Using a DSLR time-lapse photography
Time-lapse photography with a DSLR required early planning, parameters setting, shooting techniques, and post-production. ** I. Pre-planning and preparation ** 1. ** Choose a theme and plan ** - Decide on topics that have obvious dynamic changes, such as cloud movement, sunrise and sunset, urban traffic, construction, or plant growth. - The estimated total shooting time, the estimated number of shots, and the required shooting interval were calculated based on these. For example, if you wanted to record changes of a specific duration, the shooting interval was determined by the multiple of the number of frames played per second. 2. ** Equipment and accessories ** - ** Cameras **: Choose a digital single-lens reflex camera with manual mode and B-door (long exposure) function. - ** Shot **: Choose the focal length according to the shooting theme. Wide-angle lenses were suitable for shooting large scenes, and telephoto lenses were suitable for compressing the sense of space. - ** Tripod **: The tripod must be strong and stable to ensure that the camera remains motionless throughout the entire shooting process. - Shutter release or remote control: It is used to reduce the vibration caused by touching the camera, so as to accurately control the shooting process. If the camera did not have an interval shooting function, it could be connected to an external smart timer. ** 2. Setting the parameters ** 1. ** Shooting Mode ** - ** Manual Mode (M)**: This mode can ensure that the exposure parameters are consistent throughout the entire shooting process. - ** Aperture priority mode (A-grade)**: When the light changes greatly, the camera will automatically adjust the shutter speed when the aperture value is fixed. 2. ** Exposing parameters ** - Aperture: Usually choose a smaller aperture (such as f/8 - f/16) to obtain a larger depth of field to ensure that the front and back scenes are clear. However, it was also necessary to pay attention to the dust marks on the lens and CCDs and the light refraction problems that may be caused by the smaller aperture. - ** Shutter Speed **: Choose according to the scene dynamic. For example, the daytime scenery could be set to more than 1/60 seconds, and the starry sky delay could take a few seconds or even longer. - ** Iso-level: Set it to a low value (such as 100 or 200) to reduce noise and maintain fine quality. When the light is insufficient, it can be increased appropriately, but you must pay attention to controlling the noise. 3. ** Shooting interval settings ** - Activate the camera's interval shooting function (if available). Setting the shooting start time to 3 - 5 seconds can eliminate the effect of camera vibration when the shutter is pressed. The shooting interval was calculated according to the expected final playback speed and shooting time. It usually ranged from 2 to 30 seconds, depending on the speed at which the scene changed. For example, if you want to play 24 frames per second, the shooting interval should be a multiple of 1/24 second. ** 3. Shooting Techniques ** 1. ** Stable ** - ** Lock tripod **: Make sure the tripod is stable. If necessary, use a heavy object to increase stability, especially in windy or uneven environments. - ** Windproof measures **: Use the tripod head's damp or install additional windproof plates to reduce the impact of wind on the camera. 2. ** Focus and composition ** - ** Manual Focus **: Focus on the point of interest in advance. Turn off the autofocus after locking the focus to prevent the focus from drifting during the shooting process. - ** Fine composition **: Carefully arrange the elements of the picture, considering the movement trajectory of the dynamic subject and the relationship between the background and the background. 3. ** White Balance and Color ** - ** Fixed white balance **: Set manual white balance or custom color temperature to maintain the color of the entire sequence. - ** Shooting in raw format **: This allows for more detailed adjustment of white balance, exposure, etc. in the later stages. 4. ** Storage and Power ** - ** Ample Memory Card **: The card capacity is guaranteed to be enough to store all the photos, and a high-speed card is used to reduce the write delay. - ** Spare battery **: Since time-lapse photography takes a long time, carrying a spare battery can prevent interruption. ** 4. Post-production ** 1. ** import and sort image sequences ** - Use a video editing software (such as Adobe Premiere Pro, Final Cut Pro, etc.) to import the photos, select the "image sequence" option, and the software will automatically arrange them in time order. Set a reasonable frame rate according to the shooting interval, such as 24fps, 30fps, or higher. 2. ** Adjusting and Stabilizing ** - ** Color correction **: Unify the color of the photo, and perform tone map and contrast adjustment as needed. - ** Stabilize the image **: If there is any slight movement during the shooting process, use the stabilization function of the video editing software to correct it. 3. ** Editor and output ** - Cut out unnecessary opening and closing parts, and add elements such as transition and music according to creativity. Choose a high-quality programmer (such as H.264), set the appropriate bit rate and resolution, and export the final time-lapse video. Read more exciting novels for free
