Shooting video tutorial
There were many key points that one needed to master in shooting: ##1. Initial preparations 1. * * Gun adjustment ** - Set the gas regulator, sight hole, and speed regulator of the gun to the "1" position. Pay special attention to the adjustment of the sight hole, because the "1, 3, and 5" on the sight hole represent the sight hole used for shooting distance of 100 meters, 300 meters, and 500 meters respectively. If the adjustment is wrong, it will affect the relative position of the crosshair and the sight hole. 2. * * Reloading process ** - After loading the full magazine, the trigger had to be pulled quickly to avoid a jam. If there is a jam, don't panic. Remove the magazine and slowly pull the trigger to remove the bullet. 3. * * Gun Inspection ** - Before shooting, check the gun first to eliminate the residual hidden dangers of the bullet. ##2. Shooting Postures and Movements 1. * * Aim ** - Grasping the relationship between the crosshair, the gap, and the target, the relationship between the crosshair and the gap was particularly important. The archer used his single eye to look through the crosshair and positioned the crosshair at the center of the gap. Due to the reflection of light, the aiming line was actually composed of three layers of thinner lines. One had to aim through the solid line in the middle. If one aimed through the dotted line, the impact point would be lower than the actual aiming point. If the black part was used as the aiming line, the impact point would be higher than the actual aiming point. - For a bullseye that was 100 meters away, if one aimed at the center of the 10th ring, the actual bullet would hit almost the position of the lower 9th ring. Therefore, when the shooter aimed at the 10th ring bullseye, the flat line of the crosshair gap must be two-thirds or one-half of the bullseye. This way, the actual point of impact would be the bullseye. 2. * * Breathing and firing ** - When shooting, you must relax and calm your emotions. You must avoid being overly nervous or completely relaxed. Breathing should be steady. During the aiming process, pay attention to the feeling of "intentional shooting and unintentional firing". After aiming well, slowly pull the trigger with your fingers to avoid sudden force that will cause the muzzle to shake. 3. * * To prevent the wrong target ** - Before shooting, one must adjust the posture of the gun and then look at the target position clearly. It was best to try to aim with an empty gun first. In a scene where many people were shooting at the same time, one had to concentrate and not be disturbed by the surrounding gunshots to ensure that they shot at their own target. ##3. Points to note during shooting 1. * * Body posture ** - During the entire shooting process, you must pay attention to not standing up and not letting the gun leave the support. Your body should be on the side of the gun, and the muzzle should not be facing the person. 2. * * Mental quality ** - If the impact points are scattered all over the target (such as the Goddess Scattering Flowers type), it may be that the aiming essentials are not mastered. If the impact points are very different (such as the bull type), this is a problem of psychological quality. You must adjust your mentality and prepare to shoot according to the process. First, adjust the gun holding posture, see the target position clearly, and try to aim with an empty gun. While watching the Olympics, you can also read the wonderful novels related to the Olympics!
Mooncake shooting tutorial, photography video tutorial
Here are some mooncake shooting guides: 1. ** Shooting with professional equipment ** - ** Equipment preparation **: Canon 6D2 camera, 100mm lens, Shiniu Flash 600 second-generation light, etc. - ** Lighting ** - [Main light: Use a Divine Bull Flash 600 second generation. The accessories are standard covers. Light the background at the two o'clock direction on the back right side. To create a window effect, a window pane can be added in front of the light.] - "Assist light: Use another Shiniu Flash 600 second generation, and choose a long soft light box as the accessory. Light the main mooncake on the front right side. Pay attention to the position of the lamp head not to lean towards the background to avoid affecting the background light effect. - "Light fill: Use a large foam board to fill the light on the left side. If the shooting time is during the day and the fill light effect is not good, you can add natural light to make the light ratio more uniform. - ** Concept of composition **: For example, use the door as the background, place the main body on the table, arrange the props according to the rhythm of height, and use a flat angle to reflect the daily feeling. - ** camera parameters **: Aperture set to 5.6, shutter speed 1/160 seconds, USB 100, main light output 1/8, auxiliary light output 1/32. - [Post-production plan: adjust the white balance, increase the brightness of the shadows, increase the clarity and contrast, sharpen the outline of the props and the main body, and reduce the saturation of the blue primary color to reflect the dark atmosphere.] 