Handmade Long March 5 model
The following is some information about the hand-made Long March 5 model: - Some space enthusiasts used A4 paper as all the materials to hand-make the Long March 5 launch vehicle model. - The following steps could be taken to create the same scale model of the Long March 5B launch vehicle in Minecraft: - [Main body construction: Make a circle on the ground to lay the foundation, then build up to the rocket head (no ceiling, do it later).] - [The fairing cap: After completing this step, the main rocket can be seen.] - Booster manufacturing: The Long March 5B rocket had four boosters, which were built near the main rocket. Their sizes had to be coordinated with the main rocket. First, one was built and installed, and the other three were manufactured in the same way. - The polishing of the rocket: After the main rocket and the thrusters were completed, a unique blue line was added, and the words "China Aerospace" were written on it. The Chinese flag was added, and a magma block was placed at the lower end of the rocket to simulate a flame spray. - There was also the "post-90s" space enthusiast Xing Guixian's self-made Long March 5 rocket and its launch tower model. The most difficult part of the production was to determine the scale of the model. Since there was no official data, they could only use a large number of pictures and videos for reference and comparison to deduce the size data of the tower. It took more than a month to find information to determine the model proportion. There were more than 1800 parts in the launch tower, most of which were hand-made and pieced together, requiring great patience and care. In addition, the teachers and students had also used beverage bottles to make the Long March 5 water rocket, but the attitude was unstable in the second time, and the core parachute opened too late, so it still needed to be improved. The novel "Hundred Years of Spaceship" is equally exciting. Everyone is welcome to click and read it!
Long March 5 Model Introduction
There was a model of the Long March 5 launch vehicle launched by the Keeppley brand. This model was a genuine authorized product of China Aerospace, and it performed well in terms of proportion and details. The alloy model had a ratio of 1:150. It was a two-and-a-half-stage rocket with four boosters. It could reflect some of the characteristics of the Long March 5 rocket and could be used as an item for aerospace science or collection. It was currently sold in the 3600-yuan store. The original price was 199 yuan, and you could enjoy a 15% discount if you placed an order. The actual starting price was 169.2 yuan. The novel " Hundred Years of Spaceship " is equally exciting. Everyone is welcome to click and read it!
Long March 5 Rocket Model Introduction
There was a model of the Keeppley brand Long March 5 launch vehicle, which was a genuine authorized product of China Aerospace. It performed well in terms of proportion and details, and was the star product of the brand's aerospace series. The price was 199 yuan in Jingdong Mall, and you could enjoy a 15% discount if you placed an order. The actual starting price was 169.2 yuan. The novel " Hundred Years of Spaceship " is equally exciting. Everyone is welcome to click and read it!
Where is the Long March 5 rocket model?
You can buy the genuine and authorized Long March 5 rocket assembly model at the 360buy store. The price is 199 yuan, and you can enjoy a 15% discount when you place an order. The actual starting price is 169.2 yuan. The novel " Hundred Years of Spaceship " is equally exciting. Everyone is welcome to click and read it!
Long March 5 rocket model production process
The process of making the Long March 5 rocket model was as follows: 1. [Material preparation: White cardboard, scissors, glue, transparent tape, black thread, silver spray paint, red spray paint, yellow spray paint, blue spray paint, black spray paint, paintbrush, and other materials.] 2. Making the rocket body: According to the shape of the Long March 5 rocket, cut the white cardboard into the corresponding shape, and then glue them together to make the rocket body. In the process of fusing, one had to pay attention to the position and proportion of the various parts of the rocket to ensure that the shape of the model was similar to the real thing. 3. To make the rocket engine, first cut out the shape of the engine with white cardboard, then glue it with transparent tape, and then outline the details of the engine with black thin lines to increase the realism. 4. Painting: First, the entire rocket was painted with silver paint to increase the brightness and saturation of the subsequent colors. Then, the rocket was painted with red, yellow, blue, and black paint to make it more realistic. 5. To make the base of the rocket, use white cardboard to cut out the shape of the base and glue it with transparent tape. Then use black thin lines to outline the details of the base to increase the realism. 6. Complete the model: fix the rocket body and engine on the base. Pay attention to the position and angle of the rocket to ensure that it is similar to the real thing. The novel " Hundred Years of Spaceship " is equally exciting. Everyone is welcome to click and read it!
Ghost Blade Series Handmade Model
Ghost Blade was a series of illustrations created by a domestic original illustrator and manga artist, WLOP. It included a large number of exquisite character settings and scene descriptions. The Ghost Blade series of figurines were based on the physical models created by these illustrations. They were usually made of high-quality materials, with a high degree of realism and exquisite details. There were many types of Ghost Blade series figurines, including single-player models of the main characters Wind Chimes, Hai Qinyan, and Ice Princess, as well as multi-player models and scene models. These models were usually made of materials such as PVP and resin. They had a high degree of mobility and exquisite details, allowing players to better appreciate and collect the characters and scenes in the Ghost Sword series. While waiting for the anime, you can also click on the link below to read the classic original work of The King's Avatar!
