cartoon hand drawing tutorial

Start by choosing the tools you'll need, like pencils and paper or a digital drawing tablet. Then, break down the drawing process into simple steps, like sketching the basic shapes first.

First, break down the hand into basic shapes. Then, focus on light and shadow to add depth. Look at tutorials and reference images for inspiration. It takes time and patience to master it.

Well, start with basic shapes and build up from there. Pay attention to proportions and practice a lot.

It's not that hard. Start with basic shapes and build up from there. Use the pen tool for detailed lines and experiment with different brush styles.

First, start with simple shapes like circles and squares to form the basic structure. Then, add details like facial features and clothing. Finally, use shading and colors to make it look more realistic.

Well, start with basic shapes and simple lines. Focus on getting the proportions right for the characters or objects you want to draw.

Here are some tutorial on how to hand-knit rings: ** 1. Use No. 72 jade thread to weave a ring (similar to the B-style ring)** 1. [Material preparation: 3 strands of 40cm *2, 100cm*2, 2mm *20 gold-coated beads, 3mm *1 925 silver C-buckle (You can replace the 3 strands of thread with No. 72 jade thread to make the tutorial clearer).] 2. Operation steps: - Two 40-cm and two 100-cm three-strand threads (the same operation was done when using jade thread) were aligned at one end, and a slipknot was tied at the 10-cm position. The knot was clamped with a clip. At this moment, the two long lines were placed in the middle, and the short lines were placed on both sides. - Look at the two lines on the left. The short line is the axis, and the long line is the winding line. Make a sparrow head knot. After tightening the first sparrow head knot, tie the second sparrow head knot (repeat the first sparrow head knot). There are a total of three sparrow head knots on the left. - Look at the two lines on the right. The short line is the axis, and the long line is the winding. Make a sparrow head knot. Make three sparrow head knots on the right. - The two long thread ends in the middle were pulled, and then a 2mm gold bead was inserted, pulling the gold bead to the root of the thread. - Make another three sparrow head knots on one side (when using three strands of thread to make the first sparrow head knot, don't pull it too tightly to avoid bending the other axis). - Repeat the method of crossing a bead and making three sparrow head knots to the appropriate length (for example, 6cm finger circumference can make 20 beads). - The two axes were placed on the top and on the side, and the two axes made an oblique knot. - After the knot on the other end was untied, it was done according to this method. Then, cut off the two ends of the knot that were left apart and burn it well (take a photo of the back, and the other side is the front). - The two ends were connected together, and the corresponding two wires were fixed with an oblique knot. The other two wires were also fixed with an oblique knot, and the four wire ends were all cut off and burned. - He took a 3mm 925 silver C-buckle and used an awl to widen the opening of the C-buckle. He buckled it at the place where it had just ended and tightened the opening of the C-buckle with a clip. ** 2. Use No. 71 jade thread to weave a ring ** 1. [Material preparation: 90cm No. 71 jade thread, a small bead, and an auxiliary thread.] 2. Operation steps: - He took a 90-centimeter No. 71 jade thread, hung an auxiliary thread in the center, and casually tied a knot. - He began to weave a double lock knot. He raised his left pinky and index finger, pinched his left thumb and middle finger, raised his right thumb, and picked up the thread with his thumb. He pinched the leftmost thread with his left hand and tightened it with his right hand. Pick up the innermost thread on the right with your left thumb, pinch it with your left hand, loosen it with your right hand, and tighten it with your right hand. Change it to the right, then to the left (except for the first step of hooking the outer thread, repeat the left and right hooking the inner thread), and repeat the left and right knitting until the appropriate length (measured according to the size of the fingers). - He pulled out the string, inserted the end of the string into the bead (if the hole was too small to