2. ** Phone Shooting ** - ** Creating a sense of atmosphere **: Place the mooncake on a white plate, turn on the phone's 2x focal length (to prevent the plate from distorting), use some green plants as the background, and focus on the mooncake on the three-point line under the nine-square grid. - [Increase layering]: Take a book and place it under the plate. Use the top-down angle to center the composition. You can also place some cutlery on the side to form a parallel diagonal line. - ** Framed composition **: Break some mooncakes apart, take a cup, and use the cup handle to form a framed composition. The combination of virtual and real will create a sense of atmosphere. - Other techniques: Find a well-lit window, take two white rags, and pose the mooncake. Use the desk calendar as a prop to magnify it twice and make a diagonal composition. You can take a cup of tea as the background, click the portrait mode, adjust the aperture value to F2, and focus on the mooncake to create a sense of reality. You can also cut the mooncakes and stack them up and down. Find a magazine as the background, place the mooncake in a good position, magnify it three times and place the mooncake on the right three-point line. 3. ** Shooting in different styles ** - ** Simple Shooting ** - [Props: Various colors of cardboard. Melon seeds, walnuts, peanuts, and other common mooncake ingredients or grains may be used.] - ** Light **: Two lights to create a shadowless effect, shooting in the light. - ** Cameras and composition **: Aerial shot (God's perspective), using the golden ratio composition. - ** Chinese Style Shooting ** - Setting up the scene: Find a Chinese window pane and all kinds of old boards to set up the front and back. Find a Chinese vase that is similar to the color of the cheongsam and insert golden osmanthus. When the back is in space, you can hang calligraphy practice paper, pen rack, cast iron pot, etc. on the background cloth. Or use two boxes of mooncakes, a small porcelain plate, oil painting background paper, and a small table as props. You can also use two boards and a few old wooden trays. Add the four treasures of the study and tea set to create a Chinese atmosphere full of books. - ** Light distribution **: It can be used as a single bare light + standard cover, backlit on the right, and filled with light on the front left side. - ** Shooting method **: You can take a test shot, the photographer can take a selfie (such as a 10-second selfie after changing into a cheongsam after the scene is set up), take a close-up of the mooncake, etc. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Video tutorial on photography baseball shooting skills
" Video Guide to Shooting Techniques in Basketball." This should be a video tutorial about shooting techniques in baseball. It can teach you a lot of related shooting techniques. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Shooting songs, slow down, tutorial, video encyclopedia
Here are some tools and operations that can be used to create a slow-motion tutorial video: ** 1. Tune the audio speed (for songs)** 1. ** Rainbow Office Center ** - Plug-in mode, clean interface. First, he selected the "audio processing" function, then he clicked on "variable speed audio." He clicked [Add Files] in the middle to import the music file. The user could set the speed between 0.5x and 2.0x, and then click Start to change the speed of the song. 2. **GoldWave** - This was an audio editing software. First, he clicked on the [Files]-[Open] option in the menu bar, found the song file he wanted to edit, and opened it. Then, he clicked on [Effects]-[Time Warp] in the menu bar. In the dialog box, he selected different time warping algorithms (such as fast and slow) and adjusted the playback speed. Finally, he clicked on the [OK] button and saved the set audio through [Files]-[Save As]. 3. **AudioTrimmer** - After entering their website, upload the song audio file (you can edit it when uploading, but you can only export it after the upload is complete). When you see the sound wave diagram and the green arrow positioning points on both sides of the diagram, you can drag to select the music preservation area. The orange part in the middle is the preserved sound effect, and the unmarked color part is the trimmed range. At the same time, you can drag it to automatically play the playback. You can click any section of the wave diagram to start playing from there. It also provides the sound fade effect. Choose the output audio format (such as mp3 or m4r), and click the trim to get a new audio file. 4. ** Fast audio processor ** - First, download and open it. In the function list on the left, click the [audio speed change] function, click the blue button "Add file"(you can drag the file directly to the software interface) to upload the song file, and on the right, set the playback speed by dragging the progress bar (drag it to the left to slow down). Finally, click the red button "Start Conversion". After the operation is completed, you can find the slowed down song in the automatically opened output folder. 