If the car recorder is hit, you should pay attention to the following aspects when taking photos: 1. The front and rear of the vehicle (two photos): When taking photos, pay attention to the surrounding reference objects, including various traffic signs and markings on the sides of the two cars. Focus on the signs and markings next to the wheels to facilitate the determination of the location of the accident. 2. The left and right sides of the car in the center (two photos): The relative arrangement of the two cars in the full field of vision and the relative position of the two cars on the road should be taken. It is more appropriate to make the car occupy three-quarters of the position in the picture, and pay attention to the traffic markings on both sides of the car. 3. [Details of the vehicle (at least one): If there are collision points, brake marks, debris, etc., these details need to be photographed.] The collision point should be magnified and the photo should be clear, so that the depth of the collision or the length of the scratch could be seen clearly. The location of the parking and the length of the brake marks should be clearly recorded when shooting the brake marks, which would help to analyze the driving trajectory in the accident. 4. Wheel position photo: Use chalk or brick to mark the position of the four wheels when they are parked. Then walk to the side of the car and take a photo of the position of the wheels when they are parked to avoid re-creating the scene in case of controversy. 5. Braking marks: If there are brake marks, use chalk or bricks to draw the brake marks and distance on the ground, and take a clear photo of the vehicle and the brake marks. This is very important to determine the responsibility of the accident. In addition, if the side of the car recorder was hit, whether it could be captured depended on the situation. If only the front driving recorder was installed, the side couldn't be seen, but if the panoramic recorder was installed, the side could be seen. However, when there was a collision in the parking lot, even if a panoramic recorder was installed, sometimes the car recorder would be turned off because the car was turned off. In this case, if you wanted to check the side scraping situation, it was best to check if there was a surveillance camera in the parking lot. Read more exciting novels for free
No photos were taken for the two-car accident. If both parties have disputes about the responsibility of the accident, they should call the police to deal with it. The traffic management department will determine the responsibility of the accident. If there are injuries or major economic losses, or if both parties have disputes about the responsibility of the accident, they must protect the scene and report it immediately (traffic police and insurance company). It will be resolved through legal procedures, and the traffic police will determine the responsibility. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
If there was an accident behind the car and no photos were taken, if both parties had disputes about the responsibility of the accident, they should call the police to deal with it. The police could first file a case and then investigate to supplement the evidence. After all, there were many Skynet cameras everywhere that could help to reconstruct the accident. The traffic management department would make a traffic accident confirmation letter in time according to the investigation, inspection, investigation, and relevant inspection and appraisal conclusions of the traffic accident scene as evidence to deal with the traffic accident. If both parties have no objections to the responsibility of the accident, they can also contact the insurance company of the vehicle involved in the accident to discuss the compensation. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
If the driving recorder had a speed measurement function, it would usually have a built-in component similar to a digital dog, including an electronic eye database and a GPS latitude and longitude database. Its working principle was to collect latitude and longitude data while the vehicle was driving, and then calculate the speed and speed warning. However, when the driving recorder had the electronic dog function, since the driving recorder and the electronic dog radar were both high-frequency electronic devices, there would be some interference when the two were placed together, resulting in interference to the flow signal reception. Usually, the best machine with an electronic dog in the driving recorder could only achieve 80% accuracy, while a good professional electronic dog could achieve 95%, so the accuracy of the driving recorder would be affected to a certain extent. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Some car recording devices had the characteristic of not reflecting light. For example, some of the car recording devices were far away from the glass, so there was almost no reflection and they could record sounds. However, the specific products needed to be selected according to different brands and models. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
If it was a single-camera driving recorder, it could only see about 100 degrees in front of the front of the car and could not detect the surroundings of the car. If it was a dual-camera driving recorder, it could see the front and back, but could not detect the side position. If it was a 360 panoramic driving recorder, it had four ultra-wide-angle cameras that could collect images around the car. It could be processed and stitched through image software to form a 360-degree panoramic view, which could detect the surroundings of the car. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
If the car recorder is too reflective at night, you can consider the following solutions: 1. Check whether the lens is clean. If there is dust or dirt that may aggravate the reflection, the lens should be cleaned in time. 2. Check whether the installation location of the driving recorder is reasonable. If there is a strong light reflection source in the installation location, such as near some light sources or reflective objects, try to adjust the installation location and choose a place with weak light reflection for installation. 3. Some car recording devices may have the function of adjusting the exposure compensation. If the environment is bright, the exposure compensation can be reduced to reduce the impact of reflection on the screen. 4. Confirm whether the driving recorder has anti-reflection or anti-reflection mode or setting. If there is, adjust accordingly. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