Time lapse photography
Time-lapse photography was a technique that compressed time, also known as time-lapse photography. In Kaifeng, one could take time-lapse photography of various subjects, such as shooting the city scenery of Kaifeng, the Chrysanthemum Festival, and so on. If you use a mobile phone to shoot, you have to make preparations before shooting. First, choose a picture that combines movement and stillness, such as a combination of people and buildings, traffic and buildings, etc. Second, turn on the flight mode to avoid phone calls and information disturbances and change the direction of the view. Third, prepare a power bank because it consumes a lot of power to shoot videos for a long time. Fourth, reserve the storage space of the mobile phone. Long-term videos take up more space. Fifth, if you need to shoot a slow-motion silk water time-lapse video, you can prepare a phone's ND dimmer to reduce the exposure. Sixth, if you need to shoot a moving time-lapse video within a certain range, you need to prepare a stabiliser or slide rail to assist in the shooting. Take the Huawei Mat40 Pro + as an example. Its time-lapse photography function supports custom camera parameters. When shooting, you can adjust the parameters according to the scene. For example, when shooting a time-lapse video of flowing water, you can first use the flowing water function to take a time-lapse photo with a 10s exposure, then switch to the wide-angle lens equipped with the ND dimmer lens, adjust the parameters to 6s exposure, 5000K white balance, and pull the focus to the farthest, and then start shooting. In terms of settings, you can choose the speed corresponding to the effect of flowing water (such as 90x), set the recording duration (you can choose unlimited time), or set the Pro (professional mode under time-lapse photography) to adjust the parameters according to the scene. If you used a single-lens reflex camera to take photos and then stack them into a video, you had to fix the camera, set the parameters, and take 200 - 300 photos in a row (more is also possible). Then, due to lighting, wind, and other reasons, you might need to remove the flash in the LRTimlapse software (before removing the flash, you need to convert the RAW format to JPG). Finally, you could use the previous software, or in the Premiere or AE, import the photos, create a new sequence, and make a time-lapse video. Add background music and a username. However, this method was very time-consuming in the later stages, and it had extremely high requirements for the computer configuration. If the phone didn't have a time-lapse camera function, it could also use the video recording function in the phone to shoot ordinary videos for an hour or more. Then, the video would be transferred to the editing app. The speed would be changed, and the long video would be compressed into a Short videos of about 10 seconds, with music and subtitles added. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Time-lapse photography of Earth
There were many ways and results to time-lapse photography on Earth. For example, the photographer used the equator to offset the changes in the starry sky caused by the Earth's rotation by rotating at a constant speed, thus capturing the Earth's rotation. NASA's astronaut Christina Kirk took time-lapse photos of the Earth and other stars from Namibia to the Red Sea from the International Space Station. A total of 400 photos were used. The duration was 11 minutes, and the orbit of the stars, ground light sources, lightning in thunderstorms, atmospheric glow, and the orbit of artificial satellites could be seen. The Japanese weather satellite, Sunflower 8, took more than 24 hours to take photos and was produced into a 12-second time-lapse video by Charlie Loyd, a satellite imaging expert at Mapbox. The Western Pacific Ocean, Australia, some parts of Asia, Antarctica, and Antarctica could be seen. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Time-lapse photography on the Bund
In layman's terms, time-lapse photography was to first take photos at a lower frequency or record videos at a lower frame rate, and then play the images at a normal or faster speed. For example, there was a time-lapse video of Magic City on the Bund. It was the first time to try time-lapse photography with a DSLR as the main equipment. It mainly used fixed camera positions and large-scale moving time-lapse, and some of the materials were shot with an iPhone. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Azeroth in time-lapse photography
Some players from the Chinese server created time-lapse photos of Azeroth to celebrate the 10th anniversary of World of Warcraft. The player spent 15 months traveling through more than 300 map scenes, taking more than 130,000 pictures, and accumulating 200GB of material to create this magnificent work. This demonstrated the application of time-lapse photography in recording the world of Azeroth, compressing the slow process of landscape changes and scene changes in Azeroth into a relatively short period of time to present a unique visual effect. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Time-lapse photography, shooting clouds
