Handmade model photography light source
For handmade model photography, here are some suggestions on light sources: - ** Everlasting Light **: If you want to shoot small still objects such as figurines, Naisijun recommended using soft and natural ever-bright lights. For example, the professional flat-panel lamp TL-150A, which had its own soft light effect and dual color temperature adjustment, was more suitable. Its LED lamp bead was the same batch of professional film and television light effect lamp beads. The brightness was enough for the camera. Many photography bloggers would also use it as a fill light when taking portraits. Moreover, it had the feature of dual power supply. When shooting outside or holding the light, it could be powered by a lithium battery (full power could support the maximum power for more than one hour). When indoors, it could be connected to the power cord for power supply. It could be used in a variety of scenarios. - [Radiography flashlight: Radiography flashlight is also a light source that can be used for model photography.] Different styling pieces could be used to create different light and shadow effects. For example, first use a small styling piece to cast shadows, then use other styling pieces to illuminate the main body, etc. When lighting, pay attention to the coordination of light and shadow to avoid interfering with other light and shadow effects. - ** Arrange the light source according to the characteristics of the model **: When shooting, arrange the light source according to the characteristics of the hand-made model, adjust the type, position, angle, etc. of the light source, so as to reduce the appearance of shadows, reflections, and halos. For example, for special models such as cultural relics, they would be placed in the center of the wheel, the camera would be fixed on the tripod and aimed at the cultural relics, the background would be monotonous, and then the light source would be arranged according to the characteristics of the cultural relics. Read more exciting novels for free
Aerospace Handmade Model
There were many types of aerospace handmade models. In terms of materials, there were simple cardboard, paper tubes, tape, watercolor pens, plasticine, etc., such as the activities in Jingxin Community on Huqiu Street, where teenagers used these materials to make aerospace models. There were also wooden materials, such as the Tiangong No. 2 handcraft class activity gift toy puzzle, the aerospace simulation model was a wooden 3D puzzle. There were also foam materials, such as hand-thrown foam aircraft children's toys, hand-made aerospace models. In terms of the main body of the production, there were aircraft models, such as the rubber band-powered indoor aircraft made by the Changde representative team in the Hunan Province Aerospace Model Championship; There were rocket models, such as handmade rocket production in the aerospace model production link of some public welfare lectures; There was also a space station model, a space station model made of steel by a Shandong guy. The appearance was realistic and could be disassembled and assembled. These aerospace handmade models could be used for a variety of purposes, such as showing the design and production process of the contestants in the competition, conducting aerospace knowledge education, and as children's educational toys. The novel " Hundred Years of Spaceship " is equally exciting. Everyone is welcome to click and read it!
Handmade Long March 5 model
The following is some information about the hand-made Long March 5 model: - Some space enthusiasts used A4 paper as all the materials to hand-make the Long March 5 launch vehicle model. - The following steps could be taken to create the same scale model of the Long March 5B launch vehicle in Minecraft: - [Main body construction: Make a circle on the ground to lay the foundation, then build up to the rocket head (no ceiling, do it later).] - [The fairing cap: After completing this step, the main rocket can be seen.] - Booster manufacturing: The Long March 5B rocket had four boosters, which were built near the main rocket. Their sizes had to be coordinated with the main rocket. First, one was built and installed, and the other three were manufactured in the same way. - The polishing of the rocket: After the main rocket and the thrusters were completed, a unique blue line was added, and the words "China Aerospace" were written on it. The Chinese flag was added, and a magma block was placed at the lower end of the rocket to simulate a flame spray. - There was also the "post-90s" space enthusiast Xing Guixian's self-made Long March 5 rocket and its launch tower model. The most difficult part of the production was to determine the scale of the model. Since there was no official data, they could only use a large number of pictures and videos for reference and comparison to deduce the size data of the tower. It took more than a month to find information to determine the model proportion. There were more than 1800 parts in the launch tower, most of which were hand-made and pieced together, requiring great patience and care. In addition, the teachers and students had also used beverage bottles to make the Long March 5 water rocket, but the attitude was unstable in the second time, and the core parachute opened too late, so it still needed to be improved. The novel "Hundred Years of Spaceship" is equally exciting. Everyone is welcome to click and read it!
