How to practice how to pull the ball backhand and drive the arm with the wrist
To practice the backhand pull, you can start from the following aspects: ** 1. Lead Auction Stage ** 1. ** Wrist Inward Bending Range Control ** - During the receiving phase, when pulling the backspin ball, because there was enough time to prepare, the wrist could be bent more; during the continuous pull of the middle and far platform, in order to ensure rapid restoration, the wrist should be bent less. 2. ** Slap Face Control ** - When the racquet is pulled, the racquet face is pressed lower and the wrist is bent inward. During the process of leading the racquet, it should be adjusted according to the situation of the incoming ball. For example, when the backspin ball is strong, the racquet face can be bent inward when leading the racquet, but the racquet face should be adjusted to a suitable angle when hitting the ball to avoid falling into the net. 3. ** Center of gravity and arm coordination ** - He lowered his body's center of gravity and placed it on his left foot, bending his knees. The elbow joint was pushed forward, and the forearm was retracted into the body. The racket was pulled to the left and back to the left abdomen. At this time, the wrist was bent inward, and the movement of the arm had to be coordinated with the wrist movement, so as to prepare for the subsequent wrist to drive the arm. ** 2. The swing stage ** 1. ** Wrist follows forearm movement ** - When the waist drives the arm to the front right, the forearm draws a quarter circle to the front right. The wrist should follow the force of the forearm and extend forward. After hitting the ball, the arm, forearm, and racket almost become a straight line. 2. ** Experience body coordination ** - To experience the relaxation of the forearm wrist, you can feel the force of the waist driving the arm to rotate. At the beginning of the practice, there was no need to pursue high-quality shots. First, experience the belt moving the arm, and then slowly increase the strength of the wrist and forearm. ** 3. Pay attention to key points during practice ** 1. ** Pay attention to the waist ** - The waist driving the arm was very important in the backhand pull. The wrist driving the arm was also inseparable from the waist driving effect. It was necessary to make full use of the power of the waist rotation to drive the wrist and arm movements. 2. ** Stable support of elbow joint ** - The support of the elbow joint could ensure the stability of the arm and the body, thus providing the foundation for the wrist to drive the arm's stable force. If the elbow joint was unstable, the forearm would be easily scattered during the force exertion process, affecting the stability of the overall movement. 3. ** Face angle adjustment ** - During the process of hitting the ball, don't press the racket too hard. You have to adjust it according to the situation of the ball. For example, the stronger the backspin, the more the racket face should stand and the more upward force should be exerted when it touches the ball. This helps the wrist to drive the arm to effectively hit the ball under different circumstances. 4. ** Overall body coordination ** - He had to experience the coordination of the various parts of the body to prevent his hands from dislocating from his body. For example, he couldn't just rely on his arms to swing and ignore the strength of his waist, or he couldn't rely on his arms to exert strength without moving his lower body. In addition, when starting the backspin, you must first ensure that your body and feet are in place, so that you can better lead the racket and let your wrist drive your arm to exert force. 5. ** A special feeling ** - When pulling the ball, you should feel the tension in your right abdomen. You can feel the feeling of the whole force twisting to the right front by pushing your right hip slightly forward and kicking your left foot slightly to the right front. This helps to improve the quality of the wrist driving the arm force. Read more exciting novels for free
Backhand high pull down practice back wide
The backhand high pull down was an effective movement to train the latissimus dorsi. When practicing the latissimus dorsi with a backhand high pull down, there were the following key points: - ** Grip distance **: Narrow grip can stimulate the lower back better, but pay attention to the compensation of forearm muscles; wider grip distance can stimulate latissimus dorsi and train the teres major muscles at the same time. You can choose the grip distance according to your training goal and physical condition. - ** Physical posture **: - The lower limbs had to be firmly stuck near the base of the legs. - After grasping the handle, lean back slightly with your buttocks as the pivot point. The upper body will lean back to the armpit slightly, but don't bend your spine too much. - He tightened his core throughout the training to keep his torso stable. If he couldn't feel the force from his core, he could do a core activation action at the beginning of the training. - ** Arm movements **: - In the beginning, he lowered his shoulders and slightly bent his elbows. When he