When the two reacted, the former was reduced and the latter was oxided to form elemental iodines. At the beginning of the reaction, due to the formation of the elemental sulfur, if there was starch, it would turn blue. As the reaction progressed, if the solution was titrified with the addition of thionate, the blue color would disappear if the thionate was reduced to the original form of the sulfur. If the reaction between the bichromate and the potassium iodate produced a bright green tri-, then the bright green color would be covered by the brown iodate and the blue color of the starch. The starch should be colorless after the blue faded, but the bright green color of the original tri-, then it would appear as the background. Read more exciting novels for free
Under weak acidic conditions (pH2 - 4), a color reaction would occur between CrCl4 and N, N-Diethvl- 1,4 -phenediammine (DEPDA) to form a purple complex with obvious spectral characteristics. The mechanism of the reaction was more complicated, and there would be different reaction processes under different conditions. The pH value had a great impact on the sensitivity and sensitivity of the detection of CrVI. Under this weak acid condition, the complex reaction between the two was relatively complete, and a stable color peak could be obtained. In addition, the reaction time, temperature, DEPDA concentration and other factors would also affect the reaction results. Based on this color reaction, some detection methods were established, such as chromicity, atomic absorption spectrum, molecular fluorescence probe, etc. The chromicity method was a relatively simple one. The reaction product was placed in an ultraviolet-visible thermometer to determine the concentration of Chromium-based fluorescence. The molecular fluorescence probe used DEPDA as the fluorescent probe. The combination of Chromium-based fluorescence and DEPDA would cause a change in fluorescence intensity. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
1. The reaction equation between the two substances: - In the reaction, the carbon dioxide (C6H8O6) was oxided by oxygen to form water and dehydrated Ascorbic acid (C6H6O6). 2. The reaction equation of the elemental form of Iodine and Vitamin C: - <<C6H8O6>>(Ascorbic acid, white)<<+ I2>>(Iodine, purplish-black)<<= C6H6O6>>(Dehydraconic acid, light yellow)<+2Hi>>(hydrogen iodate, colorless). <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
The combustion of ethyne is an exothermic reaction, and its reaction equation is [2C_{2}H_{2}+5_O2}<rightarrow4CO_{2}+2H_2}O]. The heat of combustion is the heat released when 1 mole of pure substance is completely burned to form a specified product at 101kPa. The heat of combustion of the ethyne is <<Delta H>=-1299.6kJ 'cdot mole ^{-1}>, which means that 1mole <C_{2}H_{2}>(g) will release 1299.6kJ of heat when it is completely burned to form water and carbon dioxide. From the reaction process, the chemical bond breaks and absorbs energy during the reaction process, and the chemical bond releases energy when it is formed. In the combustion reaction, the energy released by the formation of new chemical bonds is greater than the energy absorbed by the broken old chemical bonds, which is expressed as heat release. The heat of reaction is negative. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
The reaction between the acid and the acid was to form a sulfuric acid deposit. The reaction equation was Na 2 SiO2 +2HNO2 == H 2 SiO2 +2NaNO2. No colloid solution was formed, so the color of the colloid solution did not change. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
When the iodine-containing solution came into contact with the starch, the iodine-containing solution would appear blue; when the iodine-containing solution came into contact with the starch, the iodine-containing solution would appear purple-red; when the iodine-containing solution came into contact with the starch, the iodine-containing solution would appear blue-purple, purple, orange and other colors. When the chain length of the starch-iodate complex was less than 6 glucose groups, it would not show color; when the average chain length was 20 glucose groups, it would show red; and when the chain length was greater than 60 glucose groups, it would show blue. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
