Nail for fixing bamboo chips
The fixing nails of bamboo chips were also called bamboo nails. They could be divided into two types according to their different uses: pressing nails and bolt nails. The pressing sheet nail was used to cooperate with the pressing sheet to fix the bamboo surface, while the bolt supporting nail was used to support the bolt position, such as the bottom of each wall on the support, to bear the seat force of the wall and fix the position of the wall. In addition, the bolt also secured the relevant tenon and mortise parts. The bamboo nails were generally cut into the shape of a round rod with a big top and a small bottom. Ming Dynasty furniture was often drilled with small bamboo nails from the mortise and tenon to strengthen it. The shape of the bamboo nail was required to be big at the top and small at the bottom. The cut surface was straight, the cross section of the bamboo green was slightly narrower than the bamboo yellow, and the wall thickness was equal to the width of the bamboo green surface. The specific specifications varied according to the use.
What tools are used to nail bamboo chips?
The common tools used to nail bamboo chips were bamboo nails, bamboo hammers, pointed hammers, wooden hammers, and so on. Among them, the bamboo nails were used to fix the bamboo pieces. They could be used together with the pressing sheet to fix the bamboo surface. Bamboo hammers, pointed hammers, and wooden hammers could be used to knock bamboo nails into bamboo sheets. These tools could effectively fix the bamboo pieces so that they would not loosen.
Method for connecting bamboo chips and bamboo chips with a bayonet
There were many ways to connect bamboo chips, and one of the most common methods was to connect them with a bayonet. The bayonet was a metal joint that could be used to secure the connection. However, there were some problems with the use of nails when making bamboo products, such as high cost, metal scraps that polluted the environment, and the lack of coordination with bamboo chips. In order to solve these problems, someone proposed an eco-friendly, low-cost bamboo nail suitable for connecting and fixing bamboo chips. The bamboo nail consists of a bamboo nail, a bamboo nail body and a bamboo nail tip in turn along the length direction. The shape of the bamboo nail cap can be a hemisphere, a round table or a polyhedron, and the thickness is generally 2-5 mm. This method of bamboo nail connection could play an auxiliary role in fixing, and the bamboo needed to be punched in advance before use. In summary, the bamboo strips could be connected by this kind of eco-friendly bamboo nail.
How to nail a nail on bamboo
When nailing bamboo, the following methods can be used to reduce the risk of bamboo cracking. First of all, you can use an electric drill to drill a hole in the bamboo where the nail is nailed. The diameter of the hole should be slightly smaller than the diameter of the nail, so that the nail can better enter the bamboo and reduce the possibility of cracking. In addition, when using the nail, one had to take it easy and enter it bit by bit to avoid hitting it sideways. In addition, choosing some softer bamboo, such as red pine, willow, etc., could reduce the risk of cracking. In addition, keeping the bamboo in a moist environment also helps to prevent cracking. You can put a few basins of water or keep the air moist next to the bamboo products. In short, the above methods could be tried to reduce the splitting of the bamboo during nailing.
The bamboo chips are connected into bamboo boards
There were many ways to connect bamboo chips into bamboo boards. A common method was to use processes such as planing, stitching, and turning. First, the bamboo was cut into bamboo tubes and then split into bamboo strips. Next, the bamboo pieces were cut and glued into bamboo boards. Then, the bamboo board was cut horizontally and glued again to form a blank. Finally, through the processes of turning, polishing, assembling, and covering, bamboo products of various shapes were made, such as goldfish tanks, large soup basins, bowls, fruit boxes, tea basins, vases, and trophies. This artwork has the natural texture of bamboo, and its diameter is several times larger than that of bamboo. It also has a special artistic effect, which is both beautiful and practical. Other methods of connecting bamboo strips included binding, inserting, and burying the head in the cap. Among them, the binding method was suitable for simple connection of two bamboos, the inserting method was suitable for more complicated connection methods, and the burying cap method was suitable for thicker bamboos. In addition, sleeve connection and metal hoop connection could be used to connect the length, multi-directional connection and angle turning between bamboo. In short, there were many ways to connect bamboo chips into bamboo boards, and the specific choice would depend on the actual application scenario and requirements.