exerted strength, he thought about drawing an arc with his elbow tip down to find his abdomen. At the peak, he paused and felt the feeling of his armpit tightening. Then, he drew an arc with his elbow tip back to the position where his elbow was slightly bent and felt the pulling sensation on his back. - Do not extend your elbow too far back. Draw an arc backward. - In terms of movement speed, the stimulation of the latissimus dorsi in the centrifugal stage was much greater than that in the centric stage. Therefore, the movement speed had to be slowed down. During the centrifugal stage, the weight had to be slowly released so that the back could withstand more tension. - ** Other methods to improve training effectiveness **: - He paused when he reached the peak and stretched his back before moving on to the next movement. - After completing the planned number of training sessions, he would continue to train for half or even one-eighth of the journey until he was completely exhausted. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
How to pull the backhand side spin ball
Here are some key points for pulling backhand side spin: - ** For the backspin and the ball out **: The backhand backspin is a more appropriate way to deal with the backspin and the ball out. - ** Landing point selection **: The better landing point is the opponent's backhand's baseline (big corner) and the center of the center of the center (this position is more difficult to control when receiving the ball). The chase ball is also good. - ** Movement **: - He had to be as sudden as possible and change the intensity of the rotation to prevent the opponent from adapting easily. - Pay attention to controlling your wrist the moment the ball leaves the racket to improve the stability and accuracy of the ball. - Controlling the landing point could be done by using the strength of the waist, such as facing the direction of the ball when receiving a diagonal ball. - It was not very suitable for pulling balls with strong forward momentum, because the movement of pulling the side spin was slow, and the ball was too fast for the top to cause a mistake due to insufficient friction time. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Do you need to move your arm to attack the ball with a backhand?
During the backhand attack, the arm basically did not move, mainly relying on the elbow support, through the forearm to the abdomen direction of the racket, when hitting the ball, using the strength of the waist and arm to drive the wrist forward to rub the ball. Therefore, under normal circumstances, a backhand attack did not require a large movement of the arm. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
The practice of consistent backhand in the shuttlecock
The following are some ways to practice the backhand consistent practice in the shuttlecock: ** 1. Practice the basic movements ** 1. ** Get ready for action ** - Balance of gravity: First place your center of gravity on your left foot, maintain a relaxed state, and tilt your body slightly to the left. At the same time, lower your left shoulder slightly, which is conducive to the naturalness of subsequent movements. When holding the racket, hold it with your thumb, with your palm facing up. - [Repeat: Repeat this preparation repeatedly to form muscle memory and ensure that the movements are consistent during each preparation.] 2. ** Move action ** - [Distance control: slide your right foot to the right and let your left foot take over the center of gravity. Your feet will naturally be shoulder width apart.] When moving, you must pay attention to the distance control, neither too big nor too small, and maintain your balance. He practiced this movement many times to improve the stability and unity of his movements. 3. ** Aim and hit the ball ** - Aim practice: Look at the ball, swing your right arm back, and cross the ball according to the backhand path. During practice, you must pay attention to the continuity and accuracy of this action. Every aiming action should be the same as possible. - Clutch continuity: When hitting the ball, swing your right hand upward according to the backhand path, and swing your left arm forward at the same time. The whole movement must be smooth and natural. You can practice in front of a mirror or ask a coach or a partner to observe and correct it to ensure that your hitting movements are consistent. ** 2. Strength and Control Practice ** 1. ** Strength training ** - "Assist training: Do more backhand strength support training, such as wrist and arm strength exercises. In the process of strength training, you should pay attention to the way you exert force. For example, the force of the backhand stroke is like the internal rotation of the faucet (clockwise). This method of exerting force must be mastered and maintained in order to improve the stability of the backhand stroke. - Power adjustment: When hitting the ball, you must learn to control the strength of the backhand so that the ball can accurately fall on the corresponding landing point. You can practice by setting different landing targets and gradually master the consistent control of strength in different situations. 