Mooncake handmade video tutorial kindergarten
The following is a tutorial on how to make mooncakes in kindergarten: 1. [Materials: Paper, scissors, pen, glue, etc.] 2. Production steps: - First, he folded the paper in half, then drew the shape of the mooncake on the paper. Then, he cut the shape of the mooncake and cut it into four pieces. - He took out the top and bottom pieces and pasted them with a piece of paper. - Then, he took a long piece of paper and pasted it on the fence to make four different scenes. - He stuck Velcro on the fence. - He drew all kinds of furniture parts, then drew people (such as Miffy's family), traced their outlines, and designed a set of clothes for them. - He folded the furniture and placed them in the four scenarios. He also placed food in the refrigerator. - After setting up the four scenes and sticking them together, they had the Mooncake Shack Chee Chee Le. In addition, there was also a manual for making mooncake blind boxes: 1. Materials: Paper, pen, scissors, double-sided tape, etc. 2. Production steps: - He drew a mooncake pattern on the paper and colored it. - After placing a piece of paper on the back, he cut it out to get the mooncake pattern and the blank mooncake. - He wrote the contents on the blank mooncake and stuck double-sided tape on both sides. - He cut the mooncake pattern in the middle and pasted the pattern on it. The mooncake blind box was ready. Read more exciting novels for free
Mooncake shooting tutorial, photography video tutorial
Here are some mooncake shooting guides: 1. ** Shooting with professional equipment ** - ** Equipment preparation **: Canon 6D2 camera, 100mm lens, Shiniu Flash 600 second-generation light, etc. - ** Lighting ** - [Main light: Use a Divine Bull Flash 600 second generation. The accessories are standard covers. Light the background at the two o'clock direction on the back right side. To create a window effect, a window pane can be added in front of the light.] - "Assist light: Use another Shiniu Flash 600 second generation, and choose a long soft light box as the accessory. Light the main mooncake on the front right side. Pay attention to the position of the lamp head not to lean towards the background to avoid affecting the background light effect. - "Light fill: Use a large foam board to fill the light on the left side. If the shooting time is during the day and the fill light effect is not good, you can add natural light to make the light ratio more uniform. - ** Concept of composition **: For example, use the door as the background, place the main body on the table, arrange the props according to the rhythm of height, and use a flat angle to reflect the daily feeling. - ** camera parameters **: Aperture set to 5.6, shutter speed 1/160 seconds, USB 100, main light output 1/8, auxiliary light output 1/32. - [Post-production plan: adjust the white balance, increase the brightness of the shadows, increase the clarity and contrast, sharpen the outline of the props and the main body, and reduce the saturation of the blue primary color to reflect the dark atmosphere.] 2. ** Phone Shooting ** - ** Creating a sense of atmosphere **: Place the mooncake on a white plate, turn on the phone's 2x focal length (to prevent the plate from distorting), use some green plants as the background, and focus on the mooncake on the three-point line under the nine-square grid. - [Increase layering]: Take a book and place it under the plate. Use the top-down angle to center the composition. You can also place some cutlery on the side to form a parallel diagonal line. - ** Framed composition **: Break some mooncakes apart, take a cup, and use the cup handle to form a framed composition. The combination of virtual and real will create a sense of atmosphere. - Other techniques: Find a well-lit window, take two white rags, and pose the mooncake. Use the desk calendar as a prop to magnify it twice and make a diagonal composition. You can take a cup of tea as the background, click the portrait mode, adjust the aperture value to F2, and focus on the mooncake to create a sense of reality. You can also cut the mooncakes and stack them up and down. Find a magazine as the background, place the mooncake in a good position, magnify it three times and place the mooncake on the right three-point line. 3. ** Shooting in different styles ** - ** Simple Shooting ** - [Props: Various colors of cardboard. Melon seeds, walnuts, peanuts, and other common mooncake ingredients or grains may be used.] - ** Light **: Two lights to create a shadowless effect, shooting in the light. - ** Cameras and composition **: Aerial shot (God's perspective), using the golden ratio composition. - ** Chinese Style Shooting ** - Setting up the scene: Find a Chinese window pane and all kinds of old boards to set up the front and back. Find a Chinese vase that is similar to the color of the cheongsam and insert golden osmanthus. When the back is in space, you can hang calligraphy practice paper, pen rack, cast iron pot, etc. on the background cloth. Or use two boxes of mooncakes, a small porcelain plate, oil painting background paper, and a small table as props. You can also use two boards and a few old wooden trays. Add the four treasures of the study and tea set to create a Chinese atmosphere full of books. - ** Light distribution **: It can be used as a single bare light + standard cover, backlit on the right, and filled with light on the front left side. - ** Shooting method **: You can take a test shot, the photographer can take a selfie (such as a 10-second selfie after changing into a cheongsam after the scene is set up), take a close-up of the mooncake, etc. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Handmade video tutorial on Ultraman monsters
