Is there a non-reflective car recorder?
Some car recording devices had the characteristic of not reflecting light. For example, some of the car recording devices were far away from the glass, so there was almost no reflection and they could record sounds. However, the specific products needed to be selected according to different brands and models. Read more exciting novels for free
The car recorder is too reflective at night
If the car recorder is too reflective at night, you can consider the following solutions: 1. Check whether the lens is clean. If there is dust or dirt that may aggravate the reflection, the lens should be cleaned in time. 2. Check whether the installation location of the driving recorder is reasonable. If there is a strong light reflection source in the installation location, such as near some light sources or reflective objects, try to adjust the installation location and choose a place with weak light reflection for installation. 3. Some car recording devices may have the function of adjusting the exposure compensation. If the environment is bright, the exposure compensation can be reduced to reduce the impact of reflection on the screen. 4. Confirm whether the driving recorder has anti-reflection or anti-reflection mode or setting. If there is, adjust accordingly. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
3m car reflective strip, electric car reflective sticker
3M was a brand that produced reflective strips for cars and reflective patches for electric vehicles that could reflect light at night or in low-light environments, thereby improving the visibility of objects. These reflective patches could be pasted on electric vehicles, motorcycles, cars, etc. There were many colors, among which the yellow fluorescent color was the most conspicuous in color, representing a warning function in traffic. After being pasted on bicycles or electric vehicles, it could greatly improve driving safety at night or in foggy weather. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
The speed of the car recorder is accurate
If the driving recorder had a speed measurement function, it would usually have a built-in component similar to a digital dog, including an electronic eye database and a GPS latitude and longitude database. Its working principle was to collect latitude and longitude data while the vehicle was driving, and then calculate the speed and speed warning. However, when the driving recorder had the electronic dog function, since the driving recorder and the electronic dog radar were both high-frequency electronic devices, there would be some interference when the two were placed together, resulting in interference to the flow signal reception. Usually, the best machine with an electronic dog in the driving recorder could only achieve 80% accuracy, while a good professional electronic dog could achieve 95%, so the accuracy of the driving recorder would be affected to a certain extent. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Can the car recorder detect the surroundings of the car?
If it was a single-camera driving recorder, it could only see about 100 degrees in front of the front of the car and could not detect the surroundings of the car. If it was a dual-camera driving recorder, it could see the front and back, but could not detect the side position. If it was a 360 panoramic driving recorder, it had four ultra-wide-angle cameras that could collect images around the car. It could be processed and stitched through image software to form a 360-degree panoramic view, which could detect the surroundings of the car. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
A car with reflective markings
Some vehicles had reflective markings on them. For example, the reflective logo on the rear of a van and van trailer should reflect the outline of the cargo compartment, and the reflective logo on the body should be part of the vehicle itself. Some car brands also had special reflective or luminous logo designs on specific models. For example, the new Hui-Ang launched by SAIC-Volkswagen in 2020 had relevant appearance details, including some reflective or luminous elements. The Wimmer EX5 had an iconic luminous LOGO, which could also have a striking effect similar to reflective logo at night. The logo on the front and back of the SAIC-Volkswagen ID.4X could shine, making it highly recognizable at night. These could be seen as the vehicles 'own reflective or luminous signs. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
How to deal with the reflection of the car recorder
The reflection of the car recorder was very annoying. If you want to keep an eye on the reflection of the car recorder, you can do this. First, check its installation position to see if there was anything reflecting light nearby. If there was, adjust the position or move the reflective thing away. Also, check if the lens of the recorder is dirty. If it's dirty, wipe it clean. Maybe it won't reflect light anymore. Also, he could put an anti-reflective film on the recorder lens, just like the film on a mobile phone. It might work. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
The car recorder was hit and taken photos
