Making Method of Curtain
The following was a common method of making curtains: 1. * * Confirm Curtain Style and Dimension **: - In terms of appearance, the curtain could be divided into a hanging wave curtain and a balloon curtain, and from whether there were folds or not, it could be divided into a pleated curtain and a flat curtain. After determining the style, the width and height of the curtain should be determined according to the size of the window. Generally, the height of the window curtain and the curtain head should be multiplied by 0.17 for the best ratio. 2. * * Calculating fabric usage **: - If it was a curtain with folds (like a wavy curtain with three folds), multiply the fold by the width of the curtain head. For a flat curtain, the number of folds is 1 (i.e. no folds). The width was usually rounded up to an entire number, and then multiplied by the height of the curtain head plus the length of the edge (for example, the curtain head was 20 cm high, and the edge was 20 cm, the total length was 40 cm or 0.4 meters. Multiply this value by the value obtained previously to obtain the amount of fabric used for the curtain head). 3. * * Tailored fabric **: - The pleating tape was pre-pleated to the width of the finished curtain. The two ends of the pleating belt were left unpleated, one end of which was used for overlapping, and the other end was used for the turning of the curtain rod. - Hang the pleating belt on the installed bar, adjust the position of the pleats, and fold both ends 1.3 cm inward. Then remove the pleating hook and cut out each curtain based on the pleating belt. 4. * * Edge processing **: - The lower edge and the two sides were folded inwards and sewed together. He made a mark on the front of the curtain 1.3 centimeters away from the upper edge. - With the pocket facing up, pin the upper edge of the pleating tape along the curtain marking line, so that the pleating tape and the curtain overlap by 1.3 cm, and the edge of the pleating tape is sewn 6 mm away. - Fold the pleating tape inside the curtain so that it is aligned with the upper edge of the finished curtain and iron it flat. If marked, sew the lower edge and both sides of the pleating belt according to the indicated lines on the pleating belt. 5. * * Plucking Hook **: - insert the pleating hooks completely into the folds and adjust the folds between the pleating hooks. While waiting for the TV series, he could also read the exciting content related to this site!
Weaving method of bamboo curtain
The weaving of the bamboo curtain had the following steps: first, the bamboo was scraped off. The green bamboo on the bamboo was scraped off to unify the color. The scraped bamboo was dried for about a week, and then split into small bamboo strips of uniform specifications (a bamboo usually broke seven or eight times). After that, they entered the weaving process. With the bamboo strips as the wefts and the red rope as the warps, they first drew marks and then weaved from small to large. Usually, the yarn was weaved in 33 steps, and a bamboo strip had to be weaved 66 times. It was more difficult to weave to the part with flowers, and it required both hands to be skilled in weaving. During the weaving process, they had to pay attention to the coordination of their hands and the flexible use of their fingers to avoid getting entangled with the yarn ball. After the bamboo curtain was woven, the two sides had to be trimmed flat with scissors, then sewn with cloth, and finally dried with tung oil. In addition, the bamboo weaving technique also included flat-woven bottom warp and woof bamboo strips with one pick and one up and one down, leaving no gaps (this was the most widely used weaving method), as well as four-corner hole woven bottom warp and woof bamboo strips with one pick and one press and one up and one down, arranged in parallel at equal distances, leaving square holes and other weaving methods can also be used as reference. While waiting for the TV series, he could also read the exciting content related to this site!
The application method of rolling bead curtain
Rolling bead curtains had different applications in different fields: - In terms of music, you can use the vertical flute to play "Rolling Pearl Curtain." When playing, you have to focus on the simplified musical score, memorize the musical score, use emotion to drive the strength of the breath, and integrate emotion into the performance. You can also use the faucet as a musical instrument to play "Rolling Beaded Curtain". - In terms of decoration, the bead curtain could be used as a wall decoration. Glass or mirrors could be installed on the wall first, and then the bead curtain could be hung to ease the cold and hard feeling of the wall. - In terms of knitting clothing, there was a method of knitting an unsymmetrical hollowed-out flower pullover with a rolled bead curtain. For example, 24 needles were picked on both sides of the front collar, and then the needles were reduced according to the pattern. The front and back were connected to the pattern of the big body. While waiting for the TV series, he could also read the exciting content related to this site!
Method for making sandwich
The method of making the sandwich was very simple. First, he mixed the flour and water into a dough, added a small amount of oil and salt, kneaded it into a smooth dough, and then left it to ferment. After the fermentation was completed, the dough was divided into small pieces, rolled into a thin round skin, and brushed with a layer of oil. Then, he stacked the two sheets of dough together, pressed them gently with his hands, and cut them in half with a knife to form a pocket-shaped scone. He placed the scones into the hot pot and fried them on a low heat until both sides were golden yellow. He used chopsticks to separate the two dough sheets and took them out for later use. Then, he could choose various ingredients according to his personal preferences, such as mutton skewers, chicken skewers, shredded potatoes, etc., and fry them until they were cooked. Finally, he placed the seasoning and seasoning into a small bowl and mixed them well. After spreading the scones with seasoning and seasoning, and then adding the fried ingredients, they could enjoy the delicious pancakes.