There were many hand-made guides on Ultraman monsters: - To make a small monster with ultra-light clay: first take the green ultra-light clay and rub it into a round shape, then rub one side into a water droplet shape. Gently press the tail flat and keep the curvature smooth, and press the front half in to make the body prototype; Take the yellow clay and rub it into a round shape, stick it on the belly, and press it with a tool to make traces; Use the black clay to rub it into a round shape and flatten it to make eyes; The green clay is rubbed into a slightly longer water droplet shape and adjusted into the shape of a leg; The yellow clay is rubbed into five balls of different sizes, and the small balls are pressed flat on the back. - Clay making of Abu Doralus: The title of the video was "#Creation inspiration clay handcraft moment: Ultraman monster Abu Doralus #Clay tutorial #Clay Ultraman monster #Clay handcraft #Bunny clay @ TikTok Little Assistant", but the specific production steps were not given. - Clay Crafting Stegon: The title was "#Creation Inspiration Clay Crafting Moment: Pinch Ultraman Monster Stegon #Clay Tutelage #Clay Crafting #Clay Ultraman Monster #Bunny Clay @ TikTok Little Assistant". No detailed steps were given. - "Clay making gogo: The title is"#Creation inspiration clay handmade moment: Ultraman monster gogo #Clay tutorial #Clay handmade #Clay Ultraman monster #Bunny clay @ TikTok Little Assistant ". The specific production steps are not given. - [Monster Crafting (It is not clear whether the material is clay or not): First prepare the materials, choose the color and shape you like; cut out the patterns of different parts such as eyes, mouth, ears, etc. according to the template; put the various parts together and adjust them according to your preferences; finally, name the monster and leave a photo of the creation.] <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Hairdressing video tutorial for kindergarten students
The following is a video tutorial for kindergarten students: 1. [Preparing: Prioritize choosing a clipper with calipers or a triangular fixed shaving technique.] If the child's hair is hard, straight, and stable, you can consider using a comb to shave it, so that the outline is straighter. 2. Hairdressing Steps: - Starting from the back: push the clipper parallel to the scalp and up to the back of the ear; then push the comb vertically to the scalp and back to the back of the ear; then press the ear with your hand and push the comb diagonally down to the back of the ear to complete the side trimming. For the left and right side of the hair, use the same method to push it behind the ear, then push the comb diagonally up to the front of the temple to ensure that it is trimmed clean. - Trimming the back area: The comb was parallel to the scalp and pushed to the occipital bone to complete the trimming of the back area. The uneven area was pushed again. - Clean up the broken hair: Open the clipper, clean the hair on the sideburns and ears, and then clean the back area and the left side of the broken hair. You can use the C-type technique. - Trimming the top of the head: Use the serrated scissors to trim the hair on the top of the head to the bangs, ensuring that each hair is of equal length; then use the flat scissors to trim the bangs into an oblique shape and blow dry them with a hairdryer. Finally, use the tooth scissors to trim the bangs vertically to achieve the desired thickness. Then use the tooth scissors to trim the hair on the top of the head, paying attention not to trim the same place repeatedly. Or, he could follow the following steps: 1. First, use a blade-shaped electric push, with a 3mm calliper, support the top of the head with your left hand, and use a straight up and down technique to cut the hair on the right side, pushing it to a suitable position (such as a corner). Then use the same technique to cut the hair on the back and the left side (push the back to the top of the occipital bone and below the head rotation). 2. Use a comb to pick up the hair and trim the corner area. Be careful not to stick the comb to the scalp. 3. Again, bring the 3mm calliper and cut the edge line. Push it to about two fingers high, not to the corner area. 4. The blade was fully turned to 2.0, and the edge of the hair was directly swept clean. 