Single lens reflex camera food parameters mode
The following are some parameters that can be used as a reference when shooting food with a DSLR: - ** Aperture **: - You can choose a large aperture lens such as Canon EF24 - 105mm f/4LIS USM to shoot shallow depth of field. A combination of parameters such as the Iso200 100mm f/41/125s can make the food more attractive and impactful, making the subject stand out and bring a beautiful blurring effect. - If a certain depth of field is required, the aperture number can be between F8 - F16. - ** Light sensitivity (IQ)**: The value of the IQ can be between 100 - 800. For example, an IQ of 100 can guarantee the image quality and reduce noise in good lighting conditions. In a slightly dim environment, the IQ value can be appropriately increased, but an overly high IQ may cause more noise in the image. - ** Focus: - If you use a wide-angle zoom lens, such as the Canon EF24 - 105mm f/4L IS USM, you can use a 24mm wide-angle lens to capture a panoramic view of food, or you can use a 105mm telephoto lens to capture food details. - The telephoto lens could bring about a shallow depth of field effect, making the food dreamy and prominent. For example, when shooting food close-ups, the use of the telephoto lens could highlight the details of the food. - ** Shutter Speed **: For example, shutter speeds such as 1/15s, 1/250s, 1/100s, 1/125s, and 1/200s can be used for food shooting. The shutter speed needs to be determined according to the lighting conditions, the stability of the shooting (whether auxiliary equipment such as a tripod is used), etc. to ensure that the picture will not be blurred due to hand shaking or object movement (if there are dynamic elements in the picture). - White Balance: - Automatic white balance could mostly restore the color temperature of the scene, but in an environment where the light source was too complicated, it was necessary to use a custom white balance. You could use the white paper towels and tablecloths in the restaurant to correct the white balance. - Shooting in the RAW format was also one of the common methods, because the RAW format could retain more details recorded by the sensor, which made it convenient for the post-production software to accurately adjust the color temperature. Read more exciting novels for free
The parameters of a single-lens reflex camera
The following are some important settings for a DSLR camera: 1. ** Shooting Mode **: It is recommended to choose the manual mode (M). This way, you can control the shutter, aperture, sensitivity, and other parameters independently. 2. ** Video recording format and size **: If there are no special requirements, you can choose to record 1920*1080, 25 frames, MOV format of high-definition video. If there are special requirements for zooming in, you can choose 4K or other format. 3. ** Shutter Speed **: Generally, it is twice the frame rate of the video. For example, when the frame rate is 25 frames, the shutter speed is set to 50; when the frame rate is 60 frames, the shutter speed is set to 120. This way, the visual effect can be achieved. 4. ** Aperture **: The aperture size affects the depth of field of the picture. A large aperture (such as F2.8) made the picture brighter and the background blur stronger, while a small aperture (such as F11) made the picture darker and the background blur weaker. The larger the aperture value, the smaller the actual aperture. 5. ** Light sensitivity (USB)**: When there is sufficient light, the lower the USB, the better. It is not advisable to set it too high in a dark environment, otherwise it will produce noise. For example, Canon DSLR can be set to 100 during the day and 800 - 1000 at night. A high USB (greater than 2000) will produce obvious noise and it will be difficult to repair later. 6. ** Color temperature (white balance)**: adjust to manual mode. Generally, it is recommended to adjust the color temperature between 4900 and 5300. The higher the color temperature, the more yellow the screen will be, and the lower the color temperature, the more blue the screen will be. 7. ** Focus **: If you have good manual operation ability, you can try to manually focus and select the focus point. Novice or for convenience, you can use the automatic intelligent autofocus. However, it is recommended to practice manual focus more if possible. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
The parameters of a single-lens reflex camera in the studio
