Jewelry Shooting Focus
If you buy the first macro lens for jewelry shooting, it is recommended to choose a lens with a focal length of 60mm, which can increase the focal length by 0.5 times; the more expensive macro lens can increase the full size (1:1). If you use a digital single-lens reflex camera or a mirrorless camera to shoot small objects such as rings or earrings, you can also look for a lens with a focal length of about 60mm. With this lens, you can install the camera not far from the subject with a magnification of 0.5 times. If you have the financial ability, you can buy a macro lens that can shoot at a 1:1 ratio. In an example photo, the pearl was shot with a focal length of 36mm. Read more exciting novels for free
Shooting relics and jewelry
There were many factors to consider when shooting cultural relics and jewelry. For the shooting of cultural relics and jewelry, the first thing to pay attention to was the lighting. As some cultural relics are sensitive to light, such as paper, fabrics, prints, rubber paintings, colored leather, plant specimens, etc., the recommended illumination value is <50LX.(Color temperature <4000K); bamboo, wood, rattan, bone, lacquer, murals, natural leather, animal specimens and other light-sensitive items, the recommended illumination value is <180LX (color temperature <4000K); For the types of items that are not sensitive to light, such as metal, stone, glass, porcelain, jewelry, and glaze, the recommended illumination value is <300LX (color temperature <6500K). The most commonly used flash lamps in daily life, such as the Xenon Lamp, had a color temperature of about 6200K and an instantaneous illumination of more than 10,000 LX, far exceeding the tolerance of many cultural relics. Therefore, it was generally not possible to use flash lamps to shoot cultural relics and jewelry, in case the infrared and infrared rays in the strong light caused damage to the surface of the cultural relics and jewelry, causing the molecules on the surface of the cultural relics and jewelry to decompose or react to change the original characteristics. In addition, the violet rays in the sun could also cause damage to cultural relics, so in addition to avoiding flashes, it was also necessary to prevent cultural relics and jewelry from being exposed to the sun. Secondly, copyright issues also needed to be considered. If the cultural relics and jewelry were works that had signed an agreement with the museum or gallery, they were not allowed to shoot at will to avoid harming the interests of the relevant parties. If the above conditions were met, suitable lighting equipment could be used, such as soft lighting in the venue or some special photography lighting equipment, without damaging the cultural relics and jewelry. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Jewelry shooting lens recommendation
In jewelry shooting, macro lenses were recommended. For example, Canon's EF100mm f/2.8L MCROIS USM or RF100mm f/2.8L MCROIS USM. Nikon and other brands also had similar macro lenses to choose from. The macro lens could capture the details of the accessory well and highlight the creativity of the designer. In addition, you can also use a conventional lens with a close-up lens to shoot. For example, a NiSi close-up lens with a 70 - 200mm and 24 - 105mm lens can also achieve a shooting effect close to a macro lens to a certain extent. At the same time, like the 60-million-pel portrait focus dual camera configuration on the front of the Huawei nova 13 Pro, it could be used perfectly from 0.7x to 5x zoom. It could also be used for close-up shooting of accessories, and some mobile phone lenses could also achieve good results when shooting accessories, especially for some jewelry shooting scenes that were not particularly demanding or needed to be quickly shot. The mobile phone lens could provide a convenient way to shoot. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
What is the best lens for jewelry shooting?
When shooting jewelry, the macro lens was better. For example, the EF100mm f/2.8L Macro IS USM or the RF100mm f/2.8L Macro IS USM. When buying the first macro lens, you can also choose a lens with a focal length of 60mm, which can achieve a magnification of 0.5 times. If you have the financial ability, it is better to buy a macro lens that can shoot at a 1:1 ratio. In addition, a lens with a focal length of about 60mm could be installed not far from the subject to shoot, which was more suitable for shooting small items such as jewelry. The 18 - 55mm lens, which was commonly used in digital single-lens reflex cameras or mirrorless cameras, was more suitable for home photography and not suitable for shooting jewelry. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Quick Focus Shooting Technique
The fast-hand focus shooting technique is as follows: 1. ** Focus Mode Selection **: - Single-point focus was suitable for static scenes, and the focus point could be aimed at the main body. - Multi-point focus was suitable for situations where there were multiple objects in front of the lens. It could automatically identify and focus. - Continuous focus is suitable for shooting moving objects. It can continuously track and maintain focus. 2. [Use exposure compensation reasonably: This is an effective method to adjust the brightness of the screen.] It was very useful in backlighting or high-contrast scenes. For example, the exposure compensation value could be appropriately increased for indoor shooting to prevent the subject from being too dark; the exposure compensation value could be reduced for outdoor strong light to prevent the picture from being too bright, making the subject more prominent and the picture more balanced. 3. ** Pay attention to the composition and the stability of the phone **: The composition affects the beauty and expression of the picture. Observe the surrounding environment first and choose the appropriate shooting angle and composition method. At the same time, the stability of the phone was very important. The camera could be held with both hands, pressed against the wall, or fixed with a fixed stand to stabilize the image to avoid shaking and causing the image to be blurred. 4. ** Make good use of slow-motion effects **: Fast Hands provides a variety of special effects, among which slow-motion effects are more popular. If used properly, it could slow down the movement of objects in front of the camera, lengthen the wonderful moments, and give people a delicate impression. If used appropriately when shooting dynamic scenes, it could improve the video effect. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Which camera lens is better for shooting jewelry?