pass through the middle, put the end of the string), and pulled out the auxiliary line. - He took a thread and passed it through the hole. The left and right threads were tied into a set of flat knots to tighten it or a single knot. He cut off the thread and burned it. The traces of burning were hidden in the beads. ** 3. Use 5 threads to weave a ring ** 1. [Material preparation: 5 threads] 2. Operation steps: - He combined the five threads, tied a slipknot at a distance of 10cm, and fixed it on the workbench with a pin. - The 2nd line on the right was used as the axis, and the 3rd to 5th lines were used as the winding line. They were then woven into a right oblique knot. - The first line on the right was used as the axis, and the second to fourth lines were used as the winding line. They were then woven into a right oblique knot. - The first and second lines on the right were combined and strung with millet beads. - The 2nd line on the left was used as the axis, and the 3rd to 5th lines were used as the winding line. They were then woven into a left oblique knot. - The first line on the left was used as the axis, and the second to fourth lines were used as the winding line. They were then woven into a left oblique knot. - The first and second lines on the left were combined and strung with millet beads. - The 2nd line on the right was used as the axis, and the 3rd to 5th lines were used as the winding line. They were then woven into a right oblique knot. - According to the above weaving method, the loop operation, according to the hand circumference to weave to the appropriate length, cut off the three winding lines at the end (if you are worried about cutting the wrong line, you can not cut it first), untie the single knot. - The first and second lines on the right side of the upper side were combined and strung with millet beads. The second line on the left side of the upper side corresponded to the second axis on the lower side. The axes crossed and combined to form an axis. The other three lines were wound, and they were woven into a left oblique knot and tightened. - The other two axes were tied diagonally according to the above method. Finally, the thread ends were cut off and burned. ** 4. Woven a ring with a flat knot ** 1. [Material preparation: A thread of about 20 centimeters (color can be chosen, or it can be woven with different colored threads), a bead or other ornaments can be prepared for decoration, and a thread of about 40 centimeters.] 2. Operation steps: - Take a thread about 20 centimeters long and circle it around your index finger (the degree of relaxation depends on the size of the finger. It's better to loosen it a little). - Then, he took out a thread about 40 centimeters long and placed it in the middle. He passed it through the circle he had made earlier and pinched it with his fingers. The thread was divided into two parts. - He pressed the right line on the circle to the left, pressed the left line to the right, and passed it into the circle from below and out from the right line. - Then, he pressed the left thread on the circle, and the right thread pressed against the left thread. After passing through the circle, he passed through the left thread, and then pulled it in to complete a flat knot. - He continued to weave the flat knot. When he reached the sixth pair of flat knots, the length was about half of his finger. After tightening the thread, he moved on to the next step. - If you have prepared a bead, you can thread the bead into the thread at this time (the bead hole is small, you need to carefully thread two threads). After you put it on, pull the thread and continue to weave the flat knot. - The length of the braid was determined according to the size of the finger. After the braid was completed, the head and tail were connected together. ** 5. Woven a star ring with a twister stick ** 1. [Material preparation: Twister stick.] 2. Operation steps: - He left a section at the beginning, then folded it, and then folded it into a length of about 1.5 centimeters. - Twist five corners according to this length and pinch it into a small five-pointed star. - He twisted the two corners, wrapped them slightly on one side, and passed them through. - On the other side, he twisted the two corners into a ring and closed it. "Rose Fragrance Shadow: The Story of Sweetheart's Growth" was equally exciting. Everyone was welcome to click and read it!