When shooting in the studio, the parameters of the single-lens reflex camera were set as follows: 1. ** Light sensitivity (USB)**: Due to the strong lighting in the studio, the sensitivity does not need to be too high. It can be set to a lower value, such as USB 50 or USB 100. 2. ** Metering method **: You can choose according to the subject. Matrix Metering is suitable for shooting natural scenery; Center Metering focuses on the central area of the picture, suitable for shooting portraits; Spot Metering focuses on the small area in the center of the picture. 3. ** Aperture and Shutter **: If you use the M mode, you need to set the aperture and shutter according to the light intensity in the studio and the light measurement results. You can also try taking a gray or white card, customize the white balance, check the highest sync speed of the flash, and then set the photo format. After the adjustment was completed, he could take a test shot. Then, he would connect the card to the computer and open the picture for comparison analysis and adjustment. If you use a constant light source to shoot still objects, it is recommended to use aperture priority and spot measurement. First, choose the depth of field according to the desired shooting effect, and then choose the aperture according to the depth of field. The camera will automatically match the shutter speed according to the ambient light. 4. ** White Balance **: If you use a constant light source, in order to accurately control the color temperature, it is recommended to use a gray card to correct the color temperature of the camera before taking a photo. 5. ** Lenses Setting **: Turn on surrounding brightness correction to reduce dark corners, turn on distortion correction, and select criteria for digital lens optimization. 6. ** Focus Mode **: You can set AF-ON to switch between single-shot focus, autofocus, and servo-autofocus. The setting step is to click AF-ON, then click the menu key (Menu). In the pop-up menu, choose the second camera setting from the right in the first layer of the menu. In the second layer of the menu, choose 3, and choose the custom button. Find AF-ON, which is the autofocus start button. 7. ** Image confirmation **: Generally, 2 seconds is enough. You can check the rough effect of the photo after the shooting. 8. ** High Iso-noise reduction setting **: If you are in an extremely dark environment without a lamp or tripod, you can set a high Iso-noise reduction setting to adjust the brightness of the screen. However, this method is not a long-term solution. If the environment is not bright enough, it is best to use lighting equipment. 9. ** Release the shutter without a memory card installed **: Choose to close the shutter to avoid accidentally pressing the shutter when the memory card is not installed. 10. ** Gridline Setting **: You can set it to 3x3 gridlines for easy composition. 11. ** exposure simulation **: When exposure simulation is enabled, what you see is what you get. The image you see on the screen is basically the same as the photo. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Take the parameters of the single-lens reflex camera
The following are some parameters that can be used as a reference when shooting car tracks: 1. ** Shutter Speed **: You can choose the shutter priority mode, and the shutter speed can be adjusted to 3 - 10 seconds. When shooting the tracks on the mountain road, due to the small number of vehicles, you can use Door B to manually control the shutter speed when you see the car to record the track of the car. You can also set the shutter speed to 3 - 30 seconds. The longer the exposure time, the more obvious the effect of the tracks. 2. ** Light sensitivity (USB)**: It is recommended to set it to 100 to reduce noise and ensure image quality. In the case of insufficient light, try not to exceed 6400. If it is too dark, consider using a fill light. 3. ** Aperture **: You can use automatic adjustment first. If you use the aperture priority mode for experimental photos, you can also refer to this setting if you choose f/8 aperture to achieve a suitable exposure combination. If you are taking a group photo with a similar scene, you can also set a small aperture of about f8 to ensure the picture is clear. In addition, a tripod, shutter release, and other equipment were needed to assist in the shooting. Under long exposure, noise reduction and lens anti-shake needed to be turned off for a long time. During the shooting process, a few more photos were taken to select satisfactory photos. Later, the color temperature was adjusted appropriately to achieve a satisfactory effect of the environment. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Single lens reflex camera parameters tutorial