2. ** Ball Control ** - Racquet face control: When hitting the ball, pay attention to raising the racket face, and according to the different ball paths (such as straight line, diagonal, pick, hook, release, etc.), on the basis of maintaining the consistent movement, make fine adjustments to the racket face angle. For example, in the case of a backhand chop or a backhand chop, if the basic movements were similar, adjust the side cut or side wrap cut according to the different ball paths. - Instant strength application: Master the technique of instant strength when hitting the ball. In different backhand hitting techniques (such as backhand high ball, backhand kill ball, etc.), you must exert strength in the same way at the moment of hitting the ball, so that the ball can fly further and maintain the ability to control the ball. ** 3. Combat and sparring ** 1. ** Practicing with different opponents ** - Practice with people: practice with opponents of different levels and styles. In actual combat, in the face of different situations (such as different speeds, heights, angles, etc.), the use of backhand techniques, through continuous experience, to improve the unity of backhand movements in various situations. 2. ** Combat simulation training ** - [Create Scenes: Simulate various scenes in the game, such as backhand shots under pressure, backhand returns under passive circumstances, etc.] In these simulated scenes, the backhand movements were more consistent, so that the backhand technique could be more stable in the actual game. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Backhand bare-handed practice
When practicing the backhand bare-handed swing, both hands should move at the same time and spread out from the chest. At the beginning of the practice, you can take off the board first. As the practice goes deeper and the center of gravity is involved, the structure of the action may change, but the mechanism remains the same. There must be a hitting action and a reduction action (that is, there is a back and forth like a forearm swing). For the backhand bare-handed swing that was closer to actual combat, stand parallel with your feet slightly wider than shoulder width, bend your legs slightly, and lean your center of gravity forward. When you swing, you will experience the opposite shift of center of gravity as compared to the forehand. At the same time, pay attention to the cooperation between the clapping hand and the non-clapping hand. The two hands must work at the same time. The non-clapping hand also plays an important role in the practice. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Billiard Teaching Backhand Practice
The following are some of the key points for practicing backhand billiards: ** 1. Postures and Stance ** 1. ** Distance between body and table ** - It was important to maintain the distance between the body and the table when doing backhand strokes. For example, when pulling the ball with a backhand, the distance between the body and the table should be about 30 - 40 cm. This way, it was not easy to be blocked by the ball when dealing with the billiard ball. 2. ** Position ** - When serving a backhand side backspin serve (long ball or no ball), the body position is different. When serving a long ball, the body should be about 30 to 40 centimeters away from the table. When touching the ball, the body can retreat slightly. When serving a ball that cannot be served, the overall strength should be lighter. ** 2. Method of exerting force ** 1. ** Waist and abdomen strength ** - It was similar to the waist and abdomen force in the backhand ball pulling action. When the racquet was pulled, the abdomen was sucked in, such as twisting the hip and sucking in the abdomen (twisting the hip was twisting inward, different from simply turning the waist). At the same time, the center of gravity of the body was pressed down. In the process of hitting the ball, he had to quickly twist the strength of his waist and abdomen to the right, and he had to cooperate with the strength of his arm. Pay attention to not just using your abdomen to exert force, but to coordinate with the entire movement process. 2. ** Arm Strength ** - With the elbow joint as the pivot, the forearm exerted force to the front right and rotated about a quarter of a circle. The arm had to be relaxed during the process of exerting force. It was like swinging a whip to the right, but the entire frame of the movement had to be tight. The key was the stable support of the elbow joint. This would ensure the stability of the arm and assist the forearm in exerting force. ** 3. Hit the ball ** 1. ** Backhand backspin serve ** - The action was similar to the side spin serve, but the surface of the racket was flatter when it touched the ball. The lower right side of the ball was rubbed near the bottom to create a backspin. The difference between a backhand backspin serve and a backhand backspin serve was that the backhand backspin serve used more force to the right, and the racket face was not completely level but slightly steep. This way, it could rub the right side of the ball and produce a right-hand spin. When serving, the elbow joint should be high, and the direction of the movement should be downward to rub the ball. - There is a difference between serving a long ball and not playing billiards. When serving a long ball, stand 30 - 40 cm away from the table. When you touch the ball, move back slightly and serve the ball to the end line of our table. The force of cutting the ball down and forward is more obvious. If you can't serve the ball, you should use less force. The force should be reduced to the right side. Just shake your wrist and don't use too much force forward. 