bonsai pop

The wool flower bonsai was a small craft that was very suitable for DIY-making. It could be made and placed at home to add a sense of nature and vitality. There were many ways to make a flower bonsai. You could choose different materials and steps according to your personal preferences. You can refer to the following production method: First, prepare different colors of yarn and tie them into the shape of petals. Choose healthy wool flowers and remove withered and damaged flowers. You can also refer to the Bonsai with Wool Hooked Flower tutorial and use the Corbeque box, wool, crochet, and other tools to make flower pots. In addition, one could also make woolen flower bonsai through weaving, crochet, and other manual techniques, such as crochet tulip flower bonsai, lotus bonsai, and so on. Making a bonsai of wool flowers required some patience and skill, but once the design was complete, the other steps were relatively easy. The wool flower bonsai did not need water or sunlight, and it was not easy to wither. It was a durable and beautiful home decoration.

In the reference materials, he only found that the protagonist in the novel "Portable Space" gradually stepped into the world of flowers, trees, and bonsai through magical space, but he did not find more novels that specialized in bonsai trees. If one wanted to write a novel about bonsai trees, one could dig up materials from the art of making bonsai, maintenance management, different styles, and other aspects. Then, one could combine the growth of characters, story development, and other elements to create a novel. For example, it could describe how a person grew up from knowing nothing about bonsai to becoming a bonsai master. During the process, it could be interwoven with an introduction to various types of tree bonsai styles (such as straight pole, inclined dry, literati style, etc.), as well as the difficulties and challenges encountered in the process of bonsai production, interpersonal relationships, and so on. <a href="/?from=ask_words" style="color:red" target="_blank">Read more exciting novels for free</a>

In the art of bonsai, knotting was a kind of modeling technique. For example, twisting the "fried dough twist" shape was a bit like knotting in the bonsai technique. This technique required beautiful lines. It seemed simple, but it was difficult to do it well without a master. After doing it well, it often had the feeling of flowing clouds and flowing water. In addition, artificial knots also involved knotting. In the sapling stage, the soft branches were knotted to form lumps. As the branches grew, it would take about two years to complete the shape (usually, the first year was knotted, the second year was clumped, and the rest was raised to become thicker). The novel "Sitting and Watching Immortals" is equally exciting. Everyone is welcome to click and read it!

The maintenance method of the crabapple bonsai included the following points: First, crabapple flowers needed sufficient light, so they should be placed in a place with sufficient sunlight, but they needed to be properly shaded at noon in summer. Secondly, crabapple flowers liked moist environments, so they needed to be watered regularly, especially during the spring and summer growth period. In autumn, the amount of watering should be gradually reduced. In terms of fertilizer application, crabapple flowers needed an appropriate amount of fertilizer. During the growth period, they needed to apply thin fertilizer 1-2 times a month, paying attention to the combination of nitrogen, phosphorus, and potassium. In addition, crabapple flowers also needed to be trimmed regularly, including cutting off dead branches, infected branches, weak branches, etc., to promote the growth and flowering of new branches. Finally, the flower pot for the crabapple bonsai could be a purple clay pot, a tile pot, a plastic pot, or a porcelain pot, but it had to be a slightly larger pot to facilitate the growth of the plant. In general, the maintenance of crabapple bonsai needed to pay attention to light, watering, fertilizing, trimming, and choosing a suitable flower pot.