5. ** Xunmi audio master (online tool)** - He opened the official website with a browser, found the "audio speed change" function, entered the operation page, and clicked on "add file" to upload the song file. After seeing the playback speed setting bar in the file list, you can adjust the playback speed by dragging the slide bar or selecting a multiple (dragging it to the left to slow down). You can also set the output folder at the bottom. After setting it, click the "Start Processing" button. After the operation is successful, you will enter the download page, click download, and set the save address and name. ** 2. Video production related (integrate the slowed down song into the tutorial video)** 1. ** Video player (such as VLV media player)** - If you want to create a video tutorial that includes a slow down song, you can open the video material in the VLV media player first. From the menu bar, he chose "Tools", then "Effects" from the drop-down menu. He clicked on the "Video Effects" tab, then chose the desired video speed from the "Speed adjustment" drop-down menu, and clicked "Save". Then, he would combine the adjusted video speed with the slowed down song in the video editing software to create a tutorial video. When creating a tutorial video, you also need to consider video recording software (such as OBG Studio) to record the screen operation or record your own explanation of the slow down song operation. In addition, you need to use video editing software (such as Adobe Premiere Pro, Final Cut Pro, etc.) to combine the recorded images, the slowed down song audio, and the corresponding subtitles. Add the necessary annotations and explanations, and finally form the slow down tutorial video. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Starry sky shooting tutorial
The following is a starry sky shooting tutorial: ** 1. Initial preparations ** 1. ** Shooting location **: Choose a place with less light pollution, such as the suburbs, plateau, desert, seaside, etc. If it is in the mountains, there is no need to consider the light pollution problem. 2. ** Shooting time ** - ** Season **: In the northern hemisphere, you can see the Milky Way's silver heart in summer, and you can see the Milky Way's spiral arm in winter. As long as the weather is good, you can take pictures of the Milky Way every season. - ** Moon Phase **: The sky is the darkest at the new moon, suitable for shooting the Milky Way clearly. The sky is also darker when the moon rises and sets. You can shoot it. You need to plan the time before shooting. - ** Months of the year **: April to September of the lunar calendar is the best month to take pictures of the starry sky. In a month, it is easier to take pictures of the starry sky from the 20th to the 30th and the 10th day of the lunar calendar. 3. ** Equipment preparation ** - ** Cameras (If you use a camera to shoot)** - Choosing a camera with the same quality and lower noise would make the picture clearer. - The lens could be a wide-angle lens or even an ultra-wide lens, which could capture a wider galaxy. A large aperture could increase the amount of light entering. Generally, a lens with a focal length of less than 24mm was chosen to allow more galaxies to enter the painting. If the focal length of the lens was not enough, it could be used for panoramic shooting and post-stitching. - "Control of the lens: Turn off anti-shake, turn off autofocus, use manual focus, and open the maximum aperture. - The camera settings: - ** USB **: Try to use a high USB without affecting the acceptable quality of the video. The general range is 1600 - 3200. - ** Shutter Speed **: 600 divided by the focal length of the lens is the fastest shutter speed (e.g. 600/24mm = 25s). The longest exposure time of a full-frame camera to avoid star trails is based on this. Increasing the focal length should reduce the exposure time. - ** Aperture setting **: Use the lens 'maximum aperture with the minimum focal length to allow sufficient light to enter the sensor, such as F/4 or better if the lens' maximum aperture is F/2.8. If the exposure exceeds 30 seconds, most cameras need to use the B door to call the shutter. At this time, the shutter release is needed to control the camera. - ** Phone (If you use a phone to shoot)** - Most Android phones could shoot stars as long as they had a camera with a professional mode and the shutter speed could be adjusted to more than 15 seconds, and the USB could be adjusted to more than 3200, such as Huawei, Vivo, Oppo, Xiaomi, Samsung, OnePlus, Meizu, etc. At present, only the iPhone 11 and iPhone 12 series could take pictures of the starry sky (with the built-in camera night view mode, the quality could be improved). - A tripod was needed to stabilize the phone to ensure that the phone did not shake when shooting. ** 2. Filming process ** 1. ** Cameras ** - After adjusting the parameters according to the above camera settings, he began to shoot. 2. ** Phone Shooting ** - [Android phone: Enter professional mode, adjust the sensitivity to about 3200, shutter speed to about 15 - 25 seconds, manually focus to the farthest, you can take a test shot first, if it's too exposed, adjust the shutter speed, if it's not exposed, adjust the shutter speed, and the USB can be fixed at 3200.] - Apple's iPhone 11/12 series: Mount a tripod and adjust the exposure time to 30 seconds in night mode. In addition, if you want to enhance the performance of the constellation, you can use NiSi's new star soft focus filter. The brighter the star, the more obvious the amplification effect.
