Old DSLR time-lapse photography
Using an old DSLR for time-lapse photography, here are some key points: ** 1. Initial preparations ** 1. ** Equipment and accessories ** - ** Cameras **: Old DSLR requires manual mode and B-door (long exposure) function. - ** Lenses **: Choose the appropriate focal length according to the subject of the shoot. For example, wide-angle is used for large scenes, and telephoto can compress the sense of space. - ** Tripod **: It must be sturdy and stable to ensure that the camera does not move during the shooting. - ** Shutter release or remote control **: Reduce the vibration caused by touching the camera and accurately control the shooting process. If the camera does not have an interval shooting function, it can be connected to an external intelligent timer. 2. ** Planning the shooting content ** - ** Choose a theme **: For example, choose a scene with obvious dynamic changes such as clouds flowing, sunrise and sunset, and city traffic. - ** Plan **: Estimated total shooting time, estimated number of shots, and then calculate the required shooting interval. ** 2. Setting the parameters ** 1. ** Shooting Mode ** - ** Manual Mode (M)**: It can ensure that the exposure parameters are consistent throughout the entire shooting process. Aperture priority mode (A) could also be selected. When the light changed greatly, the aperture value would be fixed, and the camera would automatically adjust the shutter speed. 2. ** Exposing parameters ** - Aperture: Usually choose a smaller aperture (such as f/8 - f/16) to obtain a larger depth of field and ensure a clear front and rear view. However, be careful that a small aperture may cause dust marks and light refraction on the lens and CCD. - ** Shutter Speed **: Choose according to the scene dynamic. For example, the daytime scenery can be set to more than 1/60 seconds. The starry sky delay may take several seconds or even longer. - ** Isox **: As low as possible (such as Isox 100 or 200) to reduce noise and maintain fine image quality. When the light is insufficient, it can be increased appropriately but pay attention to noise control. 3. ** Shooting interval settings ** - If the camera has an interval shooting function, enable it in the menu. The shooting start time can be set to 3 - 5 seconds to eliminate the effect of camera vibration when the shutter is pressed. The shooting interval should be calculated according to the expected final playback speed and shooting time. For example, if you want to play 24 frames per second, the shooting interval should be a multiple of 1/24 seconds, usually ranging from 2 to 30 seconds, depending on the speed of the scene change. If the camera does not have this function, you can set the interval time between each shot through the INT LV option of the external programmed shutter release (such as the Yongnuo MC -36b). For example, when shooting the city traffic and pedestrians during the day, the interval can be set to 1 second; when shooting the city traffic at night, the interval can be set to 2 - 5 seconds; when shooting the sky cloud movement, it can be adjusted according to the cloud speed. If the cloud movement is slow, the interval will be longer. ** 3. Shooting Techniques ** 1. ** In terms of stability ** - ** Tripod **: Make sure the tripod is stable. If necessary, mount it with a heavy object to increase stability. Pay special attention to windy or uneven terrain. Use a tripod head to block the wind or install additional windshields. - ** Focus and composition **: Focus on the point of interest manually. After locking the focus, turn off the autofocus to prevent the focus from drifting. Carefully arrange the elements of the picture, considering the relationship between the motion trajectory of the dynamic subject and the background and background. 2. ** White Balance and Color ** - ** Fixed white balance **: You can set manual white balance or custom color temperature to maintain the color of the entire sequence. It was convenient to adjust the white balance, exposure, and other fine adjustments in the later stages of shooting in the RAW format. 3. ** Storage and Power ** - ** Memory Card **: Make sure the card has enough capacity to store all the photos and is a high-speed card to reduce the write delay. - ** Spare battery **: Time-lapse photography takes a long time. Carry a spare battery to prevent interruption. ** 4. Post-production ** 1. ** import and sort ** - Use a video editing software (such as Adobe Premiere Pro, Final Cut Pro, etc.) to import the photos, select the "image sequence" option, and the software will automatically arrange them in time order. Set a reasonable frame rate according to the shooting interval, such as 24fps, 30fps, or higher. 2. ** Adjusting and Stabilizing ** - ** Color correction **: Unify the color of the photo. You can perform tone imaging, contrast adjustment, etc. If there was any slight movement during the shooting, use the stability function of the video editing software to correct it. 3. ** Editor and output ** - Remove unnecessary beginnings and endings, and add elements such as transition and music according to creativity. Choose a high-quality programmer (such as H.264), set the appropriate bit rate and resolution, and export the final delayed video. Read more exciting novels for free
Using a DSLR time-lapse photography