Here are some tutorial tips on handmade slippers: * * 1. Hook soles tutorial ** 1. * * Starting Needle and 1st Circle ** - Twenty-four needles. In the first round, he did not add or reduce the hook 23 short needles, then he hooked 3 short needles in the last round, then did not add or reduce the hook 22 short needles, and returned to the first round to hook 2 short needles. At the end of each round, he pulled out. 2. * * Round 2 ** - The first needle was hooked with 2 short needles, 22 short needles without addition or reduction, the last 3 needles were hooked with 2 short needles, 22 short needles without addition or reduction, and the last 2 needles were hooked with 2 short needles. 3. * * Round 3 ** - For the first 2 needles, press (1, 2) to remove the hook of the short needle, then follow by 10 short needles without adding or reducing the hook, 12 medium long needles, the last 6 needles each hook 2 medium long needles, then 12 medium long needles without adding or reducing the hook, 10 short needles, the last 4 needles press (1, 2)* 2 to remove the hook. 4. * * Round 4 ** - For the first 3 needles, the hook was removed according to (1, 2, 1). For the last 12 needles, the hook was removed according to (1 long needle, 2 long needles)* 2 groups. For the last 12 needles, the hook was removed according to (1 long needle, 2 long needles)* 2 groups. For the last 12 needles, the hook was removed according to (2 long needles, 1 long needle)* 2 groups. For the last 6 needles, the hook was removed according to (1, 2, 1)* 2 groups. 5. * * Round 5 ** - Without adding or reducing the hook, he made a circle of short needles, then broke the thread and used the sewing needle to close the needle. The length of the model sole was about 24 cm, the width of the heel was about 7 cm, and the width of the toe was about 9.5 cm. If you wanted to adjust the length of the sole, you only needed to adjust the number of locking needles at the beginning. When you hooked it at the back, the method of hooking at both ends remained the same. You only needed to change the number of needles that did not increase or decrease. * * 2. Guide to Hooking Diamonds ** 1. * * Round 1 ** - He used the A thread to loop it up, hooked out 8 short needles, and then pulled them out. 2. * * Round 2 ** - Change the B-line, hook 1 and 3 long needles on each short needle (hook 4 long needles in 1 needle, pull out the hook needle, thread the first needle into the loop, pull it out, and then lock 1 needle). After the last hook needle is done, lock it again, and thread the first long needle on the first hook needle. 3. * * Round 3 ** - Change the A thread, hook 3 long needles in the beginning of the mesh, and then hook 3 long needles in the next mesh, then hook 3 long needles in the next mesh, and then hook 3 long needles in the next mesh. After hooking 3 long needles in the mesh, hook 3 long needles in the first mesh, and then hook 1 long needle in the first mesh. 4. * * Round 4 ** - Hook 1 lock 2 short needles in the opening mesh, hook 1 short needle on the long needle, hook 2 short needles 1 lock 2 short needles on the corner 2 lock, and finally hook 2 short needles in the opening mesh, and then hook 1 short needle on the first needle. 5. * * Line 5 ** - 1 lock, turn over, hook 5 short needles, 4 medium long needles, 5 long needles in turn, hook 2 long needles at the 1 lock on the corner. 6. * * Line 6 ** - 1 lock, flip, no hook, no hook, a row of short needles (16 short needles), broken thread. On the other side, another hook was connected at the lock 1 on the reverse corner. The sixth row: the lock 1 hook 4 lock 1 long needle, followed by the hook 5 long needle, 4 medium long needle, and 5 short needle. 7. * * Line 7 ** - 1 lock, turn over, do not add or reduce 16 short needles, do not break the thread; 1 lock, hook a row of needles (25 needles, about 16 cm long) on the side; hook a row of needles (19 needles, about 13 cm long) on the other symmetrical side. The height of the hook piece is about 11 cm. Hook another piece in the same way. * * 3. Assembly tutorial ** - The two soles were overlapped, and a mark button was added at the position shown in the picture below. Then, the hook piece and the shoe pad (from the heel to the toe) were pieced together with a short hook needle. After the piecing was completed, the toe was continued to be hooked. 1 short needle * 3 needles, 2 short needles * 1 needle, 1 short needle * 2 needles, 2 short needles * 1 needle, 1 short needle * 3 needles. Then, the other side was also pieced with the hook piece, and the heel part of the shoe pad was continued to be stitched. There was also a simple method to hook the sole of the shoe: 1. * * Round 1 ** - The loop was pulled up, and eight short needles were hooked in the loop. Finally, the needle was pulled out.(The method of pulling out the needle was to pull out the crochet first, then insert the first short needle from the back to the front, and then insert the last loop at the same time. Then, pull it out from the back, pull out the crochet, and then insert it again.) 2. * * Round 2 ** - 1 lock, hook 1 short needle in the needle of the guide, then hook 1 short needle in the vertical braid needle on the left, and hook 1 short needle in the following needle (hook 1 short needle in the braid needle, then hook 1 short needle in the vertical braid needle on the left). When inserting the vertical braid needle, turn it to the opposite side to make sure that it is inserted between the two threads of the braid needle. 3. * * Round 3 ** - Hook a circle of short needles without adding or reducing (every needle is inserted into the vertical braid needle to hook). "Prosperous Brocade Record" is equally exciting. Everyone is welcome to click and read it!

First, start with basic shapes to outline the body. Then, add details like facial features and clothing. Use simple lines at first and gradually build up complexity.

The key steps include getting familiar with different drawing tools. Begin with simple objects and gradually move to more complex ones. Pay attention to light and shadow to make the drawing look more realistic. And keep practicing regularly to improve your skills.