A century-old aircraft engineThe development of aircraft engines had been around for a hundred years. Since the Wright brothers modified a water-cooled engine in 1903 for the "Flyer One" aircraft, the development of aircraft engines could be roughly divided into two periods.
The first period was from the beginning of the first power generation to the end of the Second World War. During this period, the piston-type engine dominated for about 40 years. The early piston-type engines had low power and a small power-to-weight ratio. For example, the engine used by the Wright brothers had a power of only 8.95 kWh, a weight of 81kg, and a power-to-weight ratio of 0.11 kWh/daN. Driven by the two world wars, the piston-type engine was continuously improved and perfected. It reached the peak of technology around the end of World War II. The power was increased to about 2500 kWh, the power-weight ratio reached 1.5 kWh/daN, the flight height reached 15000m, and the flight speed increased from 16km/h to nearly 800km/h. However, the power plant of the piston-type engine plus the propeller had the disadvantage of limited flight speed. As the flight speed increased, the required engine power increased sharply and the propeller efficiency decreased sharply.
In the second period, from the Second World War to the present, the aviation gas turbine engine replaced the piston-type engine and started the jet era. The turbine jet engine was composed of a fan, a pressure chamber, a combustion chamber, a guide blade, a high-pressure turbine blade and a turbine disk, a low-pressure turbine blade and a turbine disk, an afterburner, a tail pipe, and other parts. Its working principle was to suck air into the combustion chamber and mix it with fuel for combustion. The resulting high-temperature and high-pressure airflow passed through the turbine and then ejected from the tail pipe to generate thrust. The air was compressed by the turbine, and the combustion chamber mixed the air and fuel to form thrust through a series of components. Turbofan engines were commonly used in modern passenger aircrafts. The central core consisted of fan blades, turbine blades, fuel injection orifices, combustion chambers, and other components. It divided the inhaled air into two paths. Most of the air was ejected from the bypass to provide greater thrust, and a small portion entered the core to produce a relatively small hot flame thrust. However, this method was more efficient and fuel-efficient. However, the speed increase ability was limited, which met the economic requirements of passenger aircrafts. The engines used by fighter jets were different from those used by commercial airliners. Fighter jet engines needed a smaller size to fit the space of the aircraft, and they had higher requirements for speed, maneuverability, and other performance. Although the efficiency was not high enough, the thrust was large enough.
Today, the C919 was using the LEAP - 1C engine produced by the US-France joint venture company, CCM International. Although China was constantly working hard in the field of aero engines, there was still a gap between China and the international advanced level in key technologies. There were still many challenges on the road of independent research and development of aero engines, but there were also many research and development projects in progress, aiming to gradually achieve the goal of independent control.
The novel "Hundred Years of Spaceship" is equally exciting. Everyone is welcome to click and read it!