The following is a tutorial on setting the parameters of the DSLR camera in different shooting scenes: ** 1. Portrait Shooting ** 1. ** Still Portrait ** - ** Shooting mode **: Aperture priority mode (LV) can be used. - ** Aperture Setting **: Use a large aperture, such as F2.8, to create a blurred background effect and highlight the main character. - ** Focus **: Focus on the eyes or key parts of the character. If you want to shoot a close-up of the character, the sharpness is moderate, and you can use the middle composition. When matching the character and the background, you can use the medium aperture F8 to highlight the character and the background. The focal length is the widest. The composition uses the three-point method or the golden section method. - ** Light sensitivity (USB)**: Try to set it as low as possible, such as USB 100. 2. ** When the character moves ** - ** Shooting Mode **: Shutter priority mode (TV). - ** Shutter Speed **: Usually set to about 1/250s to avoid blurring. ** 2. Scenery Shooting ** 1. ** Shooting Mode **: You can use P or M files. 2. ** Aperture setting **: Use a small aperture, generally F5.6 or smaller, such as F8 (on sunny days, around 100, F8, 1/200; on cloudy days, around 400). 3. ** Using the camera ** - ** Wide-angle lens **: It is suitable for taking photos of large scenes, such as buildings and landscapes. It has a short focal length, wide angle of view, and deep field of view, which can produce a strong visual impact. - Medium focus lens: It has the smallest distortion in the photo, can accurately reflect the shape of the subject, and is easy to design into a large aperture. - ** Telephoto lens **: Long focal length, small angle of view, large image on the film, suitable for shooting distant objects. 4. ** Composing **: To avoid placing the most attractive scenery in the middle, you can use the three-point composition, frame composition, symmetrical composition, diagonal composition, white space composition, etc. 5. ** Note **: It is recommended to bring a tripod to prevent the photo from blurring due to shaking. ** 3. Shoot flowers and plants ** 1. ** Shooting Mode **: Aperture priority mode (LV). 2. Aperture setting: Choose a large aperture lens or a 100-millimeter lens. The aperture should be large so that the depth of field is shallow and the subject can be highlighted. 3. ** Composing **: Use a central composition or a nine-square composition to place the object you want to shoot in the center of the picture. ** 4. Pet Shooting ** 1. ** Shooting Mode **: You can turn on the P automatic gear and start continuous shooting, or use the shutter priority mode (TV). 2. ** Shutter speed (in TV mode)**: Set it to 1/200s or higher. ** 5. Shooting Night Scenery ** 1. ** Shooting Mode **: Aperture priority mode or M mode can be used. 2. ** Aperture setting **: Use a small aperture, such as F10 or smaller. 3. ** Light sensitivity (USB)**: Normally set to USB 100. 4. ** Shutter Speed **: For example, 1/30s (Shutter 1/30, Aperture F10, SPD 100). 5. ** Metering Mode **: Can be set to the Evaluation Metering Mode (Matrix Metering Mode), and the exposure compensation can be reduced appropriately. 6. ** Ancestors **: Requires a tripod. If possible, you can use the shutter release to shoot. ** 6. Silhouette Shooting ** 1. ** Shooting Mode **: P-file is fine. 2. ** Metering **: Use spot photography to measure the highlight, then add or subtract the exposure according to actual needs, and place the focal point at the bright spot. ** 7. Setting the camera parameters for other shorthand scenes ** 1. ** Exterior Portrait **: 1/100s, Iso100, F1.2 - 2.8. 2. ** In-room portrait **: 1/80s, 1500, F2.8 or below. 3. ** Baby/Pet Shooting **: Above 1/200, USB 100 - 800, F1.4 - 5.6. 4. ** Still life/gourmet photography **: 1/80s- 1/200s, USB 100 - 400, F1.2 - 4. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Instantaneous parameters of a single-lens reflex camera
When shooting the jump moment with a single-lens reflex camera, you can refer to the following parameters: 1. ** Shutter Speed **: Set it to TV mode and set the shutter speed to above 1/200S. This way, you can clearly capture the moment when the character jumps up. 2. ** Iso-level: Set it to 100 when the light is good during the day. If it is dusk or when the light is not good, you can set it to automatic to ensure that the exposure of the picture is normal. However, an increase in the Iso-level will affect the quality of the picture. 3. ** Focus Mode **: Set it to continuous autofocus. When shooting, press the shutter button and focus on the person before the person jumps. When the person jumps, the camera will focus on the person continuously to prevent the photo from blurring due to the movement of the person. This method is also suitable for shooting moving objects. 4. ** Shooting Mode **: Set it to high-speed continuous shooting. This way, you can take multiple photos for later screening. In addition, when shooting jump shots, you can also use a low angle to show that the person jumping is higher; focus on the face or body of the subject, and use a high-speed shutter to ensure that the subject is clear, it is best to use single-point focus; You can also use a tripod and adjust it to the lowest position to assist in shooting. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Single lens reflex camera track parameters