2. ** Wrist turn ** - No matter which way the backhand was used, the rotation of the wrist was very important. The trajectory of the swing was a semicircle trajectory that rotated with the wrist as the axis, like a windshield wiper. When hitting the ball, you can use the strength of your wrist to adjust the plate shape. First, press the plate shape and then open it when you turn it. After opening it, you can press it again. This way, you can better exert force and control the ball. At the same time, to experience the feeling of the wrist fingers alone, you can only rotate the wrist fingers and the movement of the bottom plate to the maximum extent to experience it. At the moment of contact with the ball, you can quickly do this action to experience the feeling of the fingers brushing. If he simply used his forearm to move his wrist, the acceleration of his wrist might not be fast enough. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Is there a big difference between a forehand pull up and a backhand pull up
There was a big difference between a forehand pull-up and a backhand pull-up. In terms of muscle exertion, the backhand pull mainly relied on the arm to exert force, especially the biceps, while the forearm pull mainly relied on the back muscles to exert force. This led to the fact that for ordinary people, they usually used their arms more and their back muscles less, so they lacked exercise. Therefore, it was relatively more difficult for them to pull up with their forehands. From the perspective of the training effect, the forearm pull up mainly trained the back muscles, such as the latissimus dorsi and the lower part of the oblique muscles. It was the trump card of training the back and was very helpful in building an inverted triangle body. Compared with the backhand pull up, the latissimus dorsi was more activated and the biceps were less activated. The backhand pull up focused on training the biceps of the arm and also involved the inner side of the pectorals major and latissimus dorsi. In terms of the difficulty of the movement, for beginners with weak strength, the forearm pull up, which was dominated by the back muscles and less assisted by the biceps, was more difficult to master. The backhand pull up would greatly mobilize the biceps to assist the back muscles to pull up the body, thus reducing the difficulty of the movement to a certain extent. In terms of movement characteristics, the requirements for the flexibility of the joints were relatively low. Most people could practice without stretching or warm-up activities. However, the movement stroke of the forehand pull was smaller than that of the backhand pull, and the leverage advantage was smaller. The flexibility of the shoulder joint was higher, and it was more difficult to feel the back contraction. The backhand pull required a large bending, external rotation of the shoulder joint, and internal rotation of the forearm. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Teaching and Training of Backhand Pull in Table Tennis
The following is the teaching and training method of table tennis backhand pull: ** 1. Hold the racket ** He used a backhand shallow grip, holding the racket against his index finger and leaning the thumb. This way of holding the racket was good for adjusting the racket face, which not only ensured better control of the arc when pulling the ball, but also made the whole force more smooth. However, you should pay attention to avoid holding the racket too much to the backhand. Otherwise, it may affect the rapid conversion of the movement when switching to the forehand. ** Two, backhand topspin ** 1. ** Prepare the posture ** Standing on the left half of the table, you can step back slightly at the beginning of the practice, about 80 centimeters to 1 meter away from the table, and at the same time, keep a heavy heart. 2. ** Lead Auction ** The head of the racquet was placed on the left hip instead of the hand extending to the left. There was no need to turn the waist like the forehand, only the left hip was retracted and the right shoulder was slightly forward. The center of gravity of the two feet should be on the front foot. His wrist was bent inwards, but not excessively. 3. ** Hit the ball ** He pushed his left knee forward while stretching his abdomen. However, he did not need to stand straight. He just needed to push forward slightly. Then, he accelerated his forearm and spread it to the front right. He hit the ball at the later stage of the ball's rise and touched the upper left part of the ball. The moment he touched the ball, his thumb and index finger grabbed the ball board tightly. His thumb could add a feeling of pushing forward and down. After hitting the ball, when the head of the racket was pointed at the diagonal angle, it instantly stopped and returned to the preparation position. ** 3. Backhand backspin ** 1. ** Lead Auction ** The lead should be slightly lower than the topspin ball and placed in front of the inside of the left thigh. 