5. Take out the fishbone scissors or the regular tooth scissors to trim the top of the head. Pay attention to the comb to keep the same length for every piece of hair picked up. It could also be operated like this: 1. He pushed the calliper to his fingers and used a straight up and down technique to push the hair to the other side. If there were broken hair, he could push it a few more times until it was clean. 2. The comb was placed close to the scalp and trimmed the hair from the forehead back. The top hair was trimmed according to the lower hair to maintain a natural connection. 3. He adjusted the hair straighter to 2mm and cleaned the hair at the hairline. 4. He used a comb and scissors to remove the hair on top and only trimmed the ends. The other method was as follows: 1. Standing behind the child, she combed her hair from front to back with a comb and trimmed the ends of her hair with a pair of scissors until it reached the curl of her head. 2. Trimmed the middle hair, and decided whether to trim the ends or cut more according to the desired length. 3. Cut the left side of the hair on the top of the head (also decide whether to cut the ends or more according to the length you want), and then trim the right side of the hair. 4. First, he determined the length of the top of his head, then combed his hair with a comb and thinned the roots with scissors. He was careful not to trim the same place twice. 5. He turned on the blade and started sweeping his hair from the sideburns up to three fingers high. He continued to sweep his hair back and pushed his hair up four fingers high with the C-shaped technique. The hair on the right side was also swept up to three fingers high. 6. The comb was placed vertically downwards, close to the scalp, and flattened the corners. The hair on the occipital bone was pushed back, and the hair on the right side was also flattened with the same technique. 7. Finally, he used a pair of scissors to thin out the thicker hair below the corner. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Dress show kindergarten video tutorial
The following is the general content of a kindergarten video tutorial for a dress show: * * 1. Dress Making (Can be done by parents and children together)** 1. * * Material preparation ** - He could use waste materials, such as old newspapers, bubble wrap, woven bags, etc., or colored paper, patterned paper, and other materials. If he wanted to make something similar to an astronaut costume with special effects, he might need tools such as balloons (to make a helmet model), white rubber, scissors, a utility knife, transparent tape, colored tape, and so on. - Velcro could be used to make connecting parts such as buttons (if the gown had such requirements). 2. * * Design and Production Steps ** - She would design the dress according to the style that the child wanted. If you want to make a dress out of newspapers, for example, you want to imitate Anne Hathaway's style on the red carpet at the Venice Film Festival (refer to the relevant ideas): - First, the shape of the newspaper was cut according to the size of the child, which would be the main part of the dress. For example, the skirt could be stacked with multiple layers of newspaper, and the edges could be glued to fix the shape. - The upper body of the gown could be decorated with colored paper or patterned paper to increase the aesthetics of the gown. - She used scissors to cut out the neckline, cuffs, and other shapes. She could also create some wrinkles to make the dress look more exquisite. - If the bubble wrap was used to make a dress, such as a tutu skirt, the bubble wrap could be layered and fixed at the waist, and then wrapped with patterned paper or colored tape for decoration. * * 2. Runway rehearsal ** 1. * * Basic posture training ** - Let the child practice standing posture, with his feet slightly apart, stomach in, chest out, shoulders relaxed, chin slightly raised, and eyes looking straight ahead. - Practice your walking posture. Your steps should be light, slow, and rhythmic. Your toes should touch the ground first, your knees should be slightly bent, and your arms should swing naturally. The range should not be too large. 2. * * Expression-training ** - Teaching children to smile, to look confident and generous can be achieved by practicing in front of a mirror. 3. * * Stage movements ** - Design some simple movements according to the style of the dress. For example, if it was a princess-style dress, you could gently lift the hem of the dress during the catwalk, or turn a small circle at a fixed point on the stage. - If it was a creative dress, such as a special dress made of waste materials, the action could be designed according to the theme of the dress. For example, the "Little Guardian of Green Protection" dress made of woven bags could display some environmental protection signs or promote environmental protection gestures on the stage. * * 3. Stage arrangement and music selection ** 1. * * Stage arrangement ** - A simple red carpet could be set up or a T-shaped area could be made with colored paper. The stage could be decorated with balloons, ribbons, and other decorations to create a catwalk atmosphere. 