Time-lapse photography with a DSLR required early planning, parameters setting, shooting techniques, and post-production. ** I. Pre-planning and preparation ** 1. ** Choose a theme and plan ** - Decide on topics that have obvious dynamic changes, such as cloud movement, sunrise and sunset, urban traffic, construction, or plant growth. - The estimated total shooting time, the estimated number of shots, and the required shooting interval were calculated based on these. For example, if you wanted to record changes of a specific duration, the shooting interval was determined by the multiple of the number of frames played per second. 2. ** Equipment and accessories ** - ** Cameras **: Choose a digital single-lens reflex camera with manual mode and B-door (long exposure) function. - ** Shot **: Choose the focal length according to the shooting theme. Wide-angle lenses were suitable for shooting large scenes, and telephoto lenses were suitable for compressing the sense of space. - ** Tripod **: The tripod must be strong and stable to ensure that the camera remains motionless throughout the entire shooting process. - Shutter release or remote control: It is used to reduce the vibration caused by touching the camera, so as to accurately control the shooting process. If the camera did not have an interval shooting function, it could be connected to an external smart timer. ** 2. Setting the parameters ** 1. ** Shooting Mode ** - ** Manual Mode (M)**: This mode can ensure that the exposure parameters are consistent throughout the entire shooting process. - ** Aperture priority mode (A-grade)**: When the light changes greatly, the camera will automatically adjust the shutter speed when the aperture value is fixed. 2. ** Exposing parameters ** - Aperture: Usually choose a smaller aperture (such as f/8 - f/16) to obtain a larger depth of field to ensure that the front and back scenes are clear. However, it was also necessary to pay attention to the dust marks on the lens and CCDs and the light refraction problems that may be caused by the smaller aperture. - ** Shutter Speed **: Choose according to the scene dynamic. For example, the daytime scenery could be set to more than 1/60 seconds, and the starry sky delay could take a few seconds or even longer. - ** Iso-level: Set it to a low value (such as 100 or 200) to reduce noise and maintain fine quality. When the light is insufficient, it can be increased appropriately, but you must pay attention to controlling the noise. 3. ** Shooting interval settings ** - Activate the camera's interval shooting function (if available). Setting the shooting start time to 3 - 5 seconds can eliminate the effect of camera vibration when the shutter is pressed. The shooting interval was calculated according to the expected final playback speed and shooting time. It usually ranged from 2 to 30 seconds, depending on the speed at which the scene changed. For example, if you want to play 24 frames per second, the shooting interval should be a multiple of 1/24 second. ** 3. Shooting Techniques ** 1. ** Stable ** - ** Lock tripod **: Make sure the tripod is stable. If necessary, use a heavy object to increase stability, especially in windy or uneven environments. - ** Windproof measures **: Use the tripod head's damp or install additional windproof plates to reduce the impact of wind on the camera. 2. ** Focus and composition ** - ** Manual Focus **: Focus on the point of interest in advance. Turn off the autofocus after locking the focus to prevent the focus from drifting during the shooting process. - ** Fine composition **: Carefully arrange the elements of the picture, considering the movement trajectory of the dynamic subject and the relationship between the background and the background. 3. ** White Balance and Color ** - ** Fixed white balance **: Set manual white balance or custom color temperature to maintain the color of the entire sequence. - ** Shooting in raw format **: This allows for more detailed adjustment of white balance, exposure, etc. in the later stages. 4. ** Storage and Power ** - ** Ample Memory Card **: The card capacity is guaranteed to be enough to store all the photos, and a high-speed card is used to reduce the write delay. - ** Spare battery **: Since time-lapse photography takes a long time, carrying a spare battery can prevent interruption. ** 4. Post-production ** 1. ** import and sort image sequences ** - Use a video editing software (such as Adobe Premiere Pro, Final Cut Pro, etc.) to import the photos, select the "image sequence" option, and the software will automatically arrange them in time order. Set a reasonable frame rate according to the shooting interval, such as 24fps, 30fps, or higher. 2. ** Adjusting and Stabilizing ** - ** Color correction **: Unify the color of the photo, and perform tone map and contrast adjustment as needed. - ** Stabilize the image **: If there is any slight movement during the shooting process, use the stabilization function of the video editing software to correct it. 3. ** Editor and output ** - Cut out unnecessary opening and closing parts, and add elements such as transition and music according to creativity. Choose a high-quality programmer (such as H.264), set the appropriate bit rate and resolution, and export the final time-lapse video. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Time lapse photography