Handmade airplane model for primary school students
The following are some methods suitable for primary school students to make handmade airplane models: ** 1. Method of making disposable chopstick airplane model ** 1. ** Material preparation ** - A pair of chopsticks, a bamboo skewer, scissors, 502 glue, a utility knife, 80#and 240#sandpaper. 2. ** Production Steps ** - He first stuck the seven chopsticks together, then shaved one end, rounded it, and cut it into a shape of about 45° (the angle did not have to be too precise). Then, he arranged them one by one. He made two of these parts in the same way. After that, he used 80#sandpaper to polish the two parts so that their angles were the same as much as possible. Then, he used 240#sandpaper to further polish them to make them smoother. Then, he made three similar parts at about 45 degrees, stuck a chopstick on one of them, and then glued all the parts together. After that, he made a base plate and chopsticks to support it. After that, he stuck a bamboo stick on the tail, and the plane model was completed. ** 2. Other general ideas for making simple handmade airplane models ** 1. ** Understanding the basic structure ** - An airplane model usually had a body, wings, tail, and other parts. The main body of the plane was the body that connected the other parts. The wings could provide lift, allowing the plane to fly in the air. Its shape and size would affect the flight performance of the plane. The tail consists of a horizontal tail and a vertical tail. The horizontal tail helps to control the pitch of the aircraft (raising and lowering), while the vertical tail controls the direction of the aircraft (turning left and right). 2. ** Materials and Tools ** - The materials could be easily obtained paper (such as A4 paper), light wood, foam board, etc. In terms of tools, scissors were necessary for cutting materials; if light wood chips or foam boards were used, a utility knife might be needed for more precise cutting; glue (such as white rubber, hot melt glue, etc.) was used to stick parts; in addition, a pencil and ruler could be used to draw sketches and measure size. 3. ** Production process example (paper airplane model as an example)** - First, use A4 paper to make the body. He placed the paper vertically, starting from one end of the paper, and folded it up a small section to form the head of the plane. Then, he rolled the paper down along the long side of the paper to a suitable width, and folded the rest of the paper toward the body of the plane to form the tail of the plane. Next, he made the wings. He cut out two identical ladders from another piece of paper. The long side of the ladder was the leading edge of the wing, and the short side was the trailing edge. He stuck the wings to a suitable position on the body, usually at the back of the middle of the body. Finally, he made the tail. He cut out a small horizontal tail and a vertical tail and pasted them on the tail of the body. When making handmade aircraft models, primary school students should pay attention to safety. For example, when using scissors and utility knives, they should be careful to avoid injury. If glue is used, it should also be prevented from getting the glue on the eyes or skin. The novel "Hundred Years of Spaceship" is equally exciting. Everyone is welcome to click and read it!
Long March 9 2021
On June 24,2021, Academician Long Lehao, an aerospace expert, announced the latest version of Long March 9 at a speech in Hong Kong. The Long March 9 "2021 version"(referred to as the "21 version") was larger than the "11 version" core class, with greater thrust and carrying capacity. It could meet the needs of large-scale manned flights in the future. The biggest difference between the "21 version" and the "11 version" was the removal of the thrusters. This change was to reduce its weight while increasing its carrying capacity. "Version 21" Long March 9 replaced the four YF - 130 engines with a single thrust of 480 tons with 16 YF - 135 liquid oxygen kerosene engines with a single thrust of 350 tons. This not only made the thrust nearly 6000 tons, but also reduced the weight of the thrusters by 15 tons. The design height of the "21 edition" Long March 9 was 108 meters, the diameter of the first and second cores increased from 9.5 meters to 10.6 meters, and the diameter of the fairing increased to 9.5 meters. Its main engine was 16 YF - 135 high-pressure liquid oxygen kerosene engines that were being planned. The thrust of a single chamber was 360 tons, 120 tons higher than that of the YF - 130. Although the "21 version" and "11 version" had a take-off thrust of about 5800 tons, the "21 version" had a greater thrust in the second and third stages. The second stage used four 120-ton 120tHo hydrogen oxygen engines, which increased the thrust by 40 tons. The third stage used a 120-ton 120tHo hydrogen oxygen engine, which increased the thrust by 20 tons. The 21st version of Long March 9 saved the dry weight of four 15-ton boosters, increasing the carrying capacity to 150 tons. The novel "Hundred Years of Spaceship" is equally exciting. Everyone is welcome to click and read it!
Long March 11
The Long March 11 had a capacity of 0.7 tons in low-Earth orbit, 0.5 tons in 500-kilometer sun-synchronous orbit, and 0.4 tons in 700-kilometer sun-synchronous orbit. The novel " Hundred Years of Spaceship " is equally exciting. Everyone is welcome to click and read it!
Long March 30,000 Miles
" 30,000 Miles in Chang 'an " was a national style animated film produced by Chasing Light Animation. Warren Xie and Zou Jing were the directors. The movie was set in the prosperous Tang Dynasty and told the story of Chang 'an falling into chaos after the An Lushan Rebellion. The main characters included Li Bai and Gao Shi. Their stories showed the beauty and glory of the Tang Dynasty. The poems in the movie were a precious heritage of ancient culture. They were presented through animation and resonated with the audience. In addition, the music in the movie ingeniously incorporated the elements of classical poetry, making the audience feel as if they had traveled through time and space and felt the voices of the ancients. By telling the story of Gao Shi and Li Bai," 30,000 Li in Chang 'an " showed the persistence and hardship of the Tang Dynasty poets in the process of pursuing their ideals and dreams. After the movie was released, it achieved good box office results and became the answer sheet for the tenth anniversary of Chasing Light Animation.
Reborn on the Long March
There were a few novels about being reborn on the Red Army's Long March that were worth recommending. Among them," Long March: 1934-1936 " was a detailed description of the classic battles that the China Red Army experienced on the Long March. In addition, the Red Army is not afraid of the difficulties of the expedition, Ballad of the Long March, Morning Sun Flower, and Red Streamer of the Earth were also novels about the Long March. In addition, Dreaming of Sword was also a possible choice. It told the story of the protagonist traveling back to 1927 in his dream, looking for Li Yunlong, and joining the Red Army with the commander. I hope these recommendations will meet your needs.