What does backhand positive glue mean?
Backhand positive glue refers to sticking the positive glue rubber on the backhand position of the table tennis racket. Positive rubber was a kind of rubber with short particles. The particles faced outwards, and the length and diameter of the rubber particles were basically the same. It was not afraid of spinning, had good elasticity, and was stable when hitting the ball. It was one of the rubber commonly used by straight fast-attack athletes. There were specific technical requirements and playing characteristics when using the backhand positive glue. For example, when hitting the ball, the racket shape should not be too forward. The moment the ball was hit, the ball should be hit and there should be a forward impact action after the ball was hit. When playing the topspin and backspin, the racket should be slightly back, hitting first and then moving forward. When starting the backspin, the core of the body should be tightened, and the racket should be used by the waist and legs. Read more exciting novels for free
Backhand Glue
The following are some of the routines for backhand long glue: - ** Attack pattern **: - ** Rash **: Rash can be used for no-spin balls or weak backspin balls that are the same height as the net. First, spin the forearm outward, with the backhand long rubber facing down, and then spin the forearm inward to hit the middle and upper part of the ball. At the moment of hitting the ball, the plate shape is slightly forward, and the tooth root friction ball is raised a little arc. After hitting the ball, the forearm is in a state of internal rotation, with the backhand long rubber facing up. - ** - ** Dealing with a long ball that doesn't spin **: The long rubber face first tilts forward and shines forward along with the movement. Depending on the ball's rotation, it will touch the upper or middle part of the ball. Then, the forearm will rotate inward. The surface of the ball will tilt forward to the bright board. The arc action will make the ball roll down the slope and pick up the ball. - ** Backhand position followed by forward rush, side squeeze and push **: The speed of returning the ball was only slightly slower than the incoming ball. - ** Backhand Short High Spinning High Hanging **: The racket head is knocked upwards (similar to the action of knocking the wooden fish), or the same racket hand shape is used to push the upper part of the ball to the left. The effect of the ball that is swept horizontally is similar to the effect of a high ball. - When the opponent retreated from the stage to attack the ball, the backhand sucked the short ball; when the opponent came up, the backhand dribbled the long ball; when the opponent attacked quickly, the backhand blocked the board to disrupt the rhythm. - When receiving the ball: If you can attack and pick up the ball, you will use the long rubber's good offensive ability to start playing in the first three boards. - ** Defensive Tactics **: - ** Receive the serve **: The horizontal board backhand long glue doesn't eat the serve. When you can't see the opponent's serve spin clearly, boldly use the long glue to receive it. The more the opponent turns the serve, the more the long glue can borrow the force to return the ball to the stage. If the serve doesn't turn, the long glue will also float and make it difficult for the opponent to attack. You can also learn Ito Misei's raw rubber receiving technique "side stab"(outer pocket turn, inner pocket turn). The racket touches the lower side or bottom of the ball, exerting force diagonally upward. The return ball has a side-down turn, and after landing on the platform, it turns to the side. The landing point can be in the opponent's forehand position or backhand position, which is conducive to the next hand reverse rubber attack. - ** Dealing with loop attacks **: When the opponent attacks with the loop ball, the backhand long glue will immediately reverse the spin and change from top to bottom, making it difficult for the opponent to continuously attack with the forward loop ball and can only pull the loop ball; the pulled loop ball will turn into a strong backspin ball with a long glue. If the quality of the pulled loop ball is not high, the player with the backhand long glue can score with his forehand sideways. - ** Dealing with the backspin ball **: If the long rubber ball is used as a cutting ball, the backspin can be used in a high-profile manner. Once the ball is high, it can be directly smashed. However, the high ball should not add too much friction to prevent it from falling into the net. When receiving a serve, you can push it all out. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Penhold Grip, Positive Glue, Backhand Technique