The golden marble was an evergreen or semi-evergreen shrub of the persimmon family. It was commonly known as the vase orchid. It was a dioecious plant. The male plant did not bear fruit after flowering, but the female plant could bear fruit. It was an excellent bonsai material for viewing leaves, fruits, and shapes. It was one of the representative species of Sichuan bonsai. There were the following key points when making a golden marble bonsai: 1. ** Tree stump selection **: Gold marbles are relatively easy to raise, but when choosing a tree stump, try to choose a tree stump that is vigorous and healthy. When shopping online, they had to confirm whether it was a real golden marble tree to prevent merchants from deceiving them with similar stumps. 2. ** Trimming and Soaking **: After buying the tree stump, you need to cut off a section of the cut at the root and trim the old and weak roots. The incision can be smeared with antiseptic to prevent infection. Don't rush to cultivate after trimming. Soak it in clear water for 1 - 2 days to let the roots absorb enough water, which is conducive to rooting and sprouting. 3. ** Potted Cultivation Stand **: - ** Planting time and flower pot selection **: Spring and autumn are the flourishing periods of plants, suitable for planting. The north was not suitable for planting, so when raising stakes, larger flower pots should be selected according to the size of the stump. - ** Selection of cultivation soil **: Clean and moist river sand can be used directly. The river sand can retain water and is conducive to tree stumps taking root. - ** Planting method **: When planting, try to raise the roots as high as possible to prevent the water at the roots from evaporating. After the roots survive, expose the roots. For oddly shaped tree roots, they could also be planted upside down according to the tree shape, but the normal planting of tree stumps would sprout more vigorously. 4. ** Branch Treatment **: If the environment is dry, the branches can be wrapped and sealed with plastic wrap from bottom to top, which can maintain heat and moisture, and promote the sprouting of new sprouts faster. When new sprouts were found on the stump, the plastic wrap around the new sprouts should be removed so that the new sprouts could grow. After the stump was completely alive, the plastic wrap could be removed. 5. ** Conservation environment **: After the tree stumps are planted, place them in a cool and well-vented place for maintenance. When the temperature is low in winter, move them to a warm environment. The golden marble liked a moist environment. During the maintenance period, the soil in the pot could not be too dry. It was necessary to water it frequently, and it was also possible to spray water around the plants and potted plants. In addition, the golden marble bonsai could also be made by digging up old piles with strange shapes. Digging was generally carried out in autumn or spring. The main root was cut off, while the side roots and the roots were kept. The upper branches were cut short appropriately, and the roots were kept moist during transportation. The stumps that were dug up needed to be nurtured first. They were placed in loose, slightly acidic soil with good drainage. The excess branches and leaves on the upper part were removed to reduce the nutrient supply and facilitate the growth of the roots. During the period of raising the pile, it should be in a warm and humid place without direct sunlight, but it should not accumulate water to prevent the root from rotting. After the old stakes survived, increase the light, reduce the fertilizer in the early stage, and pay attention to the growth of the branches. Cut off the branches that grow too fast in time. Golden marbles germinate strongly, and the branches are easy to coil and tie. The shape can be based on personal preference, such as straight stem, inclined stem, curved stem, and root. Most of them need to pay attention to the crown processing to ensure that they are full and elegant. Generally, they are shaped before they germinate in spring. The novel " Sitting and Watching Immortals " is equally exciting. Everyone is welcome to click and read it!

There were several ways to deal with bonsai fractures: 1. ** The situation of broken branches and skin ** - Immediately restore the branch to its original position, wrap it tightly with plastic film, and then use a longer dry branch to fix it at both ends of the fracture. If the branch has many leaves, some leaves need to be removed to reduce water vapor. After about two months, the broken branches can grow back together. 2. ** The situation of the branch being completely cut off **: The reference materials did not clearly state the treatment method, so it is impossible to give an accurate answer. 3. ** Cutting off the tree stump of the potted plant ** - ** Direction of the cut **: Most people cut the trunk at a 90° angle to the trunk, so the transition of the branches is unnatural. The better angle was that the section face and the trunk formed a 45° angle, and the section face was slightly concave. This way, after the section healed, it was easy to form a natural horse eye, which was natural and beautiful. - ** Section Smoothing **: Use a sharp and thin utility knife to cut the torn bark 1 - 3mm below the section at a 45° angle. Because the saw teeth would tear the bark when cutting the pile, which would greatly slow down the healing time of the cut, so smoothening was a must. - ** Sealing method of the incision **: - The traditional methods were to seal it with mud, wrap it with film, apply white rubber or paint, but the effect was generally not ideal. Wound healing agents are now recommended for the following reasons: - The wound healing agent with modern technology had good film forming properties and could lock in the moisture at the incision and prevent it from dissipating. - A good wound healing agent contained nutrients that could speed up the healing of wounds. - After using the wound healing agent to heal the incision, the horse's eye would be more beautiful. When using the wound healing agent, it was necessary to pay attention to the cross-section without water, otherwise it would not be able to adhere. Moreover, if the applied wound healing agent cracked after drying, it would be ineffective. The surface of the healing agent must be in a complete film shape after drying to have a protective effect. - It could also be used with tin foil during the process of applying the wound healing agent. That is, after applying the wound healing agent, it could be covered with a layer of tin foil, which could better protect the moisture loss of the incision, and also protect the wound from strong sunlight damage and avoid pest interference. The tin foil paper itself could protect the wound, promote wound healing, prevent the moisture in the tree from evaporating through the wound, and suppress the invasion of bacteria. The novel " Sitting and Watching Immortals " is equally exciting. Everyone is welcome to click and read it!

We can come up with the top ten varieties of potted bamboo as follows: 1. Rice Bamboo (also known as Guanyin Bamboo) 2. Square Bamboo 3. Purple Bamboo 4. Buddha's belly bamboo (also known as Luohan bamboo) 5. Qin, Si, and Zhu 6. Water Bamboo Phoenix Tail Bamboo Tortoise Shell Bamboo Xiangfei Bamboo Arrow Bamboo These species were very popular in the art of bonsai, and each of them had their own unique characteristics and ornamental value.