Phospholothalin was an acid and base indicator that would change color when it reacted with a base. In an acidic and neutral environment, phenylethanes are usually colorless, but in an acidic environment with a pH8.2 - 10.0, they turn red. When the base solution was too concentrated (the pH value was too high), the phenylethanes would immediately turn into colorless Carboxylate when they met the concentrated base solution, and then they would turn red and soon fade. In addition, when it comes into contact with urine, it may also change color according to the urine's pH. When the urine is acidic, phenylephalen may appear red, and when the urine is basic, phenylephalen may appear blue. In a strong acidic environment, thymolalin would turn blue, but when neutralized with acid, it would return to its original color. In addition, the wet test paper turned red when it came into contact with nitrogen. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
The reaction between acid and base solution may change color, which can be judged by the different colors of the acid, base, and neutral solutions. The principle of the color change of the alkali-base indicator was that the alkali-base indicator was some organic weak acid or organic weak base. In the solution, they could be partially dissociated into the indicator's ions and hydrogen ions (or hydrogen ions). Due to the change in structure, the molecules and ions had different colors, so they would display different colors in different alkali-base solutions. For example, when the sulfuric acid concentration in the solution was reduced, it would turn red when the sulfuric acid concentration increased. When acid and base react, the solution's pH-value will change, which will cause the acid and base indicator to gain a proton and transform from basic to the conjugated acid, or lose a proton and transform from acid to the conjugated base. Due to the change of its structure, the color will change. This color change is a chemical change, because the acid and base indicator is generally an organic weak acid or weak base. They are weakly ionised in water. The added acid or base will be ionised to produce H or Oh, which will cause the combination of the two to move to the equilibrium of ionisation and dehydration. It caused the ratio of ions to substances in the original solution to change and present different colors. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
When iron reacted with copper sulfuric acid, the solution first turned blue, then from blue to light green, and finally the solution turned brown. Red substances were separated from the surface of the iron. This was because iron was more mobile than copper. It could replace copper and react to form iron and copper. The solution itself was blue. As the reaction progressed, the copper ions were replaced, and the resulting FeSO4 gradually turned the solution into a light green color. However, the final brown color of the solution could be due to the complex chemical environment or further oxidization during the reaction process, but there was not enough information to determine the exact mechanism. Since no suitable illustration was found, the illustration of the color change pattern could not be provided. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
In the process of an electropathic substitution reaction, an electrophile (such as a positive ion, Lewis acid, etc.) would attack an organic molecules rich in electrons (such as the aromatic ring), forming a positively charged intermediate (such as a carbon ion on the aromatic ring), and then leaving a photon to complete the substitution reaction. For example, in the Frieder-Crafts alkylations, under the catalyst of a strong Lewis acid (such as dehydrated iron), the halo compound produces a carbon positive ion. This carbon positive ion acts as an electrophile to attack the aromatic ring and replace the hydrogen on the ring. Finally, it produces an alkylaromatics and hydrogen dioxide. In the C-alkylations, which was an acidic electropathic substitution reaction, the hydrogen on the carbon atom of the organic compound was replaced by a radical, and the alkylations (such as alkene, halane, alcohol, aldo, and others) participated in the reaction. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>
The chemical equation of the reaction between n-Butanol and potassium bichromate is: 2K Ü CrÜ O +8CH Ü CHÜ CHÜ Oh3 Ü HÜ SOÜ → 2CrÜ (SOÜ)+8CH Ü CHÜ + 2K Ü SOÜ +11HÜ O. This was a kind of oxido-reduction reaction, in which the potassium bichromate (K Ü CrÜ OÜ) was the oxidiser and the n-Butanol (CH Ü Oh) was the reducing agent. In the reaction, the oxygen atom of the potassium bichromate was reduced by the hydrogen atom of the n-Butanol, and the carbon atom of the n-Butanol was oxided to the aldo group (CH Ü Chou). If sulfuric acid was added to the reaction, n-Butanol would be oxided to n-Butanolic acid. The reaction equation was: CH CH Ü H Ü +2 (O) → CH CH Ü CH Ü COON + Ü H Ü O. In addition, n-Butanol could not be added to the solution of kalium bichromate to prepare n-Butanal, because this was equivalent to an excess of kalium bichromate. The excess kalium bichromate could catalyze the generated carbolic acid to give a carbolic acid. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>