The light source selection principle of clothing photography is
The selection of light sources for clothing photography should follow the following principles: ** 1. Principles of light usage in indoor studios ** 1. ** Principle of flexibility ** - The lighting in the indoor studio should be flexibly adjusted according to different performance targets and contents. Because the interior was less affected by external factors, the photographer could set and control the lighting, and the lighting had to be improvised. - For example, when it came to clothing photography, there was no fixed lighting standard. Different photographers had different lighting styles. The key was to be conducive to clothing expression and theme sublimation. 2. ** Grasp the characteristics of light and the principles of image tones ** - The light quality, light position, light ratio, light color, and the number of different light sources should be used reasonably. Commonly used lighting schemes included three-dimensional lighting, flat lighting, and many other methods. According to the characteristics of the clothing and the temperament of the model, the individual lighting scheme was selected. ** 2. Principle of Exterior-level Light Usage ** 1. ** Principle of combining natural light and artificial light ** - Exterior shooting was limited by natural light, so it was necessary to make full use of natural light and combine it with artificial light (such as photography lights) to supplement and correct it. Artificial light could help balance the light in the picture and play a role in complementing and correcting natural light. - For example, it was a good time to shoot night scenes when the lights were on and there was a residual light in the sky. Or when shooting clothes in an indoor environment with windows during the day, you could add light to the natural light. This was the use of mixed light. 2. ** Principle of coordination and balance ** - It was important to balance artificial light and natural light. The light ratio had to be controlled well, and the lighting arrangement was simple and practical. It should not be too complicated. In this way, the shape, color, and texture of the main body could be accurately expressed, making the main body stand out from the background or decorating the main body to create an atmosphere. ** 3. According to the principle of different shooting topics ** 1. ** Considering the characteristics of clothing ** - Different clothing materials, colors, and styles might require different light sources to show their characteristics. For example, some clothes with special texture might need a specific angle and light quality to highlight the texture. 2. ** Model considerations ** - If it was a combination of portrait and clothing, the model's skin color, temperament, and other factors had to be considered. For example, the color temperature of the light suitable for different skin colors may be different to achieve the purpose of better presenting the overall effect of the model and the clothing. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Ghost Blade Series Handmade Model
Ghost Blade was a series of illustrations created by a domestic original illustrator and manga artist, WLOP. It included a large number of exquisite character settings and scene descriptions. The Ghost Blade series of figurines were based on the physical models created by these illustrations. They were usually made of high-quality materials, with a high degree of realism and exquisite details. There were many types of Ghost Blade series figurines, including single-player models of the main characters Wind Chimes, Hai Qinyan, and Ice Princess, as well as multi-player models and scene models. These models were usually made of materials such as PVP and resin. They had a high degree of mobility and exquisite details, allowing players to better appreciate and collect the characters and scenes in the Ghost Sword series. While waiting for the anime, you can also click on the link below to read the classic original work of The King's Avatar!
Paper folding, handmade seaplane photography
If he wanted to take a paper-folding handmade seaplane photo, he first needed to make a paper-folding handmade seaplane. Here are the steps to make a simple handmade seaplane: 1. Fold the paper in half and repeat. 2. Open the paper and fold it down about 8cm at the edge. 3. Fold the two corners at the top to the position closest to it. 4. Unfold and fold the top corner of the concerton. 5. Fold the top flap to the center line. 6. He folded the paper in half. 7. Fold the peak as shown in the picture. 8. Finally, the two sides were folded to form wings. After the seaplane was made, they could take photos. When taking photos, you can choose a suitable background, such as water or blue sky and white clouds, to highlight the theme of the seaplane. At the same time, he could also adjust the light and angle to get a better shot. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Hotel model photography
The hotel was often used as a shooting location in photography. The following is some information about the hotel model photography: ** 1. Model Source and Recruitment ** 1. ** Recruit from the ordinary crowd ** - People like Cai Shan, who were not professional models, might be chosen by photography enthusiasts. For example, Cai Shan was working in a gold jewelry shop and was chosen by Pu Hua, a photography enthusiast, who invited her to be a model. Pu Hua liked Cai Shan's maturity, temperament, and good figure. He would also give him 1000 to 2000 yuan as a reward. 2. ** Professional model or related practitioners ** - Professional models would also participate in photography activities in the hotel. Some photography forums or photography fan organizations might contact professional models and arrange for them to take photos in hotels. For example, the Hummingbird Forum might have related hotel shooting activities, with models participating. - There were also private film models like Guo Huiming, who gradually began to become private film models because of their appearance and popularity in specific fields (such as cosplay). They might also be invited to take photos in hotels. ** 2. Scene and content ** 1. ** Hotel Scenery Unique Usage ** - In a luxury hotel, different scenes could create different ambiences. For example, the Bulgari Hotel had a unique architectural style in Beijing and Shanghai. The Bulgari Hotel in Shanghai was connected to the bungalow building of the Shanghai Chamber of Commerce. The view from the room was very good. You could see the scenery of Lujiazui and the Bund, making it a good background for photography. - The interior of the hotel rooms was also widely used, such as beds, terraces, and baths. Some shots would pile food on the bed, take breakfast to the bed, take photos on the balcony in the style of internet celebrities, and shoot scenes in the bathroom with models wearing bathrobes. 