2. * * Music selection ** - Choose light and lively music, such as some classic children's music or fast-paced pop music (suitable for young children's catwalk rhythm). The style of the music should match the style of the dress. For example, an elegant dress could be matched with a piece of classical music. * * 4. Video Shooting ** 1. * * Equipment preparation ** - Use a phone or camera to ensure that the device has sufficient battery and storage space. 2. * * Shooting angle ** - It could be filmed from the front, side, back, and other angles to fully display the child's catwalk process. - Pay attention to the use of light when shooting to avoid areas that are too dark or too bright, which will affect the video effect. 3. * * Post-production (option)** - If necessary, he could use some simple video editing software to edit the video, remove the excess parts, and add some subtitles or special effects, such as adding the introduction of children and dresses at the beginning of the video. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Handmade Pikachu tutorial
Here are some handmade Pikachu manuals: - * * Origami Pikachu (Plane)**: - Prepare a 10 * 10 cm square yellow colored paper. First, he folded it into a small square. - Fold the corners of both sides to the center line, both front and back, then open it and fold it inside according to the crease. - Fold the lower corner upwards, align the lower corner with the inner corner, and then fold it upwards. The reverse folding method is the same. - The lower corner was folded into a crease, and the upper two corners were folded over. - Finally, he used a watercolor pen to draw the expression. - Origami Pikachu (3D): - Prepare a piece of 7.5cm * 7.5cm square paper and a colored pen. - First, he folded the square paper into a "Mi" crease, then used a colored pen to draw Pikachu's eyes, nose, mouth, and blush in the center of the square paper (the upper half of the "Mi" was drawn for the eyes, and the lower half was drawn for the other parts). - Turn the paper over and fold it inward along the crease on the opposite side of the eye and mouth, creating a double-layered triangle. - The side with the mouth on it was facing up, and the left and right corners of the triangle were folded up toward the center line, and then the left and right sides were folded toward the center line. - The left and right corners were folded back, and the small triangle was inserted into the big triangle to be fixed. - Turn to the back and repeat the previous step. - He folded up the left and right corners and used a black pen to draw Pikachu's ears at the tip of the corner. - He blew into the opening to make it bulge and fold it. - * * Pikachu: - Prepare a 260-centimeter long yellow balloon. - He made a single-ear knot the size of a finger, then twisted a long bubble about four fingers long, then twisted a single-ear knot the size of a finger and a long bubble about four fingers long, and connected them with the first single-ear knot. - Using the same technique, he made a set of four finger-long bubbles around the two single-ear knots and arranged them. - Using the center of one of the long blisters as the dividing point, two long blisters were made on average (as the two legs of Pikachu). - Using the center of the other bubble as the dividing point, he pushed the balloon to the middle to make a Pikachu ear. - He took an appropriate length and tied a knot. Then, he tied the rest of the knot to another ear knot and continued to twist it together with the previous ear. - He used a black pen to draw two semicircles on the two ears of the balloon, then drew the eyes and mouth. - * * Self-made Pikachu mini bag (not the whole process of making the bag, but to display the Pikachu theme of the items in the bag)**: You can prepare some Pikachu-related items and put them into the self-made mini bag, such as Pikachu cleaning spray, Pikachu lipstick, Pikachu mirror, Pikachu puzzle, Pikachu homework, Pikachu bank card, etc. - * * Pikachu Charger (complete production process not specified, materials required)**: Requires clay, portable power source, iron wire (tail), hot melt glue, heat gun heating, expansion foam, clay, paint, and other materials. - * * Using AI to make Pikachu animation videos **: - Use Kimi to generate hints for plot scenes (For novices, the creative design phase is difficult, so you can use AI). - Using the AI video tool to generate an animated video, click on the "AI Image" function, copy and paste the image scene prompt words generated by Kimi into the input box, select the 3:4 size and the number of generated, and click generate. He selected one of the generated images and clicked on the "Create Video" function at the bottom right corner. Then, he copied Kimi's prompt into the input box and clicked on the "Create Video" function. - He used editing to edit the Pikachu animation video generated by Kling. He edited it according to the plot order, added Pikachu sound effects and background music, and then released it. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Handmade novel card tutorial
