350 I-beam specifications and models
In the national standard, there was no 350 standard for I-beams. The novel " Watching the Moon on Fish Island " is equally exciting. Everyone is welcome to click and read it!
Soul of Searing Steel
No. 25 I-beam specifications
The specifications of the No. 25 I-beam were as follows: - Model: 25# - [Theoretic weight: 3.46kg/m] - Cross Section Area: 4.43cm <2> - Moment of inertia: Iy = 2.16cm, Iz = 0.87cm - Bending strength: Wy = 1.80cm cubic, Wz = 0.73cm cubic - Torsional strength: J = 0.43cm - Section characteristic radius: ry = 1.08cm, rz = 0.62cm - Cross section inertia radius: iy = 1.08cm, iz = 0.62cm - Section module: Wely = 1.08cm cubic, Welz = 0.44cm cubic - Collapsing strength of section: Wpi = 2.90cm <3> - It was 250 mm high, 116 mm wide, 8 mm thick, and weighed 38.105 kg/m. The novel "Watching the Moon on Fish Island" is equally exciting. Everyone is welcome to click and read it!
I-beam specifications and price
The following are the specifications and price information of some 250 I-beams: - Yunnan Kunming BenChuang directly sold Q235 I-beam and 250 I-beam. The exact specifications of the price were not mentioned, but the price was 3.05. - Hangzhou spot low alloy zinc-plated I-beam No. 10 250*116*8 I-beam Q235B, the price is $2.86. - The steel manufacturer in foshan supplied 32a hot-rolled i-beam, 9 meters, and 250*166 zinc-plated i-beam for building curtain walls, with a price of 3.75. - Tang Shan Q235B Jinxi I-beam international standard non-standard 250*116* 8. 0I-beam I-beam manufacturer, the price is $6.5. - On December 1, 2024, the price of 20-thick I-beams (not clear whether it was 250-thick I-beams, but it could be used as a reference) was 2580 yuan, pure I-beams (15 thick) were 2530 to 2570 yuan, and I-beams (10 thick) were 2460 yuan. - June 10, 2020, No. 25a I-beam Q235B Tang Steel 25a #I-beam 250 I-beam 250*116*8.0 I-beam, the price is 3700.00/ton. The novel "Watching the Moon on Fish Island" is equally exciting. Everyone is welcome to click and read it!
50A I-beam specifications, model size
The specifications and dimensions of the 50A I-beam were as follows: height 500mm, leg width 158mm, waist thickness 12mm, middle thickness 20mm, inner arc radius 14mm, and leg end arc radius 7mm. The novel " Watching the Moon on Fish Island " is equally exciting. Everyone is welcome to click and read it!
T-shaped steel specifications, models and size
There were many types of T-shaped steel due to different production processes, and the specifications were expressed differently: 1. ** Hot-rolled T-shaped steel **: - It is represented by height H, width B, web thickness t1, and wing plate thickness t2. For example, T-shaped steel Q235B or SS400220 *220*10*14 is represented as a T-shaped steel with a height of 220mm, a width of 220mm, a web thickness of 10mm, and a wing plate thickness of 14mm. - There are size such as 25*25*3.0 (Each weighing 7.065KG, length 6m), 30*30*3.0 (Each weighing 8.478KG, length 6m), 30*30*4.0 (Each weighing 11.304KG, length 6m), 35*35*3.5 (Each weighing 11.54KG, length 6m), 40*40*4.0 (Each weighing 15.072KG, length 6m), 40*40*5.0 (each weighing 18.84KG, length 6 meters), 45*45*5.0 (each weighing 18kg, length 5 meters), 50*50*5.0 (each weighing 20kg, length 5 meters), 60*60*6.0 (each weighing 39.564KG, length 7 meters), 60*36*6.0 (each weighing 27.13KG, length 4 meters), etc. - There were also special-shaped hot-rolled equal-thickness T-shaped steel with specifications such as 130*130*14*14/140*140*15*15/150*150*16* 16mm, and special-shaped bolted T-shaped steel specifications such as 135*100*12*14/155*100*14* 14mm. 2. ** T-shaped steel directly split from H-shaped steel **: - It was divided into wide flange-split T-shaped steel (TW), middle flange-split T-shaped steel (TL), and narrow flange-split T-shaped steel (TN). The representation method was to first use the symbols TW, TL, and TN to represent the type of T-shaped steel, followed by "height (mm)× width (mm)". For example, TN225×200 represented a narrow flange-split T-shaped steel with a cross-section height of 225mm and a flange-width of 200 mm. The novel "Watching the Moon on Fish Island" is equally exciting. Everyone is welcome to click and read it!