Time-lapse photography was a technique that compressed time, also known as time-lapse photography. In Kaifeng, one could take time-lapse photography of various subjects, such as shooting the city scenery of Kaifeng, the Chrysanthemum Festival, and so on. If you use a mobile phone to shoot, you have to make preparations before shooting. First, choose a picture that combines movement and stillness, such as a combination of people and buildings, traffic and buildings, etc. Second, turn on the flight mode to avoid phone calls and information disturbances and change the direction of the view. Third, prepare a power bank because it consumes a lot of power to shoot videos for a long time. Fourth, reserve the storage space of the mobile phone. Long-term videos take up more space. Fifth, if you need to shoot a slow-motion silk water time-lapse video, you can prepare a phone's ND dimmer to reduce the exposure. Sixth, if you need to shoot a moving time-lapse video within a certain range, you need to prepare a stabiliser or slide rail to assist in the shooting. Take the Huawei Mat40 Pro + as an example. Its time-lapse photography function supports custom camera parameters. When shooting, you can adjust the parameters according to the scene. For example, when shooting a time-lapse video of flowing water, you can first use the flowing water function to take a time-lapse photo with a 10s exposure, then switch to the wide-angle lens equipped with the ND dimmer lens, adjust the parameters to 6s exposure, 5000K white balance, and pull the focus to the farthest, and then start shooting. In terms of settings, you can choose the speed corresponding to the effect of flowing water (such as 90x), set the recording duration (you can choose unlimited time), or set the Pro (professional mode under time-lapse photography) to adjust the parameters according to the scene. If you used a single-lens reflex camera to take photos and then stack them into a video, you had to fix the camera, set the parameters, and take 200 - 300 photos in a row (more is also possible). Then, due to lighting, wind, and other reasons, you might need to remove the flash in the LRTimlapse software (before removing the flash, you need to convert the RAW format to JPG). Finally, you could use the previous software, or in the Premiere or AE, import the photos, create a new sequence, and make a time-lapse video. Add background music and a username. However, this method was very time-consuming in the later stages, and it had extremely high requirements for the computer configuration. If the phone didn't have a time-lapse camera function, it could also use the video recording function in the phone to shoot ordinary videos for an hour or more. Then, the video would be transferred to the editing app. The speed would be changed, and the long video would be compressed into a Short videos of about 10 seconds, with music and subtitles added. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Time-lapse photography of Earth
There were many ways and results to time-lapse photography on Earth. For example, the photographer used the equator to offset the changes in the starry sky caused by the Earth's rotation by rotating at a constant speed, thus capturing the Earth's rotation. NASA's astronaut Christina Kirk took time-lapse photos of the Earth and other stars from Namibia to the Red Sea from the International Space Station. A total of 400 photos were used. The duration was 11 minutes, and the orbit of the stars, ground light sources, lightning in thunderstorms, atmospheric glow, and the orbit of artificial satellites could be seen. The Japanese weather satellite, Sunflower 8, took more than 24 hours to take photos and was produced into a 12-second time-lapse video by Charlie Loyd, a satellite imaging expert at Mapbox. The Western Pacific Ocean, Australia, some parts of Asia, Antarctica, and Antarctica could be seen. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Time-lapse photography on the Bund
In layman's terms, time-lapse photography was to first take photos at a lower frequency or record videos at a lower frame rate, and then play the images at a normal or faster speed. For example, there was a time-lapse video of Magic City on the Bund. It was the first time to try time-lapse photography with a DSLR as the main equipment. It mainly used fixed camera positions and large-scale moving time-lapse, and some of the materials were shot with an iPhone. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Azeroth in time-lapse photography
Some players from the Chinese server created time-lapse photos of Azeroth to celebrate the 10th anniversary of World of Warcraft. The player spent 15 months traveling through more than 300 map scenes, taking more than 130,000 pictures, and accumulating 200GB of material to create this magnificent work. This demonstrated the application of time-lapse photography in recording the world of Azeroth, compressing the slow process of landscape changes and scene changes in Azeroth into a relatively short period of time to present a unique visual effect. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Time-lapse photography, shooting clouds
Here are some key points for time-lapse photography: - [Equipment and preparation: You can use a mobile phone. If possible, you can equip it with a stand or a 720 cloud mobile phone electric head (in addition to special shooting functions, it can also act as a common video shooting stabilizing device).] - Shooting operation: Find the time-lapse photography function in the camera, turn on the 0.5x super wide angle (an operation method), point the lens towards the sky, click the sky focus and press and hold to lock the exposure, then click start shooting. The phone had to be fixed when shooting, and it could be kept stable with the help of a stand. In terms of shooting time, half an hour was better, and about 10 - 30 minutes was fine. - Effect optimization: If you want to achieve the realistic feeling of clouds moving, you can change the speed when editing the video. For example, 6x speed can show the feeling of clouds galloping and electricity galloping. If you wanted to create the effect of the cloud moving fast and the person moving slowly, you could shoot a video of the character after shooting the cloud (such as a video of the character sitting and looking up at the sky). Then, you could use the editing software to import the two videos, turn off the original sound, cut the cloud video into a picture-in-picture, choose a linear mask, adjust the mask line to the intersection of the character and the sky, pull a little feather to blend the image, and finally add music to export. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Time-lapse photography location in Fuzhou