The key points of penhold positive rubber backhand technique were as follows: 1. ** Up and down ** - ** Body center of gravity and racquet lead **: Before hitting the ball, you must quickly move your body center of gravity to the left according to the incoming ball, turn your waist to the left and back, and give way to the racquet lead position. Grasp the racket with your index finger and adjust it to a forward angle to ensure a stable arc. - ** Waist Turn Force **: Similar to the horizontal board backhand attack, turning the waist from left to right has an important auxiliary effect on the quality of the ball. After hitting the ball, as the body's center of gravity shifted, the arm should be relaxed appropriately and not too tightly clamped. - ** Hitting action **: Turn your body's center of gravity to your left foot to support. With your elbow as the axis, swing your forearm to the front right and above to instantly complete the impact and friction with the ball. When hitting the ball, the shape of the racket should be controlled according to the strength of the backspin. If the backspin is strong, the racket shape can be slightly upright but not backward; if the backspin is not strong, the racket shape can be pressed a little more to ensure the arc of the ball. 2. ** Connection after the incoming ball **: If the opponent receives the ball back, the rapid restoration of the center of gravity and arm is the key to the connection of the next board. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Galaxy Volcanic Rock 7 backhand with what glue
If it was the Galaxy Volcanic Rock 7 backhand glue, for defensive play, you could choose 729 Tianyi, Qiyuan, etc. You could also refer to the general backhand glue idea, which was to take into account the leverage and force, the transition ball and the opportunity ball, and the backspin and topspin ball. Don't choose too soft, so as to avoid easy spin, weak and unstable feeling. In addition, if the feel is not so delicate, you can also try the Speedy 3, but generally, those who pursue the feeling of eating the ball should not be equipped with the Speedy 3. You can also choose the internal rubber, such as the 729 blooming loop type. " The Legend of the Three Dragon Scales in the Milky Way Continent " is equally exciting. Everyone is welcome to click and read it!
How to catch the side spin ball with the backhand long glue
Take the right hand versus right hand as an example. Due to the unique properties of the long glue, it was often more difficult to control when receiving a left spin or left topspin serve than when receiving a backspin serve. Therefore, for the long glue play, when the opponent's left spin or left topspin serve was of high quality, the "side squeezing technique" could be used to restrain the opponent's spin to strengthen the control of the return serve. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
How to use the straight positive glue and reverse glue
1. ** How to use the straight glue ** - ** Rubber-sticking Method **: It is a particle glue. It is used by sticking the particles outward on the sponge (it can also be directly pasted on the bottom plate). - ** Hitting characteristics and strength **: - The positive rubber was slightly harder and had better elasticity. The ball was instantly removed from the board, and the friction was smaller than the reverse rubber. It was not easy to create rotation. - When the ball is turned up, the plate type is slightly pressed, and the force is exerted forward to hit the upper or middle part of the ball; When the ball is turned down, the plate type is slightly tilted, and the force is exerted upward more than forward to hit the middle and lower part of the ball. The main thing was to use force to attack. - ** Suited fighting style **: - The positive glue was very elastic, and the ball was instantly released from the board. Under the support of the sponge, its elasticity increased greatly, and it was extremely aggressive, suitable for speed attacks. - The speed of the positive rubber is fast, and the ball will sink after landing on the platform. The more force you exert, the more obvious the sinking will be. The positive rubber rub ball does not rotate slightly compared to the reverse rubber, but you can also control the force to rub out the ball to rotate or not to rotate. When the opponent returns the ball slightly higher, you can pick it up in the platform. It is a more difficult technique to play the loop ball with the positive rubber. In the face of the rotation of the reverse rubber, you have to approach the platform to exert force, and use the impact to offset the rotation. The plate type is slightly vertical, the direction of force is slightly upward, and the forearm force directly hits the ball in the rising period. The straight-board face-off could use the first three board tactics, such as the short serve point, forcing the opponent to rub or flip, and the forehand directly attacking. 2. ** How to use the reverse glue on a straight board ** - ** Rubber-sticking Method **: Use it by sticking the rubber particles inward onto the sponge. - ** Hitting characteristics and strength **: - The reverse glue was slightly softer, and the surface friction was strong, making it easy to create rotation. The surface of the reverse glue is divided into two types: sticky and astringent. The sticky surface can make the ball spin more intensely than the sticky surface, and the astringent surface has a low stickiness, which reduces the ball's rotation speed but increases its elasticity. The surface contact area increases after contact with the ball. In addition, the surface of the racket is more sticky, and the friction force increases greatly. It can create balls with various spinning properties, and the ball will spin more strongly through the friction of the fast swing. - [** Suit playstyle **: Suit the loop drive and chop technique.] <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
What does backhand and forehand mean?
