webnovel
What is the reason why sulfuric acid and gold and silver react without heating?

What is the reason why sulfuric acid and gold and silver react without heating?

2026-11-19 23:49
1 answer

The reason why diluted sulfuric acid could not react with gold was because gold was located after hydrogen in the metal activity sequence. Gold was not as active as hydrogen, so it could not replace hydrogen from its compound solution. Silver did not react with diluted sulfuric acid at room temperature because of the metal activity sequence. Silver was not active enough to react with diluted sulfuric acid. There was no need to heat it up because it was based on the basic chemical principle of the metal's mobility order. It had nothing to do with heating it up or not. The reason why sulfuric acid could react with silver under heating conditions was because concentrated sulfuric acid had strong oxidization, which was a different reaction mechanism from diluted sulfuric acid. Read more exciting novels for free

Copper and silver react first with sulfuric acid

From the metal activity sequence table, it could be seen that copper was more active than silver. Nitric acid was a strong oxidistic acid, and it would react with metals with strong reducing properties first, which meant that it would react with copper first. Moreover, if silver reacted first to form silver nitrates, copper could reduce silver nitrates to silver and form copper nitrates. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>

1 answer
2026-07-01 09:31

How to write the heating equation for the reaction of sulfuric acid and sulfuric acid?

There was no reaction between the two, so there was no reaction equation. Because the metathesis reaction must produce water, gas, or precipitations, the reaction of sulfuric acid and sulfuric acid did not meet the conditions of the metathesis reaction, so it could not react. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>

1 answer
2026-08-18 02:04

How to write the equation for the heating reaction of sulfuric acid and sulfuric acid?

The reaction was more complicated when the mixture was heated. In addition to the formation of oxided products such as phenodinone, due to the dehydration and water absorption of hot concentrated sulfuric acid, a water molecules would be removed from the molecules to form substances such as diphenylethers, and some substances such as ester would also be formed. It was difficult to simply write a single reaction equation. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>

1 answer
2026-09-07 04:34

What is the reaction type of heating between the sulfuric acid and the sulfuric acid?

The reaction of sulfuric acid and the reaction of sulfuric acid was a kind of substitution reaction. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>

1 answer
2026-09-14 01:55

How does the sulfuric acid react with the sulfuric acid?

The reaction between the alcoholic group and the solution was an alkali-base reaction, which was accompanied by the protonation of the alcoholic group and the deprotonation of the solution. In the reaction, the hydrogen atom in the alcoholic group was replaced by the alcoholic group in the sulfuric acid, forming water and a positively charged ion. At the same time, the negative ion in the sulfuric acid combined with the positively charged ion in the alcoholic group to form a salt. The reaction equation was: <<p>><p></p>><p></p>><p><p>><p><p>><p><p>><p><p>><<p>><p> p>><p>> p> p>>& gt In general, because the alcoholic group was weakly acidic, it could react with the strong base, namely, soda. It did not require any special reaction conditions and could react at any time. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>

1 answer
2026-07-05 03:59

Why can sulfuric acid react with sulfuric acid?

It could react with sulfuric acid. The reason for the reaction between the two was that sulfuric acid had the ability to be acidic and could be used as a catalyst. From an acidic point of view, sulfuric acid could provide hydrogen ions to react with the ether. From the perspective of the sulfuric acid reaction, the sulfuric acid group (-SOH) in sulfuric acid could replace the hydrogen atom on the aromatic ring of the sulfuric acid. This was because the electron cloud density of the aromatic ring in the sulfuric acid was relatively high, and it was easy to be attacked by electrophiles (such as the sulfuric acid group in sulfuric acid), resulting in an electrophilic substitution reaction, which was the sulfuric acid reaction. During the reaction, different products would be produced depending on the reaction conditions. For example, it may produce p-hydrylsulfuric acid; if the reaction conditions are not properly controlled, because of the reduction of the ester and the oxidisation of the concentrated sulfuric acid, the ester may be oxided by the concentrated sulfuric acid into p-methylazone, and the p-hydrylsulfuric acid may be further Sulfonated to form 4 -hy- 1,3 -besilenedisulfuric acid. In order to prevent the sulfuric acid from evaporating the sulfuric acid during the process of sulfuric acid, the reaction temperature should be controlled to not exceed 90 ° C, and the concentrated sulfuric acid with a concentration of not more than 85% should be used. Other sulfuric acid could also be replaced by other sulfuric agents such as sulfur dioxide. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>

1 answer
2026-08-25 21:10

What is the chemical equation of the heating reaction between sulfuric acid and sulfuric acid?

When the reaction between the hot sulfuric acid and the sulfuric acid occurred, the reaction was more complicated. In addition to the strong oxidization of concentrated sulfuric acid, the dehydration and water absorption of hot concentrated sulfuric acid would also remove a water molecules from the molecules of the ether, forming substances such as diphenylethers, and some ester esters would be formed. These products reflected the various types of chemical reactions that took place between the sulfuric acid and the sulfuric acid under heating conditions, including the oxidization reaction, the dehydration reaction, and the possible ester reaction. However, it was difficult to simply use a chemical equation to completely and accurately summarize all the reactions. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>

1 answer
2026-09-20 09:24

Why did the sulfuric acid react with the sulfuric acid first?

In the experiment of preparing ethvl acetate, the order of addition of the reagents was as follows: alcohol, concentrated sulfuric acid, and ethvl acetate. The main reason was that the density of concentrated sulfuric acid was higher than that of alcohol, and when concentrated sulfuric acid was mixed with alcohol, it would release a lot of heat. If the concentrated sulfuric acid was added first and then the alcohol was added, due to the high density of the concentrated sulfuric acid, the heat would quickly accumulate at the bottom during the mixing process, which would easily cause the liquid to splash and cause danger. Adding alcohol first, then slowly adding concentrated sulfuric acid, could make the heat more evenly distributed. The reason why the last step was to add the sulfuric acid was because it was more volatile than the concentrated sulfuric acid. If the sulfuric acid was added first, the heat generated during the process of adding the concentrated sulfuric acid might cause a large amount of the sulfuric acid to evaporate, affecting the reaction yield. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>

1 answer
2026-09-15 03:30

Will the radical react with sulfuric acid?

Usually, they would not react with each other. They could coexist in water solutions. For example, in a solution of sulfuric acid, there were both sulfuric acid ions and sulfuric acid ions. However, in different environments, their existence and interaction would be different. In an acidic environment, the radical ions would combine with hydrogen ions to form water. In an acidic environment, both radical ions and sulfuric acid ions would exist, but the radical ions would be replaced by hydrogen ions in the base to form water. In an electrochemistry reaction, the reduction potential of the hydrogen ions was higher than that of the sulfuric acid ions. Therefore, the hydrogen ions would first accept electrons and be reduced to water molecules, while the sulfuric acid ions would be discharged later. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>

1 answer
2026-08-20 13:37

Iron or copper, sulfuric acid or silver, which one will react first?

In the sequence of metal activity, silver was behind iron, far away from iron, so iron reacted with silver nitrates first; if there was excess iron, it would react with copper sulfuric acid. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>

1 answer
2026-07-14 03:02
a
b
c
d
e
f
g
h
i
j
k
l
m
n
o
p
q
r
s
t
u
v
w
x
y
z