Here are some key points for time-lapse photography: - [Equipment and preparation: You can use a mobile phone. If possible, you can equip it with a stand or a 720 cloud mobile phone electric head (in addition to special shooting functions, it can also act as a common video shooting stabilizing device).] - Shooting operation: Find the time-lapse photography function in the camera, turn on the 0.5x super wide angle (an operation method), point the lens towards the sky, click the sky focus and press and hold to lock the exposure, then click start shooting. The phone had to be fixed when shooting, and it could be kept stable with the help of a stand. In terms of shooting time, half an hour was better, and about 10 - 30 minutes was fine. - Effect optimization: If you want to achieve the realistic feeling of clouds moving, you can change the speed when editing the video. For example, 6x speed can show the feeling of clouds galloping and electricity galloping. If you wanted to create the effect of the cloud moving fast and the person moving slowly, you could shoot a video of the character after shooting the cloud (such as a video of the character sitting and looking up at the sky). Then, you could use the editing software to import the two videos, turn off the original sound, cut the cloud video into a picture-in-picture, choose a linear mask, adjust the mask line to the intersection of the character and the sky, pull a little feather to blend the image, and finally add music to export. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Time-lapse photography location in Fuzhou
Time-lapse photography sunrise parameters
Here are some suggestions for setting the parameters of the sunrise time-lapse photography: 1. ** Mode selection **: Set the camera to Manual Mode (M), so that you can adjust the aperture, shutter speed, and other parameters. 2. ** Exposing Time **: Usually set it between 1 to 2 seconds to ensure that the photo is not too bright or dim. 3. ** Aperture setting **: It is recommended to set it between f/8 and f/16 to obtain a large depth of field and moderate exposure. 4. ** Iso-value **: Adjusts according to the lighting conditions of the shooting environment. The light will gradually increase at sunrise. At the beginning, the Iso-value can be set to 100 - 400. As the sunrise becomes brighter, the Iso-value can be reduced appropriately. 5. ** White balance setting **: Can be set to automatic or sunlight mode. 6. ** Shooting interval **: It depends on the sunrise speed and the desired effect. It is usually recommended to be between 5 to 10 seconds. For example, if you want to shoot a one-hour sunrise delay and want the final video frame rate to be 30fps, you need to shoot about 1080 pictures (30fps×60s×6min = 1080), and the interval between each picture is about 3.3 seconds (3600s × 1080 = 3.3 s). <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
How to cut time-lapse photography
In the clip, he imported a video material with the sky and clicked to add his favorite music. After selecting the video, he clicked on the variable speed and selected the " customize " option in the curve variable speed. Then, he added four points between the five variable speed points and pulled down all four points to 0.1 times the speed. Then, he adjusted all the previous five points to 5 times the speed. He clicked the tick and shortened the length of the video material to 5 seconds. Then, he could complete a variable speed. Or, import the video material that had been shot into the editing screen, click "Start Creation", import the video material that needed to be colored and drag it onto the timeline to ensure the continuity of the video editing. Video files with different lighting and background colors could be edited separately. After that, he clicked on the " filter " or " adjustment " option in the bottom of the tool bar to enter the color adjustment interface. You can also use the editing on your phone or computer to adjust the color saturation and contrast to enhance the visual effect. Add suitable background music and environmental sound effects to match the rhythm of the picture to enhance the overall atmosphere. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
The camera blooms, time-lapse photography