In table tennis, the palm of the hand moves toward the abdomen, and the forearm swings from the back to the front with the elbow as the axis. It is the opposite of the "forehand". The "forehand" usually refers to the side of the hand that holds the natural and conventional hitting action. In other situations,"backhand" had many meanings, such as "backhand catching an apple thrown over" or "backhand also", which meant that it was extremely easy to do something. For tennis, there were also techniques related to the forehand stroke (including the forehand stroke with one hand, the forehand stroke with two hands, etc.) and the backhand stroke (such as the backhand stroke with one hand, the backhand stroke with two hands, etc.). <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
backhand backhand shot
There were many ways to hit the opponent's backspin ball with a straight backhand: - [In-stage shaking (dealing with backspin balls): Similar to moving faster, using your wrist to shake the middle and lower parts of the marble, but faster and more ruthless.] - [Side Cut Shot (Against a long backspin ball)]: Similar to the action of the afterburner shot, but the racquet face is slightly tilted back, and the force is exerted from the side to violently cut the middle or lower side of the ball. The ball that bounced past spun sideways violently and was very fast, making it very difficult to return. When performing a backhand shot with a straight board, one should pay attention to the coordination of the wrist, arm, and waist to enhance the effect and lethality of the shot. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Teaching Backhand Backhand Basket
The following is the teaching content of the backhand backhand game: 1. ** How to hold the camera ** - The focus was on the thumb and index finger. The index finger was attached to the back of the board, the thumb held it up and clamped the board, and the back three fingers held the handle. Holding the board was similar to holding chopsticks. The whole body was relaxed. Only when exerting strength, he would grip it fiercely. Usually, he would keep it loose. He should avoid paying too much attention to the strength of the three fingers behind him and gripping the handle with all his strength to avoid losing control of his strength when swinging short and chopping long. 2. ** The related factors and solutions to the problem of insufficient backhand strength ** - ** The angle of the board shape **: The thumb can be adjusted when controlling the board shape with the backhand. The higher the thumb is, the more the board shape is pressed and the more force can be exerted. The lower the thumb is, the more upright the board shape is, and the easier it is to fly. When using the backhand, the thumb should be pointed up a little (it is recommended not to exceed the center line of the board), and watching excellent athletes (such as Sun Yingsha, Wang Manyu, etc.) in the backhand confrontation, it is known that their thumbs are pointed up to facilitate their own strength. When connecting the hands, the thumb needed to move up and down, and the range of movement had to be small to ensure smooth connection. 3. ** Backhand Technique Points ** - Backhand defense (for adults): After familiarizing yourself with the basic backhand drive, practice the topspin first, starting from defending against the loop drive. As your ability improves, increase the strength of the topspin. It requires the forearm to be placed higher, and the "master position's downward pressure" to receive the loop ball and hit the ball at the highest point. This technique is more practical for amateur players than close to the table. - [Backhand Backspin]: Backhand Backspin and Backhand Backspin were two techniques that were crucial to a slow dribble. At the beginning, you should find the drop point of the ball, and then take the racket toward the navel or slightly to the left. You should seek the feeling of kicking your legs and hitting your hips in one go. After you master the technique of pulling the ball down, you can practice the combination of rubbing and pulling. - ** Backhand Fast Arching **: This was a fast dial that was close to the table and had friction. The starting position was lower than the quick dial, and the board lit up. It leaned forward slightly, and the impact rubbed against the front. In a stalemate, you can take the initiative to add force and spin, focusing on establishing the feeling of the wrist, arm, and fingers when hitting the ball. - Pulling the ball in the middle: It was one of the core techniques of the horizontal board backhand. Stand about one meter away from the stage, with your feet parallel or slightly forward with your left foot. Lead the racket to the left side of your abdomen, press the plate shape, and support it with your elbows. In the beginning, you should look for the early stage of the descent to hit the ball. When you swing, you should have the feeling of facing forward first. The wrist, the inner side of the thumb, and the three or four fingers should work together. It is recommended to practice the diagonal line first. - ** Pushing (related to the horizontal swing)**: The pushing action is similar to the backhand push block of penhold grip. It does not require the player to complete the action. You just need to push the ball forward and backward. The action should be small first and then large. You can push the ball first and then push the horizontal swing. 