potting soil mix for indoor plants

There were many key points and precautions for growing flowers indoors. ** 1. Flower pot and soil ** 1. ** Flower pot selection ** - Choose a flower pot with good ventilation. Common flowerpots were made of plastic, porcelain, clay pots, purple clay pots, and so on. Purple clay pots, pottery pots, and earthen pots had good breathability, which could reduce the difficulty of growing flowers. Porcelain pots had a high appearance, but they were not practical and expensive. At the same time, the size of the flower pot should be appropriate. Small pots for large seedlings were not conducive to the extension of the root system. It was difficult to control the watering amount for small seedlings in large or deep pots, and the soil in the pots had to be changed every other year. 2. ** Soil Requirement ** - The soil must be loose and well-permeated. Granular soil can be used, which has good drainage and fertility, and coconut husks can also be added as a fiber medium. Rotten leaf soil and peaty soil are soft and airy. In order to enhance the soil's penetrability, it can also be mixed with coal cinders, river sand, pearlites, etc. The bottom of the flower pot can be lined with ceramsite, crushed rubble, etc. to facilitate drainage. ** 2. Selection of Flower Species ** - They had to choose according to their own environment. If the lighting was not good, shade-resistant plants could be raised, such as One-leaf Orchid, White Palm, etc., while small space could be used to raise petite flowers, such as cactus, petunias, etc. If you don't have enough experience in growing flowers, you should start with flowers that are easy to care for. ** 3. Key Points of Care ** 1. ** Watering ** - The plants should be watered according to their drought-resistant or wet characteristics. Drought-resistant green plants need to wait until the soil in the pot is completely dry before watering, while wet green plants need to wait until the soil in the pot is dry and wet. The maintenance requirements of the same plant in different seasons were different. It was necessary to give appropriate watering according to the habits of the flowers, the growth state, and the seasons. 2. ** Light ** - The appropriate lighting should be given according to the flower's habits, growth state, and seasonal changes. 3. ** Trimming ** - Cut off overcrowded branches, long branches, weak branches, etc. when the growth is exuberant, which is conducive to ventilation and light to reduce pests and diseases. When the flowers of flowering green plants bloom and wither, and when the flowering period ends, the remaining flowers, branches, and branches with diseases and pests should be cut off in time, and the old and dead branches should be cut off before winter. 4. ** Fertility ** - Follow the principle of thin fertilizer and diligent application, avoid applying thick fertilizer and raw fertilizer. Generally, the fertilizer was applied during the growth period of the green plants, after the flowers died, and during the winter. During the vigorous growth period, the number of fertilizers can be increased appropriately. During the dormant or semi-dormant period, the growth is slow and the demand for fertilizers is small. It is best to apply less or no fertilizer in summer and winter. 5. ** Aeration ** - The indoor green plants should be kept in a well-vented environment, especially in the hot summer and cold winter seasons. In midsummer, when the temperature reached 30 - 35 degrees, poor ventilation was easy to suffer from pests and diseases; when the room temperature was lower than 5 degrees, the windows should be opened for proper ventilation when controlling water and keeping warm. ** 4. Taboo positions for indoor flower growing ** 1. ** Kitchen ** - The kitchen was filled with oil and smoke, and the ventilation was not smooth. The oil and smoke would cause damage to the plants, which was not conducive to the plants 'breathing and photosynthesis. 2. ** Entrance ** - The wind speed when the door was opened and the impact of frequent opening and closing of the door on the light would be detrimental to the growth of plants. It might cause the branches of plants to break, and the intermittent light was not conducive to the growth of plants. 3. ** Next to home appliances ** - Household appliances generate heat when they work. High temperature, dry or humid environments (when household appliances spray water) will affect the health of plants, making it difficult for plants to survive and grow. 4. ** The bathroom ** - The humidity in the bathroom was high, and the steam was not easy to dissipate. Too much humidity would affect the growth of the potted plants. The novel "Mixed Flowers" is equally exciting. Everyone is welcome to click and read it!

First, make sure they get the right amount of light. Different plants have different light requirements, so you need to place them in suitable locations. For example, succulents usually need more sunlight, while some ferns prefer shade.

The acidic sandy loam was suitable for the cultivation of pine potted landscape, and the pH value was between 4.5 and 5.5. Neutral soil or slightly acidic soil could also be used. The best soil for potted plants was mountain soil or rotten leaf soil, which could be mixed with 30-40% sand as the cultivation soil. The best time to plant the potted pine trees was from March to April, and it could also be planted after autumn.

The soil on the moon was usually composed of lava and rocks from volcanic eruptions on the surface of the moon. This soil was called moonstone, and it was a material mainly composed of silicates and agglomerates. Due to the lack of water resources and suitable temperature conditions on Earth, it may not be feasible to grow plants on the Moon. However, some plants are adapted to cold environments, such as cacti and succulents. They can survive in extreme environments. If humans could grow some plants on the moon, these plants would need to adapt to the extreme conditions of the moon, such as low light, low temperature and strong winds. This required special breeding techniques to ensure that they could grow and thrive. At the same time, we also need to consider the cost of plant growth and maintenance, as well as how to bring plants back to Earth.