When shooting jewelry, macro lenses were more suitable, such as Canon's EF100mm f/2.8L MCROIS USM or RF100mm f/2.8L MCROIS USM lenses. Ordinary card camera lenses were difficult to meet the shooting needs, because the macro lens could capture the details of the jewelry well and highlight the creativity of the designer. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
What are the parameters of the best lens for shooting jewelry?
When shooting jewelry, the following lenses and their parameters are more suitable: - Canon's macro lens, such as the EF100mm f/2.8L Macro IS USM or the RF100mm f/2.8L Macro IS USM, could achieve close-up focus. It was suitable for shooting small objects such as jewelry with high image quality. - Standard lenses such as 50/1.2 or 1.4 could also be used for jewelry photography. - Baiwei head, such as the EF100/2.8USM Macro, Nikon 105mm macro lens, etc., their magnification was 1:1, which was higher than ordinary lenses, and the image quality was better. It was suitable for still life shooting of small objects. - Special lenses such as the Canon ts-e45/2.8 or ts-e90/2.8 can also be used for jewelry photography. - The Tenglong 90/2.8SP lens could also be used for jewelry shooting with a certain body configuration. - For the Nikon D70S body, you can choose the AF60mm f/2.8D Micro lens with a focal length of 60mm, which is relatively cheap and can increase the magnification by 0.5 times; the more expensive macro lens can achieve 1:1 size magnification. - In terms of camera settings, if you use the Nikon D800 to shoot the ring, you can use a 105mm f2.8 lens, the aperture setting is f25, the shutter speed is 1/100, the USB is 50, the focal length is 105mm, and the white balance is 5200K. Generally speaking, in terms of aperture, when shooting jewelry indoors, F11 was the best aperture for most lenses, and the image quality was relatively good. The sensitivity of the lens should not exceed 400, and the sensitivity of the lens should not exceed 100. It was more suitable to reduce noise and ensure the image quality. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
What are the parameters for the best lens for shooting jewelry?
When shooting jewelry, different lenses had different parameters. For example, Canon's EF100mm f/2.8L Macro IS USM or RF100mm f/2.8L Macro IS USM macro lens can be used for jewelry shooting; When choosing the D70S for the Nikon body, you can consider the standard lens 50/1.2 or 1.4, the Baiwei head EF100/2.8USM Macro, Canon TS-E45/2.8 or TS-E90/2.8. If you don't see the D70, you can choose the Tenglong 90/2.8SP, or you can also consider the AF60mm f/2.8D Micro. There was also the Nikon D800, which could use a 105mm f2.8 lens when shooting rings. When buying the first macro lens, you could choose a lens with a focal length of 60mm, and the more expensive macro lens could increase the full size (1:1). <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
What lens is suitable for shooting jewelry videos?
There were many lenses suitable for shooting jewelry. For example, a macro lens with a focal length of 60mm could be used for jewelry photography; Canon's macro lenses such as the ESF100/2.8USM Macro, ESF100mm f/2.8L Macro IS USM or RF100mm f/2.8L Macro IS USM were also suitable for jewelry photography. These macro lenses could capture the details of jewelry very well and highlight the creativity of the designer; In terms of shooting jewelry with Nikon cameras, the Nikon 105 lens could be used to shoot high-end jade jewelry necklaces and other jewelry. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
What are the ways to quickly focus the live jewelry lens?
The factors that affected the focusing speed of the lens were the type of focusing motor, light, number of focal points, focal length, and anti-shake system. The following methods can be used to achieve fast focus when broadcasting jewelry: - ** Focus motor **: If the lens is mainly used for video shooting, the linear motor has fast focusing speed and high focusing accuracy. It is suitable for dynamic shooting and video shooting that require fast focusing. The lens using this type of focus motor can help with fast focusing. - ** Light **: When shooting, the focus speed will be faster if there is enough light. When broadcasting jewelry, you should ensure that there is enough light to avoid slow focus speed due to insufficient light. - ** Focus point **: The more focus points there are, the more flexible and faster the focus system can lock onto the target. This advantage is even more obvious in complex scenes. You can choose such equipment or settings during the live broadcast. - ** Focus **: The longer the focal length, the slower the focusing speed. Especially at long distances and large apertures, the focusing system needs to be adjusted more accurately. When livestreaming jewelry, you can choose the appropriate focal length according to the actual scene to avoid the long focal length affecting the focusing speed. - ** Anti-shake System **: If you are holding a live broadcast in a low-light environment, the anti-shake system can reduce hand shake, which helps the focusing system to lock the focus faster and more accurately and improve the focusing speed. However, if you use a tripod to shoot steadily, the anti-shake system may increase the time the camera takes to process data, especially when the anti-shake function is activated. It will reduce the focusing speed of the lens. In this case, consider turning off the anti-shake function. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
What are the best types of camera shots for shooting jewelry?
When shooting jewelry, a macro lens was the most suitable type of lens. For example, Canon's EF100mm f/2.8L Macro IS USM or RF100mm f/2.8L Macro IS USM, Tamron 90/2.8SP, Nikon's AF60mm f/2.8D Micro, Canon's Baiwei head EF100/2.8USM Macro, etc. You can also choose a lens with a focal length of about 60mm. This lens can make the camera reach 0.5 times when it is not far from the subject. If conditions permit, it is better to buy a macro lens that can shoot at a 1:1 ratio. In addition, standard lenses such as 50/1.2 or 1.4 could also be used to shoot jewelry. Canon's TS-E45/2.8 or TS-E90/2.8 could also be considered. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>