Square tube specifications, models size sizes
There were many size and sizes of square tubes. The common specifications were 15× 15mm, 25× 25mm, 40× 40mm, 70× 70mm, 100× 100mm, 130× 130mm, 175× 175mm, 280× 280mm, etc. The thickness of the walls varied, ranging from 0.6 - 2.0 mm to 4.0 - 12 mm. In terms of stock, square tubes were mostly large in size, ranging from 10×10×0.8 - 1.5 to 500×500×10 - 25. There were several common square tube size in daily life, such as 20×20× 1.2mm, 40×40× 2.5mm, 50×50× 3mm, 60×40× 3mm, 100×60× 4mm, etc. The thickness of the square tube ranged from 1.0 mm to tens of millimeters. The novel " Watching the Moon on Fish Island " is equally exciting. Everyone is welcome to click and read it!
Finished H-shaped steel specifications, models, and weights
The following is the specifications and weight of some H-beam steel: - Under the international standards (implementing the national standard of 11263 - 1998), there were specifications such as the wide wing type, such as 100×100, 125×125, etc., but the corresponding weight was not given. - Common specifications were H100*100*6*8, unit weight 17.2kg/m, cross-section area 21.9mm2;H125*125*6.5*9, unit weight 23.8kg/m, cross-section area 30.31mm2;H150*150*7*10, unit weight 31.9kg/m, cross-section area 40.55mm2;H175*175*7.5*11, unit weight 40.3kg/m, cross-section area 51.43mm2; H200*200*8*12, unit weight 50.5kg/m, cross-section area 64.28mm2, etc. - For the European standard, for example, the 100-meter weight of HFA is 16.7KG, and the 100-meter weight of HEB is 20.4KG; the 120-meter weight of HFA is 19.9KG, and the 120-meter weight of HEB is 26.7kg; the 140-meter weight of HFA is 24.7KG, and the 140-meter weight of HEB is 33.7KG; the 160-meter weight of HFA is 30.4KG, and the 180-meter weight of HEB is 51.2kg; the 180-meter weight of HFA is 35.5KG, and the 180-meter weight of HEB is 51.2kg; the 200-meter weight of HFA is 42.3KG, and the 200-meter weight of HEB is 61.3KG ; The weight of the HFA 220 meters was 50.5 kg, the weight of the HEB220 meters was 71.5 kg; the weight of the HFA 240 meters was 60.3 kg, the weight of the HEB 240 meters was 83.2 kg; the weight of the HFA 260 meters was 68.2 kg, the weight of the HEB 260 meters was 93 kg; the weight of the HFA 280 meters was 76.4 kg, the weight of the HEB280 meters was 103KG; the weight of the HFA 300 meters was 88.3 kg, the weight of the HEB300 meters was 117KG; the weight of the HFA 400 meters was 125KG, the weight of the HEB 400 meters was 155 kg; the weight of the HFA 500 meters was 155 kg, the weight of the HEB 500 meters was 187KG; The 600-meter weight of the HEA was 178KG, while the 600-meter weight of the HEB was 212KG. The novel "Watching the Moon on Fish Island" is equally exciting. Everyone is welcome to click and read it!
H-shaped steel specifications, models size dimensions
The specifications of H-shaped steel were expressed as H (height) ×B (width) ×t1 (web thickness) ×t2 (wing thickness). For example, the 150×150 model could be expressed as 150×150×7×10, the 250×175 model could be expressed as 244×175×7×14, and the H800 ×300×14×26. In addition, there was an international size and theoretical weight table (executing the national standard for weight measurement). H-shaped steel was categorized into different types such as wide wing HH, middle wing HH, narrow wing HN, thin-wall H-shaped steel HH, and pile H-shaped steel HP. There were many combinations of height and width under different types. For example, wide wing HH had different sizes such as 100×100, 125×125, 150×150, and 175×175. The novel "Watching the Moon on Fish Island" is equally exciting. Everyone is welcome to click and read it!