The following are a few handcrafted card courses: * * 1. Ordinary Handmade Card Tutelage ** 1. * * Material preparation ** - Print paper, scissors, glue or double-sided tape, colored pens or paint, decorative materials (such as ribbons, small beads, etc.). 2. * * Production Steps ** - Prepare the backing paper for the card: Choose a piece of white printing paper of suitable size and fold it into the shape of a card. - Design: Use your imagination to draw patterns on the card with colored pens or paint. If you're not good at drawing, you can use decorations such as paper or paper cuts. - Add words such as "Happy Birthday" and "Happy Festivities" with a colored pen or paint. - Add decorations: Glue or double-sided tape the shiny beads, tassels, and other decorations on the card to ensure that it is secure. * * 2. Paper Art Daisy Greeting Card Course ** 1. * * Material preparation ** - Cardboard, colored paper, glue, scissors, colored pens, and if you have the conditions, you can find small diamonds, small beads, and the like to make stamens. You can also find colored paper and crepe paper. 2. * * Production Steps ** - Making petals: There are three sizes of petals: 14 cm, 16 cm, and 18 cm in diameter. Use the three-fold method. Cut some on both sides into an arc (the bottom cannot be cut open, but the middle is cut open and cut into an arc). There are two petals on one side. When opened, there are a total of 16 petals. Make one to two layers of each size, then stagger and overlap. - Assembly: Glue the petals on the cardboard, and use decorative beads or diamond-like decorations to make the stamen (if there are no diamond-like decorations, use buttons, cotton balls, etc.). * * 3. Paper art photo frame greeting card tutorial ** 1. * * Material preparation ** - Cardboard, transparent plastic card, scissors, glue, double-sided tape, foam double-sided tape, ruler, colored pen, ink pad, pen knife. 2. * * Production Steps ** - To make the first layer of transparent display window, use a pen to dig a box on the cardboard, glue the transparent plastic card and cardboard with double-sided tape, and use a stamp to color the cardboard (if there is no sponge, use a napkin to crumple it before using it). - To make a colored background board under the transparent frame: fix it on the cardboard with glue, and use foam double-sided tape to glue the middle of each layer. Then fix the decoration displayed in the middle on the colored paper background (the decoration in the background board can be fixed or not), and finally draw a decorative line on the outside of the transparent frame. * * 4. Paper Art Butterfly Greeting Card Course ** 1. * * Material preparation ** - Prepare the corresponding materials according to the template provided. 2. * * Production Steps ** - After making the greeting card according to the template, he could color it himself. * * 5. Self-made small card tutorial ** 1. * * Production Steps ** - First, he cut out a bunch of small cards and drew the pattern on the back of the card (you can take a screenshot and draw it). Then, he randomly drew some patterns on the front and back of the card and pasted them together. Then, he made a card bag and wrapped the small cards in it. Finally, he made a card holder and pasted a transparent plastic sheet to decorate it. * * 6. Self-made card slot box tutorial ** 1. * * Production Steps ** - He first glued the two cards together with transparent glue, then cut the cards diagonally and glued them on both sides. He stuck a layer in the middle, then cut a piece out and glued both sides together. Finally, he put them together and made a little decoration. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Handmade lantern making tutorial
The following are some handmade lantern making tutorial: ** 1. Use two pieces of A4 paper to make lanterns ** 1. He aligned the two pieces of A4 paper with the edges aligned. 2. He stuck one end of the paper together with the transparent tape, then stuck the bottom of the two pieces of paper together along the bottom edge. 3. Using the same method, he glued the other end of the paper to the side, forming a closed rectangular shape. 4. The four corners of the lantern were folded inwards to form an arc at the top, completing the shape of the lantern. ** Two, similar to how Dad made lanterns (using a variety of materials)** 1. He cut out a piece of transparent tape and painted it red. Then, he placed it in four squares with toothpicks and pasted the mooncake star decoration on it. 2. Then, he stuck a layer of transparent glue on top of it, folded it around the edges, and stuck it on top and bottom in the same way. 3. Punch holes up and down, cut the rectangular paper into 0.5 cm thin strips, stick a red string and roll it up, then stick a yellow paper decoration, and pass through the holes. 