Time-lapse photography sunrise parameters
Here are some suggestions for setting the parameters of the sunrise time-lapse photography: 1. ** Mode selection **: Set the camera to Manual Mode (M), so that you can adjust the aperture, shutter speed, and other parameters. 2. ** Exposing Time **: Usually set it between 1 to 2 seconds to ensure that the photo is not too bright or dim. 3. ** Aperture setting **: It is recommended to set it between f/8 and f/16 to obtain a large depth of field and moderate exposure. 4. ** Iso-value **: Adjusts according to the lighting conditions of the shooting environment. The light will gradually increase at sunrise. At the beginning, the Iso-value can be set to 100 - 400. As the sunrise becomes brighter, the Iso-value can be reduced appropriately. 5. ** White balance setting **: Can be set to automatic or sunlight mode. 6. ** Shooting interval **: It depends on the sunrise speed and the desired effect. It is usually recommended to be between 5 to 10 seconds. For example, if you want to shoot a one-hour sunrise delay and want the final video frame rate to be 30fps, you need to shoot about 1080 pictures (30fps×60s×6min = 1080), and the interval between each picture is about 3.3 seconds (3600s × 1080 = 3.3 s). <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
How to cut time-lapse photography
In the clip, he imported a video material with the sky and clicked to add his favorite music. After selecting the video, he clicked on the variable speed and selected the " customize " option in the curve variable speed. Then, he added four points between the five variable speed points and pulled down all four points to 0.1 times the speed. Then, he adjusted all the previous five points to 5 times the speed. He clicked the tick and shortened the length of the video material to 5 seconds. Then, he could complete a variable speed. Or, import the video material that had been shot into the editing screen, click "Start Creation", import the video material that needed to be colored and drag it onto the timeline to ensure the continuity of the video editing. Video files with different lighting and background colors could be edited separately. After that, he clicked on the " filter " or " adjustment " option in the bottom of the tool bar to enter the color adjustment interface. You can also use the editing on your phone or computer to adjust the color saturation and contrast to enhance the visual effect. Add suitable background music and environmental sound effects to match the rhythm of the picture to enhance the overall atmosphere. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Apple camera time-lapse photography
The time-lapse feature of the Apple camera had the following effects: ** 1. Record the dynamic changes of natural phenomena ** 1. ** Capture the magnificent process of sunrise and sunset ** - The long sunrise or sunset process could be condensed into a short video, showing the wonderful changes in the sky as the sun slowly rose or set, as well as the trajectory of light gradually moving on the ground, buildings, and water. 2. ** Record the flow of clouds ** - For fast-moving clouds, it could be shot at a short interval to show the dynamic changes of the clouds, such as the gathering, dissipation, and change of shape of the clouds, creating a poetic and artistic picture. 3. ** Showing the mysterious trajectory of the starry sky ** - When taking a time-lapse shot of the starry sky at night, it could record the trajectory of the stars in the night sky, showing the mystery and beauty of the vast universe, allowing the viewer to feel the rotation of the Earth and the vastness of the universe. ** 2. A dynamic scene showing the life of the city ** 1. ** Shooting city traffic and crowds ** - With a time interval of 1 - 2 seconds, it could record the busy scene of the city streets. The vehicles shuttled like flowing lights, and the crowds were bustling, showing the vitality and rhythm of the city. 2. ** Record the progress of construction ** - It could record the construction process for a long time, recording the gradual construction of the building structure and the increase in height during the entire construction process, forming a unique time-compressed visual effect. ** 3. The role in creative photography ** 1. ** Unique expression of portrait photography ** - Using time-lapse photography in portrait photography could create artistic effects. For example, taking pictures of people's expressions and movements over a period of time, or using a dynamic background to set off a still person, adding storytelling and creativity to the photos. 2. ** Creation of a gourmet visual feast ** - When it was used to shoot food, it could record the changes in the state of the food over a period of time, such as the melting of the cream on the cake, the gradual melting of the ice cream, etc., to create a visually attractive gourmet scene. ** 4. Satisfy the needs of self-expression and recording ** 1. ** Delaying selfie ** - It was a unique way of self-expression. Through time-lapse photography, one could record one's activities, expression changes, etc. over a period of time for personal memorials or creative social sharing. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>