2. ** Hit the ball ** When you touch the ball, you can touch the left side of the middle or the left side of the middle and lower part. When you touch the ball, you have an upward "up" force, and then press the arc. The forward drive loop had more force and more impact, while the spin loop had more friction and stayed on the board for a longer time. ** 4. Training Method ** 1. ** Experience the feeling of rubbing upwards (transition from backhand to backhand)** When learning the backhand continuous fast pull, you can transition from the backhand kick. If the ball comes with a bit of backspin, it will fall into the net with the poaching action. At this time, the students were required to slightly lower the racquet to the bottom of the table, and then use their arms to exert force upwards. Although they might not feel the strength of twisting the waist, they could understand the feeling of creating friction upwards to turn the downspin into a topspin. 2. ** Experience the feeling of the center of gravity rubbing your arms upwards ** In front of him was a short wooden chair with a rebound board. He let go of the ball and let it bounce freely before pulling it up onto the stage. Because the backhand pull rubbed against the ball during the fall (early or late fall), the ball had to be pulled up when it felt like the ball was falling low. You can prepare more than one bowl of balls to practice. When you pull the ball, the ball will bounce down and the center of gravity will be lowered. Your arms will exert force upward to experience the feeling of your body's center of gravity driving the upward swing. 3. ** Intensified Training ** - ** Multi-ball and single-ball training ** After experiencing the feeling of rubbing the ball upward through the previous two methods, he first increased the stability of the swing through multi-ball training during the continuous backhand pull, and then continued the single-ball continuous pull training. - ** Correct use of waist and hip ** When practicing multiple balls, you have to experience the change of center of gravity. When pulling the ball with a backhand, the center of gravity should always be tilted forward. You can't push your stomach forward and put your center of gravity behind your buttocks. When continuously pulling, one had to use the strength of the waist (abdomen, abdomen), similar to the feeling of twisting a towel. He had to use the non-holding hand to assist him in twisting forward. He had to experience the force exerted on his right abdomen. The entire force exerted felt like boxing, but it was not the force exerted from the front and back. Instead, it had the force of twisting and pushing forward. He could also assist in pushing forward with his right hip and knee to gradually make the force exerted more coordinated. 4. ** The correct use of the wrist ** When you catch the ball and turn it, your wrist should be tight. Your forearm should send the ball out to extend the arc. Don't shake your wrist. You should have the feeling of catching the ball. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Backhand Tear is a loop ball
The backhand loop had the characteristics of strong rotation, fast speed, and low arc. It was a better defensive counterattack technique, also known as the backhand loop. Its threat was greater than the backhand block loop, but it was less difficult than the backhand pull loop. It was widely used by professional athletes. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Wrist blade and arm blade and fist blade
Wrist blades, arm blades, and fist blades were all cold weapons. The wrist blade was usually closely related to the Predator. It was made of high-strength alloy and was like a part of the Predator's body. Even if other weapons and equipment were lost, the wrist blade would accompany the Predator to the end of the battle. With the terrifying body strength of the Predator, the wrist blade could easily cut through enemies in close combat. Arm blades appeared in games or Xianxia works, such as the arm blade on Chong Lou's arm in the Legend of the Sword and Fairy 3. It was a weapon of the demon world and was comparable to demon weapons such as the demon sword. The fist blade was usually fixed to the wrist and could be held single-handedly or double-handedly. This kind of weapon had existed since ancient times, and now it appeared more in games and anime works. It was different from the hidden blade. The hidden blade was like a flick knife, while the fist blade was fixed on the wrist or held in the hand. Its length was less than one meter. If it was too long, it would not be able to display the fast, accurate, ruthless, and strange effects. "Let go and become a Buddha, draw your saber!" The novel is equally exciting. Everyone is welcome to click and read it!