4. He folded the edges and stuck them together. He passed the hemp rope through the top and tied the tassels to the hemp rope. He placed them into the lamp and the ancient lantern was ready. ** 3. Making lanterns with mineral water bottles (example 1)** 1. Every 1.5 centimeters, he cut the plastic bottle into strips. 2. Thread a tassel at the bottom of the bottle, put a red balloon at the mouth of the bottle and blow it up. 3. He closed the bottle cap and tied a rope to the small wooden stick. ** 4. Making lanterns with mineral water bottles (example 2)** 1. He cut off a section of the mineral water bottle and pasted it on the yellow colored paper. 2. He made a small rabbit out of white paper, pasted it on the round moon, drew its facial features, and pasted it with small hands and clouds. 3. He punched a hole in the water bottle, passed it through a string on a mooncake box, and put in a small lamp. ** 5. Making lanterns with cardboard ** 1. Cut out 12 ladders of the same size (for the lantern body) and 2 hexagons (for the bottom and top). - Hexagon production steps: - Draw a straight line on the cardboard and determine the center point. - He used a protractor to find the 60-degree and 120-degree points and connected them to form a hexagonal prototype. - The length of the hexagon was taken as the size of the short side of the hexagon. 2. He hollowed out the middle of the 12 echelons and 2 hexagons (one of the hexagons should be used as the base to leave a place for candles). 3. Cover the hollowed out part of the lantern with cellophane (can be omitted). 4. He stuck the two long sides of the ladder together, and the short side of the ladder was stuck together with the hexagonal side. 5. The hexagon that made the roof was tied to the thread and glued to the echelon. ** 6. Create a lantern with Photoshop (PS software)** 1. He used the [Oval Tool] to draw an oval shape as the outline of the lantern. 2. Press [Control + J] to copy an oval shape, turn off the fill color, and choose yellow for the stroke. 3. Clone the yellow oval and press [Control + T] to shrink it. 4. Duplicated the yellow oval multiple times and shrunk it freely. 5. Using the [Rectangle Tool], he drew an orange and yellow rectangular shape and placed it above the lantern. 6. He copied a rectangular shape and placed it under the lantern. 7. He added the hanging rope and the tassel at the bottom of the lantern to complete the simple lantern production. ** 7. Make a simple lotus lantern (can be used as a lantern for the Mid-Autumn Festival)** 1. After folding the pink square paper several times, draw the arc of the petals on it, cut off the excess parts, and paste the glue on the short crease after opening it. 2. He took a paper cup, cut off the bottom, tied it with a string, and placed it in the middle of the petals. He folded the petals and stuck them to the cup. 3. He used green paper to make lotus leaves. After folding and opening them many times, he put them away along the traces. After folding and sticking them together, he made two lotus leaves and stuck them together. Then, he applied glue to the lotus leaves.
Olympic handmade hat tutorial
Here are some tips on handmade Olympic hats: 1. ** Wind Forest Oasis Handmade-Winter Olympics Snowflake Hat ** - Thread used: Sister 28's 26 pieces of cashmere, 4 strands, two-color thread, a total of 62 grams. The size of the hat is 54cm. - Needles used: 3.25mm rod knitting thread, 3.75 needle knitting main body. - Weaving method: Start with 128 needles, use a 3.25mm rod to knit a single thread (about 40 rows), change to a 3.75mm needle, knit 1 row of lower needles, start to weave the pattern, after knitting (16cm above the thread), then weave 2 rows of 2 and 1, and the broken thread will be tightened. 2. ** Little Snowflake Hat ** - Thread: 28 sister's home 26 pieces of cashmere 3 strands, tricolor thread a total of 52g, hat size and the above snowflake hat the same. - Needles used: 4mm rod for knitting thread, 4.5mm for knitting main body. - Weaving method: Start with 112 needles, use a 4mm rod to knit a single thread (about 36 rows, 10cm), change to a thick needle, knit 1 row of lower needles, and start to weave the pattern. After the embroidery was completed, he continued to weave the plain needle until he measured about 16cm from the end of the single thread. He began to reduce the needles and knit three rows of 2 and 1 needles. Finally, he broke the thread and strung the needle circle. It could also be woven with four strands of thread according to the weaving method of the big snowflake hat. The pattern was 8 needles per flower, and the total number of needles was 128. The hat woven was thicker. 3. ** Crochet tiger hat similar to Winter Olympics (no detailed tutorial, only name mentioned)** 4. ** Crochet Illustration: Winter Olympics Tiger Head Fisherman Hat (No detailed tutorial, only the name is mentioned)** While watching the Olympics, you can also read the wonderful novels related to the Olympics!