A bonsai's life story can be quite fascinating. Bonsai are miniature trees carefully cultivated by humans. They start as young saplings or cuttings. Gardeners shape them over time through pruning, wiring, and careful watering. Their growth is restricted in small pots, which gives them their unique miniature appearance. Bonsai can live for a very long time if properly cared for, becoming family heirlooms in some cases.

The North American holly bonsai was a very ornamental bonsai. The North American holly was native to the northeastern part of America and was very adaptable. Its characteristics were as follows: - ** Fruit-bearing and flowering period **: The flowering period occurs in spring and summer every year. In October, the fruit will slowly turn red and the leaves will gradually fall. The fruit can be hung on the tree all the time. The fruit-bearing period can last for more than 100 days and can last until May of the next year before blooming again. - Cold Resistance: Extremely cold resistant. Large North American holly trees can be planted in the open air in the north. They can safely survive the winter at-20 to-30 degrees Celsius. They can also be planted in the three northeastern provinces. Potted North American holly is recommended to be maintained in a place with good light, which is conducive to improving the quality of the fruit and the health of the plant. - ** Requirement for soil **: The requirements for the pot soil are not strict. 6 parts of river sand and 4 parts of yellow soil can be mixed as nutrient soil. The bottom of the flower pot can be covered with ceramsite as a water infiltration layer. It is suitable to choose a clay pot or a green mountain pot with good ventilation. The size of the flower pot is 5 cm larger than the flower soil ball. In terms of maintenance: - ** Fertility Management **: It requires a lot of fertilizer. It can be cultivated in loose and fertile decayed leaf soil. Long-term slow-release fertilizers such as sheep dung and eggs can be applied at the bottom of the soil. It could also be used as a fertilizer to prolong the time of fruit bearing and improve the quality of flowering. After the fruit falls off, the organic fertilizer can be applied once a month. During the flowering period, 0.2% Boron fertilizer solution mixed with water can be sprayed on the flowers and crowns to increase the fruit setting rate. - ** Watering Management **: Originally grew beside swamps, needs more fertilizer and water, but is also resistant to poverty. He could apply NPK compound fertilizer every three months and add nutrients when watering. This would make the North American holly grow better. It should be noted that the North American holly is androgynous, and planting one tree alone will not bear fruit. It was suitable to be placed in a corner of the house as an ornamental plant, whether it was placed outdoors or indoors (under ventilation and light conditions), it could grow, or it could be cut into branches and inserted into a vase with water. The novel "Winter in Hokkaido" is equally exciting. Everyone is welcome to click and read it!

The section of the bonsai was as follows: 1. ** Rod Cutting Option **: For the first time, if you want to ensure a higher survival rate, you can choose to cut the stem at the end. The cross-section of the stem at the end is relatively small, and it will heal faster during planting. In addition, under the condition of poor moisture preservation, it is less likely to cause peeling and cracking compared to the inclined end. In addition, 5 - 10cm of length could be reserved when the first cut was completed, so that it was convenient to smooth the cut surface after the sprout survived. After the cut surface of the live pile was smoothed, even if the cross section was slightly larger, it was fine. The cut surface was pasted with tin foil paper, which could quickly form the effect of healing the horse's eye during the growing season. If it was the first time to cut off the inclined section, it might cause stagnant water to appear at the section due to the reserved bud point not sprouting, which would cause the proportion of the cut rod to be unbalanced. However, it was also possible to cut the straight mouth into an inclined mouth to form a natural transition after the pile body survived. 2. ** Key Points for Intersection Treatment **: - ** Smoothness **: The section must be cut well to make it smooth. This is the key point of section processing. - ** Shape-trimming **: For large sections, use a tool to make a low and protruding concave spherical surface in the middle, and then stick tin foil on it to protect it from water and sunlight to prevent germs from spreading. Small cuts should be made into a concave section, which is conducive to the formation of a horse's eye. 3. [Sealing Treatment]: Sealing the incision can speed up the healing of the incision. 4. ** Use Scar Sticker **: Use a scar sticker of suitable thickness. It has good sealing effect, strong stickiness, and is not easy to fall off. It can always keep the cleansing part moist and accelerate the scab effect. It can also effectively prevent the water inside the tree from evaporating rapidly through the cut, preventing the bonsai from being damaged due to excessive dehydration. It also has anti-bacteria properties and can protect the tree from bacteria. 5. ** Tool processing **: You can use a hand-forged chisel (such as a chisel made of high-carbon steel and processed by high-temperature quenching process) to process the large section of the bonsai, make the relic rod, remove the rotten parts of the pile, etc. The processed section looks more natural, and there are multiple knife heads to choose from to meet various styling needs. The novel "Sitting and Watching Immortals" is equally exciting. Everyone is welcome to click and read it!