The indoor bamboo flooring was a kind of environmental protection, durable and beautiful flooring material. Compared to traditional wooden flooring, it had better environmental protection. The bamboo flooring was made of natural bamboo. The bamboo had a short growth cycle and could be regenerated quickly. It would not cause pressure on forest resources. Traditional wooden flooring required a large number of trees to be cut down, which had a certain impact on the environment. In addition, indoor bamboo flooring does not contain harmful substances, such as volatile organic compounds such as Formalide, while traditional wooden flooring may contain substances harmful to human health. The indoor bamboo flooring also had high durability, high compression resistance and wear resistance. Bamboo had a higher hardness and was not easy to leave dents and scratches. In contrast, traditional wood flooring was relatively soft and easily affected by pressure. In addition, the bamboo flooring also had good moisture resistance, and it was not easy to be damp and expand. It could maintain a stable state in a humid environment and extend its service life. Overall, indoor bamboo flooring was an environmental, durable, and beautiful flooring choice.

There were a few simple ways to divide the room. First of all, the bookshelf compartment was a simple and practical way to place bookshelves between the living room and bedroom. It not only increased the storage space, but also added a colorful atmosphere to the room. Secondly, the curtain cubicle was an economical, convenient, and least difficult way to operate. It could be changed at any time. In addition, the screen partition was also a simple and affordable way. Not only was it cheap, but it was also practical and could effectively divide the room. In addition, the cabinet compartment and sofa compartment were also suitable for small units. Finally, the floor visual compartment was a simple way to achieve a compartment by distinguishing the floor material or color. All in all, these methods were simple and economical indoor cubicles.

There were many types of bamboos that could be raised indoors, among which the common ones were Asparagus affinosus, Rich Bamboo, Lotus Leaf Bamboo, Lily Bamboo, Palm Bamboo, Luohan Bamboo, Rice Bamboo, Phoenix Bamboo, etc. The bamboo had small branches and remained green all year round. It was suitable for indoor maintenance and could absorb some harmful substances. Rich bamboo had tall stems and thick green leaves, symbolizing wealth and peace. The lotus leaf bamboo was also called Guanyin bamboo and had a high ornamental value. Other species such as lily bamboo, palm bamboo, Luohan bamboo, rice bamboo, phoenix bamboo, etc. were also suitable for indoor maintenance.

Small indoor playgrounds were entertainment venues for families with children or teenagers, usually completely indoors. Compared with large amusement parks, it was smaller in scale, had fewer attractions, and had a lower per hour income. There was a wide variety of amusement equipment. For example, the indoor children's theme park had a complete range of amusement equipment in the city. The upgraded indoor amusement park in the sky garden had more than 70 entertainment facilities, most of which were large-scale electronic technology games. There were also indoor amusement parks with children's entertainment facilities such as ocean ball pools, trampolines, and handmade areas. The prices were also different. For example, a 98-yuan ticket to the Sky Garden could allow you to play more than 70 events, and some places might sell amusement equipment at different prices. In addition, some small indoor playgrounds would provide some special services. For example, the indoor children's theme park had 58 infrared disinfection lamps for disinfection every night, 48 surveillance cameras to protect the safety of children at all times, free Wi-Fi Internet access, and parent-child interaction games or activities from time to time. Translated as: Palace of Pleasure, the novel is equally exciting. Everyone is welcome to click and read it!

The bleached-layer soil is a layer of soil formed by the loss of clay particles and/or free iron dioxide, sometimes accompanied by the in-place condensation of iron dioxide. Its color was mainly determined by the sand particles and powder particles that formed the whiteness. The bleached layer was usually composed of bleached substances, including segregated iron-Mn agglomerations, agglomerations, and patches. The whiteness itself showed the characteristics of the color, such as a tint lower than 2, a moistened lightness greater than 3, a dry lightness greater than 6, and so on. The thickness of the blanched layer was generally between 20-30cm. Its distribution and formation in the soil are related to the clay content, iron dioxide content, water eluviation and drainage of the soil. There was a specific level of diagnosis for the bleached layer in the soil systematic classification. For example, there was a classification for the bleached layer in both the Chinese soil systematic classification and the American soil systematic classification. However, there were still some disputes and differing views on the cause and nature of the bleachers.

There are many types of soil pesticide to choose from. The following are some commonly used soil pesticide: 1. Imidacloprid: It has the characteristics of systematic absorption, high efficiency, wide spectrum of insects, long duration, etc. It is suitable for controlling piercing-sucking mouthpart pests, such as aphids, leafhoppers, planthoppers, whiteflies, thrips, etc. 2. Acetamiprid: It has the characteristics of strong internal absorption, low dosage, good quick-acting, high activity, long duration, etc. It is suitable for controlling pests of vegetables, fruit trees, potatoes, tobacco and other crops. 3. Thioxam: It has the characteristics of contact toxicity, stomach toxicity, and internal absorption activity. It has higher activity, better safety, wider pesticide spectrum, faster action speed, and longer effective period. In addition, there are other pesticides such as phoxim, high-efficiency cyhalothrin, etc., but you need to pay attention to the selection of suitable pesticides to avoid the use of organic phosphorus pesticides and high-efficiency cyhalothrin that is easy to cause allergy. It should be noted that different pests may have different reactions to different pesticides. Therefore, before using soil pesticides, it is best to understand the types of pests and choose the appropriate pesticide for spraying or soil treatment.