If the car recorder is hit, you should pay attention to the following aspects when taking photos: 1. The front and rear of the vehicle (two photos): When taking photos, pay attention to the surrounding reference objects, including various traffic signs and markings on the sides of the two cars. Focus on the signs and markings next to the wheels to facilitate the determination of the location of the accident. 2. The left and right sides of the car in the center (two photos): The relative arrangement of the two cars in the full field of vision and the relative position of the two cars on the road should be taken. It is more appropriate to make the car occupy three-quarters of the position in the picture, and pay attention to the traffic markings on both sides of the car. 3. [Details of the vehicle (at least one): If there are collision points, brake marks, debris, etc., these details need to be photographed.] The collision point should be magnified and the photo should be clear, so that the depth of the collision or the length of the scratch could be seen clearly. The location of the parking and the length of the brake marks should be clearly recorded when shooting the brake marks, which would help to analyze the driving trajectory in the accident. 4. Wheel position photo: Use chalk or brick to mark the position of the four wheels when they are parked. Then walk to the side of the car and take a photo of the position of the wheels when they are parked to avoid re-creating the scene in case of controversy. 5. Braking marks: If there are brake marks, use chalk or bricks to draw the brake marks and distance on the ground, and take a clear photo of the vehicle and the brake marks. This is very important to determine the responsibility of the accident. In addition, if the side of the car recorder was hit, whether it could be captured depended on the situation. If only the front driving recorder was installed, the side couldn't be seen, but if the panoramic recorder was installed, the side could be seen. However, when there was a collision in the parking lot, even if a panoramic recorder was installed, sometimes the car recorder would be turned off because the car was turned off. In this case, if you wanted to check the side scraping situation, it was best to check if there was a surveillance camera in the parking lot. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Car Reflective Function Introduction
The reflective function of the car was mainly realized by the reflective logo of the car body, which included reflective stripes, reflective vests, reflective labels, etc. The car reflective function has the following important functions: 1. Increase visibility: At night or in bad weather (such as smog, rain, sand, etc.), the visibility of vehicles is significantly reduced, which is easy to cause traffic accidents. Reflective signs can reflect the light of the car, making it easier for other road users to find the car and reduce the risk of accidents. 2. Enhanced safety: When a vehicle needs to stop or change lanes in an emergency, reflective signs can make it easier for other road users to detect the movement of the vehicle, reducing the risk of collision, thereby improving the safety of drivers and passengers. 3. Road marking: Reflective markings can also be used as road markings. For example, reflective stripes can be used to mark the edge of a lane or traffic signs to guide the driver in the direction of driving. 4. Make up for the lack of signal lights: The reflective function of the reflective logo on the car body can make up for the lack of signal lights. The signal light device needed to be powered when it was used. When the vehicle was parked on the roadside and the vehicle was turned off, there was no guarantee that the car behind it could find it in time. The reflective logo on the body did not need power. Even in this case, it could outline the outline of the body to indicate the existence of the vehicle, effectively preventing or reducing the occurrence of vehicle rear-end collisions or side collisions at night and other low visibility conditions. In addition, when the light is bright during the day, the reflective logo on the car body can also make the car body look clearer. Its high brightness reflected light can stimulate the driver behind the car to increase his attention. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Inkjet reflective car sticker
Ink-jet reflective car sticker was a kind of reflective car sticker. It was printed on a special reflective film with a high-precision outdoor photo machine. Reflective car sticker, also known as reflective film, was similar to flat reflective sticker. It could reflect light under strong light. It was generally used for reflective patterns and lettering. It could withstand sunlight for more than 10 years. Its inherent colors were black, yellow, blue, white, red, and green. Other colors needed to be printed with a flat reflective sticker before cutting. When applying reflective car sticker, there were different operating requirements for the hard paint base material vehicle and the car body tarpaulin base material vehicle. For example, when sticking the painted hard base material vehicle, try to avoid the screws, nuts, small holes and unpainted or easily rusted parts of the car body; The car tarpaulin base material vehicle should be pasted at a position more than 15cm above the belt buckle, try to avoid spraying, creases, holes and other parts. Before sticking, the surface of the vehicle base material needs to be cleaned. During the operation, avoid direct contact with the back glue so as not to affect the sticking effect. Do not move the vehicle or fold or open the tarpaulin (for vehicles with tarpaulin base material) within 1 hour after sticking. Also, ensure that the environmental temperature is between 13 - 39 ° C. The folding of the tarpaulin should follow the principle of folding the body outwards. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Non-reflective thin stockings
There were a variety of non-reflective thin stockings to choose from. For example, there were 0D black silk stockings, which were light and delicate in texture and smooth in hand. The upper body felt natural and transparent. They were made of Italian imported hosiery machines, so the texture was more delicate. There were also non-reflective stockings such as sunblock skincare socks, which were anti-hook and durable for women. The summer version was 0D ultra-thin black silk thin velvet stockings. Bonas Icemint stockings were 10D non-reflective, ultra-thin anti-hook and could be cut to cover blemishes. These stockings were non-reflective and thin, suitable for consumers with different needs. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>