lifeline for aerial work, the personnel engaged in the installation and removal of the lifeline must hold the valid certificate issued by the local government or the specialized agency. For the installation of the cross brace, one inclined rod should be buckled on the main column, and the other one should be buckled on the extended part of the small horizontal rod. The distance between the buckle at both ends of the inclined rod and the vertical rod node should not be less than 20cm. During the installation and removal, the lifeline must be hung with a red card and prohibited from being used. For all lifelines longer than 100m, in harsh environments or when multiple lifelines are needed in small areas, cushions shall be placed at the parts where the lifelines are in contact with the sharp edges of the steel beams to prevent damage to the lifelines; the lifelines shall be pulled inside the columns on the free surface and shall not be pulled outside. - In terms of lifeline-related tests, such as static load test: hang a 200kg heavy sandbag at the middle wire rope position and let it stand for 24 hours. It is required that the wire rope and the clamp are not bent or deformed, the wire rope is not broken, and the roof panel is not damaged; For impact test, hang an 80kg heavy sandbag at the middle wire rope position, and the free fall height is 2 meters. - In terms of wire rope slings commonly used in construction sites, the safety factor shall not be less than 6 times; when the end of the wire rope is braided and fixed, the length of the braided part shall not be less than 20 times the diameter of the wire rope and shall not be less than 300mm; the wire rope clamp shall be on the side of the wire rope, and the distance between the rope clips shall not be less than 6 times the diameter of the wire rope. "The Island of Life" is also a wonderful novel. Everyone is welcome to read it!
Between Steel Rope and Megatron, who is stronger?
In the Transformers combat power ranking, Megatron was ranked third, while Steel Rope was ranked sixth. From this perspective, Megatron was stronger than Steel Rope. However, Steel Cudgel was the first person to challenge the position of Prime, and he had the ability to fight against Megatron. His tough and rough personality, as well as the robot dinosaur's ability to use violence against violence, made him a competitive opponent against Megatron. However, Steel Cudgel's unruly personality was not conducive to the relationship between humans and the autobots, and his arrogance could be used by Megatron. Overall, Megatron might be stronger. " Transformers: Origins " was not enough. Everyone, please click to read the novel!
The mountain is transported with steel wire rope and rollers
Steel wire rope was a common transportation method on the mountain. For example, there were mountain transportation wooden ropeway sports cars that used wire rope single-sided hanging wheels, and large U-shaped wheels that could be used to transport bamboo in the forest. The principle of transportation could be referred to the principle of polar rope transportation in mine transportation. It used a winding winches. One end of the wire rope was wound on the drum of the winches, and the other end was hung on the carrier of transportation (such as a mine car, which might be used to carry wood, bamboo, etc.). When the drum rotated, the carrier was pulled to run. The single-reel single-wire rope traction is single-hook transportation; two wire ropes are wound on two coax drums in different directions; the double-reel double-wire rope traction is double-hook transportation. When the drums rotate, the two groups of carriers at the ends of the two wire ropes run up and down on two tracks (if there are tracks) at the same time, and the transportation capacity is twice as large as that of a single-wire rope. At the same time, in order to ensure the transmission efficiency and service life, the diameter of the roller and the diameter of the wire rope should meet a certain multiple relationship. For large diameter wire ropes, if it is not suitable to use large wheels, a number of small wheels can be used to replace the role of large wheels. When the wire rope is wound into or out of the groove, the maximum deviation angle (i.e. the angle between the wire rope's center line and the plane vertical to the shaft of the wheel) should not be greater than 5°. However, the mountain transportation should choose the appropriate specifications of the sheaves and wire ropes according to the actual transportation weight. For example, the sheaves with a range of 200 - 2000 pounds had many different models that could correspond to the specifications of the wire ropes ranging from 6mm to 24mm. While watching the Olympics, you can also read the wonderful novels related to the Olympics!
Requirements for the diameter of the lifeline steel wire rope
The requirements for the diameter of the lifeline wire rope in different scenarios were different. In some scenarios, the horizontal lifeline was mainly made of 8mm diameter 7*7 steel wire rope; in the standards for the installation and inspection of the lifeline, the diameter of the steel wire rope should not be less than 12mm, and the steel wire rope with a sheath should be used; In the commercial sale of the spot, the specifications of the plated steel wire rope without plastic coating were 1.2 mm- 10mm for the purpose of binding the lifeline. " The Island of Life " is also a wonderful novel. Everyone is welcome to read it!
What's the name of Steel Rope Body King Kong?
In the settings of the Transformers G1 era, Steel Wires created the Kamikaze team, and the five members of the Kamikaze team combined to become the King of Calculation. However, there was no mention of Steel Wires having their own body shape, so it was not clear what Steel Wires Body was called. " Transformers: Origins " was not enough. Everyone, please click to read the novel!
Shapeshifting
There were many incidents related to beating people up on the show. There were urban teenagers who committed violent acts on the show. For example, Li Xuanyou beat his parents for money. There were also urban teenagers who fought with the staff in the mountain village because their drinks were confiscated. They even picked up an axe and pressed the director to the ground. In addition, there were also cases where the mother of the city teenager hit the teenager because he was lazing in bed or something else. The novel " Trash Girl Transformation " is equally exciting. Everyone is welcome to click and read it!