When shooting a car track with a single-lens reflex camera, you can refer to the following parameters: - <strong></strong><strong></strong> - Shutter Speed: Not a fixed value, but depends on the traffic and speed of the car. In sections with more traffic and faster speeds, the exposure time could be shortened, such as 4 seconds to 8 seconds, while in sections with less traffic and slower speeds, the shutter speed often needed to be adjusted to 15 seconds to 30 seconds. When the shutter speed did not exceed 30 seconds, the user could choose manual exposure or shutter priority mode, and when the shutter speed exceeded 30 seconds, the user could only choose B to manually control the shutter speed (usually, the shutter release was needed to control the exposure time). - Aperture: If the shutter priority mode is used, the aperture will be automatically adjusted, but try to control the aperture to around F8 - F11. You can also choose the aperture of F8.0 in the Av mode. In addition, it could be adjusted according to the actual shooting effect. In addition, when taking pictures of the train tracks, one could choose the shutter priority mode or the manual exposure mode. If you use the manual exposure mode, you can also refer to the above shutter speed, aperture, and sensitivity parameters to adjust. At the same time, a tripod was needed to fix the camera position, and the shutter release also helped with the shooting. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Single lens reflex camera mode setting
There are many modes for DSLR cameras, and the parameters of different modes have their own characteristics. The following are the common modes and their parameters: ** 1. Aperture priority mode (LV)** - ** Landscape photo taken with light **: Aperture set to F8 - F11, exposure compensation set to 0. - ** When shooting a portrait **: You can use the maximum aperture or the maximum aperture to reduce it by one stop. Spot light is used on the model's eyes, and the exposure compensation is 0. - ** Humanistic Street Shot **: If you need to blur the environment, set the aperture to F2.8 or higher; if you don't need to blur the environment, set it to F8. - ** macro shot **: Aperture: F8 - F11. - ** Shooting starlight effect **: Aperture between F8 - F11. - ** Shooting flowers, birds, insects **: Aperture should be F5.6 or below, and the best is to have an IQ of 400. ** 2. Shutter priority mode (TV)** - ** Shooting general body movements **: Shutter speed of 1/60s or above. - ** Shooting a walking object **: Shutter speed of 1/125s or above. - ** Shooting fast-moving objects **: Shutter speed of 1/500s or above. - ** Shooting a running subject **: Shutter speed of 1/1000s or above. - ** Shooting a ski subject **: Shutter speed of 1/2000s or above. - ** Shooting a bicycle **: Shutter speed of 1/2000s or above. - ** Shooting the car at normal speed **: Shutter speed of 1/2000s or above. - ** Shooting the plane taking off and landing in the distance **: Shutter speed: 1/500s. - ** Follow photography **: Shutter speed: 1/60s- 1/4s. - [Freezing Birds Near]: Shutter Speed: 1/4000s. - ** Fog Sea **: Shutter speed 1/4s or slower. ** 3. Manual Mode (M)** - ** Full Moon Shooting **: Shutter Speed: 1/500s, USB: 200, Aperture: F5.6 - F8 (Clear). - ** Crescent Moon Shot **: Shutter Speed: 1/500s, USB: 200, Aperture: F4 - F5.6 (Clear). - ** New Moon Shot **: Shutter Speed: 1/500s, USB: 400, Aperture: F4. - ** Firework Shooting **: Shutter Speed: 1s- 4s, USB: 200, Aperture: F8. - ** Lightning Shooting **: B-door, USB: 200, Aperture: F8 (The exposure should be at the end of the shooting, and the environment should be darker). - ** Street light shooting **: Shutter speed: 15s, USB: 100, Aperture: F11 (adjusted according to street brightness). - ** Shooting with boat lights on the water surface **: Shutter speed 30s, USB: 100, Aperture: F8 (adjusted according to environmental brightness). - ** Galaxy Shot **: Shutter speed: 30s, USB: 1600 - 6400, Aperture: F2.8 (with super wide angle). - ** Star Orbit Shooting **: Expose a single photo for 30 seconds, take the next photo every 1 second, take at least 120 photos, and stack them later. - ** Shooting Flower **: Shutter speed: 