2. ** Shooting content type ** - For photography enthusiasts, the content of the shoot might be to participate in a photography competition or for personal collection. For example, the photos that Pu Hua invited Cai Shan to take would not be posted online unless they were for a photography competition. - There were also commercial shoots. For example, some Taobao models might shoot in hotels to display their products. ** 3. Problems and risks ** 1. ** Model's risk ** - There were safety risks. For example, Guo Huiming, a private model, might be in danger after accepting an invitation to shoot. She was teased and tortured by the photographer, and her body was wrapped in a plastic bag and dumped in a garbage station. This showed that some models might face threats from bad photographers when they accepted the hotel's private photo shoot invitation. - There were also situations where the model went against her will from normal shooting. For example, there might be situations where the model went against her will from normal shooting to nude shooting. 2. ** Business and ethical issues ** - There might be some unethical or bad business practices when filming in the hotel. For example, when socialites took photos in hotels, there were unsanitary behaviors (such as many people taking turns wearing bathrobes to take photos) and fake behaviors (such as photoshopping their faces to make them look unreal, piling up bags on the bed to pretend to be rich, etc.). <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Model photography lighting
The following are some common lighting methods for model photography: 1. Butterfly Light (Paramount Light): - [Effect: It can achieve the effect of slimming the face. There will be a butterfly-shaped symmetrical shadow under the nose, which is a relatively beautiful and likable light.] - Light position setting: Place the light source above the model and point it at the model's cheeks, creating a dramatic shadow under the nose and chin. 2. Ring Light: - [Effect: The light effect created can be flat or narrow.] - Light position arrangement: Starting from the position of the butterfly light, the position of the light should be high enough to cast a perfect arc shadow under the cheekbone. Then, the light source should be moved slightly to the right or left to change the position of the light source until the shadow appears on the other side of the nose, forming a ring. 3. ** Rembrandt Light (Triangular Light)**: - [Effect: The transition is natural and smooth. The most important feature is the "triangle on the cheek." The picture looks both dramatic and natural.] - Light position arrangement: push the light slightly forward to the right or left of the ring light setting, and point the light at a steeper angle. When shooting, the shadow side of the subject's face is facing the camera. Use a light source and a reflective light source, or two separate light sources, to form a triangular light spot on the front part of the face (the projection of the brow bone and nose bridge, and the dark area of the cheekbone). 4. Split Light (Side Light): - [Effect: Easy to achieve indoors. It is suitable for creating a mysterious atmosphere. The scene will show a strong drama, showing the character's personality and temperament.] - Light position arrangement: The main light only illuminated half of the subject's face (the side of the subject, left in the shadows). 5. ** Edge Light **: - Effect: It is very suitable for separating the subject from the background and accentuating the outline. - Light position: Place a light source behind the subject and tilt it toward the back of the head. This auxiliary light source should be stronger than the main light source from the front to get more drama. 6. ** Revealing Light **: - [Effect: Prominent model's wide face.] - Light positioning: Turn the side that receives the light to the camera, or place the light source on the right or left side of the subject and tilt it towards her, and let the model move away from the light source and face the camera. 7. ** Skinny Light **: - [Effect: Makes the face look sharp and has a more three-dimensional feel.] - Light position arrangement: It was the opposite of the wide-light. After the wide-light photo was completed, the light source could be moved to the other side of the model. The model could also turn her body to the side of the light source and push the wide side of the face into the shadow. 8. ** Silhouette Light **: - [Effect: It is suitable for models who ignore the appearance of the model and pursue the outline of the body. It is suitable for models with three-dimensional facial features.] - Shooting method: Let the light part be exposed normally, and the natural dark part be exposed to black. 9. Backlight: - [Effect: It can create a hazy feeling. It is more effective for women.] - [Shooting requirements: It needs to be used with a reflective board, otherwise it will look like a silhouette shot.] 10. Narrow Light: - [Effect: The light can only be displayed at the edge of the model's face. When used with a reflective board, it can reflect a sense of mystery and concentration.] - Light position arrangement: The light position is behind the model. 11. [Contour Light]: - [Effect: Create a solemn and mysterious feeling, highlight the model's focused eyes, suitable for models with three-dimensional facial features.] - Light position arrangement: You can use it as a character's decorative light and place it behind the subject to make the hair have a high level of light, so that the face has a very good outline. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Fake model for photography
There were many uses for fake models in photography. In some product shoots, such as women's down jackets, 3D fake models would be used to show the details of the clothes. There were also cases where the cotton jacket was laid flat and hung up. In indoor photography scenes, fake models could be used to display clothing and accessories. For example, indoor models could wear necklaces, leather shoes, etc. for photography, which made it convenient for photographers to shoot from different angles to obtain the ideal image effect. Fake models could also be used for some styling. For example, hairstylists could adjust fake models wearing fake fur jackets to show hairdressing effects. In addition, there were also isolated mannequins and other fake mannequins that could be used for specific photography needs. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Model private photography