Illustration of bamboo fixing method
There were many ways to fix bamboo pieces. The following were some common methods: 1. [Binding method: You can use rope or thread to bind it.] He first marked the places that needed to be connected, then cut out a part that could be inserted into another bamboo, connected them together, and tied them up. 2. Plugging method: First, you need to cut off some bamboo skin at both ends to form a plug-like tip, trying to preserve the integrity of the bamboo piece as much as possible. Then, he connected the two bamboos together and inserted the peeled end into the other bamboo. Use glue, cement, or other materials to fix it. 3. [Buried head cap method: suitable for thicker bamboo.] He first made one end into a cylinder (also known as a "cap"), then cut a matching notch on the bamboo at the other end. Finally, he fastened the cap on it and secured it tightly with a tool. 4. Screw fixing method: You can use a screw to fix the bamboo pieces together. First, he laid down half of the bamboo piece, then passed the bamboo piece through the fixing incision, and then laid down half of the bamboo piece. Every five pieces were fixed once, and they were fixed with screws. These methods could be chosen according to actual needs and application scenarios.
Fixing method of bamboo with screw
The following fixing methods can be used to fix the bamboos together: First, special screws can be used to fix the bamboo flooring to the keels to ensure that the screws are evenly distributed and vertically fixed. In addition, special connecting pieces could be used to connect the edge of the floor to the knight board to enhance the stability of the floor. The other method was the floating installation method, which was to use the mortise and groove between the bamboo flooring boards to bite each other. There was no need to use glue or nails to adapt to the changes in the outdoor environment. In some cases, it is also possible to use a floor glue to stick the bamboo flooring to the ground, but you need to ensure that the ground is flat and dry, and use a special floor glue. It should be noted that when installing outdoor bamboo flooring, the first thing to do is to do the basic treatment work to ensure that the ground is flat, clean and dry. As for the method of fixing the bamboo to the wall, he could use nails or screws to fix the bamboo directly to the wall and add appropriate support around it. In summary, you can use screws to fix the bamboos together, but you need to pay attention to the use of appropriate screws and fixing methods.
How to nail bamboo
There were several ways to nail bamboo without breaking. One method was to first use a drill bit that was slightly thinner than a nail to drill a hole, and then nail it. Another method was to soak the bamboo before nailing it. Another method was to burn the nails red before nailing them into the bamboo. Another suggestion was to cut off the tip of the nail with pliers before drilling holes in the bamboo. These methods were all to reduce the risk of the bamboo splitting.
The nail that nailed the bamboo
Bamboo nails were a type of fixing piece used to fix bamboo furniture. According to different uses, bamboo nails could be divided into pressing nails and supporting bolts nails. The pressing sheet nail is used to cooperate with the pressing sheet to fix the bamboo surface; the bolt supporting nail is used to support the bolt position, such as the bottom of each wall on the support, to bear the seat force of the wall and fix the position of the wall. The shape of the bamboo nail was generally a round rod with a large top and a small bottom. The cut surface was straight, the cross section of the bamboo green was slightly narrower than the bamboo yellow, and the wall thickness was equal to the width of the bamboo green surface. The specific specifications varied according to the use. In Ming Dynasty furniture, bamboo nails were often used to drill small bamboo nails into the mortise and tenon to strengthen it.
Bamboo nail board
Bamboo nail board was a building material used to connect bamboo and wood structures. We can understand that bamboo nail boards can be used to fix the connection between bamboos by bolt connection or metal connection nodes. Bolt connection was a common method. It was done by punching holes in the bamboo in advance and then connecting it with bolts, nuts, and pads. Metal joints were connected to the bamboo through metal parts such as embedded steel plates, embedded anchor bolts, and steel pipes. These connections were both beautiful and reliable, ensuring the stability and durability of the bamboo nail board. However, the search results did not provide a clear answer to the specific application, production method, and other related information of the bamboo nail board.
What kind of nail can nail a bamboo piece without cracking?
There were several ways to prevent the bamboo from cracking when the nail was nailed. First of all, he could use a drill that was slightly thinner than a nail to drill holes in the bamboo before nailing the nail in. This would reduce the possibility of the bamboo pieces cracking. In addition, the tip of the nail could be cut off to make it flat. This way, when the nail entered the bamboo, it would cut off the bamboo fibers, reduce the squeezing force, and thus reduce the risk of cracking the bamboo. In addition, keeping the bamboo in a moist environment also helps to prevent cracking. You can put a few basins of water next to the bamboo products or keep the air moist. In short, the above methods could be used to prevent the bamboo from cracking when nailing nails.