1/125s, Aperture: F2.8, Iso-level: 100 (sunny weather). - ** Scenery Shooting **: Shutter Speed: 1/125s, Aperture: F4, Iso-level: 100 (sunny weather). - ** Shooting Night Scenery **: Shutter Speed: 1/15s, Aperture: F1.8, Iso200. - ** Shooting a moving object **: Shutter speed: 1/500s, aperture: F2.4, and the CPU: 100. - ** Wedding room shooting **: Shutter speed: 1/125s, aperture: F2.8 - F8, and the camera's CPU: 400. In addition, for different shooting scenes, there are some specific parameters: - ** Portrait shooting (large aperture or telephoto)**: If you want to shoot the background blurring effect to highlight the main character, you can use the aperture priority mode, and the large aperture is F2.8. If the character is moving, use TV (Shutter priority mode), the shutter speed is about 1/250s. - ** Scenery Shooting **: You can use P mode, set the aperture to about F5.6, and use a wide-angle lens. - ** Shoot flowers and plants **: Use the aperture priority mode, a large aperture lens or a 100-micro lens. The aperture must be large, and the composition can be a central composition or a nine-square composition. - ** Pet Shooting **: You can turn on the P automatic gear and shoot continuously, or use TV (Shutter priority mode) with the shutter set at 1/250s or above. - ** Shooting night scenes **: The best time is half an hour before and after sunset. Set the shooting mode to aperture priority mode, use a small aperture (F10 or smaller), set the sensitivity to 100, set the measurement mode to evaluation measurement mode (matrix measurement mode), reduce the exposure compensation appropriately, use a tripod and shoot with the shutter release (you can press the shutter directly without the shutter release). - ** Silhouette Shooting **: Use P mode, place the focus on the bright spot to measure the light, use spot measurement to measure the highlight, and increase or decrease the exposure according to actual needs. The settings of the camera for different scenes were as follows: - ** Exterior Portrait **: 1/100s, Iso100, F1.2 - 2.8. - ** In-room portrait **: 1/80s, 1500, F2.8 or below. - ** Baby/Pet Shooting **: 1/200 or above, with an IQ of 100 - 800, F1.4 - 5.6. - ** Still life/gourmet photography **: 1/80s- 1/200s, USB 100 - 400, F1.2 - 4. - ** Night Scene Shooting **: 1/30s, Iso100, F10. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
The parameters of an indoor single-lens reflex camera meeting
When shooting indoor conference scenes with a single-lens reflex camera, you can refer to the following parameters: 1. ** Shooting mode **: You can use the automatic mode to check whether the light measurement is normal, then change to manual mode; or use the aperture priority mode (Av mode) to let the camera automatically adjust the shutter speed to ensure the correct exposure. 2. ** Aperture **: Medium size, usually around 8 - 11, or set to 2.8 - 5.6. 3. ** Light sensitivity (USB)**: If the light in the meeting is good, try to lower it as much as possible. Generally, it should be between 200 - 400. It should not be too high within the allowed range. Otherwise, there may be a lot of noise when adjusting the light later. It can also be set to automatic. 4. ** Shutter Speed **: 1/125 to 1/250. 5. ** White balance **: It is determined according to the lighting of the scene. It is usually set at around 4000. Or, you can choose the indoor lighting white balance mode or use the automatic white balance mode to ensure the authenticity of the color. 6. ** Focus **: It is recommended to use the single-point focus mode and set the focus point on the main character or important object to ensure that the main character is clear and the background is blurred. If the conference scene is wide, you can choose a wide-angle lens and adjust the focal length to a smaller value to capture more details. 7. ** Flash **: If you are shooting indoors, please use flash. You can choose E/TL mode. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Photograph portrait single-lens reflex camera parameters