Private photography was a one-on-one method between the customer and the photographer. In a limited space, using indoor lighting, professional lighting, indoor environment, clothing, and other means to achieve some artistic effects that the studio could not achieve. For a model's private photography, there were the following points: ** I. Pre-shooting preparation and communication ** 1. ** Shooting style and costume ** - You have to be clear about the style you want to shoot, because clothing is related to style and often determines the scale of the shoot. Even if it was the same style, different clothing matching standards might be different, so it was necessary to ensure that it was a standard that he could accept. - Before shooting, it was necessary to determine whether the photographer was allowed to increase or decrease the clothing during the shooting process to avoid situations where the scale was beyond their own tolerance or the photographer had selfish motives. 2. ** Shooting location ** - There were studios, homestays, hotels, and so on. It was very important to determine the venue. It was related to privacy and security. - If the shooting was in a hotel or homestay, the check-in information of the people present should be registered as required. This would help to find the information of the people in case of disputes. 3. ** Number of Filming Teams ** - The model had the right to know the number and composition of the filming team. The normal team included photographers, makeup artists, lighting engineers, assistants, and so on. - Due to the high privacy of private photography, models could make requests according to their own situation, such as reducing the number of people or asking for their friends or makeup artists to be present to ensure safety or avoid embarrassment. 4. ** Usage and agreement of the filming results ** - If it was a paid photo shoot, the ownership and usage rights of the photos should belong to the model. If both parties exempted each other from creation, the results of the shoot would usually be shared by both parties, but the model could make additional requests. If the photographer or photography studio paid the model to take the photos, the photos belonged to the photographer or studio, and the model could not restrict the use of the photos. ** 2. Points to note during filming ** 1. ** Postures adjustment and body touch ** - Normally, the photographer wouldn't touch the model when adjusting his posture, but there were exceptions. If the model did not like to be touched, they had to explain to the photographer before the shoot. When adjusting the posture, the photographer would guide them verbally and complete the adjustment by themselves. 2. ** Watching the original film on the spot ** - There would be a break to adjust during normal shooting, and the model could request to review the results of the photographer's camera during this period. - Looking back at the original film could determine whether the shooting had achieved the feeling he wanted, and it could also prevent the photographer from shooting at a bad angle. If there was a problem, he could ask for a change of photographer or stop shooting. ** 3. In terms of legal risks ** If it involved the spread and profit of private photography, there might be legal risks. For example, in the case of a dispute over the use of the filming results, such as the model and the photographer having a verbal agreement to allow the distribution of the work, but the model regrets and has a dispute after seeing that the photographer has made a lot of profits, if the work disseminated by the photographer is judged to have illegal acts such as the distribution of obscene articles for profit,(Even if the photos have been processed, there may still be risks if the content is suspected of obscenity), they will face legal penalties. The photographer may face more than three years in prison. Regardless of whether the source of profit is domestic or foreign, as long as the act of spreading occurs in China, it may be subject to Chinese law. ** 4. Techniques related to photography (lighting, etc.)** 1. ** Light Source Type ** - There were direct light (hard light) and scattered light (soft light). 2. ** Character Facing Direction and Light Manipulation ** - There was no need to fill in the light, but one had to pay attention to the intensity of the outdoor light to avoid the contrast being too high and affecting the aesthetic style of the indoor portrait. - Side light may need to be supplemented when the light is strong (direct light, hard light). You can use a reflective plate to avoid the face of Yin Yang. - Backlighting was common in private photography. One had to pay attention to the use of fill light and silhouettes on the model. The common method was to overexpose the background to create a beautiful effect. 3. ** Light Effect Type ** - Intertwined light and dark: The distance between the light source and the subject, angle, strength, and the distance between the photographer and the subject will produce this effect, which can make the picture have a three-dimensional sense. - Over-exposure type: Over-exposure of the background can form light bands on both sides of the character to outline the lines, shape the body, and highlight the main body and remove the complicated background. - [Beautiful sugar water type: The overall picture is bright and fresh. The style is sweet and full of life. It is accepted by many women.] <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Sweat of a photography model
In a shooting scene, there were many situations where a model would sweat. For example, in some portrait photography works, the model was placed in a hot environment, such as a hot forest. The sweat on the body could bring a special feeling to the picture, reminiscent of a hot summer afternoon. At the same time, it could also evoke the memories of the viewer's childhood summer time. Also, when shooting in hot and humid weather, models and photographers might sweat. For example, during the Qipao show in the ancient street of Changle Second and Third Village, the models 'faces were covered in sweat, and the photographers were drenched in sweat. When shooting portraits in ruins, the weather was hot and humid, and the photographers' clothes were soaked, even though some models looked calm and did not complain. Sweat could be used as an element in photography to convey a specific atmosphere and emotion. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>