Here are the steps to use the camera to take time-lapse photography: ##I. Initial Planning and Preparing 1. ** Thesis and Plan ** - The theme was flowers blooming. The estimated total length of time for the flowers to bloom, for example, from the bud to the full bloom, might take several hours to several days. The shooting interval was calculated based on the total length and the number of shots he wanted. For example, if the blooming process is expected to last for 24 hours and you want to take 1440 photos (assuming that the final video is played at 30 frames per second), then the shooting interval is 1 minute. 2. ** Equipment and accessories ** - [Cameras: Choose a DSLR, micro-camera, or advanced portable camera with manual mode and B-door (long exposure) function.] - [Shot: Choose a suitable focal length according to the scene where the flowers bloom.] If you were shooting a big scene of a whole plant blooming, you could choose a wide-angle lens, but if you wanted to close-up the details of the flower, a telephoto lens was more suitable. - Tripod: A strong and stable tripod was needed to ensure that the camera would not shake during long shots. - Shutter release or remote control: used to reduce the vibration caused by touching the camera and precisely control the shooting process. - Timer or interval shooting function: If the camera does not have a built-in interval shooting function, it can be connected to an external smart timer. ##2. Setting the parameters 1. ** Shooting Mode ** - Manual Mode (M): This would ensure that the exposure parameters were consistent throughout the entire shooting process. However, if the lighting changed greatly, the camera could also choose Aperture priority mode (A). The aperture value was fixed and the camera automatically adjusted the shutter speed. 2. ** Exposing parameters ** - Aperture: Usually choose a small aperture (such as f/8 - f/16), which can obtain a larger depth of field and ensure that the flowers and the surrounding environment are clear. - [Shutter speed: Because the blooming of flowers is a relatively slow process, daytime shooting can be set to 1/60 seconds or more.] If it is in a dark environment, such as indoors or at night (if there are flowers), you may need to reduce the shutter speed appropriately, but be careful to use a tripod to maintain stability. - <strong></strong><strong></strong>If the light is insufficient, it can be increased appropriately, but pay attention to controlling the noise. 3. ** Shooting interval settings ** - Turn on the interval shooting function: Find and activate the interval shooting mode in the camera menu. - [Shooting start time: Set it to 3 - 5 seconds to eliminate the effect of camera vibration when the shutter is pressed.] - [Shooting interval: calculated based on the expected final playback speed and shooting duration.] For example, if you want to play 30 frames per second, the shooting interval should be a multiple of 1/30 second. If the blooming process is slow, you can set the interval to between 5 to 30 minutes. ##3. Shooting Techniques 1. ** Stable ** - Lock the tripod: Make sure the tripod is stable. If necessary, use a heavy object to increase stability. If there was wind in the shooting environment, you could use the tripod head to reduce the impact of the wind on the camera. 2. ** Focus and composition ** - Manual Focus: Focus on the flower in advance, lock the focus and turn off the autofocus to avoid focus drift during the shooting process. - Fine composition: Carefully arrange the elements of the picture, taking into account the changes in the shape of the flowers during their blooming process, as well as the relationship between the background and the flowers. 3. ** White Balance and Color ** - Fixed white balance: Set manual white balance or custom color temperature to maintain the color stability of the entire sequence. - It is recommended to shoot in the RAW format, so that you can make more detailed adjustments to the white balance, exposure, etc. in the later stages. 4. ** Storage and Power ** - Enough memory card: Make sure the card capacity is enough to store all the photos, and use a high-speed card to reduce the write delay. - [Spare battery: Since the time-lapse shooting may last for a long time, bring a spare battery to prevent interruption.] ##4. Post-production 1. ** import and sort ** - Use a video editing software (such as Adobe Premiere Pro, Final Cut Pro, etc.) to import the photos. Make sure to select the "image sequence" option, and the software will automatically arrange them in time order. - Fragment rate setting: Set a reasonable frame rate according to the shooting interval, such as 30fps or higher. 2. ** Adjusting and Stabilizing ** - Color correction: Unify the color of the photo, and if necessary, perform tone imaging, contrast adjustment, etc. - Stabilize the image: If there is any slight movement during the shooting process, use the video editing software's stabilization function to correct it. 3. ** Editor and output ** - [Material editing: Remove unnecessary beginnings and endings, and add elements such as transition and music according to creativity.] - Video Encode: Choose a high-quality programmer (such as H.264), set the appropriate bit rate and resolution, and export the final delayed video. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
That camera has time-lapse photography
DSLR, micro-camera, or high-end portable cameras with manual mode and B-door (long exposure) function usually had time-lapse photography. In addition, mobile phones such as the iPhone also had a time-lapse photography function. You could directly turn on the camera and choose time-lapse photography to shoot. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>