The kindergarten made a handmade camera
If he wanted to make a handmade camera in the kindergarten, he could use discarded paper boxes, beverage bottles, tape, and other materials to make it. First of all, the main body and lens of the camera were made of paper boxes and disposable paper cups. The small paper box was glued to the back as a display screen and painted as a whole. Then, he used a computer to print out the instructions or patterns on the colored cardboard, used the cap of the beverage bottle to make the side knob, used clay or soft pottery to make a disc-shaped tape and fixed it on it, and then used the remaining materials to make other details. This way, he could make a fun handmade camera toy. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Handmade ideal hats in kindergarten
Here are a few ways to make hats in kindergarten: * * 1. Make an astronaut helmet from newspaper or A4 paper (can be used as a creative hat)** 1. * * Material preparation ** - balloons (larger after being inflated, used to make helmets), large bowls, white rubber, water, newspaper or A4 paper, small brushes, art knives, scissors, tape, colored tape, etc. 2. * * Production Steps ** - He inflated the balloon and placed it on the big bowl with the mouth down. - Mix the white gel in a small bowl (add an appropriate amount of water, not too diluted). - Cut the newspaper or A4 paper into small squares. - Use a small brush to dip in the prepared rubber, brush it on a paper towel or newspaper, and evenly interweave it on the balloon. It needs to be pasted in 7 - 8 layers to make it stronger. - After the paste was done, it was dried overnight or blow-dried with a hairdryer (to dry it thoroughly). - After confirming that it was completely dry, he popped the balloon and took it off to obtain the helmet model. - Using a utility knife and scissors, he cut out a place where he could show his face and cover his neck. - After decorating the cut edges, he wrapped the edges with tape, and then used colored tape to circle the lower part of his neck and the edge of the mask. - He could try it on and adjust it, and he could even let the child draw a pattern he liked. - He added some small accessories according to his preferences. * * 2. Children's cap (suitable for babies under 3 years old)** 1. * * Material preparation ** - Large circle (40 cm in diameter), rectangular (40 x 13 cm, or slightly narrower 40 x 10 cm), long cloth strip (80 x 4 cm). 2. * * Production Steps ** - Marks were made on the long cloth strips every 3 cm, and pleats were pinched at 3 cm. There were a total of 34 pleats, and 34 pins were used to fix them. - He drew an arc at the pleats and cut them out. - Use a 40 x 13 cm (or 40 x 10 cm) rectangular edge to wrap the folds. - The cut gap was pleated and hemmed, and two decorative flowers were made. - After folding it, sew it firmly and turn it over to the front. The hat is completed. * * 3. Animal hat (Take the rabbit hat as an example)** 1. * * Material preparation ** - Cardboard (54 cm x 31 cm, if the child's head is larger than 51 cm, the length will be increased and the new number must be divided by 2), paper clips, straws, PVP glue, scissors, etc. 2. * * Production Steps ** - He began to glue the cardboard together in a certain order, using a paper clip to hold the paper together until the glue dried. - When making rabbit ears, if the ears fell off, a straw could be put in to prevent them from bending. * * 4. Crown hat (Girls might like it)** 1. * * Material preparation ** - 3-layer cardboard, paper of different colors, paint brush, paint, PVP glue, dry paper glue, general glue, marker, scissors, etc. 2. * * Production Steps ** - He used a marker to scrape off the shape of the crown on the cardboard and cut it off with scissors. - Cover the cardboard base with PVP glue, place the colored napkin on the glued crown, and apply green paint. - The entire decoration was made of colored paper, and finally, it was made of universal glue beads. * * 5. Rainbow Hat ** 1. * * Material preparation ** - Colored paper, milky white glue, crepe paper, colored pens, etc. 2. * * Production Steps ** - He used colored paper to cover the hat with a beautiful rainbow. - Using crepe paper and other materials to decorate the hat with cute little "cotton balls". - After the final filling, the rainbow hat was completed. * * 6. Dr. Paper Hat (Can be used during graduation season or for creative craftsmanship)** 1. * * Material preparation ** - Black cardboard, scissors, etc. 2. * * Production Steps ** - Prepare the black cardboard and cut two rectangular pieces of cardboard of the same size. - Roll the rectangular cardboard into a circle and cut a circular cardboard for later use. - Cut out a square piece of cardboard and make it into a hat with one of the circles. - The tassel can be glued to the top of the hat (if decorative). <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>