Shooting a blockbuster photography tutorial
The following are some of the main points of a photography tutorial for shooting a blockbuster: ** 1. Exposure-related ** 1. ** Aperture ** - The aperture was like a door to the lens. The smaller the aperture value (F value), the larger the aperture, the more light would enter. The depth of the field would be shallow, and the background would be easy to blur. It was suitable to highlight the main body. For example, when shooting portraits, it could create the effect of clear main body and blurred background. The larger the F value, the smaller the aperture, the less light would enter. The depth of the field would be deep, and the background would be clear. It was suitable for shooting scenes that required overall clarity, such as landscapes. 2. ** Shutter Speed ** - It can be adjusted in TV shutter priority mode or M manual exposure mode. The shutter speed was fast (large), and the photo was dark. It could freeze the moment, suitable for shooting pedestrians, athletes, water droplets, birds, and other dynamic objects. The shutter speed was slow (small), and the photo was bright. It could record the trajectory, such as shooting waterfalls, traffic, light painting, stars, fireworks, star tracks, and other scenes. 3. ** Light sensitivity (USB)** - The higher the value, the more sensitive the photo would be to light. The photo would be brighter, but the quality would decrease and the noise would increase. Generally, when the light is strong outdoors during the day, the USB should be set at around 100, indoors at around 400, and at night between 3200 - 6400. It is recommended not to exceed 6400. ** 2. Setting the exposure mode ** 1. ** Fully Automatic Transmission (Automatic)** - The shutter speed and aperture were automatically calculated by the camera. The photographer could not change it during the shooting process. After determining the shooting elements, he could press the shutter. 2. ** Program auto exposure mode (P)** - The camera would automatically calculate the shutter speed and aperture combination, and the photographer could make some changes to the parameters. 3. ** Shutter priority mode (S or TV)** - Keeping the shutter speed unchanged, the camera would automatically calculate the appropriate aperture size. 4. ** Aperture priority mode (A or LV)** - He kept the aperture size unchanged and calculated the appropriate shutter speed. For example, it was suitable for shooting portraits with a large aperture. 5. ** Full Manual Gear (M)** - The shutter speed and aperture were set by the photographer himself, and the photographer was required to be familiar with the shutter speed and aperture combination. ** 3. Focus Method ** 1. ** Manual Focus (MV)** - It was a more accurate focusing method when the shooting distance was close. For example, it could be used to avoid out-of-focus when shooting videos. 2. ** Automatic Focus ** - ** AF-S (Single autofocus)**: Can be used to pose for portraits, still life, and architectural shots. After half pressing the shutter and hearing the sound of successful focusing, the shutter can be fully pressed. - ** AF-C (Continuous Focus)**: Used for moving objects, capturing people and animals. When shooting, press the shutter halfway to continue focusing until the shooting is completed. - ** AF-A (Smart autofocus)**: The camera automatically determines whether it is focused on a single shot or a continuous shot based on the subject, but it is easy to make mistakes and cause out of focus. ** 4. White Balance ** 1. It can correct the color temperature and restore the color of the subject, so that the color of the picture shot under different light sources is close to the human eye. 2. By controlling the color temperature, the overall color atmosphere could be adjusted. Increasing the color temperature K value could make the photo appear warm, and lowering it would make it appear cold. ** 5. Method of composition ** 1. ** Third-division Method ** - Divide the picture into nine parts evenly according to the shape of a "Jing", and place the subject on four overlapping points or lines. 2. ** Centrosymmetrical Method ** - Place the subject in the center of the picture so that the left and right sides are symmetrical. It can highlight the main body, but the picture may be dull. You need to carefully arrange props to make the picture rich. 3. ** Triangle composition ** - The shooting subject formed a triangular picture, such as an equinox, an oblique triangle, or an inverted triangle. It had stability and balance. It had to be matched with good props to pull apart the primary and secondary relationship. 4. ** Diagonal composition ** - The subject was positioned diagonally across the screen, giving it a strong sense of direction, making the screen full of tension, lines, and impact. 5. ** Leave blank ** - Reduce the proportion of the main character in the picture, make the picture cleaner, highlight the main character, and increase the sense of the story. 