The reflection of the car recorder was very annoying. If you want to keep an eye on the reflection of the car recorder, you can do this. First, check its installation position to see if there was anything reflecting light nearby. If there was, adjust the position or move the reflective thing away. Also, check if the lens of the recorder is dirty. If it's dirty, wipe it clean. Maybe it won't reflect light anymore. Also, he could put an anti-reflective film on the recorder lens, just like the film on a mobile phone. It might work. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
The following are some recommendations for dual-lens car recording devices: - Ombar 4K Dual-lens Driving Data Logger: Price: 140 USD, front camera rectangular design, 2160p resolution, 30 frames per second, 150 degrees angle of view, size about 3.7 inches wide, 1.56 inches tall, lens part slightly more than 1.5 inches thick, other parts of the body less than an inch wide, 3.18 inches color display, five buttons at the bottom for easy operation. The rear camera was cylindrical, with a resolution of 1080p, 30 frames per second, a 140-degree angle of view, a width of about 2.1 inches, and a thickness of about 1.2 inches. The front-facing daytime video captured by it was rich in detail and had appropriate color saturation. Night video would have a short graininess during the transition of low light. The rear camera's recording effect during the day was acceptable but not as good as the front camera. The ability to capture details at night was slightly insufficient. - Hikvision's driving recorder: It uses a dual-lens ultra-clear night vision design to record the driving trajectory and the surrounding situation of the vehicle. It can monitor the vehicle when parking to ensure the safety of property. - Xiaomi Smart Rearview Mirror: It has the functions of ADAS driving assistance, collision video auto-saving, loop recording, and front and rear double recording. The price is 849 yuan. - [Lingdu HS880B: It has a loop recording function, a 5x rearview field of view, and a 10-inch LCD screen. The price is 289 yuan.] - The 360 car recorder dual camera version (M301): front and rear double recording, wide angle high-definition video, and high-definition reversing video. The price was 299 yuan. - [Lingdu HS996C: It has intelligent AI voice, front and back display on the same screen, and electronic speed dog function. Price: 399 yuan.] - [Lingdu BL990: 5.0-inch screen, Android system, GPS navigation function, price 329 yuan.] - 360M320: Hidden and easy to install. It supports time-lapse recording, high-definition streaming, and reversing video. Price: 348 yuan. - Hikvision N6: Smart voice control, 3 times field of view, emergency recording, price 469 yuan. - Lingdu HS996A: 4G panoramic navigation, giant screen smart streaming media, smart navigation, price 719 yuan. - Xiaomi rearview mirror recorder: Smart voice control, front and back double recording, parking monitoring, price 349 yuan. - Lingdu AH880C: Split screen display, can clear dead spots, support time-lapse recording, price 349 yuan. - [Lingdu AH990: 4.3-inch anti-glare screen, built-in collision sensor, front and back double recording, price 219 yuan.] - [Lingdu AH998: Smart voice control, front and back display on the same screen, emergency collision recording, price 998 yuan (not available)] - U.S. 20+: Rearview mirror driving recorder, parking monitoring, low-light night vision, front and rear double recording, collision lock, loop recording function, price 499 yuan. - 360G800: Hidden car recorder, with parking monitoring, gravity sensing, electronic dog function, price 1199 yuan. - 360G580: Smart voice control, electronic dog, live voice broadcast, price 399 yuan. - [Lingdu Mini Car Recording Device: Front and rear double recording with electronic dog function, real-time evidence collection via mobile app.] - 70mHX800 driving recorder: 4K pixel-wise, the camera can be rotated, using the Sony-based imx678 hardware, STARVIS 2, and 70mHX800 self-developed algorithm MCSS3.0. The image quality is clear, the color saturation is good, and there is a surround LED light to display the status. It is equipped with a small screen for video image display and settings. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
The car recorder usually had a built-in component similar to a digital dog, which included an electronic eye database and a GPS latitude and longitude database. When the vehicle was driving, the driving recorder collected the latitude and longitude data, and then calculated the speed and speed of the collected data. The driving recorder with speed measurement function was called the electronic dog driving recorder. Its main function was to remind the driver to pay attention to the electronic eye or speed radar in advance to avoid speeding or illegal driving. The fixed electronic dog was actually a GPS latitude and latitude data instrument. Its working principle was to record the latitude and latitude data of the fixed speed camera electronic eye manually collected into the instrument, and then compare the pre-stored data with the GPS position to achieve the purpose of prompting the driver. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
If the rearview mirror could not support the driving recorder, it might be that the weight of the driving recorder exceeded the support of the rearview mirror adjustment seat. You can find a similar car to compare the support of the rearview mirror adjustment seat. If there is a difference, you should replace the rearview mirror adjustment seat. In addition, it was normal for the rearview mirror to droop when the recorder was installed because the recorder had weight when driving. To prevent this phenomenon, the rearview mirror could be tightened. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>