The following are some of the key parameters of the DSLR: ** 1. Aperture setting ** 1. ** Effect of background blurring ** - If you want to blur the background, simplify the picture, and highlight the main character, you can set a large aperture. For example, smaller aperture values such as F1.2, F1.8, or F2.8 could produce the effect of a small spot in the background. It was especially useful when shooting at night. Without changing the shutter speed, more light could be obtained, allowing the photo to be exposed normally. - However, there were also cases where a medium aperture was set, such as F8, depending on the specific shooting needs. 2. ** Aperture selection in different scenarios ** - [Exterior portrait: Aperture can be set to F1.2 - 2.8] - [In-room portrait: Aperture can be set below F2.8.] ** 2. Shutter Speed Setting ** 1. ** Safety Shutter ** - Generally speaking, the shutter speed should be set to 1/60 or above, which is the safe shutter speed. If the shutter time was too long, it was easy to cause excessive exposure and damage the quality of the photo. - When shooting people's movements, it might not be possible to use aperture priority mode. At this time, shutter priority mode (TV) could be used. The shutter speed was generally set to about 1/250s to prevent the photo from being blurred when capturing. - For the case where 35mm was equivalent to 50mm, the shutter could be set to 1/50. If the picture was too bright, it could be reduced to 1/120. If the picture was too dark, the shutter speed could be adjusted after adjusting the USB. - The shutter speed for outdoor portraits can be set to 1/100s; the shutter speed for indoor portraits can be set to 1/80s; the shutter speed for baby/pet photography must be above 1/200s; the shutter speed for still life/gourmet photography must be between 1/80s- 1/200s; and the shutter speed for night photography must be 1/30s. ** 3. Setting the sensitivity of the camera to the light ** 1. ** Adjusts according to environment ** - If it is an outdoor environment with sufficient light, the USB can be set to 100; if it is an indoor environment, it is recommended to set the USB to 400. If it exceeded 1600, there would be a lot of noise. Try to control it within 1600. If it was too low, it would reduce the sensitivity and cause the picture to be dark. - For example, when shooting a portrait, you can first adjust the USB to a minimum of USB 100. If the picture is too dark, you can increase it to USB 400 or USB 800. ** 4. Lighting Mode Setting ** 1. ** General and special circumstances ** - Generally, people would use evaluation photography when shooting a portrait. However, if the portrait was shot under backlighting or dark light, the measurement mode would need to be changed to spot photography to focus on the face or eyes of the portrait. ** 5. Selection of lens and camera mode ** 1. ** Screen Selection ** - The 50mm aperture 2.8 fixed-focus lens had a great advantage in taking portraits. Not only did it have a large aperture, but it could also achieve a very good background blurring effect. It was also stable in fixed-focus, better in imaging, and better in quality. - In terms of telephoto lenses, 3 - 4x telephoto lenses were more suitable for portraits because the wide-angle end would distort the portrait and make it unsightly, while more than 4x or even longer telephoto lenses would make the face too flat and not vivid enough. 2. ** camera mode ** - It could be used in portrait mode. In this mode, the camera could automatically select the focus point, and the image quality was also set to be more suitable for shooting people. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Setting of landscape parameters for single-lens reflex camera
When shooting scenery with a DSLR, you can refer to the following parameters: - ** Shooting Mode **: You can use P or M files. - ** Aperture setting **: Generally set to a small aperture, F-value can be set to 5.6, F11 - F13, which can ensure a larger depth of field and make the entire scenery clearer. - ** Choice of lens **: You can use a wide-angle lens with short focal length, wide angle of view, and deep field of view. It is suitable for taking photos of buildings, landscapes, and other large scenes. It can produce a strong visual impact. - ** Setting of the CPU **: If the light is good during the day, the CPU can be set to 100; if it is cloudy, the CPU can be set to 400. - ** Shutter Speed **: Generally, the shutter speed can be set to be faster. If there are special requirements (such as shooting waterfalls), the shutter speed can be slowed down. - ** Other precautions **: - Focus on avoiding being disturbed by individual protruding objects in the near and far scene. - When the brightness allowed, the aperture was reduced to obtain a larger depth of field. - Polarizing mirrors can be used to obtain better penetration (such as water or sky); gray mirrors can be used when the sun is strong, and gradual mirrors can be used when partial overexposed. - It is recommended to use a tripod to prevent blurring of the photo due to shaking. - In terms of composition, avoid placing the most attractive scenery in the middle. You can use the three-point composition, the frame composition rule, the symmetrical composition, the diagonal composition, the blank composition, and so on. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>