6. ** Foreground composition ** - During the shooting, an object was placed in front of the camera to produce a blurring effect, enhancing the three-dimensional sense, impact, and layering of the picture. ** 6. Choice of focal length ** 1. ** Wide-angle ** - It was suitable for landscape photography of large scenes. The shorter the focal length, the wider the lens, and the wider the field of view. The normal wide-angle lens was 24mm-35mm, and the ultra-wide-angle lens was 12mm-24mm. 2. ** Standard ** - It was suitable for shooting portraits and still objects. The focal length of 50mm was the closest to the human eye, and it was easy to achieve a large aperture. It was advantageous to shoot in dark light, which was conducive to creating a blurring effect. 3. ** Middle Jiao ** - The focal length of 85mm-135mm was suitable for shooting people and scenery. The photo had little distortion and could accurately reflect the shape of the subject. 4. ** Telephoto ** - It was suitable for shooting long-distance objects. It was a telephoto lens over 135mm and a super-telephoto lens over 500mm. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Diving video tutorial
The following are some video tutorial contents related to diving: 1. [Character Ground Diving Guide: First shoot the character to the water and then jump, then shoot an empty scene.] He imported two videos and chose to freeze the character in the air, deleting the rest. The frozen image switched to the picture-in-picture, and he chose to customize the image and paint the character. He keyed in a frame at the beginning of the PiP and moved it back by 0.2 seconds to move the character below the water surface. He copied an empty scene and switched it to PiP. Then, he chose the line in the mask and moved it to the water surface. Then, he chose PiP to add the splash material. He chose the color filter in the blend mode and adjusted the position. 2. * * Swimming and Diving Course **: - [Basic techniques: When the body is tilted at 45 degrees, jump up with both legs, overlap your hands to minimize resistance, pay attention to lowering your head, and straighten your legs when you jump.] - Nose soreness prevention technique: pinch the nose with one hand. When diving from a high platform, the tip of the finger was the first to enter the water. Try to make the tip of the nose enter the water at a position slightly behind the palm. Try to enter the water with the arm a few times to find the right distance from the head. - Steps to practice the jumping technique: - First, you should be clear about your body's condition when you jump and the way you exert force when you jump (your legs are the main force point and need the traction of your upper limbs and torso. Your body must have a parabola). You can start from the lowest height by the pool. You should clamp your arms and aim at the water to ensure that your hands enter the water first. - Raise your height a little higher and practice. Then, take advantage of the situation and fall down. Pay attention to the water surface. - Raise a little higher and jump from the side of the pool in a standing position. Bending your knees slightly, kick your legs when you are halfway down (don't use too much force), and tighten your arms. - Training the feeling of jumping: You need a partner and a stick-like auxiliary tool (such as a bamboo pole or a buoyancy bar) to train from near to far to get the feeling of jumping. - After a series of practice by the side of the pool, he stood on the take-off platform to practice, starting from the body falling down to the increase of obstacles and jumping hard. Pay attention to the toes of the take-off platform. - Finally, he performed a regular jump shot. He grabbed the platform with both hands, and his body could sit back slightly to increase the tension before shooting out like an arrow. While watching the Olympics, you can also read the wonderful novels related to the Olympics!
Diving tutorial video
" Introduction to Diving Video Teaching " was a video teaching you how to get started with diving. Starting from the basic movements, he would gradually guide you into the field of diving, so that those who wanted to learn diving could get started quickly. While watching the Olympics, you can also read the wonderful novels related to the Olympics!
Skating video tutorial
Here are some video guides on ice skating: 1. [Safe Stance: If you are worried about getting a bruise on your first ice skating trip, you can learn the safe fall posture to protect yourself from injury.] 2. [Standing Skating: People who pass by the ice skating rink but dare not try can learn how to stand and move on the ice.] 3. ** Turning Skills **: With the influence of the Winter Olympics, skating has become a popular sport. You can learn turning skills through the advice of professionals. 4. [Backsliding Technique: Master the backsliding technique. At the same time, you can learn how to maintain the skating equipment when the skates are wet and worried about rusting.] In addition, you can also learn how to ice-skate through some simple steps, such as standing on the ice and wearing shoes to experience the method of standing flat and firm. Put your hands and feet straight, stand firmly, and then step (raise your feet, one, two, one, step on the spot). After mastering it, slightly stretch your feet out a little bit (feet wider than shoulders), and continue to step on the spot (don't step forward). When you step, be careful not to stretch your legs too far to avoid splitting. Use the ice blade to slide forward to drive your body. While watching the Olympics, you can also read the wonderful novels related to the Olympics!