Method for making spicy slices
There were many ways to make spicy slices. The following steps could be summarized: 1. Prepare ingredients: tofu skin, chili powder, cumin powder, white sesame, salt, vegetable oil, etc. 2. He placed the chili powder, cumin powder, white sesame seeds, and salt into a large soup bowl and stirred them evenly. 3. He heated the oil and placed the condiments other than the chili powder into the pot to fry. 4. He poured the hot oil on the chili powder, added the sesame seeds and chicken essence, and stirred them evenly. 5. He spread the chili oil evenly on the bean skin. These steps were summarized based on the relevant information provided in the search results. Please note that these steps may not be the only way to make it. It can also be adjusted according to personal taste and preferences.
Method for making waxberry wine
There were many ways to make waxberry wine. The following steps could be summarized: 1. Prepare the waxberries: Remove the leaves and stems of the fresh waxberries, soak them in salt water for 15 minutes, then wash them with water and dry them. 2. Prepare the container: Choose a clean glass bottle or jar and rinse it with a high-intensity white wine to disinfect it. 3. Adding rock sugar: According to the taste of the individual, rock sugar can be added in an appropriate amount. It was generally recommended to arrange them in the order of a layer of red berries and a layer of rock sugar. 4. " Pouring white wine: Place the dried waxberries into a container, then pour in white wine. The height of the white wine must be able to submerge the waxberries and be more than two centimeters high. 5. Sealing and storage: tighten the lid of the container, seal it properly, and then place the bottle in a cool and well-vented place. 6. Shaking and brewing: shake the bottle every three days. After brewing for 15-25 days, you can drink it. 7. Chilling and Enjoying: You can chill it before drinking it to make it taste better. It should be noted that there may be subtle differences in different production methods, such as soaking time, amount of rock sugar, etc. In addition, the formula could be adjusted according to personal taste.
Method for making bamboo man
The method of making bamboo people was as follows: First, prepare a thick bamboo and some tools, such as saws, knives, sandpaper, rulers, etc. He chose a piece of bamboo with a higher degree of aging and a harder texture. This way, the bamboo people he made would be stronger and more durable. Then, he used a saw to cut the bamboo into sections of appropriate length, each section about 10-15 cm long. Next, use a knife or sandpaper to polish the two ends of the bamboo section, and use a ruler to ensure that the length and width of each bamboo section are the same. He drilled a hole in the middle of each bamboo section, then inserted a small bamboo section as a joint, and fixed the joint with glue or bamboo nails. Assembling all the bamboo sections together to form a body shape, and using glue or rope to fix them together. Finally, he added details as needed, such as hands, feet, and head. You can use a knife or carving tool to carve details on the bamboo section, or you can use paint or colored tape to decorate it.
Method for making rose essence
There were several methods to make rose essence: - ** Distillation Method **: - Soak the washed organic rose petals in high-alcohol vodka, seal them in a glass bottle, and place them in a cool and dry place for 2 - 3 days to let the fragrance and color of the roses seep into the wine. Then filter the petals, pour the liquid into the pan, and put it in the oven at 50 degrees Celsius (about 120 degrees Celsius) to slowly evaporate the alcohol until the rose essential oil was left. - Rose petals could also be extracted by the method of sublimation. Although the oil yield of this method was low, it could guarantee the pure vitality of rose essential oil. 10 kilograms of rose petals could produce about 1 gram of rose essential oil. The flower farmers would pick the flowers at 4 am to ensure that the essential oil content was higher. They would send the flowers to the factory for sublimation within two hours of harvesting. The extraction of the essential oil would not destroy the active ingredients in the rose. - ** Solvent-extraction method **: Soak the rose petals in a kind of solution (such as hexane or ether), and then use low-temperature or vacuum extraction to separate the solution and rose oil. This method produces a substance called rose alcohol, which is a viscous liquid that contains the fragrance and color of roses. - ** Fat Aspiration Method **:(The reference material did not mention the specific operation, so it cannot be described in detail) - Steam Distillation Method: High-pressure steam is used to separate the rose oil from water through a boiler with rose petals. This method produces an essential oil called rose oto or rose alcohol. - ** Simple preparation method **: Wash 100 grams of rose flowers to remove water, place them in a clay pot or porcelain pot and boil them over low heat. Stop the fire before they boil. At the same time, stir them with chopsticks and observe them. After cooling down, move them to other containers. Cover them with plastic wrap and place them at room temperature for 2 days to fully extract the components of the flowers. After filtering the flowers, you can make 50ml of rose water. After filtering with gauze, you can do it. "Rose Fragrance Shadow: The Story of Sweetheart's Growth" was equally exciting. Everyone was welcome to click and read it!