4. ** Preparing before hitting the ball and the process of hitting the ball ** - ** Preparing posture **: Stand on the side of the front, with your feet shoulder-width apart, your center of gravity slightly forward, and the hand holding the racket in the center of your body. The racket face is parallel to the ground. - ** Waist Turn Ripping **: With the waist as the axis, turn the waist backward, and raise the arm and racquet upwards. When you take the lead, pay attention to the head of the racquet upwards and the face of the racquet facing the side. - ** Slapping the ball **: With the waist as the axis, turn the waist forward, drive the arm and the racket to swing down quickly. When hitting the ball, pay attention to the head of the racket facing down and the face facing the front. - ** Follow-up **: After hitting the ball, you still need to follow up with a follow-up action. 5. ** Grip conversion related ** - The grip usually needs to be adjusted when changing hands. There were two types of grip: the forehand grip and the backhand grip. When holding the racket with a straight grip, the racket was against the thumb and the index finger was relaxed. When holding the racket with a straight grip, the racket was against the index finger and the thumb pressed the racket. The backhand grip made it easier to adjust the angle of the racket when performing the backhand technique, and the force exerted by the wrist and fingers was smoother. When practicing the backhand and backhand conversion, muscle memory can be formed through special training. For example, if the backhand technique reaches a certain number of boards (long-term muscle memory can be formed after more than 30 days), the backhand will naturally adjust to the backhand grip. The same is true for the forehand. At the same time, high-intensity backhand and backhand conversion training, such as left-hand push and right-hand attack or two-point attack, would help to improve the conversion ability. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Backhand near 1860, backhand empty
This expression was commonly seen in the financial investment field, especially in gold trading operations. This meant that when the price rebounded (counter-draw) to the point of 1860, the reverse operation would be short (sell). This kind of operation strategy was usually based on technical analysis of price movements and judgment of market trends. For example, from a technical analysis point of view, if the previous price trend shows strong resistance around 1860, when the price is close to that point, the selling power in the market may increase, causing the price to fall, so investors will choose to go short at this position. At the same time, it was also possible to combine fundamental factors, such as the influence of macro economic data and monetary policy, to comprehensively judge the possibility of the price reversing around 1860. However, the financial market was complex and volatile. This kind of operation was risky and required investors to have rich experience, knowledge, and risk tolerance. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
I was actually defeated by a backhand and backhand
Since it was not clear what kind of sport you were talking about (such as table tennis, tennis, etc.), it was difficult to analyze the reason for being defeated. If it was table tennis, the backhand and backhand were very important in professional games. The backhand became the main scoring method after the ball was changed to 40+ points. The backhand and backhand of the professional players ranked higher were more balanced. In amateurs, a good forehand usually had a high upper limit, and a good backhand had a guaranteed lower limit. In terms of equipment configuration, most domestic athletes were equipped with sticky gloves for their forehands and sticky gloves for their backhands. However, sticky gloves for backhands were also becoming popular. If it was a shuttlecock, the backhand stroke involved many factors such as footwork, hitting point, direction of force, etc. For example, slow footwork may lead to a low hitting point, and incorrect technical movements may cause the ball to transition high. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>