Guitar tutorial video
Here are some guitar tutorial videos: - There was a tutorial video that provided the introductory zero foundation course of the "Easy Guitar Introduction 20 Classes" synchronized textbook (first 1 - 10 lessons). It included the teaching of right-hand fingering, introduction to six-line music, left-hand coordination, guitar C scale, note rhythm, guitar chords, chord conversion, and introduction to sweeping the strings. You could click on the title of each lesson to watch the corresponding video. - There was also a guitar tutorial video about Last Dance, but viewers who wanted to comment and get more features (such as downloading a member's exclusive accompaniment, etc.) might need to log in to their account. Some users also suggested improvements to the tutorial video, such as adding audio with only drum accompaniment, fixing problems where the score could not be seen, and making the bass and drums a separate audio. - There were also guitar tutorial videos on TikTok, such as the video titled "#Guitar#Wooden Guitar #Zero-Basics Guitar #Guitartutorial Video." However, the content of the video was rather peculiar and did not clearly present the systematic teaching content. There was also a video titled "Guitar Singing Guitar Basics Video #Guitar Basics #Adult Guitar Basics #TikTok Guitar Basics #Guitar Self-Study Basics #Guitar Teaching Video". "The Reborn Daughter General Star" is the original novel of the TV series "The Moon Is Like Song." Everyone can click on the link below to read the original novel. The original novel is equally exciting.
Hairdresser tutorial video
Here are some tips for hairstylists: - Scratching and Scissoring Method: - It was suitable for cutting layers, such as inverted wavy hair. To do this, comb all the hair high up to the top of the head and hold it tightly with your hands. However, this method of cutting hair would not be too long and would reduce the amount of hair, making the hair long and thin. It may not be suitable for people with thin hair. After that, he trimmed it according to his heart. He could pinch out a strand of hair at the hairline on his forehead to determine the position of the shortest hair layer, then return it to its original position, and then trim it from there. After that, he let go of his hair and combed it. Then, he grabbed the hair in the opposite direction and trimmed the scattered parts. Finally, he combed it again. - When cutting an elf's hair, if you want to grow bangs, comb out the bangs from the top of your head and trim it according to your preference. If you don't want bangs, you can comb all the hair directly to the top of your head and grab it tightly before cutting it. Your fingers will pinch the ideal length and cut it. Then, straighten the hair, pull out the thin hair layer vertically, and cut it vertically. Finally, continue to trim the remaining hair. You can refer to the hair area that you cut before as a ruler to complete the trimming. After that, you can also trim the edge of the tail. - High Ponytail Technique: - Keep your hair clean and moist before cutting it (if you have just washed your hair, spray it with a spray of clean water). You can bend down and lower your head or stand straight to comb the high ponytail. Comb the hair to the top of your head and tie it in the middle (you can use a mirror to determine the position). Use a rubber band to firmly tie the hair close to the scalp. Then tie another rubber band below the ponytail and cut it directly above the second rubber band (grab the end of the hair with one hand and cut the excess hair with the other). After cutting, loosen the hair and comb it. If the end of the hair is not neat, you can tie the ponytail high again for trimming. Pay attention to avoid hair that is slanted out. You can move the ponytail to make the hair flat. - There were also some who used a large comb and a large incision, cutting the top of the head in a shape that was long in front and short in the back, and the side area was long in the top and short in the bottom. The guide line can be vertically clamped upwards to make the front long and the back short layers appear. For super thick hair, it can also be cut into the shape of the front long and the back short, input it to raise it to determine the guide line and connect it, so that the front can be infinitely lengthened and finally trimmed short. It can also be fully opened and the upper cutter head can be hung up and down to form the inner layer. After the output, the outline can be trimmed. After cutting the front inner layer, press down to see if there is any extra long hair.