The Making Method of Crow Headwear
Here are a few ways to make crow headwear: Method 1: 1. Prepare materials: black, white, red cardboard, scissors, glue or double-sided tape, pencil, ruler. 2. The basic shape of the headgear: cut out a rectangular shape with black cardboard. Its length should be able to circle around the head, and its width should be determined by the size of the head. Fold the rectangular shape in half and glue the two ends together with glue or double-sided tape to form a cylinder. 3. To make the crow's head, cut a circle out of white cardboard for the head, and then cut two small triangular-shaped mouths out of black cardboard. Stick the mouths under the head. 4. To make the crow's eyes, cut two small circles out of red cardboard and stick them on both sides of the head. 5. To make the crow's wings, cut out two large triangular-shaped pieces of black cardboard and stick them on both sides of the cylinder. 6. Make a crow's tail: Cut out a long strip of black cardboard and stick it to the bottom of the cylinder. 7. Finally, he put the crow headdress on his head and adjusted its position. Method 2: 1. He prepared black cardboard, scissors, glue, and a rubber band. 2. He cut the cardboard into two big circles and two small circles to form the crow's head and eyes respectively. He cut out two triangular shapes to form the ears, and then cut out two small mouths and four small claws. 3. He used glue to join all the parts together, making the crow look complete. 4. He left a piece of cardboard behind his head and secured it with a rubber band. Method 3: 1. Prepare the black and white cardboard, cut out a strip about 30 cm long and 5 cm wide as the headband. 2. He folded the black cardboard into a rectangular template and cut out two bird wings. 3. He cut out two small circles on the white cardboard as eyes, and then cut out two shapes similar to human eyebrows as thick eyebrows. 4. He stuck the eyes and eyebrows on the bird's wings, and then stuck the wings on both sides of the headband with tape. 5. He put the headband on his head and used the shape of the thick eyebrows to join the two wings of the cardboard with the eyebrows. Method 4: 1. He prepared black cardboard, silver cardboard, and white cardboard. He measured the appropriate length according to the size of his head, cut the black cardboard into a strip of the same width, wrapped it around his head, and fixed it with glue. 2. He cut the white cardboard into the shape of a wing, and then cut out an eye from a silver cardboard. 3. The wings and eyes were glued to the headdress. Finally, they were cut into a triangle with black cardboard and glued to the top of the headdress. "The Crow's Testimony" is equally exciting. Everyone is welcome to read it!
Method for making rose soap
A simpler method of making rose soap was as follows: First, he prepared the ingredients. He needed 50 grams of soap base, rose essential oil, food coloring, dried roses, and a stirring rod. 1. After cutting the soap base into small pieces, he placed them into a stainless steel cup. 2. He placed the stainless steel cup filled with soap base into a pot filled with an appropriate amount of water and heated it while stirring slowly until the soap base melted into a liquid. 3. Drop a few drops of food coloring into the melted soap base to bring out your favorite color, then add rose essential oil (usually two drops of 50g soap base). 4. He sprinkled rose petals into the soap base, stirred them evenly, and poured them into a small crisper. There was also a typical method of making cold soap. First, the solid grease was heated to melt, then cooled to about 40 degrees Celsius. After mixing it with the soda water, it was subjected to a soap reaction. After the soap reaction was completed, various impurities were added (rose-related impurities could be added here). Then, it was placed in a mold, and then it was removed from the mold. After cutting, it was ready to dry. During the production process, it was necessary to pay attention to the high temperature and corrosiveness of the water. Therefore, rubber gloves should be worn. It was best to wear a mask and use a stainless steel container. Soap bases could be bought in some shops that sold handmade soaps, and food coloring could be found in wholesale markets. "Rose Fragrance Shadow: The Story of Sweetheart's Growth" was equally exciting. Everyone was welcome to click and read it!
The method of making silk cheongsam
The silk cheongsam was made as follows: 1. * * Tailoring ** - Make sure the front and back of the material are stacked inside, and paint with powder lines on the back. Do not use dark powder on light-colored materials. - He confirmed the folding line of the material. Since there was no seam in the front and back of the qipao, he could fold the fabric to the width of the body. - Confirm the direction of the pattern on the material, and ensure that the pattern on the clothes, sleeves, and collars are in the same direction. - When cutting the velvet fabric, make sure that the plush of each piece of clothing is the same to prevent color difference. - When cutting, add an appropriate amount of seams and welts to the outline. For example, it takes 1.5cm to fit an ordinary zipper and 1cm to fit an invisible zipper. There are also different requirements for hemming and hemming. - Check the quantity and quality of the fabric and lining pieces, such as checking whether there are any mistakes in the front and back of the right lapel. 2. * * Sewing ** - The clothes were pulled out. - the side seams are attached with tie strips. The novel "Dream of Silk Fate" is equally exciting. Everyone is welcome to click and read it!