H-shaped steel specifications, models and weight list
The following are the specifications, models and weights of some H-shaped steel: - National standard H-shaped steel: - 100*100*6*8 specifications, unit weight 17.2kg/m, cross-section area 21.9mm2. - 125*125*6.5*9 specifications, unit weight 23.8kg/m, cross-section area 30.31mm2. - 150*150*7*10 specifications, unit weight 31.9kg/m, cross-section area 40.55mm2. - 175*175*7.5*11 specifications, unit weight 40.3kg/m, cross-section area 51.43mm2. - 200*200*8*12 specifications, unit weight 50.5kg/m, cross-section area 64.28mm2. - European standard/British standard/German standard H-shaped steel: - The specifications include HEA100-HEA1000, HEB100-HEB1000, HP200*53.5 -HP 400 * 231, HD 260 *68 - HD400*231, UA 127 *76 -UA 1016*305, UA 127*76 -UA 356 * 368, UA 203*203 -UA 356*368, and UA 920*344 -UA 1100. Its implementation standards are EN10025 - 2, EN10025 - 4, and EN10025 - 5. The materials are S235JR/J0, S275JR/J0/J2, S355JR/J2/K2/M/TL/TL/J0XP/J2XP/J0W/J2W, S450J0, and S460M. - British Standard H-shaped Steel (Part): - UC152 *152*23 (152.4*152.2*5.8*6.8) weighed 23 kilograms per meter. - UC152 *152*30 (157.6*152.9*6.5*9.4) Each meter weighed 30 kilograms. - UC152*152*37（161.8*154.4*8*11...）。 The novel "Watching the Moon on Fish Island" is equally exciting. Everyone is welcome to click and read it!
U-shaped steel specifications, models, dimensions, weight table
The following is a list of some U-shaped steel specifications, models, size and weights: - U8: width 80mm, waist thickness (tooth pitch) 8mm, leg thickness 4.5mm, waist height 42mm, theoretical weight 9.46kg/m. - U10: width 100mm, waist thickness (tooth pitch) 10mm, leg thickness 5mm, waist height 48mm, theoretical weight 12.0kg/m. - U12.5: width 125mm, waist thickness (tooth pitch) 12.5mm, leg thickness 6mm, waist height 58mm, theoretical weight 15.8kg/m. - U13.5: width 135mm, waist thickness (tooth pitch) 13.5mm, leg thickness 6.5mm, waist height 65mm, theoretical weight 17.0kg/m. - U15: width 150mm, waist thickness (tooth pitch) 15mm, leg thickness 7.5mm, waist height 75mm, theoretical weight 19.0kg/m. - U18: width 180mm, waist thickness (tooth pitch) 18mm, leg thickness 9mm, waist height 85mm, theoretical weight 22.0kg/m. - U20: width 200mm, waist thickness (tooth pitch) 20mm, leg thickness 10mm, waist height 95mm, theoretical weight 26.0kg/m. - U25: width 250mm, waist thickness (tooth pitch) 25mm, leg thickness 12mm, waist height 110mm, theoretical weight 32.0kg/m. - U29: width 290mm, waist thickness (tooth pitch) 29mm, leg thickness 14mm, waist height 124mm, theoretical weight 38.9kg/m. - U36: width 360mm, waist thickness (tooth pitch) 36mm, leg thickness 17mm, waist height 138mm, theoretical weight 52.7kg/m. The theoretical weight of some special specifications of U-shaped steel was as follows: - The theoretical weight of the 18UY was 18.96kg/m. - The theoretical weight of the 25UY was 24.76kg/m. - The theoretical weight of 25U was 24.95kg/m. - The theoretical weight of 29U was 29.00kg/m. - The theoretical weight of 26U was 35.87kg/m. - The theoretical weight of 40U was 40.05kg/m. Cold-formed U-shaped steel, large-sized U-shaped steel, U-shaped steel for cars, and hot-dip Galvanized U-shaped steel had the following weight specifications: 8kg/m, 11kg/m, 12kg/m, 15kg/m, 18kg/m, 22kg/m, 24kg/m, 30kg/m, 38kg/m, 43kg/m, 50kg/m, 60kg/m, Qu70, Qu80, Qu100, Qu120. Some of the U-shaped steel had size of 50×30×15×2.0mm, 63×40×15×2.3mm, etc. The novel "Watching the Moon on Fish Island" is equally exciting. Everyone is welcome to click and read it!
H-shaped steel specifications, models, dimensions size diagrams
The representation of H-shaped steel included the height, width, and thickness of the web and wing plates. For example, the 150*150 model could be expressed as 150*150*7*10, the 250*175 model could be expressed as 244*175*7*14, and the size of 200 * 200 * 8 * 12 mm could be expressed as H-shaped steel with a height of 200 mm, a width of 200 mm, a web thickness of 8 mm, and a wing thickness of 12 mm. For example, UC305x305x97 had a web height of 307.9, a width of 305.3, a web thickness of 9.9, and a thickness of 15.4; UC305x305x118 had a web height of 314.5, a width of 307.4, a web thickness of 12, and a thickness of 18.7. The low-alloy 500×500×25× 25mm heavy-duty H-shaped steel produced by Masteel was also expressed in this way, where 500× 500mm represented the height and width, and 25× 25mm represented the thickness of the web and wing plate respectively. The novel " Watching the Moon on Fish Island " is equally exciting. Everyone is welcome to click and read it!